This IS Self-join Friday, Isn't It?

Jun 11, 2004

Hi all...I'm still trying to figure out a query related to the topic I posted yesterday about the table scan...got past that...it was smoke and mirrors...

Now...I have a table that looks like (essentially) this:
BegDate (smalldatetime)
EndDate (smalldatetime)
PortfolioID (int)
WklyPerPriceChg (float)

I am trying to come up with a query that returns a table that looks like this:
BegDate, EndDate, WklyPerPriceChg for PortfolioID1, WklyPerPriceChg for PortfolioID2, WklyPerPriceChg for PortfolioID3, WklyPerPriceChg for PortfolioID4

Here is my select:SELECT TOP 100 PERCENT
T.BegDate as StartDate,
T.EndDate as EndDate,
SP.WklyPerPriceChg as Sandp,
WR.WklyPerPriceChg as WeekRvw,
NA.WklyPerPriceChg as NewAm,
T.WklyPerPriceChg as T100
FROMdbo.WeeklyPortfolioIndex T (nolock) INNER JOIN
dbo.WeeklyPortfolioIndex WR (nolock) ON T.BegDate = WR.BegDate INNER JOIN
dbo.WeeklyPortfolioIndex NA (nolock) ON T.BegDate = NA.BegDate INNER JOIN
dbo.WeeklyPortfolioIndex SP (nolock) ON T.BegDate = SP.BegDate
WHERE((T.BegDate >= @FirstBegDate) AND
(T.EndDate <= @LastEndDate)) AND
SP.PortfolioID = 2 AND
WR.PortfolioID = 67 AND
NA.PortfolioID = 11 AND
T.PortfolioID = 90
ORDER BY T.BegDate DESC

I think you can disregard the date stuff that seems to be working.

What I am finding though, is that the self-join only returns rows for dates that have ALL FOUR of the target portfolioID's. What I want is a row for any day that has AT LEAST ONE of the portfolios, and would like NULL or zero returned in the columns for any portfolioID that does NOT have a row present in the table for that date(range).

I thought I would try a FULL OUTER join rather than the inner one (which I would expect to return an output row if ALL portfolio rows were present for that day)...but that returns more of a cartesian product type thang rather than what I am looking for.

I further thought I need something like a GROUP BY T.BegDate, for example, but then it complains that my select columns are not aggregates.

I know this should be fairly easy...I'm just missing the boat by mere inches, I think...

And missing by "mere inches" is still enough to leave me all wet ;)
Thoughts?
Thanks!

View 12 Replies


ADVERTISEMENT

Grouping By Week, Friday 5pm To Friday 5pm

Oct 5, 2007



Hi,

I need to run report that shows activity for Paediatrics Consultants who starts their audit week on Fri 5pm and finish next Fri at 5pm.

Set datefirst would work Fri to Thur but not with hours. And does not always seem to work either.

I need to be able to see historical data and do not want people to enter dates (from to), will group it by wek, consultant

Any clues? Cheers

Petr

View 3 Replies View Related

Last Friday

Sep 20, 2007

Is there an easy way to find out what date was last friday to a given date? For example today is 20 Sep 2007, what would be the expression to find last friday to this date (14 Sep 2007) ?

View 9 Replies View Related

Friday Fun - RunningTotalsAnyone?

Dec 15, 2006

If I put this in crystal reports I can manipulate it ok, but actually translating it to a command isn't so easy for me. I'm terrible at cursors and need some help here, pretty pretty please.

I have a table...

CREATE TABLE [dbo].[StagePayment] (
[PaymentID] [uniqueidentifier] NOT NULL ,
[JobID] [uniqueidentifier] NOT NULL ,
[Paid] [bit] NOT NULL ,
[Sequence] [smallint] NOT NULL ,
[Amount] [decimal](10, 2) NOT NULL ,
[Activity] [varchar] (30) NULL ,
[ActivityID] [uniqueidentifier] NULL ,
[DueDate] [datetime] NULL ,
[InvoiceNumber] [varchar] (50) NULL ,
[DueNext] [bit] NOT NULL
) ON [PRIMARY]
GO

Simple example of the data I need to work with...

