The SQL query takes about 4 minutes to execute in SQL Management Studio. But when I run it from the Script Task using the OleDBCommand, I got the timeout error in 40 seconds. The timeout setting on the SSIS DB connection is 0. I do not see how to set the timeout for an SSIS task. Any thoughts on this problem? TIA.
Hi,
I have written a stored procedure that i then execute in a loop within a wrapper procedure:
WHILE somecondition
BEGIN
EXEC dbo.PROC1
END
If i run the procedure manually i can run it time after time with no error. However if i execute the procedure above i get a timeout error after about 2 or 3 loops.
How can i avoid this?
I have been reading everywhere and i dont seem to be able to find a solution...
I was having some errors from the webpage accessing the OLlinks table in the database.
Error executing non query: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at admin_admOLEditLinks.selectData(String strID) in e:wwwroothomeadminadmOLEditLinks.aspx.cs:line 101DateTime:5/23/2007 1:14:10 PMSource:http://www.myDomain.comiAdmin/admOLEditLinks.aspx?ID=3ErrorMessage:Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
I kept getting the above error so then I try to access the table directly inside of MS SQL Server Management Studio and then I recieved the following error:
SQL Execution Error.
Executed SQL statement: SELECT lnkID, linkFromID, linkToID FROM OLlinks
Error Source: .Net SqlClient Data Provider
Error Message: Timeout expired. The timeout period elapsed prior to completion of the opration or the server is not responding.
Open any other table works fine except this table only. Any help is much appreciated.
I get the following error message:
SQL Exectution error,
Exectuted SQL statement: SELECT...
Source: .Net SqlClient data provider
Message: Timeout expired, timeout period elapsed prior to completion of the operation...
The view is operating on a table of ~250,000 records. The timeout occurs after 45 seconds, and none of the changes I make to the various timeout settings in the server or database seem to affect this.
When I execute the same sql statement in a query window it does complete, requiring about 7 minutes to execute.
How can I configure the view not to timeout when executing this query?
- Jim
Hi,
I have developed reports for Oracle database. I wanted to avoid use of OUT REF cursor hence am using function & calling it from reports.
The logic in SP/function is so complex that it takes 5 mins to execute n get the result. I see the results on the report server, But when I call that report from web application, I get System.Net.WebException - Time out error.
My questions:
1. What setting I make on report server to avoid timeout?
--Are these settings applied on report server restart?
2. Is there any setting needed for Datasource also?
TIA
Tanmaya
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
Hi All,
This is first time I am trying to ste timeout on SSIS package ,Can some one let me know which is the best way to set timeout for connection?
And what is the difference between General TimeOut and Command TimeOut?
Thanks,
Shilpa
HelloI am trying to execute ‘xp_cmdshell' from within a DTS package thatwas created by another person. When I try to execute that ‘SQL Task'selectively from within the package, I get the following errormessage:Error Title: Package ErrorError Details:Error Source: Microsoft OLE DB Provider for SQL ServerError Description: xpsql.cpp: Error 87 from GetProxyAccount on line604Why is this error message popping up? When I create a new package(myself) and create an exact same SQL task as above and run it, theSQL task runs fine.Appreciate any help / feedback.Thanks in AdvanceJagannathan Santhanam
View 1 Replies View RelatedHi all,
After applying the SP2 for Korean - we are getting the following error in the above task.
Transfer Fact Data From StagingDB to Presentation DB: Insert Update MetricFact [1021]: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "'OPTIMIZE' ??? ??? ???????.".
Not sure what the problem is. The same task was running properly before applying the SP2.
For other language SP2 (on other languages) the same task runs correctly and without any error.
hi,
I am having trouble executing a DB2 stored procedure using OLE DB command task.
The stored procedure takes 2 paramters.
1. filename 2. logfilename
filename - servernamefoldername extfilename
logfilename - servernamefoldernamelogfilename
Both are user defined variables with data type string. i created 2 dervied columns FILE and LOG to pass these values.
FILE takes the filename value
LOG takes the logfilename value
When I execute it gives me the following errors.
[OLE DB Command 1 [77]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "IBM OLE DB Provider for DB2" Hresult: 0x80004005 Description: "[DB2/NT] SQL0811N The result of a scalar fullselect, SELECT INTO statement, or VALUES INTO statement is more than one row. SQLSTATE=21000 ".
[DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Command 1" (77) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
Can anyone please help me resolve this issue.
I can execute the SP using execute sql task but the problem is I need to pass the rejected rows to a reject table for logging purposes. thts why am tryin the OLE DB command.
Thank You
Hi,
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.
We have a stored procedure that will return at most about 600 records. In almost all cases it works fine, but in a few odd cases the command times out when used from a webform. We changed the CommandTimeout property to 120 seconds... no difference. If we run a query that times out in Query Analyzer, it runs in under 3 seconds (on the SQL Server machine). We also did a lot of profiling, and for any page that runs fine, the query takes about the same time when called from a webform and run in the Query Analyzer.
We ran our tests on the pre-production environment with absolutely no one else on the machines. We also created a test page that just fills a DataSet. Straightforward... get connection object, create command, set params, create data adapter, fill dataset. It suffers the same problem.
The web server and SQL server are two separate machines. Oh, and before I forget... This is SQL 2000. It used to run SQL 7, and all the queries there were (slightly) slower, but none timed out, not even the ones that do now.
Maybe the first question should be:
How can it be that a query that runs fine in Query Analyzer times out from a webform?
Hi All,
I have an application on asp.net framework 1.1 and accessing the ms sql server 2000.I like to stop the execution of some queries if it exceeds a pre defined limit.
I was reading about this and learned that we can do this by setting the command.commandtimeout=value.
THis is the code i am using to test this-Dim conn1 As SqlConnection
Dim sqlcmd1 As StringDim cmd1 As SqlCommand
Dim StrConn As StringDim dr As SqlDataReader
StrConn = ConfigurationSettings.AppSettings("ConnectionString")
sqlcmd1 = "Select * from table"conn1 = New SqlConnection(StrConn)cmd1 = New SqlCommand(sqlcmd1, conn1)
conn1.Open()
cmd1.CommandTimeout = 1
Response.Write(cmd1.CommandTimeout.ToString)
dr = cmd1.ExecuteReader()Do While dr.Read
Response.Write(dr("id") & vbNewLine)
Loop
conn1.Close()
conn1 = Nothing
dr.Close()
Now ,the sql statment -select * from table takes more than 40 seconds when i excute this in the sql query analyser.As you see in the code,i want to stop processing the code if it exceeds more than 1 second.
But this doesnt work..and the query gets executed and write the data on the web page.
Any help on this?why this is not working?Is there any settings that I need to change in the machine.config?
Thanks in advance.
Hi,
i've a ASP application builds SQL for a report component; report execution get an error about command timeout, since i can't set it (i pass only query and connection to this component) is there a default generic option (for the SqlServer instance) that permits to me to increase this value?
Thanks : :D
hi.
I must get i trigger the sql command, which execute trigger.
Here is the block of the sproc that I?ve created. All lines executefine except for the ?exec master..xp_cmdshell @reboottc?. In order tomake this work from the query analyzer I had to set the MSSQLSERVERservice to have the same credentials as the thin clients we are tryingto shut down, that means the service is running as an Administrator onthe sql server with the same u/p as administrator on thin clients.declare @RoomNumber varchar(6) -- for testingset @RoomNumber = '1144' -- for testingDECLARE @RoomIP varchar(15), @RebootTCvarchar(120), @shutdownStart varchar(20), @shutdownEnd varchar(85)-- @ShutDownStart and @ShutDownEnd will be usedwith the @RoomIP to build the shutdown command sent to the thinclientsSET @ShutDownStart = 'shutdown -r -f -m \'SET @ShutDownEnd = ' -t 5 -c "MandatoryiConnect Reboot issued during guest check in/out process"'SELECT @RoomIP = IP FROM Rooms WHERERoomNumber = cast(@RoomNumber AS INT)SET @RebootTC = @ShutDownStart + @RoomIP +@ShutDownEnd-- print @RebootTC -- for testing-- @RebootTC ends up looking like the line below based on the@RoomNumber-- shutdown -r -f -m \172.18.16.103 -t 5 -c "Mandatory iConnectReboot issued during guest check in/out process?-- Also the command below runs correctly when executed from SQL QueryAnalyzerEXEC master..xp_cmdshell @RebootTC
View 1 Replies View RelatedHi,
I am running a stored procedure that collects some records from two tables do some calculations with those records and insert those calculation result in a temp. table. I am calling this stored procedure in my aspx page and then later select all the records from temp table and show it in a table.
When I run this application on browser it give me Timeout expired error but whn I execute the stored procedure it runs properly but takes around 3:10 mins to execute in query analyzer. I did some google work and based on that I specified CommandTimeout = 300 for SP and Connection timeout=400 in web.config. But still it didnt worked. Sometimes it runs properly but sometimes its not.
Where I am doing mistake? and Wht should i do to resolve this? Plz. help.
Thanks in adv.
Regards,
Yogita
Guys,
I am trying to attach a database object to the App_Data directory I got thie error
Error: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
This is what I did. I right click the App_Data folder and click Add New Item. Then I click the SQL Database. This is where I got the error.
What should I do? Please help
Hi,
Can the DB CommandTimeout property for SQL be added in web.config for a project globally? Currently, I am changing the property before each call, but if I can add a value in web.config that would make things more efficient.
Thanks
We're running an ASP.NET 2.0 website which connects via a local connection string (192.168.1.5) to a SQL 2005 database. There is only one database on the server. The application has been running smoothly for months but has recently started receiving command timeout errors. The error follows:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
From what I’ve read online, people suggest increasing the command timeout parameter, but I don’t think that’s the solution to our problem. Our website only uses 22 different SPROCS on the front-end, and only a few of them retrieving anything sizeable. What’s more, these stored procedures run in under a second under normal circumstances.
Our hosts tell me that there is very high I/O activity on the server. There were 20,000 writes to TempDB in a 30-second period for instance. What exactly would cause that level of writes to the DB? It’s also odd that this problem only happens intermittently. For instance, we’ve been receiving these errors to the tune of 1-5 per three hour period.
Does anyone have an idea what we should look at to determine what the TempDB would be getting hit so hard?
Thanks,
Brad
I'm having timeout issues with a few stored procedures which do calculations and take a while to return data (like 2-3 minutes).
I'm getting timeouts when I try to run them in my asp.net page.
From my research it seems that I need to increase the Command Timeout setting. I'm storing my connection string in my web.config file and I can't seeem to get the syntax correct for increasing the command timeout setting.
Can someone show my how it's done.
My connection string (from web.config):
<appSettings>
<add key="DataGold" value="server=localhost;uid=datauser;pwd=qu3ry;database=DataGold" />
</appSettings>
TIA.
Hello,
can someone tell me where I can look to find a sql command that
is being executed by an application against my database?
In Oracle, I look in the v$sql_text view - is there something
similar in SQL Server 2000 ?
Many thanks in advance
How can I execute a sql task from a script task. Both these tasks are part of the same package. The script task is actually part of the error handler. The execute sql task is part of control flow in the package.
Thanks
Hi,I
get this error from our web application every once in a while. " Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding". I email
myself when an error occurs, and once every 2-3 days I get this timeout
error emails, like 5-10 emails in a span of few minutes. Then it goes
away. I have set the command timeout for 60 secs.
It
doesn't happen from the same stored procedure, actually I have seen it
timeout from really simple 1 or 2 line stored procedures, which shouldn't normally take 1 sec. Its like
sql server just shuts down for few minutes. We have some
backups and maintenance jobs scheduled, but they run only after
midnight. I have checked the
application event viewer, there are no warnings or
error messages for MSSQLSERVER. Can
any one tell me how to check whats going on during that short timespan
when timeout error occurs, and what causes it? I don't want to run sql
profiler continuously for 2-3 days, I am afraid it will slow down the
server more. Thanks.
Hello,
I'm using a context connect inside a CLR stored procedure. The CommandTimeout property has no functionality when used with a context connection. See remarks in this url:
http://msdn2.microsoft.com/en-us/library/system.data.sqlclient.sqlcommand.commandtimeout.aspx
This is a problem for me because I'm at times call a link server that has been known to wait indefinitely. I've tried using a regular conneciton that supports command timeouts within my CLR stored procedure but I get a permissions error (Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0,0, Culture=neutral failed.)
How can I prevent my CLR stored procedure from waiting indefinitely?
Thanks.
Hello
I am trying to execute SQl script from command prom like this :
C:Inetputwwwroot> osql -U sa -P -i MyComics.sql
(uid=sa and pwd=)
and I got the result like this :
[Shared Memory]SQl Server deos not exist or access denied
[Shared Memory]Connection Open (Connect()).
I already check the SQL server , it's running.
what do I do now?
Thanks in advance
I see a weird behaviour when the package is executed as a SQL Server job and via command line. The package has environment variables configured. So when I run the package via a command line it picks up the user environment variables and gets executed fine with success. But when the package is scheduled as a job, it fails as it is not picking up environment variables. Does the SQL server has to be restarted to pick up the environment variables? I dont understand the reason of not picking up the environment variables when the package is run as a job. The job runs as the same user as the command line and the user variables are set for the environment variables. The logging is enabled on the package and I can see that it is logging as the same user even if its command line execution or executed as a job. Could you please anyone can explain why the package fails as a job and doesnt fail via command line. I am fighting with this for a long time.
Thanks
I'm trying to use an SSIS script component that will go do a DNS lookup on the contents of an input column. I've already got a vbs function that performs the wshshell.exec and parses the answer for address and/or errors. I'm having trouble with syntax for the call. When I attempt to run it, I get a lot of errors like "Name 'wshell' is not declared", "StdErr" is not a member of 'String'"
Does anyone have an example of a script that calls a command?
I'm fairly new to SSIS, but think I've properly set up the inputs and outputs.
Happy new year everyone!!!
Ok, now for my not so happy new year problem ... here's the scenario:
I have a simple task of exporting data retrieved by a parameterized stored procedure to a delimited text file ... task done in 30 mins max using dataflow task from OLE DB Source with SQL Command to Text File Destination ... thank you very much SSIS!
But the problem is the OLE DB Source executed the SP MULTIPLE TIMES (3 to be exact)
Actually configuration is:
1. OLE DB Source
2. SQL Command access mode
3. The following command written in the command text box:
SET FMTONLY OFF;
exec sp_SampleSP @param1=?, @param2=?
4. Configured parameter mapping.
The stored procedure logs to a database table everytime it is executed to report how many rows were selected (please don't crucify me with this method, i'm re-using procs from old system). The log shows that during execution of this package the SP was executed on 3 times.
Help anyone? Please ...
I know that connecttimeout and commandtimeout are separate entities. Is it possible to change the default command timeout value by changing the connection string?
I need to increase the command timeout and want to know if I can do it without changing my code and rebuilding my ASP.NET 1.1 web app.
Thanks in advance. -- ZLA
How do I execute below scripts using CMD:
Please Note: SQL server 2008r2, default instance with window Authentication.
1. Select * from Adventurewoks2008.Person.Person where Id = 5
2. Exec usp_getemployee (with parameter Manager_id = 100)
3. I have a folder named 'MyFolder' which contains 3 store procedures (usp_A, usp_B and usp_C).
How do I execute all 3 using CMD against AdventureWorks database.
Hello,I'm trying to execute a file containing few SQL statements.CREATE VIEW test1 AS SELECT * FROM table1;CREATE VIEW test2 AS SELECT * FROM table2;The standard SQL way is to end a statement with semi-colon.But doing that,it doesn't work in SQL Server.After changing ";" to "GO", it works fine.Is there anyway we can stick to ";" to indicate the end of statement.I don't want to create scripts which works only in SQL Server.Please comment.Thanks in advance.
View 3 Replies View RelatedWe run std 2008 r2. I'm trying out the commandtimeout property of an oledb source. I set it to 30 expecting 30 seconds. if connection and or execution exceed that threshold, will the pkg fail?  Either way is there a way I can detect that the threshold was exceeded?Â
View 3 Replies View Related