When I use sa to log into one of my database , it give me the following error: The user is not associated with a trusted conncections. error code: 18452, please tell me how to solve this problem.
I appreciate your help.
I received the above error yesterday and haven't been able to trace it to any job or process running. We haven't implemented any changes to the server in the past few months, and it doesn't look to be a user-established connection, since the Client IP Address of the SSPI handshake error is from the server itself.
I logged this set of messages in SQL AgentServer error log:
Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]
Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[382] Logon to server '<server>' failed (ConnAttemptCachableOp)
Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 17806, Severity: 20, State: 2.
Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed. [CLIENT: <IP Address>]
Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 18452, Severity: 14, State: 1.
Any help in explaining this would be greatly appreciated.
Hello,
I have a problem that I hope anyone here can help me with. We have a new server with Windows Server 2003 installed as well as MS SQL Server 2005. Both of these are freshly installed with default options set. The server is configured to accept both windows certification and SQL server certification (mixed), and our company has a domain setup. This server will be used for internal development, so all of the necessary people have an administrator account on the domain, which is uploaded currently into SQL Server's Security > Users folder. When I am on the server itself, I can log in using my domain name with no problem, as well as sa. However, when I try to connect to the server remotely (by my machine down the hall) using Windows Authentication I cannot. The server has BUILTINAdministrators set up for users, as well as 'sa' and whatever other defaults were there.
I CAN connect using sa remotely on my machine, though, after I enabled the account. The error message I get when I try to log in through Windows Authentication is:
*********************************************
TITLE: Connect to Server
------------------------------
Cannot connect to LAF-SQL1.
------------------------------
ADDITIONAL INFORMATION:
Login failed for user '(null)'. The user is not associated with a trusted SQL Server connection. (Microsoft SQL Server, Error: 18452)
*********************************************
No other options other than what I've mentioned are installed. The (null) is not present, but the error message shows up as two single quotes ''. I strongly suspect there is a security option set by default somewhere in WinServer or SQLServer that does not permit remote connections, but I do not know where.
Help would be greatly appreciated here.
-Matt
Hi all,
View 14 Replies View RelatedLogin Failed for user , the user is not associated with a trusted sql server connection. (microsoft SQL Server,Error:18452)
hi ,
i am getting the above error message once in a while maybe two or 3 times a week , and then it goes away in 10 to 15 minutes or 5 minutes ,
our mode is set to mixed and we are able to connect and use both sql and windows , but once in a while , it will give us the above message when we try connecting throught sql server management studio client (using sql 05) using windows login , although it lets us connect using sql login while the windows login is denied, and after a while it lets us connect with both.
occurs randomly on some days , we run our servers on VM ware virtual machines using windows 2003 r2 enterprise 64 bit with sp2 with esx 301 virtual machine.
would appericate any feedback on this thanks
Hi
Last week I was receiving an error when trying to connect to two of our seven sql servers from my laptop via my domain admin account. The only fix was to have my laptop rebuilt and everything re-installed.
Today however another administrator is starting to have the same problem but to only one of the seven servers!
When that administrator uses my laptop with her domain admin account it works!?
What could possibly be going wrong with our laptops? We have not installed or changed anything.
The full error message we see:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. (Microsoft Sql Server, Error: 18452)
The error being logged on the server: (two errors are logged each time)
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 53.35.165.148]
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 53.35.165.148]
Can anyone give a quick description of the meaning of this message andwhat needs to be done to get a connection.I'm running DBArtisan with SQLServer 2000 client SP4 installed.I also get the same message with MS Enterprise Manager so this iscoming out of the actual ODBC connection attempt.Thanks in advance!
View 1 Replies View RelatedUsing sql2005 on a Novell network...
When attempting to log into Mgt Studio using windows authentication I am getting the error: Error 18452 (not associated with a trusted sql server connection) .