PayIDJobIDPaidSequenceAmountDueNext

609412110.000
6B1E 18110.000
297C 25110.000
E175 30114390.000
8CF9 30124390.000
916839114400.000
59F4 39126632.000
BCAF 5411417.500
59225402417.500
8DA0 68112988.000
76C5 68129958.000
0C13 68137566.000
F3F4 68142390.000

What I need to accomplish is flagging the DueNext field if the amount due has not been paid. I cannot rely on the Paid field as it's currently user controlled. I need to compare what's due with the total already paid (stored in another table).

So for instance,
Job #68 - the total amount due would be $22902.00

If the customer has paid $15000.00 then Sequence 3, PayID 0C13, should be flagged as DueNext.

Anyone have a very simple example of a running total cursor that I can reference or a better idea of how to work with this? I appreciate any and all suggestions!
Thanks!
abbra_doo

View 8 Replies View Related

Get Next Friday Of Week

May 22, 2008

I want to make a function which returns the next Friday, given a day in the week. I can't find a solution which works. For example:

Input -> Output
4/22/08 -> 4/23/08
4/23/08 -> 4/23/08
4/24/08 -> 4/30/08

I can't find a solution which works. According to one website, this should do it:
DECLARE @Friday DATETIME
SET @Friday = '20000107'
SELECT DATEADD(day, ((DATEDIFF(day, @Friday, GETDATE()) / 7) * 7), @Friday)

View 3 Replies View Related

Twas The Friday Before Christmas...

Dec 21, 2007

'twas the friday before Christmas,
and all through the company,
everyone appeared to be gone,
except for lil' ol' me.

when I gander at Lotus Notes,
I can see that they are dialed in,
surely asleep on their couch,
but "available over IM".

To be there myself,
is all that I wish.
The highlight of the day
was a lunch of fried fish.

Back to the query analyzer,
dutifully I shall go,
just thought I would post,
to wish you all a merry ho ho...

View 3 Replies View Related

Simple Problem, It's Friday...

Jul 23, 2005

Here is what I need to accomplishiif(len(sMemoText) > 15, left(sMemoText, 15) + '...', sMemoText)How to convert this into a case or anyother way to get this into aselect statement...Thanks MUCH!Jeff

View 3 Replies View Related

DATEDIFF Return Monday - Friday Or Just Weekdays

Aug 30, 2006

I have a query and am trying to just return the difference between two dates but not include weekends.For instance, if I have 08/21/2006 - 08/28/2006, there are 6 weekdays.  I tried this, but I am getting 7 as a result.SELECT DATEDIFF(weekday, request_start_date, request_end_date) AS days_off, request_id
FROM request Any help would be greatly appreciated.

View 2 Replies View Related

SQL Server 2012 :: How To Show Only First Friday Of Every Month

Jul 2, 2015

I am having one requirement where I want to show only first Friday of every month of 2014,2015 and 2016 year.

View 9 Replies View Related

Set Default Parameter Value Monday Through Friday Of Last Week.

Dec 6, 2007



I have a weekly report that i want to display mon tues wed thur and fridays date from last week.

I know how to specifically pick one date:

=DateAdd(DateInterval.Day, -6,DateAdd(DateInterval.Day, 1-Weekday(today),Today))


that would set the parameter to monday. But how to do i make it select all the dates from monday-friday of the previous week?

View 7 Replies View Related

Database Mirroring Webcast On Friday April 28.

Apr 27, 2006

Attendee Registration URL: http://msevents.microsoft.com/CUI/EventDetail.aspx?EventID=1032290575&Culture=en-US

I'll be talking about database mirroring starting @ 9:30 AM Pacific Daylight Time.

Thanks,

Mark

View 1 Replies View Related

Transact SQL :: Convert Output Into Excel And Schedule Automate Job That Runs Every Friday And Send Email With Attachment

Nov 3, 2015

Here below is the perfect query i made which is working fine and giving me the sql output but just only need is how to convert to excel and automate the job scheduling so that it run on everyday and send the mail with attachment .

