Hi all,
My application is developed using VB6.0 and SQL Server 2000. Frequently the application displays error message, which says 'Timeout Expired - occurred while getting records" when no. of users grows more than 20. We are using processor based licence SQL Server.
Under what are all the scenario, this error may come? Anybody explain me.
Thanks in advance.
K.Manoharan
How can I configure SQL Server 2000 to close the connections that has been inactive/sleeping for more than "X" minutes?
View 6 Replies View RelatedHi All,
I have the same question and error that Chopaka is getting:
"I have a SQL 2005 job that calls a stored proc. The job step returns the message "Query timeout expired....Message 7412...The step succeeded." The proc never actually ever did anything due to the query timeout, and the job continued on to other steps. I'm going to address the timeout issue eventually, but first I'd like to trap the timeout problem and force the job to end.
It appears that the query timeout isn't really an error, just a message. I've tried TRY-CATCH in the SP but the situation isn't caught, again probably due to the interpretation that it isn't an error."
I have reduced the "Remote Query time out" to 1 sec, in order to catch the error and to prevent the job from running, but the error is not caught.
Is there a way to catch this in the SQL or in the job step to prevent the job from continuing?
This is the script that I'm using without any luck
BEGIN TRY
BEGIN Transaction
Create table #tmpSummaryTable
(
)
insert into #tmpSummaryTable
select * from CDRServer01.iXtemp.dbo.gx_tbFTRSummary_test
COMMIT Transaction
END TRY
BEGIN CATCH
DECLARE @err int
SELECT @err = @@error
PRINT '@@error: ' + ltrim(str(@err))
SELECT ERROR_NUMBER() ERNumber,
ERROR_MESSAGE() Error_Message
ROLLBACK
Return
END CATCH
We have a stored procedure that is creating information in tempdb table and using cursors. It is suppose to produce a report of about 1000 records. If we run the stored procedure as a sql query then it works fine. If we run it using the VB app. it times out with the following message:
[Microsoft][ODBC Sql Server Drive]Timeout expired(#0)
Is there anything I can do to correct this problem?
Thank you,
Tracy
Hi
here is from BOL
>When a conversation is marked delayed, Service Broker performs the matching process again after a timeout period. Notice that failure to find a matching route is not considered an error.
for example it could happen when there is no route for a service.
the question is - what is this timeout. Is it configurable? on a system wide
basis ?
It will be great if this process is described in more details.
Best regards,
Leonid.
Hi,
I am running a stored procedure that collects some records from two tables do some calculations with those records and insert those calculation result in a temp. table. I am calling this stored procedure in my aspx page and then later select all the records from temp table and show it in a table.
When I run this application on browser it give me Timeout expired error but whn I execute the stored procedure it runs properly but takes around 3:10 mins to execute in query analyzer. I did some google work and based on that I specified CommandTimeout = 300 for SP and Connection timeout=400 in web.config. But still it didnt worked. Sometimes it runs properly but sometimes its not.
Where I am doing mistake? and Wht should i do to resolve this? Plz. help.
Thanks in adv.
Regards,
Yogita
Guys,
I am trying to attach a database object to the App_Data directory I got thie error
Error: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
This is what I did. I right click the App_Data folder and click Add New Item. Then I click the SQL Database. This is where I got the error.
What should I do? Please help
sorry for posting a question that has probably been posted hundreds oftimes, but i can't seem to find the answer i need...We're using a SqlServer 7.0 database and recently started getting timeout expirederrors on our views, which i'm assuming is due to the volume ofrecords in our tables. Unfortunately i'm not too experiences w/indexing tables, so my question is:1) how do you determine which fields to index (does it have to be afield w/ no nulls, no duplicates..similar to primary key), and why notindex the primary key2) is it better to index the same field on different tables, or is ita better design to index a different field for each table (ex. do youwant to index the same field that you link the different tables with,or do you want to avoid doing this)3) can somebody explain the concept of creating a clustered index4) once table is indexed, if there are users accessing the linkedtables via Access, do they have to re-link the tables?sorry for the number of questions and what may appear to be simplequestions to most, but again, i'm pretty unfamiliar w/ indexing andwould really appreciate any help...thanks
View 1 Replies View RelatedHi,I
get this error from our web application every once in a while. " Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding". I email
myself when an error occurs, and once every 2-3 days I get this timeout
error emails, like 5-10 emails in a span of few minutes. Then it goes
away. I have set the command timeout for 60 secs.
It
doesn't happen from the same stored procedure, actually I have seen it
timeout from really simple 1 or 2 line stored procedures, which shouldn't normally take 1 sec. Its like
sql server just shuts down for few minutes. We have some
backups and maintenance jobs scheduled, but they run only after
midnight. I have checked the
application event viewer, there are no warnings or
error messages for MSSQLSERVER. Can
any one tell me how to check whats going on during that short timespan
when timeout error occurs, and what causes it? I don't want to run sql
profiler continuously for 2-3 days, I am afraid it will slow down the
server more. Thanks.
Error below was returned from an agent job:
OLE DB provider "SQLNCLI11" for linked server returned message "Query timeout expired". [SQLSTATE 01000]
A linked Server was set up against a remote database to backup a database and it runs perfectly well when executed directly against the remote server but returns the above error when set up through Sql Server Agent. Permissions are good as the step returns success. I reset the query timeout property to zero but error persist. What else should I be looking at to make this work?
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
The following error keeps occurring every 30 minutes in error logs. "The specified user account has expired".
Has anyone ever come across this error message?
Hi all,Suppose I have a SQL database table called Customer Info which contains six fields namely Customer ID, Address, First , Last Name , Password, and Time Remaining. The Time Remaining field contains the amount of time that a customer has before his or her password expires. I would like info in this field to be in hours and minutes and when it reaches zero, I would like the password to be deleted from the database. So I have two questions and please take into consideration that I am using dot net 2.0.1) Can this be done without having to write a custom function?2) If this can only be done by creating a custom function, how would I get the function to communicate with the database, in other words how would I let the function know that a customer's time is up? Any suggestions will be greatly appreciated, thank you in advance for your help.
View 2 Replies View RelatedI have a maintenance plan setup to expire backup sets after 4 days, but its keep backup copies for an infinite amount of time. I might be misunderstanding whats suppose to happen, but I would expect the files to be removed after 4 days.
View 3 Replies View RelatedHi everybody,
I do custom log shipping over network like
step 1 backup log to C:..
step 2 zip log file c:... zip
step 3 copy zip to \sm01
estorelogs...
step 4 unzip file
step 5 restore log with stand by
Few times a month it fails with
Error = -2147467259 (80004005) Error string: Timeout expired Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 0 (0) Error string: Timeout expired Error source: Microsoft OLE DB Provider for SQL Server
Any idea ,what might cause it ?
Thank you
Alex
I've received this error twice over 2 days in the SQL Agent error log during off-hours from a server which has not had any changes to it in the last few months (once at 3:32AM and the next day at 3:46AM. I've been able to tie it to log-shipping backup jobs (all of which run under the SQL Service domain account) which run every minute. It seems to be only momentary, as the next attempt a minute later is successful.
I get the same set of messages for each database for the same time which look like this:
Date 07.03.2008 3:31:51 AM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[298] SQLServer Error: 258, TCP Provider: Timeout error [258]. [SQLSTATE 08001]
Date 07.03.2008 3:31:52 AM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[165] ODBC Error: 0, Login timeout expired [SQLSTATE HYT00]
Date 07.03.2008 3:31:52 AM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[298] SQLServer Error: 258, Unable to complete login process due to delay in login response [SQLSTATE 08001]
Date 07.03.2008 3:31:52 AM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[382] Logon to server '(local)' failed (SubSystemStepHistoryLogger)
I can't find any documentation on these errors on the web or MSDN site. Can I chalk this up to possibly "winking" connection to our domain controller? We've never had these messages before, and our LAN department swears that there have been no upgrades to the network or domain controller servers recently.
We have several large government web sites that we help look after. We recently migrated one of them from SQL Server 2000 to 2005 and are having a problem with our nightly email job in that if it runs for more than an hour then after exactly 1 hour the email job gets a "Timeout expired" message back from SQL Server.
Our batch jobs do run on a different server and connect remotely to our SQL Server DB. I did change the connections - remote query timeout and increased it 10 fold, but this didn't make any difference. Is there any other parameter that may be causing the Timeout expired error after exactly 1 hour?
Thanks !
I would like to set the default value of a field to GetDate() + two months.
Is it Possible?
Thanks
How can you force a password, from a sql login, to expire?
I would like to use the password expiration feature for sql logins in SqlServer 2005. The msdn document provides example code for SqlClient SqlConnection.ChangePassword like in Bob Beauchemin's book. http://msdn2.microsoft.com/en-us/library/system.data.sqlclient.sqlconnection.changepassword.aspx
There is a modify_date in the system view sys.sql_logins but that is read-only.
Thanks,
Karl
This question is related to VSTS and above parameters in the request. Question is:
A script created with VSTS for testers has hard coded values for ReportSession and ControlID in the requests, These IDs are expired after some time and scripts fails to run after few hours. Can some one tell me how to set the session expiration time on these ID's in the Report server so I can increase the value to 60*24*365 (1 year) this would solve my problem with hard coded values in the scripts for above mentioned IDs.
I have a design question that I was hoping you all can help with.
When I normally design a table I always make sure to include a status field. This way I can "delete" a record without actually having to delete it, just update the record to a status which signifies deleted. This ensures my users have an undelete capability as well as safesguarding against the "mad clickers" which click right through the "You are deleting this record..." alerts.
I have been recently adding tables which have temporary records and are meant to expire at a certain date. I have designed these tables to have an expiration date field AND a status field.
My question is this: What is the normal convention relating to these types of records/tables? Should queries using these types of tables query them using the status AND the expiration date? Should you create a job that updates the records status based on the expiration date being passed. Should you use a view that only displays current records based on expiration date?
I just want to make sure Im following standard practice as I design these types of tables.
Thanks for your help!
Hi,
where can i see how many days are left until the SQL 2005 Evaluation Edition expires after 180 days?
Is there a way to set up automated email notification beginning 14 days prior to when a SQL Server Login password (that has "Enforce password expiration" enabled) will expire?
Thanks,
-Dave
I have a question regarding notification of password expirations.
Background: My workplace will soon be enforcing the password policy and password expiration facilities in SQL Server 2005. My understanding (and correct me if I am wrong) is that the period of validity for a password before expiration occurs comes from either active directory, or where there is no AD, the local machine security policy.
Because we are on a Novell network our SQL2K5 servers are all mixed authentication. For development purposes we are each given a separate account. Our applications, too, use sql accounts (not windows accounts) for database access. Having a development account expire unexpectedly is no problem; we'll change those passwords as they need to be. What I am concerned with is the accounts our applications use to access the database server; like most IT shops, our applications need to be available with interruptions in service as minimal as possible.
I would like to create and schedule a report to run every morning listing those accounts that are about to expire, or have expired, so that those passwords can be changed with little to no interruption in service.
Question: Where do I pull this data from? I couldn't find anything in the BOL, or online (so far), giving the details of how to determine when a particular account is nearing expiration, or has expired.
I would appreciate any advice anyone has to offer.
Best,
B.
Hi,
I have Table (RatesTable) every user can insert records to this table, and all users can see this records, this table contain the following columns:
RateID, Service, Rate, DateTime, User
Want I want is a code (trigger) in the database can do the following:
If user perform an Update request the code will check:
- if this recored inserted by the same user update command will be execute.
- if this recored inserted by other user: update command will not execute and return message.
- if more than 5 minutes passed the update command will not be execute and return message.
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies View RelatedMy apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
Trying to connect to remote server croaktoad.simpli.biz
I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.
However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message
C:sqlcmd /Scroaktoad.simpli.biz /E
HResult 0x52E, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [1326].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired
So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?
where can i find it?
thanks
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis