I'm writing a query and I would like to pull records that show me any tickets that may have been created on a specific account within 72 hours of the first ticket. Each order/ticket is date and time stamped. I have been given a list of order numbers, and the requestor would like to see any orders that were created within 72 hours from the date/time the initial order was closed. I'm having a little difficulty figuring out how I would set that parameter within my query. I was thinking I could use:
I have data coming from a telephony system that keeps track of when anemployee makes a phone call to conduct a survey and which project numberis being billed for the time the employee spends on that phone call in aMS SQL Server 2000 database (which I don't own).The data is being returned to me in a view (see DDL for w_HR_Call_Logbelow). I link to this view in MS access through ODBC to create alinked table. I have my own view in Access that converts the integernumbers for start and end date to Date/Time and inserts some otherinformation i need.This data is eventually going to be compared with data from someelectronic timesheets for purposes of comparing entered hours vs hoursactually spent on the telephone, and the people that will be viewing thedata need the total time on the telephone as wall as that total brokendown by day/evening and weekend. Getting weekend durations is easyenough (see SQL for qryTelephonyData below), but I was wondering ifanyone knew of efficient set-based methods for doing a day/eveningbreakdown of some duration given a start date and end date (with theday/evening boundary being 17:59:59)? My impression is that to do thiscorrectly (i.e., handle employees working in different time zones,adjusting for DST, and figuring out what the boundary is for switchingfrom evening back to day) will require procedural code (probably inVisual Basic or VBA).However, if there are set-based algorithms that can accomplish it inSQL, I'd like to explore those, as well. Can anyone give any pointers?Thanks.--DDL for view in MS SQL 2000 database:CREATE VIEW dbo.w_HR_Call_LogASSELECT TOP 100 PERCENT dbo.TRCUsers.WinsID, dbo.users.username ASInitials, dbo.billing.startdate, dbo.billing.startdate +dbo.billing.duration AS EndDate,dbo.billing.duration, dbo.projects.name ASPrjName, dbo.w_GetCallTrackProject6ID(dbo.projects.descript ion) AS ProjID6,dbo.w_GetCallTrackProject10ID(dbo.projects.descrip tion) AS ProjID10,dbo.billing.interactionidFROM dbo.projects INNER JOINdbo.projectsphone INNER JOINdbo.users INNER JOINdbo.TRCUsers ON dbo.users.userid =dbo.TRCUsers.UserID INNER JOINdbo.billing ON dbo.users.userid =dbo.billing.userid ON dbo.projectsphone.projectid =dbo.billing.projectid ONdbo.projects.projectid = dbo.projectsphone.projectidWHERE (dbo.billing.userid 0)ORDER BY dbo.billing.startdateI don't have acess to the tables, but the fields in the view comethrough as the following data types:WinsID - varchar(10)Initials - varchar(30)startdate - long integer (seconds since 1970-01-01 00:00:00)enddate - long integer (seconds since 1970-01-01 00:00:00)duration - long integer (enddate - startdate)ProjID10 - varchar(15)interactionid - varchar(255) (the identifier for this phone call)MS Access SQL statement for qryTelephonyData (based on the view,w_HR_Call_Log):SELECT dbo_w_HR_Call_Log.WinsID, dbo_w_HR_Call_Log.ProjID10,FORMAT(CDATE(DATEADD('s',startdate-(5*60*60),'01-01-197000:00:00')),"yyyy-mm-dd") AS HoursDate,CDATE(DATEADD('s',startdate-(5*60*60),'01-01-1970 00:00:00')) ASStartDT,CDATE(DATEADD('s',enddate-(5*60*60),'01-01-1970 00:00:00')) AS EndDT,DatePart('w',[StartDT]) AS StartDTDayOfWeek, Duration,IIf(StartDTDayOfWeek=1 Or StartDTDayOfWeek=7,Duration,0) ASWeekendSeconds,FROM dbo_w_HR_Call_LogWHERE WinsID<>'0'
Hi, I am new to ASP and SQL. I have a sql database that has two tables. One is Employee Table and the other is Ticket Table and they are joined on EmployeeID. Employee Table: EmployeeID, FirstName, Lastname, Tickets Table: TicketID, EmployeeID, Status,Priority I need a SQL statement that will list employee with the number of tickets he has open. For Example: John Doe (10) . This list employee John Doe with 10 Tickets that have a status of Open. I have tried count(*) , Max and everything I could find on web but I can not put the two together. I can get the total number of tickets that have a status of Open, I can even do a distinct statement that will show all employee's, however I can not figure out how to retreive both at the same time for each employee. Please help.