I added my domainuserName in sql with no problems and added the account to the sysadmin server role. However, I noticed my credentials on my pc are not listed as domainuserName but rather ComputerNameUserName. I think this is what is causing the problem but I am not sure. Can anyone lend a hand?
I'd appreciate any help,
Thanks.
Scott
Hi to all.
I'm trying to log in on local machine to my SQL Server 2005 (in Windows Server 2003) using a user not trused, like as 'sa' user, but I receive the error Login failed for user 'sa'. The user is not associated with a trusted SQL Server connection. (Microsoft SQL Server, Error: 18452).
No problem to connect with trusted user (my logon user to operating system).
I set the auth mode to SQL Server & Windows but doesn't work.
What can I do?
Ciao.
Mircrosoft recommends that you change the authenication from Windows Authenication to SQL and Windows Authenication. This will allow users to gain access to the SQL server.
Here's a real puzzler. I have a remote SQL Server running on a different domain than the one I am logged in to. From my own PC, logged in as myself, I can create an ODBC connection to this remote server (using integrated authentication) with no problem. When I log in to any other PC as myself, I get the "28000 (18452) Not associated with a trusted connection" error. This would therefore seem to be a PC-specific problem, but I can't see any difference between the PCs. All PC's are running the same version of MDAC.
Firewall is down, no proxy is involved, and I have given myself Administrative privelege on the PCs.
Can anyone explain this? Thanks in advance.
All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode. I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem?
my connection string: <connectionStrings>
<add name="ConnectionString" connectionString="Data Source= server name ;
Initial Catalog=FILESHAREDB.MDF;
Integrated Security=false;"providerName="System.Data.SqlClient"/>
</connectionStrings>
Server Error in '/SendItNow' Application.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:
Line 41:
Line 42: 'open the connection and execute the stored procedure
Line 43: mConnection.Open()
Line 44: mResourceID = mCommand.ExecuteScalar()
Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb Line: 43 Stack Trace:
[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ResourceDB.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message, Int32 ID) in H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb:43
Resource.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message) in H:MIS DepartmentIntranetSendItNowApp_CodeBllResource.vb:31
ContentFiles_Default.ImageButton1_Click1(Object sender, ImageClickEventArgs e) in H:MIS DepartmentIntranetSendItNowContentFilesDefault.aspx.vb:33
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I'm trying to connect to a SQL Server database from a web app programmed in C#/ASP.NET. It's throwing an exception that says "Login failed for user 'CISUser'. The user is not associated with a trusted SQL Server connection."
I've searched around for solutions to this problem and the only one I've come across is to change the authentication mode in the SQL Server Management Studio from "Windows Authentication" to "SQL Server and Windows Authentication". But on my machine, it's already set to "SQL Server and Windows Authentication". I've restarted the server and still I'm getting the same issue.
Hi I've got a common error using SQL server 2005
"The user is not associated with a trusted SQL Server connection"
I'm building a application using C# when using a standalone environment, it worked well. But, now I have the following environment.
A.
SQL server
Domain XXX
B. Remote machine
Application
Domain YYY
I changed SQL server to support SQL and WIN authentication mode and I have changed SQl server surface area configuration to support TCP/IP and Named Pipes for remote connections. But I still have two problems:
1. When using the IP - serverName of the dataserver, the error is
System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection..
1. When using the server name(MYServerName), I have this error:
System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
Besides, I have tried from my remote machine to use a sqlcmd -E -S tcp:myhost command but I have the same answer.
Any help, I will thank.
Hi, I have installed MS SQLExpress 2005 on our test sever (W2K3), not a domain controller, created a database and added some tables. I am using this connection string in a asp script but get the following error when trying to connect to the database.
strAsgSQLConn = "Provider=SQLNCLI; Server=BENDERSQLExpress; Database=myasg; Uid=Admin Pwd=password"
Microsoft SQL Native Client error '80004005'
Login failed for user 'Admin€™. The user is not associated with a trusted SQL Server connection
The account I am using is the server admin account. I have installed QL Server Management Studio Express on both the server and a client PC and can connect to the database from both fine. I have tried setting the security on SQLExpress to both Windows Authentication and SQL Authentication but neither works.
Cheers
John D
can any one help
View 3 Replies View RelatedHi,
I have a copy of VS2005 and i have installed the Microsoft SQL Server Developer Edition
I am trying to do my first connection using ASP.net (yay for me...) and it has failed...with this error..Login failed for user 'testuser'. The user is not associated with a trusted SQL Server connection.
can someone please point out why? yes i know that the error seems pretty straight forward but how do i fix it? like how do i make the user a trusted server connection? where do i do it? and what are the steps? the user is an administrator and by rights should have all access to everything....
connection string
SqlConnection MySQLConnection; MySQLConnection = new SqlConnection("server=cmptrname\databsename;uid=testuser;password=password;database=mytest");
btw while your reading do you have any examples of opening a db with the connection string in the web.config file? because i get some error "connection string has not been initialised" using the
system.Configuration.ConfigurationManager.AppSettings.Get
i though i would stick to the top code first before i tackled the web config error first....
Thanks heaps
Hi all,
I am new in asp.net. In my web.config file, I wrote the connection strings as below and then I got the above error. I already changed SQL server Authentication mode to "SQL server and Windows". Any idea? Thanks in advance.
<connectionStrings>
<remove name="LocalSqlServer" />
<add name="LocalSqlServer" connectionString="Data Source=xxx;Initial Catalog=mydb;User ID=test;Password=test;Persist Security Info=False;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Our server has integrated security setup, upon startup of the server,
we have a continuous flow of error msg:
Login Failed: Reason: User '_' not defined as a valid user of trusted
connection.
The timing of these messages only around 30 seconds apart
The only incident from Technet I can find is Q186314, but we don't have replication setup, anyone knows where I can look into ?
I recycle the server but didn't help.
I appreciate any help I can get ..
Thanks.
I cant find a reason why its doing this
Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.
I cant find a reason why its doing this
Code Snippet
Login failed for user 'KOQuotes'. The user is not associated with a trusted SQL Server connection.
Hi All,
We have setup a SCOM 2007 Server and in this we have SQL 2005 SP2, We are using two accounts one for OPRATIONAL DATABASE and another one for REPORTING DATABASE after this setup everything was working fine but suddenly my SDK account which is for REPROTING DATABASE was locked by entering wrong password and afterwards I unlocked the password but SINCE this i'm not able to connect to my REPORTING DATABASE and i'm getting following ERROR:- Login Failed for user 'username'. The user is not associated with a trusted SQL Server connection.
Taken following action to rectify this problem:
1) Resetting the SDK password with the same password.
2) Restarted all the SQL and SCOM services.
3) Restarted the Server as well.
4) Converted from WINDOWS AUTHENTICATION mode to MIXED mode.
But the problem is still persisting, Please help ASAP.
Regards,
Akhilesh
Hi,
i'm a newbie in SQL. I can't connect to SQL 6.5 server using ASP ADO. Below is the program code
<%
set conn=server.createobject("adodb.connection")
conn.open "dsn=Central;uid=sa;pwd="
%>
An error message appears
Login failed- User: Reason: Not defined as a valid user of a trusted SQL Server connection.
I've already created a ODBC System DSN named Central
parameter Server Local and used Trusted connection checked.
Then under sql Manager there is a sa with a blank password.
Please help.
We are looking at developing an SQL Server 2005 Database and I would like to use Windows Authentication rather than SQL Server Authentication to connect our client app.
In our development environment, we have two Servers, one being used as a file server and the other as an SQL Server. We have now set up a domain using the file server as the domain controller. (We had previously been set up to use a workgroup).
I have set up an active directory group called SqlDevelopers and added an active directory user called Jonathan to it.
On the SQL Sever, in management studio, I have set up a new server login which uses windows authentication called DomainSqlDevelopers. I used the GUI to verify I could see the domain and the group.
The default database is set to a test database on the server. A user in the test database is mapped to the DomainSqlDevelopers and given the Roles dbo, db_datareader, db_datawriter.
To test the log in, on the server, I logged out as administrator and in as Jonathan. I could successfully access the server through management studio using windows authentication.
However, if I log in as Jonathan on my client PC and try to access the SQL Server using management studio and windows authentication, I have problems.
The first time I try I will get a timeout error. If I try again will get either:
Login failed for user ''. The user is not associated with a trusted SQL Server connection
Or
Cannot generate SSPI context
I can€™t determine any pattern to which of the above errors I get.
However, if I log in as administrator on my client PC, I can connect to the server using management studio and windows authentication.
Sounds like Active Directory/Domain or other Network issue (Not really my area). I would be grateful for any help.
Thanks,
Jon
Hi all,
Can someone explain it to me why I am getting the following error when I try to connect SQL server express with .NET 2.0?
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Here is my code and i am using windows authentication:
<%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %>
<%
Dim connAkaki As SqlConnection Dim cmdSelectAuthers As SqlCommand Dim dtrAuthers As SqlDataReader connAkaki = New SqlConnection("Server=.SQLEXPRESS;database=akaki") connAkaki.Open() cmdSelectAuthers = New SqlCommand("select Firstname from UserTableTest", connAkaki) dtrAuthers= cmdSelectAuthers.ExecuteReader() While dtrAuthers.Read() Response.Write("<li>") Response.Write(dtrAuthers("Firstname")) End While dtrAuthers.Close() connAkaki.Close() %>
I've seen many, many, many, many posts regarding this topic - but none have been able to fully explain nor fix my problem.I've developed a security solution according to Scott Gu's guide and it works great - but only on my local machine running VWD and SQLExp2005. Once I move this application it completely breaks in the productions environment. Today I managed to get it halfway there. I created a SQL login and changed my web.config to use these credentials - now the web application will come up, but none of my links (that are role based) are displayed - most likely because i'm authenticating as the SQL credentials instead of me. So I switch it back to windows authenticated, as it is on my laptop, and it breaks again. Please tell me theres a way to get this working in production and Scott's fantastic tutorial hasn't wasted me 2 weeks of work. Here's the exact error I get when using Integrated authentication:
Server Error in '/Contracts' Application.
Login failed for user ''. The user is not associated with a trusted SQL
Server connection. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Login failed for user ''. The user is
not associated with a trusted SQL Server connection.Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.] System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +437 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlRoleProvider.GetRolesForUser(String username) +771 System.Web.Security.RolePrincipal.IsInRole(String role) +272 System.Web.SiteMapProvider.IsAccessibleToUser(HttpContext context, SiteMapNode node) +194 System.Web.SiteMapNode.IsAccessibleToUser(HttpContext context) +14 System.Web.StaticSiteMapProvider.GetChildNodes(SiteMapNode node) +348 System.Web.SiteMapNode.get_ChildNodes() +23 System.Web.SiteMapNode.get_HasChildNodes() +4 System.Web.SiteMapNode.System.Web.UI.IHierarchyData.get_HasChildren() +4 System.Web.UI.WebControls.Menu.DataBindRecursive(MenuItem node, IHierarchicalEnumerable enumerable) +4225 System.Web.UI.WebControls.Menu.DataBindItem(MenuItem item) +277 System.Web.UI.WebControls.Menu.PerformDataBinding() +117 System.Web.UI.WebControls.HierarchicalDataBoundControl.PerformSelect() +82 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.Menu.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.Menu.EnsureDataBound() +29 System.Web.UI.WebControls.Menu.OnPreRender(EventArgs e, Boolean registerScript) +21 System.Web.UI.WebControls.Menu.OnPreRender(EventArgs e) +22 System.Web.UI.Control.PreRenderRecursiveInternal() +77 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.42;
ASP.NET Version:2.0.50727.42
Hello,
I just got a copy of a website I was supposed to be working on. I went to the web.config file changed the machine name to my machine's name and when I try to run the program I get the following error. Could someone give me some advice on how to fix this ?
Thanks!
Hi
I'm making a website and will upload it next via ftp but i need to access the local server for database retrieval from this website. i'm doing so first time so not sure about its working and isues. Through google search and from forums i collect some info to work on it. now i have made a connection string to access remotely that gives the following error when i make the connection open
"Login failed for user ''. The user is not associated with a trusted SQL Server connection."
the local server use the windows authentication mode or may be the mix mode.
Please any one can help me about this issue and further information related to it. and one more question, how much time a page takes to load while getting 600 records from a table in local server.
thanx in advance
Arrgh! I've check and to make sure SQL Server and Windows Authentication option is selected. The user has Grant access to connect to database engine and Login is enabled...and also has database read/write privs. I can login using the username/password from Mangement Studio Express, but I can't from my app. Here is my web.config:
<connectionStrings> <add name="CPT_ConnectionString" connectionString="Data Source=192.168.1.40ccsql1;Integrated Security=SSPI;" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <identity impersonate="true"></identity> </system.web>
The only thing I can think of is that my app is using a DSN to connect to the database. Any ideas?
Many thanks,
Mark
Hi to all......... In my project I am using windows authentication and if I am running through the IIS getting this error. Suppose if I am directly run the project or use server authentication then I wont get this error.My web.config file is <?xml version="1.0"?><configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings> </appSettings> <connectionStrings> <add name="ConnectionString" connectionString="Server=Myserver;Database=MyDB;Trusted_Connection=Yes;"/> </connectionStrings> <system.web> <authentication mode="Windows" /> <identity impersonate="false"/> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> </controls> </pages> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <customErrors mode="Off"/> <compilation debug="false"> <assemblies> <add assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> </assemblies> </compilation> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> </httpModules> </system.web> <system.web.extensions> <scripting> <webServices> <!-- Uncomment this line to customize maxJsonLength and add a custom converter --> <!-- <jsonSerialization maxJsonLength="500"> <converters> <add name="ConvertMe" type="Acme.SubAcme.ConvertMeTypeConverter"/> </converters> </jsonSerialization> --> <!-- Uncomment this line to enable the authentication service. Include requireSSL="true" if appropriate. --> <!-- <authenticationService enabled="true" requireSSL = "true|false"/> --> <!-- Uncomment these lines to enable the profile service. To allow profile properties to be retrieved and modified in ASP.NET AJAX applications, you need to add each property name to the readAccessProperties and writeAccessProperties attributes. --> <!-- <profileService enabled="true" readAccessProperties="propertyname1,propertyname2" writeAccessProperties="propertyname1,propertyname2" /> --> </webServices> <!-- <scriptResourceHandler enableCompression="true" enableCaching="true" /> --> </scripting> </system.web.extensions> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </handlers> </system.webServer></configuration>Thanks Abins Muhammad
View 3 Replies View RelatedHi,
How to handle "Login failed for user 'sa'. The user is not associated with a trusted SQL Server connection."
when i was access to web page. I want to on sql server authecation mode.
hello
i am working on a web application where the application and data base are not on the same serverso when trying to connect to the data base from the web application using windows authentication i got that errorLogin failed for user ''. The user is not associated with a trusted SQL Server connection. when i used user id and password the problem solvedcan any one tell me how to make my application run using windows authenticationone thing else ;this problem raised after another issuse came from the network that the server is not able to resolve the address or ip of the serverbut that problem solved suddenly and left the above issue
I have a windows 2003 server hosting MS SQL Server 2005. Another windows 2003 server hosting my App, and clients from the local intranet and outside (web). How do I surpass this problem, when it all works fine locally on my development machine?
View 2 Replies View Related