System.Data.SqlClient.SqlException:
The transaction log for database 'mydatabase' is full. To find out why space
in the log cannot be reused, see the log_reuse_wait_desc column in
sys.databases
I have my website on a web hotel and I only have limited access to my database. How can I solve this for now, and the future??
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.
SQL2005 SP2+Cum.Patch Rrevision 4 (9.0.3175)
I always get this message, when i want to run a stonger query or a transaction that takes a longer time:
"The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases"
I checked the log_reuse_wait_desc column: LOG_BACKUP
I ran tr log backup...nothing...
I tried to set to simple reco mode the db...this helped... temporaly...i got again below message.
( i wouldn't like to set to simple mode the db because the size of db is 160GB now....so i don't want to eun a fullbackup)
TempDB size is 50MB now and it can grow until 7GB.
The trqansaction log size is 14GB and there are 50GB free space, so it can grow.
This symptom occurs since i installed SP2 and the CP Rev.4.0
What is the real problem ?
Good evening all,
I am new to Microsoft SQL and have been dumped right into the deep end with an anchor around my ankles.
The problem I am experiencing is about 6 months back a guy setup a Microsoft SQL server at my client. He then took his bags and left. Then a developer developed an application which uses a database on this sql server. Everything worked well for around 4 months.
Yesterday IBM Director notified me that I am running dangerously low on disk space on the server. By the time I came in to work this morning I had 12mb free disk space. The evil thing here is the transaction log for the downtime database. It has grown to over 60gb, all because the correct measures were not implemented to prevent this.
The problem that is occuring is no one can do anything on the database now due to the lack of free space. I have tried reading the sql books online but due to my lack of sql experience and knowledge I am stuck.
Can someone please help me? What I would like to do is pull my transaction log down to an acceptable size.
I was thinking of creating a new database and then importing all the data from the current database and then just deleting the current database however am slightly concerned that this may result in some data being lost.
Thanks in advance,
Richard
Getting below error most of the times .
"Server was unable to process request. ---> The transaction log for database 'xxxx' is full due to 'REPLICATION'."
I am doing below steps to clear the log everytime.
1.EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0,@time = 0, @reset = 1
2.checkpoint
We had a siutation last night in our production environment that forced us to revert back to an earlier version of the database (before a major code rollout that failed). After restoring the days full backup (with NORECOVERY), and then restoring a DIFF backup (FULL RECOVERY and had checked Preserve Replication Settings)...the transaction replication failed.
Message #1
The replication agent has been successfully started. See the Replication Monitor for more information.
Message #2
2011-03-04 15:07:17.566 Copyright (c) 2008 Microsoft Corporation
2011-03-04 15:07:17.566 Microsoft SQL Server Replication Agent: logread
2011-03-04 15:07:17.566
2011-03-04 15:07:17.566 The timestamps prepended to the output lines are expressed in terms of UTC time.
2011-03-04 15:07:17.566 User-specified agent parameter values:
[code]....
I've tried reinitializing the publication/subscription and while that took brand new snapshots and copied it over to the replicated data server, it did not fix the problem.I read from a different post that I could try running "sp_replrestart" but that ran for about a half an hour and didn't appear to do anything but fill up our log files...did I not wait long enough?
The only thing I know to do at this point is to drop the publication on the production server and rebuild it completely (and with all the tables we're replicating that would take quite a bit of time.
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedHow can I clear some logs in the transaction log?
I also found some solutions that must run DBCC. How to run DBCC in SQL Server 2000?
Thank you.
I have a transaction log which is 1 Gb and only has about 40 Mb free. When I run DBCC loginfo I find the first active log dates back to the middle of August. Does any one have any suggestions on the best way to approach this situation. How can I query the transaction log to find out what the old transactions are? I was going to use the detach database, rename log, attach database to shrink the log but don;t want to do this incase there is active data in the log. We are doing hourly log dunps.
Thanks
Grant
Hi all
I found that my transaction log is beig filled up and I tried to truncate it from DB properties window
and I failed.
I want to know how to truncate it and how to prevent it from growing up untill it's filled
Thanks
Mohamed
Our transaction log filled up the hard drive on the server and we are looking for a quick and easy way to delete it. Any ideas? We can't easily back it up because it is over 10500 meg in size.
View 4 Replies View RelatedHi,
I need help fast. I have a SQL Server 6.5 SP2 database that is 5000 MB and the transaction log is 1000 MB the log is 98 % full but will not truncate. I have tried all the truncate commands (Truncate only, no_log, DBCC) but it will only trucate the log like 10 MB.
Dose anyone know how to truncate this log??
Any help will be appreciated.
Thanks in advance for you help.
I have a problem with the transaction log of a database. when i truncate it and check the properties if says there are 0 MB available even though it is allocated 300 MB. this seems to be causing alot of problems.
Any idea why the log will not truncate??
regards
ML
I am getting an error when I try to DTS data to a database that
the transaction log is full.
I do: backup transaction db_name with truncate_only,
but I still get the error.
Any ideas on how to resolve this are appreciated.
Kellie
How do i empty transaction log? create another file and delete the other? or use dbcc shrinkfile or dbcc shrinkdatabase, w/c both im confused too.
View 2 Replies View RelatedHi there,
I'm still fairly new to SQL server and I've just ran into a problem when dropping some tables from my DB as my transaction log has become full. I looked at books online and it basically said to backup the log so it will also truncate the log. However I've ran out of disk space on my data drive so can't take a backup.
Is there a way to just truncate the active log to shrink the size?
Hope you can help??
Thanks
S
Today, one of our backups failed due to the transaction log being full. I expanded the transaction log and then the backup completed normally. For a short term resolution, I increased the maximum allowed size on our transaction log files.
We are doing a database backup only as follows:
backup database xxxxx to xxxx_data with init
I did find a note stating that the transaction log will eventually become full if doing a transaction log backup only. We do not generate a lot of transactions so I had not seen a need to backup the log during the day. The full database backup is done daily.
My question is, in order to permanently resolve this error do I have to:
- take a transaction log backup as well. Should I take it take right after the full database backup or at some later point.
- do I have to schedule/run the shrink database command.
iHi everyone
I have a big transaction log took over all the disk space, I know I can backup the log to free the space but my backup drive is on the same drive. Is there any other way to clean the Transaction log without backing up?
Thanks so much!!!!!!!!!!!!!
I was trying to create a table on a Database and it gave me this message:
'tblSuggestion' table - Unable to create table. The transaction log for 'Database' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
And I don't see the log_reuse_wait_desc column anywhere.
Any ideas?
dave
Hi,
At the start, transaction log size is 1MB. at the middle of the dts it reached to nearly 2 GB. I encountered this error in DTS:
OnError,,,CallerType, CallerChannel, Dealer, DODealer, HotlineType, Model, Reg'l Signal Code, Account, Contact,,,10/22/2007 10:55:43 AM,10/22/2007 10:55:43 AM,-1071636471,0x,SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The transaction log for database 'DB1' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases".
I visited the sys.database's log_reuse_wait_desc and it is set to checkpoint.
The transaction log keeps getting full in the middle of the dts, not enough to do the 1 round execution of the dts. What to do with this one? Anything that i need to add in my dts to truncate the logs?
cherriesh
hi,
if my transaction log is full, do i need to execute only this command to truncate old logs?
DBCC SHRINKFILE(<dbname>, 1)
BACKUP LOG <dbname> WITH TRUNCATE_ONLY
DBCC SHRINKFILE(<dbname>, 1)
Should I use the same command as a daily maintenance to my transaction log?
cherriesh
Well, when I start thinking: I got it all, I run into a new problem.
I'm trying to execute a package that contains several (7) sequence containers each of them deleting all the records from 7 tables and inserting new rows.
I get the following error:
The transaction log for database 'MyDB' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
What the heck?
Hi guys,
I am developing this site http://www.onlineacademicadvisor.com and having DB problems for the 3rd time in a row.
Whenever the traffic on the site is getting bigger, the transaction log becomes full and no user can login. This problem is described at http://support.microsoft.com/kb/317375 From there, I got the feeling that the problem occurrs if transactions are not committed and last for too long.
However, I do not have any explicit transactions, just the usual select, insert, update statements in stored procedures. I do not call COMMIT (or RETURN) explicitly at the end of my stored procedures though. My stored procedures are short.
Have you got any ideas about what can cause the problem? I really have not idea what that could be.
Your help is much appreciated.
Besides restarting and expanding, is there a quick way to remedy the error:
"The log file for database 'tempdb' is full. Back up the transactional log for the database to free up some log space."
But, you can't back up a tempdb, so I was wondering if anyone had some thoughts on this.
Thanks
Hi,
I have an urgent problem.
My transaction log is full.What can I do?I can't stop the server.It's on production.
Please suggest.It's urgent.
TIA
Has anyone ever run across you Tempdb Transaction Log being full and getting an error 9002 severity 17 state 2? One issue is the tempdb was created with all the defaults 1mb in size. As well as my transaction log is now at 4 GIG in size.
View 4 Replies View Relatedwhen i try to delete the records it gives the errror
suggest me how to deal with this problem
=====
Msg 1105, Level 17, State 2
Can't allocate space for object 'Syslogs' in database
'armaster' because the 'logsegment' segment is full. If you ran out of
space in Syslogs, dump the transaction log. Otherwise, use ALTER DATABASE
or sp_extendsegment to increase the size of the segment.
Hello,
I have a process that failed with the following error message. The SQL server error messages also said the Transaction log was full and there was not enough disc space.
Strangely, when I checked all the drives on the server, there was plenty of free space, the smallest amount free on one drive, where SQL server is located was 20GB. I am confused.
I backed up the DB to another server and deleted a lot of the transaction logs and now the drive has 30GB and is okay.
Does anyone know how the transaction log fills up? Can I change a setting somewhere to increase the maximum size of the transaction log? Or maybe change the location where it is saved to another drive? Or have it automatically cleared out every once in a while?
Any of your input is greatly appreciated.
Thanks.
Rodney
--------------------------------------------------------------------------
DS-DBMS-E400: UDA driver reported the following on connection 'Data Target
(ODBC)':
DMS-E-DBPARSER, The underlying database detected an error during processing of
the SQL request.
[Microsoft][ODBC SQL Server Driver][SQL Server]The log file for database
'ancosalesdm' is full. Back up the transaction log for the database to free up
some log space.
(for details, see Build_SAL_FA_ShipSKU_0584.log)
[PROGRESS - 00:32:42] Build Node 68 'SAL_FA_ShipSKU'; failed
DS-DBMS-E400: UDA driver reported the following on connection 'ALIAS_00DF1E74':
DMS-E-GENERAL, A general exception has occurred during operation 'execute
immediate'.
The log file for database 'ancosalesdm' is full. Back up the transaction log
for the database to free up some log space.
DMS-E-GENERAL, A general exception has occurred during operation 'execute
immediate'.
General SQL Server error: Check messages from the SQL Server.
DS-DBMS-E400: UDA driver reported the following on connection 'ALIAS_00DF1E74':
DMS-E-GENERAL, A general exception has occurred during operation 'rollback
transaction'.
The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
DMS-E-GENERAL, A general exception has occurred during operation 'rollback
transaction'.
General SQL Server error: Check messages from the SQL Server.
--------------------------------------------------------------------------
Am working with SQL Server 2005..I am trying to shrink the log file of the database.. Apparently, the name of the database, log and mdf is the same.
Used this code
USE gprddevelopment
GO
DBCC SHRINKFILE(<gprddevelopment>, 1)
BACKUP LOG <gprddevelopment> WITH TRUNCATE_ONLY
DBCC SHRINKFILE(<gprddevelopment>, 1)
GO
[code]....
I am running a website with a SQL Server database attached.My transaction logs are full and my hosting co. won't allocate moredisk space for me.I need to delete my database transaction logs and asume I will need torun an SQL script to do this.Problem: I do not have MS Enterprise Manager of any database utilityon my website apart from MS Access. Where can I download a free SQLtool that I can use to delete the transaction logs from my database.Any help appreciated.ThanksFrancois Terblancheverismall.com
View 2 Replies View RelatedHi All,My SQL server transaction log is getting bigger every day and my HDD ifrunning out of space.So i follow the MS KB about how to Shrinking the Transaction Log.After doing so the log is much much smaller as i can see the size of itunder enterprise manager.The problem is that the HDD still shows the same size.If i shrink the DB why the and reduce its size why the HDD does notshows it?Is there a way to clear the size from the HDD?Thanks All
View 3 Replies View RelatedI have set the initial size of the log file for a database to 1M, themaximum size is unrestricted, and the increase rate is 10%.However, when I attempt to delete thousands of rows, the error is stillreported that the transaction log file is full. Why can't the log fileincrease automatically?*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
View 3 Replies View RelatedPlease correct me if I am wrong with this:
I am using SQL Server 2000, when I do a backup I use the database maintenance plan at enterprise manager. I select my database and then I schedule the complete backup and transaction log backup to "everyday at 22:00:00"
My question is, do I really need to do the transaction log backup? If I am not wrong with the complete backup I can already recover all my data, the transaction log backup is useless if done at the same time that I do the complete backup, right?