SELECT DN, cn, displayName, mail, objectClass, sAMAccountName, Company, givenName, sn
FROM
(
SELECT DN, cn, displayName, mail, objectClass, sAMAccountName, Company, givenName, sn, 1 [ordering] FROM alpha.dbo.DCADFeed
where sAMAccountName collate SQL_Latin1_General_CP1_CI_AS in

[Code] ....

View 4 Replies View Related

Can Any One Tell Me The Difference Between Cross Join, Inner Join And Outer Join In Laymans Language

Apr 30, 2008

Hello

Can any one tell me the difference between Cross Join, inner join and outer join in laymans language

by just taking examples of two tables such as Customers and Customer Addresses


Thank You

View 1 Replies View Related

Integration Services :: How To Perform Left Restricted Join In Merge Join Transformation

May 22, 2015

I have two xml source and i need only left restricted data.

how can i perform left restricted join?

View 2 Replies View Related

Transact SQL :: Difference Between Inner Join And Left Outer Join In Multi-table Joins?

Oct 8, 2015

I was writing a query using both left outer join and inner join.  And the query was ....

SELECT
        S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
        Production.Suppliers AS S LEFT OUTER JOIN
        (Production.Products AS P
         INNER JOIN Production.Categories AS C

[code]....

However ,the result that i got was correct.But when i did  the same query using the left outer join in both the cases

i.e..

SELECT
        S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
        Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
LEFT OUTER JOIN Production.Categories AS C
ON C.categoryid = P.categoryid)
ON
S.supplierid = P.supplierid
WHERE
S.country = N'Japan';

The result i got was same,i.e

supplier     country    productid    productname     unitprice    categorynameSupplier QOVFD     Japan     9     Product AOZBW    97.00     Meat/PoultrySupplier QOVFD    Japan   10     Product YHXGE     31.00     SeafoodSupplier QOVFD     Japan   74     Product BKAZJ    10.00     ProduceSupplier QWUSF     Japan    13     Product POXFU     6.00     SeafoodSupplier QWUSF     Japan     14     Product PWCJB     23.25     ProduceSupplier QWUSF    Japan     15    Product KSZOI     15.50    CondimentsSupplier XYZ     Japan     NULL     NULL     NULL     NULLSupplier XYZ     Japan     NULL     NULL     NULL     NULL

and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.

View 5 Replies View Related

Warning - The Join Order Has Been Enforced Because A Local Join Hint Is Used

Dec 23, 2014

I have two select statements, in between select statement taking UNION ALL . I need to avoid the error

Warning: The join order has been enforced because a local join hint is used.

View 9 Replies View Related

'Left Outer Merge Join' Failing To Join Valid Row

Aug 10, 2007

Scenario:

OLEDB source 1
SELECT ...
,[MANUAL DCD ID] <-- this column set to sort order = 1
...
FROM [dbo].[XLSDCI] ORDER BY [MANUAL DCD ID] ASC


OLEDB source 2
SELECT ...
,[Bo Tkt Num] <-- this column set to sort order = 1
...
FROM ....[dbo].[FFFenics] ORDER BY [Bo Tkt Num] ASC

These two tasks are followed immediately by a MERGE JOIN

All columns in source1 are ticked, all column in source2 are ticked, join key is shown above.
join type is left outer join (source 1 -> source 2)

result of source1 (..dcd column)
...
4-400-8000119
4-400-8000120
4-400-8000121
4-400-8000122 <--row not joining
4-400-8000123
4-400-8000124
...


result of source2 (..tkt num column)
...
4-400-1000118
4-400-1000119
4-400-1000120
4-400-1000121
4-400-1000122 <--row not joining
4-400-1000123
4-400-1000124
4-400-1000125
...

All other rows are joining as expected.
Why is it failing for this one row?

View 1 Replies View Related

Multi-table JOIN Query With More Than One JOIN Statement

Apr 14, 2015

I'm having trouble with a multi-table JOIN statement with more than one JOIN statement.

For each order, I need to return the following: CarsID, CarModelName, MakeID, OrderDate, ProductName, Total ordered the Car Category.

The carid (primary key) and carmodelname belong to the Cars table.
The makeid and orderdate belong to the OrderDetails table.
The productname and carcategory belong to the Product table.

The number of rows returned should be the same as the number of rows in OrderDetails.

View 2 Replies View Related

Select Command - Left Join Versus Inner Join

Aug 9, 2013

Why would I use a left join instead of a inner join when the columns entered within the SELECT command determine what is displayed from the query results?

View 4 Replies View Related

Merge Join (Full Outer Join) Never Finishes.

Jun 5, 2006

I have a merge join (full outer join) task in a data flow. The left input comes from a flat file source and then a script transformation which does some custom grouping. The right input comes from an oledb source. The script transformation output is asynchronous (SynchronousInputID=0). The left input has many more rows (200,000+) than the right input (2,500). I run it from VS 2005 by right-click/execute on the data flow task. The merge join remains yellow and the task never finishes. I do see a row count above the flat file destination that reaches a certain number and seems to get stuck there. When I test with a smaller file on the left it works OK. Any suggestions?

View 3 Replies View Related

Why Does My Query Timeout Unless Force Join To Hash Join?

Jul 25, 2007

I'm using SQL Server 2005.



A piece of software I wrote starting timing out on a query that left outer joins a table to a view. Both the table and view have approximately the same number of rows (about 170000).



The table has 2 very similar columns, one is a varchar(1) and another is varchar(100). Neither are included in any index and beyond the size difference, the columns have the same properties. One of the employees here uses the varchar(1) column (called miscsearch) to tag large sets of rows to perform some action on. In this case, he had set 9000 rows miscsearch value to "g". The query then should join the table and view for all rows where miscsearch is set to g in the table. This query takes at least 20 minutes to run (I stopped it at this point).

If I remove the "where" clause and join all rows in the two tables, the query completes in about 20 seconds. If set the varchar(100) column (called descrip) to "g" for the same rows set via miscsearch, the query completes in about 20 seconds.



If I force the join type to a hash join, the query completes using miscsearch in about 30 seconds.



So, this works:

SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER HASH JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE miscsearch = 'g' ORDER BY balance DESC



and this works:

SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE descrip = 'g' ORDER BY balance DESC



But this does't:

SELECT di.File_No, prevPlacements, balance,'NOT PLACED' as status FROM Info di LEFT OUTER JOIN View_PP pp ON di.ram_file_no = pp.file_no WHERE miscsearch = 'g' ORDER BY balance DESC



What should I be looking for here to understand why this is happening?



Thanks,

john















View 1 Replies View Related

Page 2 - Within The INNER JOIN, How To Limit The Row To 1 Row Inside The INNER JOIN?

Apr 24, 2007

Awesome! I don't alway get the email notification of whoever reply to the posting. I think it only work after I log off of the forum.

Scott

View 2 Replies View Related

Changing From Implicit Join To Explicit Join

Dec 24, 2013

We are trying to migrate from sql 2005 to 2012. I am changing one of the implicit join to explicit join. As soon as I change the join, the number of rows returned are fewer than before.

Below is my Implict join query

INSERT #RIF_TEMP1 (rf1_row_no,rf1_rif, rf1_key_id_no, rf1_last_date, rf1_start_date)
SELECT currow.rf0_row_no, currow.rf0_rif, currow.rf0_key_id_no, prevrow.rf0_start_date, currow.rf0_start_date
FROM #RIF_TEMP0 currow , #RIF_TEMP0 prevrow

[Code] ....

and below is explict join query

INSERT #RIF_TEMP1 (rf1_row_no,rf1_rif, rf1_key_id_no, rf1_last_date, rf1_start_date)
SELECT currow.rf0_row_no, currow.rf0_rif, currow.rf0_key_id_no, prevrow.rf0_start_date, currow.rf0_start_date
FROM #RIF_TEMP0 currow LEFT JOIN #RIF_TEMP0 prevrow
ON (currow.rf0_row_no = prevrow.rf0_row_no + 1)

[Code] ....

the count returned from both the queries is different.

I am not sure what am I doing wrong. The count of #RIF_TEMP0 is always 32, it never changes, but the variable @countTemp is different for both the queries.

