When I send message from Server1 to Server2,I found the error "This message could not be delivered because it is duplicate" in SQLProfiler on Target, why message can be duplicate ? who can help me?
View 8 RepliesI run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
Hi,
I am using service broker in between two database servers. following is the way i am sending and receiving messages
Send
BEGIN TRAN
BEGIN DIALOG CONVERSATION @handle
FROM SERVICE @SendService
TO SERVICE @ReceiveService
ON CONTRACT @Contract
WITH LIFETIME = @lifetime;
SEND ON CONVERSATION @handle
MESSAGE TYPE @xmlMessageType(@xmlMessage);
COMMIT
Receive
BEGIN TRAN;
RECEIVE TOP(1) @xmlMessage = message_body,
@handle = conversation_handle,
@message_type = message_type_name
FROM TransactionQueue;
----------------------------------------------------------------------------------------------------
-- Check to make sure a message was returned to process. In theory this should never happen.
----------------------------------------------------------------------------------------------------
IF @@rowcount = 1
BEGIN
IF @message_type = 'http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog'
BEGIN
END CONVERSATION @handle;
COMMIT
RETURN 0
END
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
BEGIN
RAISERROR(N'Received error %s from service [Target]', 10, 1)
END CONVERSATION @handle;
COMMIT
RETURN 0
END
SET @sql = 'EXEC '+@message_processor_name+' @xml'
BEGIN TRAN
EXEC sp_executesql @sql, N'@xml XML', @xml=@xmlMessage
COMMIT TRAN
END CONVERSATION @handle;
END
COMMIT
I see Messages are delivered to the target every thing working fine other than following errors which i am seeing in profiler.
1) "This message could not be delivered because the conversation endpoint has already been closed." I see this error on initiator end. Is it like ending conversation on initiator end when i get "EndDialog" send an acknowledgement, which cannot be recieved by target as it has already ended conversation.
2) "An error occurred while receiving data: '64(The specified network name is no longer available.)'." I don't have much idea about the reason for this error. But in profiler i see value for GUID is different for this error and the real message.
Let me know if you need any other information
Hi,
I already had a thread for same problem but didn't recieved any response in last 4-5 months so I created a new thread for this
I am using service broker in between two database servers. following is the way i am sending and receiving messages
Send
BEGIN TRAN
BEGIN DIALOG CONVERSATION @handle
FROM SERVICE @SendService
TO SERVICE @ReceiveService
ON CONTRACT @Contract
WITH LIFETIME = @lifetime;
SEND ON CONVERSATION @handle
MESSAGE TYPE @xmlMessageType(@xmlMessage);
COMMIT
Receive
BEGIN TRAN;
RECEIVE TOP(1) @xmlMessage = message_body,
@handle = conversation_handle,
@message_type = message_type_name
FROM TransactionQueue;
----------------------------------------------------------------------------------------------------
-- Check to make sure a message was returned to process. In theory this should never happen.
----------------------------------------------------------------------------------------------------
IF @@rowcount = 1
BEGIN
IF @message_type = 'http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog'
BEGIN
END CONVERSATION @handle;
COMMIT
RETURN 0
END
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
BEGIN
RAISERROR(N'Received error %s from service [Target]', 10, 1)
END CONVERSATION @handle;
COMMIT
RETURN 0
END
SET @sql = 'EXEC '+@message_processor_name+' @xml'
BEGIN TRAN
EXEC sp_executesql @sql, N'@xml XML', @xml=@xmlMessage
COMMIT TRAN
END CONVERSATION @handle;
END
COMMIT
I see Messages are delivered to the target every thing working fine other than following errors which i am seeing in profiler.
1) "This message could not be delivered because the conversation endpoint has already been closed." I see this error on initiator end. Is it like ending conversation on initiator end when i get "EndDialog" send an acknowledgement, which cannot be recieved by target as it has already ended conversation.
2) "An error occurred while receiving data: '64(The specified network name is no longer available.)'." I don't have much idea about the reason for this error. But in profiler i see value for GUID is different for this error and the real message.
Let me know if you need any other information
My problem is that the 'INSERT INTO' query that sends the records to thetable is dynamically compiled in VBA and and the target table has a twocolumn primary key. I have made a number of attempts at getting 'WHERENOT EXISTS' to cure the problem but so far without success and previouspostings have resulted in advice to create an 'ignore duplicates' index.This solved the problem in asmuch as it allowed the SQL to insert the records that did not alreadyexist but resulted in the message appearing every time the user ran thethe query. Whilst this is not a major problem it is vaguely irritatingand I would like to find a way to stop it happening. I suspect that thesolution may involve using the @@ERROR command but I am not sure of thesyntax.RegardsColin*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedHi All, I have a web form that inserts information into two tables in sql 2005 database on a submit button click. I have a unique key on the tables preventing duplicate information which works fine. The problem I have is that at the minute if a users tries to insert a duplicate row they just get the built in sql error message. Is there a way I can validate the information before if goes into the database and display perhaps a label telling the user of their error or is there a way I can customize the build in sql error message? I've had a search on various forums and sites and can't find any info that would help me. Thanks in advance
Dave
I would like to know what options I have with regards to trapping a duplicate record
before it tries to post to a SQL database. I have set the column to unique in SQL. But
when I try to use ASP and post a duplicate record I get a system error. I would like to
just create a referential error to notify the user that they cannot post a duplicate record
please try again. Any help would be greatly appreciated.
RT
I am duplicating a record from my asp.net page in to the database. When i click on save I am getting the following error message
Violation of PRIMARY KEY constraint 'PK_clientinfo'. Cannot insert duplicate key in object 'clientinfo'. The statement has been terminated.
The above message i am getting since i have tried to duplicate the clientname field of my table which is set as the primary key.
What i want is instead of this message in the browser i need to display an alert saying "the clientname entered already exists" by checking the value from the database.
Here is my code. pls modify it to achieve the said problem
if(Page.IsValid==true) { conn.Open(); SqlCommand cmd = new SqlCommand("insert into clientinfo (client_name, address) values ('"+txtclientname.Text+"', '"+txtaddress.Text+"')", conn); cmd.ExecuteNonQuery(); conn.Close(); BindData(); txtclear(); System.Web.HttpContext.Current.Response.Write("<script>alert('New Record Added!');</script>"); Response.Redirect("Clientinfo.aspx"); }
Hi
I tried to deliver a report using data driven subscriptions option. But It does not process. In report manager, under status bar, it indicates 0 processing of 12 total; 0 errors.
Although there is no error I can not see any reports on the shared folder.
But when I go to Mngt Studio and select the specific report and try to refresh that reports subscription I get the following error.
==================================
invalid node. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.XPathExpression.Load(AstNode ast)
at Microsoft.SqlServer.Management.Smo.XPathExpression.Compile(String strXPathExpression)
at Microsoft.SqlServer.Management.Smo.Urn.get_XPathExpression()
at Microsoft.SqlServer.Management.Smo.Urn.Compare(Urn u1, Urn u2, CompareOptions[] compInfoList, CultureInfo cultureInfo)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.RebuildItem(INavigableItem item, Boolean applyItemParentFilter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequeryProperties()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh(Boolean autoRefresh)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.Refresh()
Does any body know how to fix this ?
Thanks
Hi,
after i try to build the web application "Web Development - Data Entry Form" i get the following error message. I already change the variable username to system which is defined in Machine.Config.
The Error messega is like following:
SQL Server does not exist or access denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
Thanks,
Hello,
I'm hoping someone can help me with this. We use t-sql scripts to install merge replication and we have run into a bit of a problem. Sometimes the subscriber already has a database with data and we don't want to apply the snapshot. I thought that if you call sp_addmergereplication with the @sync_type set to 'none' then for that subscriber it will forgo the initial snapshot. It looks like it is still applying it and I'm getting foreign key constraint errors. This occurs on both 2k and 2k5. What's more we could swear that this used to work...
Anyway, any advice would be greatly appreciated. Thanks for reading!
Scott
Hi All,
I'm delivering some reports through data driven to a shared folder in another computer in my network. In report manager, under status, it shows the following message.
Processing: 10 processed of 12 total; 0 errors.
When I chek in the folder, I can see sometimes only 6 reports. I rescheduled and run it again. Then I could see only 10 out of 12 reports.
I opened the Management Studio and tried to refreshed the report subscription under subscription. Then I got the following error message.
"
nvalid node. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.XPathExpression.Load(AstNode ast)
at Microsoft.SqlServer.Management.Smo.XPathExpression.Compile(String strXPathExpression)
at Microsoft.SqlServer.Management.Smo.Urn.get_XPathExpression()
at Microsoft.SqlServer.Management.Smo.Urn.Compare(Urn u1, Urn u2, CompareOptions[] compInfoList, CultureInfo cultureInfo)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.RebuildItem(INavigableItem item, Boolean applyItemParentFilter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequeryProperties()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh(Boolean autoRefresh)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.Refresh()
Even If see error log file, I can not see any file there. This is actually a file of the previous run.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>Pacific Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__11_05_2007_11_29_11.log</Path>
<SystemName>DEV02</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!configmanager!4!11/5/2007-11:29:12:: w WARN: WebServiceAccount is not specified in the config file. Using default: DEV02ASPNET
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!8!11/5/2007-11:29:20:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: Cannot open database "ReportServer" requested by the login. The login failed.
Login failed for user 'ZOPAratnayake'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.ReportingServices.Library.ConnectionManager.OpenConnection()
--- End of inner exception stack trace ---
ReportingServicesService!library!8!11/5/2007-11:29:21:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: Cannot open database "ReportServer" requested by the login. The login failed.
Login failed for user 'ZOPAratnayake'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
ReportingServicesService!library!4!11/05/2007-11:43:03:: Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!4!11/05/2007-11:43:03:: Notification 77fc9843-80f6-4392-9c26-3a84b087dafb completed. Success: True, Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 0
ReportingServicesService!dbpolling!4!11/05/2007-11:43:03:: NotificationPolling finished processing item 77fc9843-80f6-4392-9c26-3a84b087dafb
ReportingServicesService!library!4!11/5/2007-11:43:03:: i INFO: Initializing SqlStreamingBufferSize to default value of '64640' Bytes because it was not specified in Server system properties.
ReportingServicesService!library!4!11/5/2007-11:43:03:: i INFO: Initializing SnapshotCompression to 'SQL' as specified in Server system properties.
ReportingServicesService!library!d!11/05/2007-11:43:03:: Data Driven Notification for activation id 668b2d9c-d5ea-46e9-8efd-e2824e9a8c64 was saved.
ReportingServicesService!library!d!11/05/2007-11:43:03:: Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!d!11/05/2007-11:43:03:: Notification 5fa50ecb-1b0f-4e40-86c8-4c4700c4b820 completed. Success: True, Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 0
ReportingServicesService!dbpolling!d!11/05/2007-11:43:03:: NotificationPolling finished processing item 5fa50ecb-1b0f-
ReportingServicesService!library!d!11/05/2007-11:43:03:: Data Driven Notification for activation id 668b2d9c-d5ea-46e9-8efd-e2824e9a8c64 was saved.
ReportingServicesService!library!d!11/05/2007-11:43:03:: Status: The file "Members - Awaiting Approval_1.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!d!11/05/2007-11:43:03:: Notification 3a282979-9cab-44fd-b4e8-a083558c494e completed. Success: True, Status: The file "Members - Awaiting Approval_1.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 0
ReportingServicesService!dbpolling!d!11/05/2007-11:43:03:: NotificationPolling finished processing item 3a282979-9cab-44fd-b4e8-a083558c494e
ReportingServicesService!subscription!4!11/05/2007-11:43:03:: System.IO.IOException: The process cannot access the file '\derbyReportsMembers - Awaiting Approval_1.xls' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
ReportingServicesService!subscription!4!11/05/2007-11:43:03:: Error writing file Members - Awaiting Approval_1.xls to path \derbyReports
ReportingServicesService!library!4!11/05/2007-11:43:03:: Data Driven Notification for activation id 668b2d9c-d5ea-46e9-8efd-e2824e9a8c64 was saved.
ReportingServicesService!library!4!11/05/2007-11:43:03:: Status: Failure writing file Members - Awaiting Approval_1.xls : The process cannot access the file '\derbyReportsMembers - Awaiting Approval_1.xls' because it is being used by another process.
ReportingServicesService!dbpolling!4!11/05/2007-11:43:03:: NotificationPolling finished processing item 09e28175-ce44-41cd-ab55-56199a58885f
ReportingServicesService!dbpolling!d!11/5/2007-11:43:03:: NotificationPolling processing item 41cfd72e-bda0-4e8f-87dd-a22789eb340f
ReportingServicesService!dbpolling!c!11/5/2007-11:43:03:: NotificationPolling processing 2 more items. 2 Total items in internal queue.
ReportingServicesService!dbpolling!4!11/5/2007-11:43:03:: NotificationPolling processing item 34e19ce1-b298-48e6-a2fc-b7637765968c
ReportingServicesService!subscription!11!11/05/2007-13:18:10:: Auto increment filename = Members - Awaiting Approval_5.xls
ReportingServicesService!subscription!11!11/05/2007-13:18:10:: System.IO.IOException: The process cannot access the file '\derbyReportsMembers - Awaiting Approval_5.xls' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
ReportingServicesService!subscription!11!11/05/2007-13:26:15:: Auto increment filename = Members - Awaiting Approval_11.xls
ReportingServicesService!library!11!11/05/2007-13:26:15:: Data Driven Notification for activation id 7bd68b9c-855f-4f2a-9482-43ac5f7c9589 was saved.
ReportingServicesService!library!11!11/05/2007-13:26:15:: Status: The file "Members - Awaiting Approval_11.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!11!11/05/2007-13:26:15:: Notification 76aedee6-e860-4c60-aebc-2c3aeb854bed completed. Success: True, Status: The file "Members - Awaiting Approval_11.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 1
ReportingServicesService!dbpolling!11!11/05/2007-13:26:15:: NotificationPolling finished processing item 76aedee6-e860-4c60-aebc-2c3aeb854bed
ReportingServicesService!library!11!11/5/2007-13:29:12:: i INFO: Cleaned 0 batch records, 0 policies, 12 sessions, 0 cache entries, 12 snapshots, 36 chunks, 0 running jobs, 0 persisted streams
Here I did not post the whole error log, because its too long.
Does any one know why I can not deliver all the reports?
Hi all,
[Reporting Services 2005]
I have reports delivered by email subscription. My "date from - to" parameters are set to "default" as "=Today()" and "=Now()". Report is delivered fine but I have problems with "link" to that report (attached to email). RS don't add my default parameter values to this link so every time user click this link, report is generated with new "date from" and "date to" and I want to generate exact the same report (same parameters) as in the email.
Is there a way to send default parameter values as static values in email delivered report link ?
Thanks
Maciej
I am running SQL Server 2005 Reporting Services. I created a subscription delivered by "Report Server File Share" and the UNC path points to a share on a Netware server. I get the following error when the schedule runs:
Failure writing file Completed.pdf : The network path was not found
The UNC path is \rmh5vol1deptimsoperhiscommon.
I can create the same subscription, but have it write to a Windows file share and everything works fine.
Does SQL Server 2005 Reporting Services support writing to a Netware share?
Hello Everyone:
I am using the Import/Export wizard to import data from an ODBC data source. This can only be done from a query to specify the data to transfer.
When I try to create the tables, for the query, I am getting the following error:
Msg 2714, Level 16, State 4, Line 12
There is already an object named 'UserID' in the database.
Msg 1750, Level 16, State 0, Line 12
Could not create constraint. See previous errors.
I have duplicated this error with the following script:
USE [testing]
IF OBJECT_ID ('[testing].[dbo].[users1]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users1]
CREATE TABLE [testing].[dbo].[users1] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
IF OBJECT_ID ('[testing].[dbo].[users2]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users2]
CREATE TABLE [testing].[dbo].[users2] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
IF OBJECT_ID ('[testing].[dbo].[users3]', 'U') IS NOT NULL
DROP TABLE [testing].[dbo].[users3]
CREATE TABLE [testing].[dbo].[users3] (
[UserID] bigint NOT NULL,
[Name] nvarchar(25) NULL,
CONSTRAINT [UserID] PRIMARY KEY (UserID)
)
I have searched the "2714 duplicate error msg," but have found references to duplicate table names, rather than multiple field names or column name duplicate errors, within a database.
I think that the schema is only allowing a single UserID primary key.
How do I fix this?
TIA
In my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
Hello,
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
Message request = new Message("Request", body);
Thanks,
Scott Allison...
I've begun to get the above error from my package. The error message refers to two output columns.
Anyone know how this could happen from within the Visual Studio 2005 UI? I've seen the other posts on this subject, and they all seemed to be creating the packages in code.
Is there any way to see all of the columns in the data flow? Or is there any other way to find out which columns it's referring to?
Thanks!
Hi,
The DTS or jobs failed due to the ignore duplicate key message. How do
I turn this dup key message off or ignore it so that the jobs will succeed?
thanks,
Rachel
How can I compare numerous rows in the same table that have the same fname, lname and access_id but different identity values (and other columns) and then keep only the one row which is the most current based on a date col?
This seems so easy, but today I just can't come up with it. Do I have to use a cursor of some kind?
Troy
Hi guys
How can i get id which are duplicate in a table.
Thanks
Hi guys,
i have the following tables:
Table1:
[PKID] WITH INDEX "IGNORE DUPLICATE KEY"
Table2:
[FKID]
and i have the following SQL statement:
insert into Table1
select distinct FKID
from Table2
where FKID not in (select PKID from Table1)
The above SQL statement is in a DTS package which raises "Duplicate key ignored" error... i can't see how that can happen since i am already checking the key if it already exists. ..
Please help !!!
TNT :s
Hi!
Very grateful for some advice... duplicate key.. but how do I solve it.
By Lookup ?
[OLE DB Destination [1647]] Error: An OLE DB error has occurred. Error code: 0x80040E2F. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E2F Description: "The statement has been terminated.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E2F Description: "Violation of PRIMARY KEY constraint 'PK_Dim_Date'. Cannot insert duplicate key in object 'dbo.Dim_Date'.".
OLE db SQL: SELECT DISTINCT convert (char(8),date,112) as day, cast(datepart(year, date) as varchar(4)) + cast(datepart(week, date) as
varchar(2)) as weeknr, cast(datepart(year, date) as varchar(4)) + Substring(convert(varchar(10), date, 121), 6, 2) as month, YEAR(date) AS year FROM Purchase
I'm currently working on a Game DB, To where i can set Primary Key's and such, otherwise the Emu reads it wrong. The current table i am working on, has duplicate row's of every row. (3600 rows instead of 1800) and the duplicates have the same ID as the original row. How would i go about Deleting the Duplicate rows without harming the original? (Sql 2005)
Regards
Vision
I have a stored procedure that inserts records into a table with a Unique Clustered Index with ignore_Dup_Key ON.
I can run the stored procedure fine, and get the message that duplicate keys were ignored, and I have the unique data that I want.
When I try to execute this in a DTS package, it stops the package execution because an error message was returned.
I have tried setting the fail on errors to OFF, but this has no effect.
I found the bug notification that says this was corrected with service pack 1, and have now updgraded all the way to service pack 4, and still get the issue.
I tried adding the select statement as described as a work-around in the bug, and still can't get it past the DTS.
I have verified the service pack, re-booted, etc.....
I am trying this in MSDE 2000a.
Thoughts or comments? Thanks!
Hello guys! Is it possible to duplicate a primary key?
I would like my database to accept data with the same primary key.
Is it possible?
How do you declare ON DUPLICATE KEY UPDATE?
Please help me. Thanks in advance.
Hello,
I have the following query,
SELECT GroupInfo.GroupID, GroupInfo.GroupName
FROM GroupInfo INNER Join DeviceGroup ON(DeviceGroup.GroupID=Groupinfo.GroupID)
INNER Join Deviceinfo ON (Deviceinfo.SerialNumber=DeviceGroup.SerialNumber )
It's out put is as follow:
Group ID GroupName
0 Abc
1 Beta
0 Abc
0 Abc
0 Abc
1 Beta
2 Alpha
Now, I want to make such query which will give me result as a Group ID and Group Name but not in repeating manner, Like,
Group ID GroupName
0 Abc
1 Beta
2 Alpha
Hope I explained what I need to see in result pane.
Thanks,
Junior
hello everyone, how to prevent putting same value into the column in the sqldatabase? while inserting value into the table from asp.net page dynamically,i dont want user to insert same data again and again. is there anyway i can make check the column in the database to look for the duplication value. if not then only i want to make it insert. thanks. jack.
View 1 Replies View RelatedI want to be able to duplicate a row of data in sql....Does anyone know if there is a sql command that will do that. I have a table with an auto increment primary key and I want to duplicate everything except the key into a new record.
Thanks.
I used the following select statement to get duplicate records on Case_number column
select cases.distinct case_link, cases.case_number
from cases
group by case_link
having case_number > 1
I got the error message that
"'cases.warrant_number' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
AND
cases.case_number' is invalid in the HAVING clause because it is not contained in either an aggregate function or the GROUP BY clause.
Any idea on a better statement to use. THANKS FOR YOUR HELP!
Hi,
I have a table and this is what i did to get the desired result
Select A.col1,count(A.col1)
from Tab1
group by col1
having count(A.Col1) > 1
i tried this - but it didnot worked - it returned col1 as blanks -
Select A.col1,B.Col2,count(A.col1)
from Tab1 A, Tab2 B
where A.col1 = B.col1
group by A.col1 , b.col2
having count(A.Col1) > 1
As I was looking for all the rows that are apperaing more than once.
Now - The problem -
I have to join this table to another table Tab2 to get the other details.
My Tab2 is a table from where I have to pull the Customer DEtails like name,address etc.
How should I write this query?
Any thinuhts?
TIA
When you perform a union between table A and table B which table is the duplicate eliminated from? BOL says they are removed but it does not specify how it chooses which to delete.
View 1 Replies View Related