Time Event
Oct 6, 2006i heard somewhere that there is a time a "time event wizard" or something like that in SQL.
and i like to know were can i find it. any link or answer will be really appreciated
thanks.
ADVERTISEMENT
How To Use Server Time As An Event
Jul 20, 2005Hi, I want to do some data transfer from a network share and also runsome stored procedures.How can I get them to run at a designated time, automatically?
View 1 Replies View RelatedCalculating The Time Duration For Each Event
Jun 6, 2008Hi all,
Thanks for setting up such a great site and forum.
Here is my problem:
I have a table like the following in SQL Server 2005:
order | taskid | main_person | temp_person | start_assign_date
1 | 3 | John | John | 2008-01-01 10:20:22
2 | 3 | John | Joe | 2008-02-05 15:20:22
3 | 3 | John | John | 2008-02-07 20:25:20
4 | 6 | Joe | Joe | 2008-01-01 10:20:22
5 | 6 | Joe | Mike | 2008-02-01 10:20:22
6 | 10 | Doug | Doug | 2008-01-01 10:20:22
7 | 7 | Russ | Russ | 2008-02-01 11:20:22
8 | 7 | Russ | Mike | 2008-02-08 12:20:22
9 | 7 | Russ | John | 2008-02-10 20:05:12
It was made to record who was in charge of a specific task at a specific time. Each task has its own main responsible person and some substitutes for that person as Temporary Persons (who did the task while main person was away). The Main Person's name is in the temp_person column when he is doing the task by himself.
I'd like to generate a report that shows:
- in a specific time period
- which persons were in charge of a specific task and
- for how long
Something like this:
From 2008-##-## to 2008-##-##
Task 3 - John - 15 days
Task 3 - Joe - 5 days
Task 6 - Joe - 18 days
Task 6 - Mike - 2 days
Task 10 - Doug - 20 days
I have some ideas to do that when there are both start and end dates for every record but I couldn't find a way to use the next assignment start date for each task, as the end date for its previous record (in that task group) to calculate the duration for that record.
I can group the tasks and users and put them in the chronological order but I can't indicate the next start date as the end date for the previous record (in specific task group) to use the date difference functions.
Any hint or comment would be appreciated.
Thanks
Sami
Trigger Event After Time Period
Jul 23, 2005Can anyone offer any advice. I was wondering whether MS SQL server offeredany facilities to trigger an event after a period of time had lapsed? e.g.once a week check data and if it is out of date email an related address.many thanks
View 1 Replies View RelatedTransact SQL :: Accumulate Alarm Time Per Event In A Log Table?
Apr 28, 2015I have a log table in which alarm events are logged (a many relation to a main table) where EventId is the foreign key in the log table.
In this table all events related to a given incident (EventID) are logged, but it is specifically two eventtypes which is of interest, thats the "into alarm" represented by an integer value "0" in the column "EventTypeId" and the "restored represented by an integer value of "2". Each state of change has a timestamp of datetime.For each incident (EventId) there can be multiple "into alarm" and "restore" rows, there can also be other events which has no interests. Only the timediff between each "0" and "2" accumulated is of interest.
There's one more little twitch, it can occure that when the query is run, the "2" restored state is not yet present, the query should not return a result for that "0" into alarm when the "2" restored is not present, unless there was a complete alarm/restore session.
CREATE TABLE [dbo].[AlarmHistoryLog](
[EventId] [int] NOT NULL,
[EventSeq] [int] IDENTITY(1,1) NOT NULL,
[EventTypeId] [int] NOT NULL,
[EventTime] [datetime] NOT NULL,
[EventDescription] [nvarchar](250) NOT NULL,
[Comment] [nvarchar](4000) NULL,
[UserID] [int] NULL,
[ReceiverID] [int] NULL
) ON [PRIMARY]
Transact SQL :: Compare Event Time Value With Current Year And Month
Aug 27, 2015I have the following code block
CREATE TABLE #tbl_1 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_1 VALUES ('2015-08-27 13:47:24.123','150','abc')
INSERT INTO #tbl_1 VALUES ('2015-09-27 13:47:24.123','149','acb')
INSERT INTO #tbl_1 VALUES ('2015-10-27 13:47:24.123','148','cba')
CREATE TABLE #tbl_2 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_2
SELECT * FROM #tbl_1 where ? SELECT * FROM #tbl_2
My requirement is to insert values into #tbl2 that are in current month which are event_time values '2015-08-27'
Recovery :: Configure Extended Event To Trigger A Mail Whenever Any Event Occurs
Jun 2, 2015Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
DB Engine :: Event Tracing For Windows Failed To Send Event
Oct 25, 2011My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date  10/25/2011 10:55:46 AM
Log  SQL Server (Current - 10/25/2011 10:55:00 AM)
Source  spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Â
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
WMI Event Watcher Task Continual Firing Event When Not Triggered
Apr 8, 2008I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
Help - Security Event Log Posts Error Event ID 560 Every Few Seconds
May 31, 2007Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
Query Or Script To Get The Event Viewer Event Properties?