I posted a thread in the Getting Started forum about how to make a counter for maximum tickets : http://forums.asp.net/t/1215258.aspx but maybe this is a more appropriate forum for this subject. In a school project, we are making a website for a fictional concert/festival (using Visual Studio 2005, C#). On that site users can register and order tickets. We have access to an SQL-database, by the way, where we can create tables etc. We want the maximum amount of tickets to be 10000 per day. The festival is supposed to last from friday to sunday. What would be the best way to do this programatically? The counter should maybe be in an own database table?
trying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName] Go CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
I want to enable my customers to purchase "tickets" that they can give their group who can then use when registering on my website, using the (prepaid) ticket number instead of paying. This way someone can buy a batch of these tickets and those numbers are reserved and once someone registers using that ticket number / id, then that number is no longer available. These tickets should be just like any other product, being added to a shopping cart etc, but once paid for the ticket # should be generated and should be unique to all other ticket#'s ever created.
ideas ? so far, Ive got the basic shopping cart and other product catalog part working, its just this idea of tickets that Im not sure how best to deal with. Here is a table im starting with
TicketID4int SponsorUserID4int id of user who purchased ticket OrderDate11datetime date ticket was purchased FillDate11datetime date someone registered using this ticket TicketNotes12varchar misc notes TicketCode12varchar random and unique number
The basic idea here is that only once a successful payment has been made, is a Ticket record created. So if someone purchases 100 tickets, then this equates to 100 records.
Here i have small problem in transactions.I don't know how it is happaning. Up to my knowldge if you start a transaction in side the transaction if you have DML statements Those statements only will be effected by rollback or commit but in MS SQL SERVER 7.0 and 6.5 It is rolling back all the commands including DDL witch it shouldn't please let me know on that If any one can help this please tell me ...........Please............ For Example begin transaction t1 create table t1 drop table t2
then execute bellow statements select * from t1 this query gives you table with out data
select * from t2 you will recieve an error that there is no object
but if you rollback T1 willn't be there in the database
droped table t2 will come back please explain how it can happand.....................
We have a few Servers that have space issues that need full DB Backups every day. As a result, we have to carefully watch how many DB Backup files we keep on the Server. On the Maintenance Plan, if I set the 'Delete files older than:' to '1' 'Day', will this delete anything over 24 hours old? What I have noticed, is that it tends to delete on Tuesday anything that was created on Sunday, but not Monday. Therefore, I am assuming that instead of '1 Day' being 24 hours, it is anything less than 47 hours and 59 minutes...
Is my assumption correct or do I need to look at something else. Thanks!
SELECT sysjobs.name, sysjobservers.last_run_outcome, CONVERT(varchar(8), sysjobservers.last_run_date, 112) AS LastRunDate, CONVERT(varchar(8), sysjobservers.last_run_time, 8) AS LastRunTime, GETDATE() AS CurrentDateTime FROM sysjobs LEFT OUTER JOIN sysjobservers ON sysjobs.job_id = sysjobservers.job_id WHERE (sysjobservers.last_run_outcome = 0) AND (CONVERT(varchar(8), sysjobservers.last_run_date, 112) >= DATEADD(day, - 1, GETDATE()))
I am wanting a similar solution, I need to convert an "int" to a time format, when I use this where ">= DATEADD(minute, - 720, GETDATE())" for the last_run_time I get this error:
Syntax error converting datetime from character string.
I have a job that runs between the hours of 10 PM and 9 AM. It launches a controller stored procedure that will call other stored procedure until the entire process is done.I would like the controlling stored procedure to only call the steps between the hours of 10PM and 9AM also.. So at 8:59 AM it will start the next step, but at 9:00 AM it will exit.
I use SQL 2K with an Access 2000 project as front end. I have four date fields in a table. The first one should contain a date (eg 20th of February), the second one a starting hour (eg 8:00h), the third one the finishing hour (eg 10:00h) and the fourth should calculate the difference between the second and third column. So I created four datetime fields. Storing a date in the first column is no problem, but storing only hours doesn't seem to do what I want. When I enter 8:00 from within the Access, it is stored 1/1/1900 8:00 in SQL Server. How can I make sure that the hours are saved with the date of the second column, so either as 8:00 without further information or as eg 20-2-2004 8:00?
I am querying a database that has hours worked listed by pay rate. I want to return sum of hours per pay rates I have been given but hours are stored in multiple columns. So If I run the below query for one worker it returns.
Select Sum(Hours_1) As Hours,Bill_rate_1,Sum(Hours_2) as Hours_2,Bill_rate_2--,Hours_3,Bill_rate_3 From Valid_Timesheets Where (Department = '938' and tax_period = 3 and tax_year = 2015 AND PERSONNEL_REF = '991A001198') and ((Bill_Rate_1 = £10.26 or Bill_Rate_1 = £9.67 or Bill_Rate_1 = £8.27 or
Hi,I have the following query:SELECT p.employee_code, p.employee_name,CONVERT(VARCHAR(12),t.tran_date,101) AS TranDate,CONVERT(VARCHAR(12),t.post_date,101) AS PostDate, SUM(tobill_hrs) ASTotalHoursFROM tat_time t, hbm_persnl pWHERE t.tk_empl_uno = p.empl_uno AND t.tran_date BETWEEN '2005-03-01'AND '2005-03-31' AND p.employee_code IN ('0340')GROUP BY p.employee_code, p.employee_name, t.tran_date, t.post_dateORDER BY p.employee_codeI would like to sum the tobill_hrs by week (Monday-Sunday) instead ofby day. For instance the user will put in a date range (a from dateand to date).Is this possible to do?Thanks!