View 7 Replies View Related

Right Join Returns Same Results As Left Join

Feb 5, 2015

Why does this right join return the same results as using a left (or even a full join)?There are 470 records in Account, and there are 1611 records in Contact. But any join returns 793 records.

select Contact.firstname, Contact.lastname, Account.[Account Name]
from Contact
right join Account
on Contact.[Account Name] = Account.[Account Name]
where Contact.[Account Name] = Account.[Account Name]

View 3 Replies View Related

How To Join 3 Tables Using Left Or Right Join Keyword?

Aug 17, 2007

Hi guys,

I'll appreciate any help with the following problem:

I need to retrieve data from 3 tables. 2 master tables and 1 transaction table.

1. Master table TBLOC contain 2 records :
rcd 1. S01
rcd 2. S02

2. Master table TBCODE contain 5 records:

rcd 1. C1
rcd 2. C2
rcd 3. C3
rcd 4. C4
rcd 5. C5

3. Transaction table TBITEM contain 4 records which link to 2 master table:
rcd 1. S01, C1, CAR

rcd 2. S01, C4, TOY
rcd 3. S01, C5, KEY
rcd 4. S02, C2, CAR



I use Left Join & Right Join to retrieve result below (using non-ASNI method) but it doesn't work.

Right Join method:


SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A RIGHT JOIN TBCODE B ON A.CODE = B.CODE

RIGHT JOIN TBLOC C ON A.LOC = C.LOC

GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE



When I use Non-ASNI method it work:



SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A, TBCODE B, TBLOC C

WHERE A.CODE =* B.CODE AND A.LOC =* C.LOC

GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE

Result:

LOC CODE ITEM
-----------------------------
S01 C1 NULL
S01 C2 NULL
S01 C3 CAR
S01 C4 TOY
S01 C5 KEY
S02 C1 NULL
S02 C2 CAR
S02 C3 NULL
S02 C4 NULL
S02 C5 NULL


Please Help.

Thanks.






View 3 Replies View Related

Super Join - Is Merge Join The Answer?

Nov 7, 2006

Is there a way to do a super-table join ie two table join with no matching criteria? I am pulling in a sheet from XL and joining to a table in SQLServer. The join should read something like €œfor every row in the sheet I need that row and a code from a table. 100 rows in the sheet merged with 10 codes from the table = 1000 result rows.

This is the simple sql (no join on the tables):

select 1.code, 2.rowdetail
from tblcodes 1, tblelements 2

But how to do this in SSIS?

Thanks - Ken

View 2 Replies View Related

How Would You Convert A Hash Join Into A Merge Join?

May 6, 2008

I read that merge joins work a lot faster than hash joins. How would you convert a hash join into a merge join? (Referring to output on Execution Plan diagrams.)
THANKS

View 3 Replies View Related

Within The INNER JOIN, How To Limit The Row To 1 Row Inside The INNER JOIN?

Apr 17, 2007

There is a table called "tblvZipCodes" that contain a zipcode of all cities, area code that are located in that zip code.

The problem I have with the inner join is that there are more than 1 cities in one zipcode code. Is there a way to just return only the 1st row and not return the rest of the rows from the tblvZipCodes in the INNER JOIN query?

Thanks..


Code:

SELECT TOP 100 PERCENT dbo.tblPurchaseRaw.Year, dbo.tblPurchaseRaw.Make, dbo.tblPurchaseRaw.Model, dbo.tblPurchaseRaw.ModelType,
dbo.tblPurchaseRaw.Color, dbo.tblvZipCodes.ZIPCode, dbo.tblvZipCodes.City, dbo.tblvZipCodes.County, dbo.tblvZipCodes.State,
dbo.tblvZipCodes.AreaCode, dbo.tblvZipCodes.Region, dbo.tblaAccounts.Name, dbo.tblaAccounts.PhoneOne, dbo.tblaAccounts.AccountID,
dbo.tblPurchaseRaw.AcceptedID, dbo.tblPurchaseRaw.Series, dbo.tblPurchaseRaw.BodyStyle, dbo.tblaAccounts.WebSite,
dbo.tblaAccounts.SalesEmail, dbo.tblPurchaseRaw.EmailTo, dbo.tblPurchaseRaw.PhotoURL, dbo.tblPurchaseRaw.Mileage,
dbo.tblPurchaseRaw.RawID, dbo.tblvRegions.Name AS RegionName, dbo.tblPurchaseRaw.VIN, dbo.tblPurchaseRaw.Style,
dbo.tblPurchaseRaw.StockDate
FROM dbo.tblPurchaseRaw INNER JOIN
dbo.tblaAccounts ON dbo.tblPurchaseRaw.AccountID = dbo.tblaAccounts.AccountID INNER JOIN
dbo.tblvZipCodes ON dbo.tblPurchaseRaw.ZipCode = dbo.tblvZipCodes.ZIPCode INNER JOIN
dbo.tblvRegions ON dbo.tblvZipCodes.Region = dbo.tblvRegions.RegionID
WHERE (CONVERT(char, dbo.tblPurchaseRaw.StockDate, 101) <> '01/01/1900') AND (dbo.tblPurchaseRaw.SoldRawID IS NULL) AND
(dbo.tblPurchaseRaw.AcceptedID <> - 10) AND (dbo.tblPurchaseRaw.AcceptedID <> - 1)
ORDER BY dbo.tblvZipCodes.ZIPCode

View 14 Replies View Related

Inner Join To Outer Join Problem

Mar 1, 2008

hello, i am running mysql server 5 and i have sql syntax like this:
select
sales.customerid as cid,
name,
count(saleid)
from
sales
inner join
customers
on
customers.customerid=sales.customerid
group by
sales.customerid
order by
sales.customerid;
it works fine and speedy. but when i change inner join to right join, in order to get all customers even there is no sale, my server locks up. note: there is about 10000 customers and 15000 sales.
what can be the problem?
thanks,

View 10 Replies View Related

SQL Query Question - JOIN Or Not To JOIN

Jan 2, 2006

I have 2 tables, I will add sample data to them to help me explain...Table1(Fields: A, B)=====1,One2,Two3,ThreeTable2(Fields: A,B)=====2,deux9,neufI want to create a query that will only return data so long as the key(Field A) is on both tables, if not, return nothing. How can I dothis? I am thnking about using a 'JOIN' but not sure how to implementit...i.e: 2 would return data- but 9 would not...any help would be appreciated.

View 3 Replies View Related

Use ANSI Join Or Old Style Join?

May 20, 2006

Hi,Just curious. Would you use ANSI style table joining or the 'oldfashion' table joining; especially if performance is the main concern?What I meant is illustrated below:ANSI Styleselect * from a join b on a.id = b.idOld Styleselect * from a, b where a.id = b.idI noticed that in some SQL, the ANSI is much faster but sometimes, theold style looks much better.It's ridiculous to try out both styles to see which is better wheneverwe want to write an SQL statement.Please comment.Thanks in advance.

View 1 Replies View Related

Performance Between Standard Join And Inner Join

Jun 28, 2007

Hello, everyoneI have one question about the standard join and inner join, which oneis faster and more reliable? Can you recommend me to use? Please,explain me...ThanksChamnap

View 12 Replies View Related

Self Join Outer Join Question

Oct 10, 2007

Given a table of building components e.g. floors, walls, etc, etc:

create table component_multiplier_table
(

system_code char(4),
system_component_code char(3),
function_code char(4),
component_multiplier dec(7,6)
)

Where function_code is the function of the area e.g. Auditorium, Classrom, etc, etc. And not all components are available for all functions e.g. Carpeting is available for Classrooms but not Power Plants or Warehouses.

I need to self join the above table to itself on system_code and system_component_code and find out which rows are missing from each side.

A query that I've been banging away at with no success is:

SELECT c1.*, c2.*
FROM [dbo].[component_multiplier_table] c1 FULL OUTER JOIN [dbo].[component_multiplier_table] c2
ON (c1.system_component_code = c2.system_component_code) AND (c1.[system_code] = c2.[system_code])
WHERE c1.function_code = '2120' AND c2.[function_code] = '2750' AND (c1.[system_code] IS NULL OR c2.system_code IS NULL);

I added the is null conditions, no joy. I've tried every flavor of outer join w/o success.

Could any T-SQL gurus out there help me figure out how to do this in a set before I start coding

DECLARE crsr CURSOR

Thanks.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved