The Version Of Component **** (11773) Is Not Compatible With This Version Of The DataFlow.
Dec 12, 2007
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
View 16 Replies
ADVERTISEMENT
Sep 4, 2007
I have several versions of one SSIS Dataflow component. I need to bind some of them( definite version) to my SSIS package. How can I do that?
Thanks in advance.
View 5 Replies
View Related
Mar 18, 2008
I'm currently using the evaluation version of SS2005 and would like to use PerformancePoint with Analysis Services. PerformancePoint requires the cumulative update package 3 for SQL Server 2005 Service Pack 2, or Build 3186, according to the documentation. The version for SS2005 is the following:
MSSQLSERVER
Analysis Services
[Version: 9.00.1399.06 Edition: Enterprise Evaluation Edition Patch level: 9.00.1399.06 Language: English (United States)]
The same version, patch level is repeated for all of the SS2005 components. Do I have a compatible SS2005 version for PerformancePoint.
Thanks,
Tom
View 5 Replies
View Related
Oct 26, 2007
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
View 7 Replies
View Related
Jan 23, 2007
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
View 4 Replies
View Related
Jul 29, 2007
I tried to install SQL SERVER 2005 through SQLEVAL64 (IA64) on Window vista 2007, Intel core 2 duo processor. Like many other software (including my lexmark printer driver), SQL SERVER 2005 does not seem to be working. Anyone has any work around solution or had similar experience ?
View 4 Replies
View Related
Mar 19, 2008
while connecting to Reporting Services from Mangament Studio getting following error
"The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.SqlServer.Management.UI.RSClient)"
any ideas???
View 8 Replies
View Related
Sep 27, 2007
Locally I develop in SQL server 2005 enterprise. Recently I recreated my db on the server of my hosting company (in sql server 2005 express).I basically recreated the tables and copied the data in it.I now receive the following error when I hit the DB:The 'System.Web.Security.SqlMembershipProvider' requires a
database schema compatible with schema version '1'. However, the
current database schema is not compatible with this version. You may
need to either install a compatible schema with aspnet_regsql.exe
(available in the framework installation directory), or upgrade the
provider to a newer version.I heard something about running aspnet_regsql.exe, but I dont have that access to the DB. Also I dont know if this command does anything more than creating the membership tables and filling it with some default data...Any other solutions/thought on what this can be?Thanks!
View 4 Replies
View Related
Sep 1, 2014
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
View 4 Replies
View Related
Jul 25, 2006
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
View 1 Replies
View Related
Feb 19, 2008
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies
View Related
Oct 30, 2007
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies
View Related
Mar 11, 2006
Hi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
View 7 Replies
View Related
Jan 7, 2008
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to back up file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file],
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to backup file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file]',
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Does anyone have any suggestions?
View 1 Replies
View Related
Jan 31, 2007
Want to upgrade Evaluation version of SQL 2005 to full retail version. How would I do that. Thanks very much for your hel
Sam Commar
View 1 Replies
View Related
Sep 22, 2015
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
View 3 Replies
View Related
Jul 16, 2007
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
View 4 Replies
View Related
Apr 12, 2008
Hello everybody!I'm using ASP.NET 3.5, MSSQL 2005I bought virtual web hosting .On new user registrations i have an error =(The 'System.Web.Security.SqlMembershipProvider' requires a database schema compatible with schema version '1'. However, the current database schema is not compatible with this version. You may need to either install a compatible schema with aspnet_regsql.exe (available in the framework installation directory), or upgrade the provider to a newer version. On my virtual machine it work fine but on web hosting i have an error =(What can you propose to me?
View 2 Replies
View Related
Apr 20, 2007
We want to licence a trail version 2005 EN with an fullversion of MS Sql server 2005 EN. Is that possible?
Conworx
View 4 Replies
View Related
Dec 7, 2007
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
View 3 Replies
View Related
Mar 12, 2007
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
View 4 Replies
View Related
Nov 8, 2007
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
View 1 Replies
View Related
Apr 11, 2004
Hello,
I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development".
How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict?
Thanks,
View 1 Replies
View Related
Nov 12, 2007
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
View 5 Replies
View Related
Apr 27, 2006
I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Please help.
Mike.
View 7 Replies
View Related
Mar 18, 2002
Can I set up sql server 7.0 standard version in cluster enviorment, what the
different betwent sql server 7.0 enterprise version and standard version? any problem I may encouter when I install the SQL server 7.0 standard version in Cluster enviorment?
Thank you very much.
Judy
View 1 Replies
View Related
Apr 2, 2008
Hi Guys,
We have a Sqlserver 2005 Installed on One of our servers.I wanted to know whether the installed database is a Evaluation copy or Licensed Copy.How to Evaluate this.
Do we have to check any Log files etc for knowing whether it is evaluation copy or Licensed copy.
Please help me Asap.
thanks in Advance
Regards
Arvind
View 6 Replies
View Related
Jul 23, 2005
Does anyone know how to get SQL Server versions, Service pack versionsand the Server that instance of SQL is running on a network. I haveseen some threads on how to list SQL servers in a network but I need tofind more info about these SQL servers.Any help appreciated..!Thx...
View 1 Replies
View Related
Feb 23, 2007
is there a tsql or stored proc to find when was the sqlserver got upgraded from 2000 to sqlserver 2005?
thanks in advance
View 1 Replies
View Related
Aug 18, 2006
we have a backup of a database from a release version with version number 9.00.1399 and we wanted to restore it to a server with version number (9.00.1116) CTP release. we were issued a version incopatibility message. is it possible to backup from a 9.00.1399 release with a backup file compatible for a CTP release, is there an available option during backup? thanks!
View 3 Replies
View Related
Mar 30, 2006
I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
View 7 Replies
View Related
Jun 17, 2007
I ask because I was testing a Source Control solution that uses SQL Express for its database component, and when I tested it in March it worked fine, but now I can't get the Source Control software to recognize that the database is there. It creates it just fine, it just can't seem to look inside the database instance.
I've tried manipulating ports, assigning permissions, browser on, browser off, I've been at this for about a week.
The Source Control software provider won't provide any information on configuring SQL Express, so I'm here.
.MW
View 3 Replies
View Related
Aug 14, 2007
This is trivial I'm sure but I'll be dogged if I can find someone who mentions how to do it. I am attempting to develop a Data Flow Transformation that appends a new column (a string value) into the current stream.
I have found plenty of references on how to replace an existing column but I'd really like to just add my new column in there. It doesn't need to be configurable, it can be a static column name. I'll take a solution that allows the column name to be set at design time, don't get me wrong but the magic I'm looking for is how to implement a new column in a stream.
Yes, I am well aware of the derived column task but I will be replacing a few hundred instances and I'd much rather just drag an item onto the designer than to drag a derived column, double click it, type in the column name, set the expression and then set the datatype, etc.
Anyone spare a moment to enlighten me?
Pardon the lack of formatting, this BB doesn't play with Opera (I know, I'm a heretic)
using System;
using System.Collections;
using System.Runtime.InteropServices;
using Microsoft.SqlServer.Dts.Pipeline;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using Microsoft.SqlServer.Dts.Runtime;
namespace Microsoft.Samples.SqlServer.Dts
{
[
DtsPipelineComponent
(
DisplayName = "Nii",
Description = "This is the component that says Nii.",
ComponentType = ComponentType.Transform
)
]
public class Nii : PipelineComponent
{
public override void ProcessInput(int inputID, PipelineBuffer buffer)
{
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
try
{
// do something here to
}
catch (Exception e)
{
ComponentMetaData.FireInformation(0, ComponentMetaData.Name, "There was an error on row " + buffer.CurrentRow.ToString() + ". The error is: " + e.Message + " : " + e.Source + " : " + e.StackTrace, "", 0, ref fireEventAgain);
}
}
}
}
}
View 1 Replies
View Related