I am creating a report that has call duration and if i run it over amulti-day span the duration is limited to 24 hours and starts over atzero. is there a way to not limit hours?I am usign the following in my select statement:convert(varchar(12), dateadd(s,SUM(ISNULL(Calls.OutgoingCallDuration,0)), '19900101'), 108) AS[Outgoing Call Duration]
Is there a function in SQL Server 2005 that can add GMT deviation hours to the existing date. I have a data field with the GMT_Deviation_Hours listed in numeric format e.g. -1, 12 etc. I have another date field to whom i wish to deviate the datetime according to the GMT_Deviation hours.
I have to compare 1 hour between two days , example:
I have this datetime value (BitacoraProcesoUsuario.FechaInicioProceso) in 108 format : 23:35:22
and I make this query:
Select TOP 100 * from BitacoraProcesoUsuario INNER JOIN Turno ON convert(varchar,BitacoraProcesoUsuario.FechaInicioProceso,108) > = '24:00:00' AND convert(varchar,BitacoraProcesoUsuario.FechaInicioProceso,108) <= '06:29:00'
and returns nothing........ this because 23:35:22 is gtreater than 06:29:00' value, my question is how can I compare this hours in this format.
I would like to know the best method or the simplest method to do the following. Take a datetime value and subtract a given number of hours. I am taking a UTC time and subtracting a given number or hours in a query. I seem to be getting mixed results.
What is the best data type to use when tracking hours, for example; 2.30 < this is stored in DB (two hours and thirty minutes) 5.15 < this is stored in DB (5 hours and fifteen minutes)
MS SQLJust to confirm, I need to store the number of hours a user has spent doing something, am I correct using the smalldatetime field for the MS SQL database?I will eventually need to be able to calculate totals using SQL Reporting Services so it's important that the hours add up correctly (to 60 minutes, not 100).ASP.NETI'm trying to find the correct sort of formatting to use? Short time stores the time as 9:50AM, which isn't what i'm after.I need to store the hours as in 1 hour, or 01:00:00 (1 hour, 0 minutes, 0 seconds) or just 01:00 for 1 hour. I do need minutes but seconds are not required.I can't find the right formatting for this, would Long time be more suited?
I have a SQL 7.0 backend for a new DB of mine. This is the first time I have developed a SQL backend from scratch, so the problem may be my design. The problem may lie with my Access frontend (I have tried both 97 and 2k), but I am inclined to think not considering the behavior. On only one table (the master table no less), I cannot add records during business hours. I can add records to other tables and edit records on this table though. This troublesome table has a field indexed as unique that is not the PK (don't know if that has any bearing, but it is the only table in this DB that has that property). The adding records problem appears to be network traffic related because sometimes records can be added at lunchtime and definitely after hours. I currently only have 3 connected users. I had these problems with only one connected user, so the DB itself is not being strained by traffic. I often have more traffic on the DB after hours to avoid the problems. I have worked on the connection and network traffic angle for awhile, when I stumbled upon the bizarre part. If I add a record via a stored procedure and run this SP on the SQL query analyzer on the server (no network is involved) it is still slow to add the record (30 minutes or more). Needless to say this would equate to an failure on the front end. The same query will run in 0-3 seconds after hours! Does anyone have any clue how this could happen? I am stumped. I do have a budget for a consultant if I need one, but I need to find someone who has a chance to fix this problem. If you don't know the answer but can refer someone in the DFW area, I am in your debt.
I am trying to calculate business hours that an order that is open. The rules are 8am-5pm. For instance the first row, the clock would stop at 17:00, and pick up again at 8am and add on to total business hours. If the order was created after business hours, and the endstamp was before business hours, this would be 0. If created after 5pm friday, and the endstamp was before 8am monday, this would be 0. In the second set of timestamps I have here the order was recieved at 14:39 but took until the following day at 14:49 to be ordered. I imagine I have to use datepart and datediff for this, but other than that I am not sure on how to do it. Any help would really be appreciated!
hello this is my store procedure and i want to set the hour of the first date to be 00:00:00 and the hour of the second date to be 23:59:59 but i don't know how to do this,so please HELP me
CREATE PROCEDURE dbo.Proba @date1 smalldatetime , @date2 smalldatetime, @s float output AS Select @s=sum(Pay) from RKO where Dates between @date1 AND @date2 GO
I'd like a function that returns the number of hours in a specific month (or the number of days which I could then multiply by 24). The function would have to consider leap years for February.
I previously posted about a problem where I added a non-NULL DEFAULT 0 bit column to a table with 80 million records. It was taking a LONG time and we needed that database up fast. It ended up taking a total of 17 hours.
Now my coworker added the same non-NULL DEFAULT 0 bit column to another table on another important server. But this table has more like 400 million rows. It's been running for 100+ hours and is still going. We were hoping it would scale linearly (5*80 million records would hopefully take 5*17 hours) but that isn't happening. I have no idea how much longer it will take. I really need this to be done. I'm tempted to cancel but that will incur a potentially massive rollback, right? Any guestimate on how large that would be?
