Time Calculation
Mar 26, 2008
i am trying to calculate the time that is spend by user on the internet per site. the file that we receive from the WebProxLog contains the following fields ClientIP, ClientUname,logdate,logTime, ProcessingTime, DestinationHost,DestinationIP. I want to check per user per site how much time the user spend per date. Now my challenge is that if the user connects to the side today and logout and reconnects again to the same side how do i calculate the time spend on the site because the file does not show the logout time
View 3 Replies
ADVERTISEMENT
Sep 17, 2015
I have created calcalated measures in a SQL Server 2012 SSAS multi dimensional model by creating empty measures in the cube and use scope statements to fill the calculation.
(so I can use measure security on calculations
as explained here  )
SCOPE [Measures].[C];
THIS = IIF([B]=0,0,[Measures].[A]/[Measures].[B]);
View 2 Replies
View Related
Aug 23, 2005
I have a problem with date/time:
1. I have data something like this:
start 07.30
end 16.00
How can i count how many hours and minutes from start to end?
2. Another data
start: 20050805 -> August 5, 2005
end: 20050810
How can I return value that when i insert 20050809 it is between start and end, and if 20050811 it will say false that the date is between start and end
thx
View 1 Replies
View Related
Feb 12, 2014
I have two table one with employee time in out. Employee is having two shift
[EMPID][Date] [Time]
818401/01/201410:04
818401/01/201411:48
818401/01/201416:17
818401/01/201422:20
Second table shows Schedule for employee
[EmpID][IN1] [OUT1] [IN2] [OUT2]
818510:00:0020:00:0015:00:0020:00:00
How do i get the detail in this format
EmpID Date In1 out1 In2 out2
8185 01/01/2014 10:04 11:48 16:17 22:20
View 6 Replies
View Related
Aug 30, 2007
Hello All,
I have some difficulties with TSQL where i need to calculate time between two records in seconds.
Records look like this:
ID IP DATE CHANNEL_ID #CALCTIME
1 10.132.184.226 12/06/2007 08:00:00 406 35
2 10.96.121.230 12/06/2007 08:00:10 1 45
3 10.128.242.214 12/06/2007 08:00:20 4 39
4 10.132.184.226 12/06/2007 08:00:30 2
5 10.96.121.230 12/06/2007 08:00:55 3
6 10.96.121.214 12/06/2007 08:00:59 3 21
7 10.96.121.214 12/06/2007 08:01:20 4
.........................................................................................................
Basically i would need to calculate the time between 2 records with the same IP (next one with the same IP) and calculate the time between the DATE which is basically attached to the first record. As you can see the first #CALCTIME is done between the ID #1 and ID#4 which means that the time difference must be done between the current and the next record.
Really appreciate your help!
Thank you!
Sebastijan
View 1 Replies
View Related
Oct 6, 2004
Hi,
I get a no. of seconds (like '33450', varchar) for each day and I have a day field (like '19.10.2004', varchar).
How can I easily convert it into a datetime-field (like 2004-10-19 09:17:50) ?
Does anybody has an idea ?
:confused:
View 5 Replies
View Related
Oct 29, 2014
I am trying to produce a report that will show a duration in minutes of a time when a room was occupied for a category. Whilst I have the start and end dates and times, the end user must be able to specify not only a range of dates, but a start and endtime of hours in the day in which they are interested in (it will be applied to all days in the range - they are not allowed to specify a different start/endtime per day).
The example I have is a date range of 6 to 17 October, but they only want the times from 09:00 to 21:00, so if a room was occupied from 08:00 to 11:00 they would only want to know the duration as 120 minutes (09:00 to 11:00) not 180.
The data is supplied by a third party, and duration in minutes is supplied, but it is not much use when they are not interested in the 'real' duration.
CREATE TABLE [dbo].[Evts](
[Location_name] [nvarchar](200) NULL,
[Event_Category] [nvarchar](500) NULL,
[Start_Time] [datetime] NULL,
[End_Time] [datetime] NULL,
[Duration] [int] NULL
[Code] ....
---but the expected output is
Location_nameEvent_Categoryduration
RS8CM240
RS8OD480 -- eliminating 08:00 - 09:00 on 17th
RS8OOT300 -- eliminating 08:00 - 09:00 on 13th
RS8SCC150
RS8SODT1740
RS8 SODT180
RS8SODTB60
RS8SODTNT180
RS8TR60
Looking for info regarding to the minute calculation when the start time specified by the user differs from that of the actual startime?
View 2 Replies
View Related
Apr 16, 2008
Would like to know if it is possible to calculate the duration of a Datetime Start and End Dates ignoring all overlapps?
Eg:
1) StartTime 10:00:00 EndTime 11:00:00 Duration: 01:00:00
2) StartTime 10:30:00 EndTime 11:15:00 Duration: 00:45:00
Total Duration should be 01:15:00 and not 01:45:00
View 16 Replies
View Related
Mar 6, 2007
Has anyone been able to get time calculations to show up in Report Builder? I'm using the BI Wizard standard calculations for YTD & Period over period growth, but I can't figure out how to use them within Report Builder. They are available in Report Designer, however. I did find the info about assigning the calculations to a measure group. I tried that, but it didn't have any affect.
Any help is appreciated.
View 7 Replies
View Related
Jul 19, 2007
Hi I am having to convert some oracle reports to Reporting Services. Where I am having difficulty is with the
calculations.
Oracle
TO_DATE(TO_CHAR(Visit Date+Visit Time/24/60/60,'DD-Mon-YYYY HH24:MISS'),'DD-Mon-YYYY HH24:MISS')
this is a sfar as I have got with the sql version
SQLSERVER2005
= DateAdd("s",Fields!VISIT_DATE.Value,Fields!VISIT_TIME.Value246060 )
visit_date is date datatype visit_time is number datatype. have removed : from MI(here)SS as was showing as smiley.
using:
VS 2005 BI Tools
SQLServer 2005
View 5 Replies
View Related
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
View 5 Replies
View Related
May 4, 2008
Hi,
My predicament is - where do I do these calculations - in my vb.net code or in an SQL stored procedure?
My manager has handed me a task of converting an excel file she uses in to a web aplication.
While it has been easy to devise what should be the screens and how to capture data, I am struggling over how to code the calculations.
The calculations in excel are pretty simple. These are just sequential calculations (about a 150 calculation for average 500 rows). Mathametical operations include sum, average, max min - regular excel stuff. Some calculations involve vlookup (equvalent to calculation based on value derived from a reference table).
So I am stil wondering - where do I do these calculations - in my vb.net code or in an SQL stored procedure?
Since these calculations are required a produce a result in an online environment, what will be faster?
I tried to do a proof of concept by creating a sample calculation in a .NET class and an in a stored procedure. The choice is still not clear. SQL code execution time was not bad. But SQL code tended to be very messy.VB.net code seemed to be a little slow. But seemed a more organised to look at.
Any views that you can offer will be very helpful.
Thanks in advance.
PMA
View 6 Replies
View Related
Aug 3, 2007
I need to calculate the overall GPA for a student in a particular class.
YEAR SCHOOL STUDENT IDENT GRADE TEACHER CLASS GPA
2007 Snow Canyon High Student1 321649 10 Teacher1 Earth Systems 0.0000
2007 Snow Canyon High Student1 321649 10 Teacher1 Earth Systems 1.6700
2007 Snow Canyon High Student1 321649 10 Teacher1 Earth Systems 3.3300
2007 Snow Canyon High Student1 321649 10 Teacher1 Earth Systems 3.6700
2007 Snow Canyon High Student1 321649 10 Teacher2 Elementary Algebra 0.0000
2007 Snow Canyon High Student1 321649 10 Teacher2 Elementary Algebra 0.6700
2007 Snow Canyon High Student1 321649 10 Teacher2 Elementary Algebra 1.0000
The problem I'm having is that a student may not taken the class for four terms (as in the Elementary Algebra example above). So I can't hard code it to sum the gpa and divide by 4; it needs to be the number of terms the student took the class.