Nov 2, 2007
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
EVENT ID 18456 STATE: 16 Login Failed For User 'DOMAIN/user'. [CLIENT: &&<local Machine&&>] Every Minute In Event Log.
Oct 22, 2007We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
How To Convert UTC Time (retrieved From SQL) To Local Time In Reporting Services Based On Time Zone
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
SQL 2012 :: Accurate Sorting Data Each Time With Millions Of Records Without Time Field?
Apr 25, 2014Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
SQL Server 2014 :: Gathering Stored Procedure Execution Time In Real Time?
Jun 11, 2015Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies View RelatedIntegration Services :: Exclude Time In Date Time Variable In SSIS For Loop?
Oct 22, 2015I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?Â
Transact SQL :: Update Time Portion Of DateTime Field With Time Parameter
Oct 3, 2015I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
It Takes A Long Time To Insert The First Record Each Time When The Program Start
Dec 15, 2006I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
Transact SQL :: Converting 24hrs Time To 12 Hours Time Query Format?
Apr 21, 2015SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
Problem With Getdate() In Transaction Takes The Insert Time Instead Of The Commit Time
Nov 12, 2007Hi,
We need to select rows from the database that have been recently inserted/updated. We have a main primary table (COMMIT_TEST) and a second update table (COMMIT_TEST_UPDATE). The update table contains the primary key and a LAST_UPDATE field which is a datetime (to tell us when an update occurred). Triggers on the primary table are used to populate the update table.
If we insert or update the primary table in a transaction, we would expect that the datetime of the insert/update would be at the commit, however it seems that the insert/update statement is cached and getdate() is executed at the time of the cache instead of the commit. This causes problems as we select rows based on LAST_UPDATE and a commit may occur later but the earlier insert timestamp is saved to the database and we miss that update.
We would like to know if there is anyway to tell the SQL Server to not execute the function getdate() until the commit, or any other way to get the commit to create the correct timestamp.
We are using default isolation level. We have tried using getdate(), current_timestamp and even {fn Now()} with the same results. SQL Queries that reproduce the problem are provided below:
/* Different functions to get current timestamp €“ all have been tested to produce the same results */
/*
SELECT GETDATE()
GO
SELECT CURRENT_TIMESTAMP
GO
SELECT {fn Now()}
GO
*/
/* Use these statements to delete the tables to allow recreate of the tables */
/*
DROP TABLE COMMIT_TEST
DROP TABLE COMMIT_TEST_UPDATE
*/
/* Create a primary table and an UPDATE table to store the date/time when the primary table is modified */
CREATE TABLE dbo.COMMIT_TEST (PKEY int PRIMARY KEY, timestamp) /* ROW_VERSION rowversion */
GO
CREATE TABLE dbo.COMMIT_TEST_UPDATE (PKEY int PRIMARY KEY, LAST_UPDATE datetime, timestamp ) /* ROW_VERSION rowversion */
GO
/* Use these statements to delete the triggers to allow reinsert */
/*
drop trigger LOG_COMMIT_TEST_INSERT
drop trigger LOG_COMMIT_TEST_UPDATE
drop trigger LOG_COMMIT_TEST_DELETE
*/
/* Create insert, update and delete triggers */
create trigger LOG_COMMIT_TEST_INSERT on COMMIT_TEST for INSERT as
begin
declare @time datetime
select @time = getdate()
insert into COMMIT_TEST_UPDATE (PKEY,LAST_UPDATE)
select PKEY, getdate()
from inserted
end
GO
create trigger LOG_COMMIT_TEST_UPDATE on COMMIT_TEST for UPDATE as
begin
declare @time datetime
select @time = getdate()
update COMMIT_TEST_UPDATE
set LAST_UPDATE = getdate()
from COMMIT_TEST_UPDATE, deleted, inserted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
GO
/* In our application deletes should never occur so we don€™t log when they get modified we just delete them from the UPDATE table */
create trigger LOG_COMMIT_TEST_DELETE on COMMIT_TEST for DELETE as
begin
if ( select count(*) from deleted ) > 0
begin
delete COMMIT_TEST_UPDATE
from COMMIT_TEST_UPDATE, deleted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
end
GO
/* Delete any previous inserted record to avoid errors when inserting */
DELETE COMMIT_TEST WHERE PKEY = 1
GO
/* What is the current date/time */
SELECT GETDATE()
GO
BEGIN TRANSACTION
GO
/* Insert a record into the primary table */
INSERT COMMIT_TEST (PKEY) VALUES (1)
GO
/* Simulate additional processing within this transaction */
WAITFOR DELAY '00:00:10'
GO
/* We expect at this point that the date is written to the database (or at least we need some way for this to happen) */
COMMIT TRANSACTION
GO
/* get the current date to show us what date/time should have been committed to the database */
SELECT GETDATE()
GO
/* Select results from the table €“ we see that the timestamp is 10 seconds older than the commit, in other words it was evaluated at */
/* the insert statement, even though the row could not be read with a SELECT as it was uncommitted */
SELECT * FROM COMMIT_TEST
GO
SELECT * FROM COMMIT_TEST_UPDATE
Any help would be appreciated, we understand we could make changes to the application/database to approximate what we need, but all the solutions have identified suffer from possible performance issues, or could still lead to missing deals (assuming the commit time is larger than some artifical time window).