Here's my sql:
select
trnscrpt.schyear as [Year],
school.schname as School,
rtrim(stugrp_active.lastname) + ', ' + rtrim(stugrp_active.firstname) as Student,
trnscrpt.suniq as suniq,
stugrp_active.graden as Grade,
trnscrpt.teachname as Teacher,
trnscrpt.descript as Class,
gpamarks.gpavallvl0 AS GPA
from
dbo.trnscrpt
inner join dbo.stugrp_active on trnscrpt.suniq = stugrp_active.suniq INNER JOIN
school ON stugrp_active.schoolc = school.schoolc INNER JOIN
gpamarks ON trnscrpt.marksetc1 = gpamarks.marksetc AND trnscrpt.markawd1 = gpamarks.mark
where
trnscrpt.graden >= 6 and
trnscrpt.markawd1 not in ('NC','NG','P','W','WA','WF','WI','WP') and
trnscrpt.subjectc in ('LA', 'MA', 'CP', 'CB') and
trnscrpt.schyear = 2007 and
stugrp_active.schoolc = 725
order by
school.schname,
student,
grade,
class
View 3 Replies
View Related
May 28, 2008
Dimensions:
DimPeriod/Year-Quarter-Month
DimProduct/Category-Product
Fact:
FactInventory/PeriodKey-ProductKey-StatusCode
Period = 1
Product = 1
Status Code = InStock
Period = 1
Product = 2
Status Code = InStock
Period = 2
Product = 1
Status Code = OutOfStock
Period = 2
Product = 2
Status Code = InStock
In period = 2, status code change from InStock to OutOfStock: Product 1 (Count=1)
In period = 1, number of products with status code = InStock: product 1 and product 2 (Count=2)
The measure = 1 / 2 or 50%. TIA
View 2 Replies
View Related
Oct 9, 2007
This is a smple data in table1
sector RefDate price
pharm 22 august 2007 100.21
gap 15 august 2007 10.32
pharm 21 august 2007 99.99
pharm 9 oct 2007 100.99
pharm 2 oct 2007 98.34
pharm 8 oct 2007 96.34
...
I would like to have the result as follows:
sector RefDate price priceChangeSinceYesterday priceChangeSinceLastWeek priceChangeSinceLastMonth
pharm 9 oct 2007 100.99 100.99-96.34 100.99-98.34 100.99-lastmonth's price value
select
sector,
RefDate,
price,
priceChangeSinceYesterday??,
priceChangeSinceLastWeek???,
priceChangeSinceLastMonth??
from
table1
thanks
View 3 Replies
View Related
Apr 2, 2008
My aim is to do something like what I have explained below and I was planning on building this logic at the Database level only rather than on the frontend code.
There are certain allocations(transactions) that happen on a periodic basis and I am storing these transactions in the PurchaseTranMaster and PurchaseTranDetail table. These transactions are categorized as 'Main' type and the amount could be allocated for one or many categories in a single transaction. Below is how it will be saved in the 2 table
PurchaseTranMaster
TranID TranDate TranType
1 14-March-2008 Main
2 17-March-2008 Main
3 1 9-March-2008 Main
PurchaseTranDetail
TranID Amount Category Debit_TranId
1 1000 A
1 1000 B
2 2000 B
3 300 A
3 400 C
Now what happens is users of my application can make purchases under all these categories only until the Balance under these categories is > than purchase amount. The Balance is calculated as sum of all transactions. It means that w.r.t the above data the balances for each category is(this is not stored in the database)
A 1300
B 3000
C 400
So lets say a user does make a purchase(Trantype is 'SUB') of 300 under A and 400 under B in a single transaction. The data would then be stored in the tables as
PurchaseTranMaster
TranID TranDate TranType
1 14-March-2008 Main
2 17-March-2008 Main
3 19-March-2008 Main
4 20-March-2008 SUB
PurchaseTranDetail
TranID Amount Category Debit_TranId
1 1000 A
1 1000 B
2 2000 B
3 300 A
3 400 C
4 300 A 1
4 400 B 1
In the PurchaseTranDetail the Debit_TranId value means that the amount has been marked against the TranID 1. This TranId is not handpicked by the user and the system should allocate it accordingly based on the amount available for a particualar category for a Main Transaction. It means that before TranId 4 was saved in the database then the system would first check whether the Total available balance for A >=300 and B>=400 (in our example above it is 1300 and 3000 resp)
Then if the Balance is > than the puchase amount then the allocation would be done by the system and this would be done against the TranID whose TranDate was the earliest, so thats why the Debit_TranId column has 1 as TranId 1 was the earliest.so logically now the balance for the categories would be (this is not saved in the database)
A 1000
B 2600
C 400
So next time again when a user would make a purchase(transaction) under A for 800 and under B for 1000 then if the balance is greater than the purchase amount(which in this case it is) the allocation would happen according to the earliest TranId and this time amount would be partly marked against TranId 1 , TranID 2 and TranID 3. The data would look like this
PurchaseTranMaster
TranID TranDate TranType
1 14-March-2008 Main
2 17-March-2008 Main
3 19-March-2008 Main
4 20-March-2008 SUB
5 21-March-2008 SUB
TranID Amount Category Debit_TranId
1 1000 A
1 1000 B
2 2000 B
3 300 A
3 400 C
4 300 A 1
4 400 B 1
5 700 A 1
5 100 A 3
5 600 B 1
5 400 B 2
I need to do the above taking into consideration that there could be multiple users making purchases(concurrency).
Also I was building my logic on doing the above whether to use cursors or loops. I just need to know how do I write my stored procedure and what would be the most efficeint way of doing the above.
The design for creating the above sample tables is below
/*CREATE TABLE PurchaseTranMaster
(
TranID int IDENTITY(1,1) PRIMARY KEY CLUSTERED,
TranDate Datetime,
TranType varchar(30)
)
CREATE TABLE PurchaseTranDetail
(
TranID int,
Amount int,
Category Varchar(20),
Debit_TranId int
)
insert into PurchaseTranMaster values(convert(datetime,' 14-March-2008',103),'Main')
insert into PurchaseTranMaster values(convert(datetime,' 17-March-2008',103),'Main')
insert into PurchaseTranMaster values(convert(datetime,' 19-March-2008',103),'Main')
insert into PurchaseTranMaster values(convert(datetime,' 20-March-2008',103),'SUB')
insert into PurchaseTranMaster values(convert(datetime,' 21-March-2008',103),'SUB')
insert into PurchaseTranDetail values(1,1000,'A',0)
insert into PurchaseTranDetail values(1,1000,'B',0)
insert into PurchaseTranDetail values(2,2000,'B',0)
insert into PurchaseTranDetail values(3,300,'A',0)
insert into PurchaseTranDetail values(3,400,'C',0)
insert into PurchaseTranDetail values(4,300,'A',1)
insert into PurchaseTranDetail values(4,400,'B',1)
insert into PurchaseTranDetail values(5,700,'A',1)
insert into PurchaseTranDetail values(5,100,'A',3)
insert into PurchaseTranDetail values(5,600,'B',1)
insert into PurchaseTranDetail values(5,400,'B',2)*/
View 5 Replies
View Related
Feb 19, 2008
I´m working on SSRS 2005 trying to calculate YTD for the total sale. This is what I got so far:
Code Snippet
WITH MEMBER [Measures].[YTD Amount] AS
'SUM(PeriodsToDate([DATE].[Year]),[Amount])'
SELECT
{[Measures].[Amount],[Measures].[YTD Amount]} ON COLUMNS,
[DATE].[Month].Members ON ROWS
FROM [SKY]
My Date hierarcy is:
Year
Month
When running this query all I get is very small number for Amount column, almost zero for all months and the YTD Amount Column is only showing (null).
View 11 Replies
View Related
Mar 1, 2007
Hello Friends
I have 3 tables
1) Product Id, ShortName
2) IncomingStockId, ProductId, Quantity, InDate
3) OutGoingStock Id, OutDate, ProductId, Quantity
I need to get the results like thisProduct name, quantity in stock today
the "quantity in stock today" = sum (quantity recieved) -sum (quantity sent)
Thank you for your timeSara
View 1 Replies
View Related
Mar 3, 2008
Hi.
i have the code :
cmd = New SqlCommand("SELECT sales,country,year FROM salesTable WHERE (country = " & (CountryBlk) & " AND branch = " & (NameSnif) & " AND datepart(yyyy,year)=" & (YearBlk) & ") order by datepart(mm,year) ", cnn) cnn.Open() rdr = cmd.ExecuteReader( _ CommandBehavior.CloseConnection)
While x < 12 If rdr.Read = Nothing Then Exit While End If varcount(x) = rdr("sales")
TempMonth = rdr("year") MonthNumber(x)=datepart(DateInterval.Month,TempMonth) x = x + 1 End While
i want to calculate and put into the varcount(x) value all sales of the same month
thanks
View 6 Replies
View Related
Oct 12, 2004
I need to create a user defined function to calculation the difference between today and a future date. The result needs to be in days, hours, and minutes formatted as per the following example: 1d / 4h / 30m. I have a moderate level of SQL exprience. however, I would appreciate some expert advice as the best way to approach this.
View 4 Replies
View Related
Mar 14, 2001
hello everyone,
I have a problem of calculating a date, for example, how do i find out the begining date of the week and ending date of the week for certain date,
and how do i find out the beginning date of the month and end date of the month for a certain date,
thanks
View 1 Replies
View Related
Nov 12, 1999
Hi All!
I need a query to find all dates from today to one-year back.
If I start from today day I need find all dates until 11/12/98.
Thanks a lot.
Greg.
View 1 Replies
View Related
Aug 18, 2003
I have scenerio that find out the Bandwitdh size between clint and server.
I wanted find out howmuch size of data recieveing from server at a time.
Any advice regarding this.
Thanks,
Ravi
View 3 Replies
View Related
Oct 7, 2003
HI,
I have the below logic for age calcuation for more than a year.
But I need age calculation for lessthan year.
Note for MAK: As per our previous post that day calucations didn't work.
DECLARE @birthday datetime, @d datetime
SELECT @birthday = '12/31/1998', @d = '12/30/1999'
SELECT datediff(yy, @birthday, @d) -
(case WHEN (datepart(m, @birthday) > datepart(m, @d)) OR
(datepart(m, @birthday) = datepart(m, @d) AND
datepart(d, @birthday) > datepart(d, @d))
THEN 1
ELSE 0
end) AS Age1
View 6 Replies
View Related
Jan 10, 2006
I need to use the first day of previous month, can anybody help me with that please?
Thanks in advance!!
View 6 Replies
View Related
Oct 5, 2004
HI,
getdate() gives me today's date. I have a sql query which returns me a date. I want to see if the difference between today's date and the date returned by sql query is 12 months(1 year) or less. If yes I want to print it.
(If the difference is more than 12 months or 1 year i don't want to consider that record.)
Example:
how to do calculate:
10/05/2004-10/3/2003
View 3 Replies
View Related
Sep 27, 2006
how do i calculate something like this if I have the table with names and count?
Name Count Percent
Name1 27 4.69%
Name2 2 0.35%
....
Totals 576 100.00%
View 3 Replies
View Related
Dec 9, 2004
:eek:
I am performing a calculation in both SQL and MSACCESS. ACCESS is correct and SQL is not. It is off by -.05 Here is the calculation:
Sum((ch.FaceAmount)-(((ch.FaceAmount*Ex.CAN_Exchange_Rate+0.005)*100)/100)) AS TransAmount,
Both FaceAmount and CAN_Exchange_Rate are defined as money in a SQL table. The ACCESS front-end attaches this table, so it uses the same columns in the calculation.
Now, I know SQL looks at money with 4 decimal places. The attached SQL tables in ACCESS looks at these columns as currency which I believe is 2 decimal places. I think this is where the descrepency is. But it still doesn't explain why SQL is calculating the incorrect total.
Does anyone have any ideas?
Gail
View 3 Replies
View Related
Oct 11, 2005
Hi All,
I have around 1000 employee records containing employee number and their salary. How do i calculate percentile on these records?
For example
How to calculate 25th Percentile on Salary of these 1000 records?
Hope I am clear with my question.
Thanks in advance.
Regards,
qA
View 7 Replies
View Related
Apr 21, 2004
In the following calculation I am receiving my output as 000000.9000. I need it to look like 00000000.90. I cant seem to loose the 2 zeros at the end. Can anyone help me with this? Keep in mind that my output has to be varchar.
right('00000000000' + cast((st.rate_dlr * .01) * 10 as varchar),11)
View 3 Replies
View Related
May 20, 2008
I want all dates from DATEADD(DAY,-90,GETDATE()).
1/1/2008
1/2/2008
1/3/2008 .....
and so on. This is probably easy, but I can't figure it out. Any help would be appreciated. Thanks.
View 11 Replies
View Related
Nov 14, 2007
Hi: I am having a problem with the Syntax. I am trying to get the daily value for a contract_nbr. The selection below shows that I am selecting by Case statement when day = 2 (2nd Day) and the month is a parameter provider by the user. For this particular example, I am using 2 (February).
Thanks for the help !!!!
[code]
Set @Req_Month = '2'
SELECT Distinct a.contract_nbr,
Case when Day(c.Beg_eff_date) = 2 and month(c.Beg_eff_date)= @Req_Month
Then c.rcpt_nom_vol-c.rcpt_fuel-rcpt_act_vol
Else 0
End As Day_2
from TIES_Gathering.dbo.contract a
Inner Join TIES_Gathering.dbo.NOm b on a.contract_nbr = b.contract_nbr
Inner Join TIES_Gathering.dbo.Nom_vol_detail c on c.Nom_id = b.Nom_id
where (a.contract_sub_type = 'INT') and (a.Contract_type_code ='GTH')
and (DATEADD(mm, DATEDIFF(mm,0,getdate()), 0) < a.current_expirtn_date)
and (c.rcpt_dlvry_ind ='R')
Group by a.contract_nbr
[code]
View 6 Replies
View Related
Mar 19, 2008
Hi
I am using below code in sql procedure and the data types are below.
b.price -nvarchar 255
b.quantity - nvarchar 255
a.NumPacks - numeric
cast(b.price as decimal(19,2)) / cast(a.NumPacks * b.quantity as decimal(19,2)) AS UNITPRICE
When I run the above code I should get the result as below
1400.99
Instead I am getting as below
1400.990000000000000000
Please help. Advance Thanks.
View 5 Replies
View Related