Regards,
Mark
DB Engine :: Time Testing Azure Point In Time Database Restores?
Sep 21, 2015I need to do a time test for restoring an Azure SQL database from a point in time. Can I automate this through PowerShell.
View 3 Replies View RelatedSQL 2012 :: Converting Time String In Temp Table To Military Time Then Cast As Integer?
Dec 26, 2014I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
SQL Server 2008 :: Displaying Transaction Time Punch Data In A Time Card Form?
Oct 7, 2015I have a table called employee_punch_record that we use to store employee time clock punches.
The columns are:
employeeid,
punch_timestamp,
punch_type (In / Out),
closed (bit used as status for open or closed pay periods),
ident
Here are some examples of a record:
bkingery62015-10-06 16:59:04.000In0
bkingery72015-10-06 16:59:09.000Out0
bkingery82015-10-06 16:59:13.000In0
bkingery92015-10-06 18:22:44.000Out0
bkingery102015-10-06 18:22:46.000In0
bkingery112015-10-06 18:22:48.000Out0
bkingery122015-10-06 18:22:51.000In0
tfeller52015-10-05 17:00:05.000In0
We are using SQL Server 2008 as our database and use Access as a GUI. I am looking to create a form in Access where employees can access their time card and request changes from management. I want to use the format from the attached screen shot for the form. I pretty much know how to do it all, the only point of complication is trying to figure out the easiest way to get the transaction punch record data on employee_punch_record into a format where I can easily populate the form in the horizontal format you see in the screen shot.
I am not super strong in SQL, but figure I can do it using a formatting table of some sort. quick and easy way to move transaction records into a more horizontally oriented record?
A Time Series Prediction Was Requested With A Start Time Further In The Past Than The Internal Models Of The Mining Model
Feb 19, 2008Hi all,
I have a very simple time series model which processing works fine without any problem. However when I run the following query
SELECT
[TimeSeries].[PriceChange],
[TimeSeries].[Symbol],
PredictTimeSeries(PriceChange, -3, 2)
From
[TimeSeries]
WHERE
[TimeSeries].[Symbol] = 'x'
I get the following error:
TITLE: Microsoft SQL Server 2005 Analysis Services
------------------------------
Error (Data mining): A time series prediction was requested with a start time further in the past than the internal models of the mining model, TimeSeries, specified in the HISTORIC_MODEL_GAP and HISTORIC_MODEL_COUNT parameters can process.
The following is the excerpt of the minding model script related to the two parameters:
<AlgorithmParameters>
<AlgorithmParameter>
<Name>MISSING_VALUE_SUBSTITUTION</Name>
<Value xsi:type="xsdtring">Previous</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_GAP</Name>
<Value xsi:type="xsd:int">1</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_COUNT</Name>
<Value xsi:type="xsd:int">10</Value>
</AlgorithmParameter>
</AlgorithmParameters>
These HISTORIC_MODEL_GAP (1) and HISTORIC_MODEL_COUNT (10) should accommodate PredictTimeSeries(PriceChange, -3, 2). Could anyone shed some light on this?
Reporting Services :: SSRS Loses Ability To Delegate User Credentials To Database Time To Time?
Apr 30, 2015we have problems with our SQL Reporting Service 2012 (SSRS) server . We have setup Kerberos delegation between SSRS and the database server (SQL Server Always-on cluster) so users are authenticated down to the database. The issue occurs from time to time that SSRS loses the ability to delegate the user credentials to the database. At this point in time the Report Server logs contain rejected database connections because of ANONYMOUS logon. After restarting SSRS the problem is gone.
View 2 Replies View RelatedHelp Writing Query (find The Entry With The Closest Time Given A Time)
May 26, 2005Hi,
I have a table which has a few fields, one being "datetime_traded". I need to write a query which returns the row which has the closest time (down to second) given a date/time. I'm using MS SQL.
Here's what I have so far:
Code:
select * from TICK_D
where datetime_traded = (select min( abs(datediff(second,datetime_traded , Convert(datetime,'2005-05-30:09:31:09')) ) ) from TICK_D)
But I get an error - "The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.".
Does anyone know how i could do this? Thanks a lot for any help!
Optimization Advice (CPU Time = 15203 Ms, Elapsed Time = 8114 Ms.)!!
Aug 17, 2007Ok, so I have some horribly convuluted SQL that I would love to optomize. I'm not happy leaving it in it's current state, that's for sure!
I'm currently working on our test bed servers, so obviously my stats are out because of the "crap-ness" (yes, that's the technical term) of the hardware, but still, it should NEVER need to take this long!!
Basically, the issue arises in the nasty join to the career table (one employee can have multiple career lines). Just to make things complicated, employees can have any number of career records on any given date, these can even be input for future career events. The following SQL picks out the latest-current career date for each employee based on the career_date being <= GetDate() and the date of entry for this date being the greatest.
E.g.
career_date | datetime_created
2009-01-01 | 2006-05-05 13:55:21.000
2007-01-01 | 2006-05-05 13:54:18.000
2007-01-01 | 2006-05-05 13:52:55.000
From the above we want to return
2007-01-01 | 2006-05-05 13:54:18.000
SET STATISTICS IO ON
SET STATISTICS TIME ON
SELECT a.sAMAccountNameAs 'sAMAccountName'
, a.userPrincipalNameAs 'userPrincipalName'
, 'TRUE'As 'Modify'
, RTRIM(e.unique_identifier)As 'employeeID'
, RTRIM(e.employee_number)As 'employeeNumber'
, RTRIM(e.known_as)
+ CASE WHEN RTRIM(e.surname) IS NOT NULL THEN
' ' + RTRIM(e.surname) ELSE NULL ENDAs 'displayName'
, RTRIM(e.known_as)As 'givenName'
, RTRIM(e.surname)As 'sn'
, RTRIM(c.job_title)As 'title'
, RTRIM(c.division)As 'company'
, RTRIM(c.department)As 'department'
, RTRIM(l.description)As 'physicalDeliveryOfficeName'
, RTRIM(REPLACE(am.dn,'\',''))As 'manager'
, t.full_mobile
+ CASE WHEN RTRIM(t.mobile_number) IS NOT NULL THEN
' (DD: ' + RTRIM(t.mobile_number) + ')'ELSE NULL END
As 'mobile'
, t.mobile_numberAs 'otherMobile'
, ad.address_ad_countryAs 'c'
, ad.address_ad_address1
+ CASE WHEN ad.address_ad_address2 IS NOT NULL THEN
', ' + ad.address_ad_address2 ELSE NULL END
+ CASE WHEN ad.address_ad_address3 IS NOT NULL THEN
', ' + ad.address_ad_address3 ELSE NULL END
+ CASE WHEN ad.address_ad_address4 IS NOT NULL THEN
', ' + ad.address_ad_address4 ELSE NULL END
+ CASE WHEN ad.address_ad_address5 IS NOT NULL THEN
', ' + ad.address_ad_address5 ELSE NULL ENDAs 'streetAddress'
, ad.address_ad_poboxAs 'postOfficeBox'
, ad.address_ad_cityAs 'l'
, ad.address_ad_CountyAs 'st'
, ad.address_ad_postcodeAs 'postalCode'
, RTRIM(ad.address_ad_telephone) +
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NOT NULL THEN
' (Ext: ' + RTRIM(a.othertelephone) + ')'
ELSE
CASE WHEN RTRIM(a.othertelephone) IS NOT NULL
AND RTRIM(ad.address_ad_telephone) IS NULL THEN
'Ext: ' + RTRIM(a.othertelephone)
ELSE NULL
END
ENDAs 'telephoneNumber'
FROM employee e
LEFT
JOIN career c
ON c.parent_identifier = e.unique_identifier
AND c.career_date =(
SELECTmax(c2.career_date)
FROMpwa_master.career c2
WHEREc2.parent_identifier = c.parent_identifier
ANDc2.career_date <= GetDate()
)
AND c.datetime_created =(
SELECT max(c3.datetime_created)
FROMpwa_master.career c3
WHEREc3.parent_identifier = c.parent_identifier
ANDc3.career_date = c.career_date
)
LEFT
OUTER
JOIN AD_Import am
ON am.employeeNumber = c.manager_number
INNER
JOIN AD_Import a
ON a.employeeID = e.unique_identifier
LEFT
JOIN AD_Telephone t
ON t.unique_identifier = e.unique_identifier
LEFT
JOIN AD_Address ad
ON ad.address_pwa_location = e.location
LEFT
JOIN xlocat l
ON l.code = c.location
WHERE (a.employeeNumber IS NOT NULL
OR a.employeeID IS NOT NULL)
SQL Server Execution Times:
CPU time = 0 ms, elapsed time = 0 ms.
(1706 row(s) affected)
Table 'AD_Import'. Scan count 4, logical reads 106, physical reads 0, read-ahead reads 0.
Table 'AD_Address'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0.
Table 'AD_Telephone'. Scan count 2, logical reads 10, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 868, logical reads 956, physical reads 0, read-ahead reads 0.
Table 'xlocat'. Scan count 2, logical reads 8, physical reads 0, read-ahead reads 0.
Table 'career'. Scan count 5088, logical reads 2564843, physical reads 0, read-ahead reads 0.
Table 'people'. Scan count 1697, logical reads 5253, physical reads 0, read-ahead reads 0.
Table 'Worktable'. Scan count 826, logical reads 914, physical reads 0, read-ahead reads 0.
SQL Server Execution Times:
CPU time = 15203 ms, elapsed time = 8114 ms.
Any advice on what I can do to optomize?
Oh judt to point out that "employee" is a view on the "Table 'people'."
EDIT: I know it's pointing out the obvious, but I'm pulling out the managers "DN" from AD_Import based on the manager_number and employeeNumber matching.
Calculate Elapsed Time Between Dates And Exclude A Time Span.
Dec 18, 2007I need a formula to calculate the time (let's say in minutes) between two dates/times.
The problem is that I have to exclude the time between 06 PM and 06 AM and also exclude the time in the weekend (Saturday and Sunday).
I will use this in a couple of reports made in Reporting Services.
If anyone have an algoritm that could be modified for this and is willing to share this I would be very grateful.
Many thanks!
/Per Lissel
Global Temp Tables Getting Dropped Form Time To Time
Apr 10, 2007Hi all,
I have created several global temp tables to cache some intermediate results ...
However, it seems that after a while those tables will be dropped by SQL Server 2005 automatically (I have not restarted the server and no drop table statement ever executed against those tables). Is this a feature by design? How to make those global temp tables persistence to next service restart?
Thanks,
Ning
Handle Time Zones And Daylight Savings Time In SQL Server
Dec 19, 2006I wanted to know how we can handle Time Zones and Daylight Savings Time in SQL Server 2000 as well as 2005.
Any pointers would be helpful.
Pranav
Reporting Services :: Parameter Filters - Start Time And End Time
Sep 14, 2015At the moment I already added the DataSet I'm gonna be using. I have 2 date parameters Start Time and End Time.
What I would like to do  for the report is to only pull results greater than 48 hours to the report
How can I accomplish this?
How To Find Point In Time Or Last Committed Time In Log Backup
Jun 25, 2015I am reading about the RESTORE command to a point in time using logs, I would like to know the minimum point in time recovery for a backup image using T-SQL command before applying a log restore and what are the log ranges needed for the restore during restore.
 My Version 2008 R2
A Key Time As A Split Variable In Microsoft Time Series?
Jul 4, 2007Hello,
I was working with Microsoft Time Series model (MTS) with some data, when in the mining model viewer, decision tree tab, I realized that the key time variable that I define, it was acting like a split variable.
So, I ask you, this is possible?, because, for me, this should not happen€¦.
After, I review the Data Mining Tutorial by Seth Paul, Jamie MacLennan, Zhaohui Tang and Scott Oveson, and I found, in the Forecasting part, that the key time variable (Time Index) it was acting like a split variable too, in for example, M200 pacific:Quantity and R250 Europe:Quantity.
So people, it€™s possible that a key time variable act like a split variable in a MTS model?
Thanks