I can't delete records for a SQL Server table when I attached the table to Microsoft Access 97. I time out when I try to delete the record. However I can query the table.
I use the standard ODBC setup, do I need to do anything else beside using the standard Access link.
Thanks in advance
Hi,
I have two windows 2000 server with sql server 2000 installed. I want to record one server in the enterprise manager of the other server.
But, I receive an error as "Timout expired". So the record could not success !
Please help me
Michel
Hi,
I got this error when I deploy a mining model.
--
Error 1 OLE DB error: OLE DB or ODBC error: The query has been canceled because the estimated cost of this query (628) exceeds the configured threshold of 300. Contact the system administrator.; 42000. 0 0
Error 2 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Revenue Labeled Prod ~MC-LPROD', Name of 'Revenue Labeled Prod ~MC-LPROD' was being processed. 0 0
--
I don't understand why this happens. Previously I've created one cube and 4 dimensions. I got
the same error before. I think the cube was the culprit so I removed the cube and dimensions.
After removing them, I build the project. Successful. But fail again when processing the
mining model. The mining model was fairly simple, only 3 columns (one key time, one key,
one input as well as predicted column, using Microsoft Time Series algorithm).
Why the estimated cost is even higher when I created another project using only one table (Revenue, the same fact table)?
Error 1 OLE DB error: OLE DB or ODBC error: The query has been canceled because the estimated cost of this query (1493) exceeds the configured threshold of 300. Contact the system administrator.; 42000. 0 0
I worked in local machine, there should be no network-related issue when querying. The
machine is 2-processor Xeon 2.4 GHz with 3 GB memory.
How to solve this problem? I have checked the Properties of Analysis Service. I have set higher value for timeout in ODBC Administrator.
Thank you,
Bernaridho
Hello,
I have an Access .adp file that's connected to a SQL Server. I can run small queries just fine, but some of my queries take several minutes to run. When I try to run a lengthy query I get an error message that says "Timeout Expired".
I believe that this error is the one that is described here on MSDN online:
http://support.microsoft.com/kb/243464
I tried to implement a solution similar to this in .adp file by creating this subroutine:
----------------------------------------------
Sub BypassTimeout()
CurrentProject.Connection.CommandTimeout = 0
MsgBox "The subroutine ran"
End Sub
-----------------------------------------------
I know that the subroutine is running because I'm seeing the message in the MsgBox statement. (This sub runs everytime the .adp file is opened).
However, doing this still doesn't seem to prevent me from getting the "Timeout Expired" error message when I try to run a lengthy query.
Does anyone know a way around this? I believe the default timeout is 30 seconds ... but SURELY microsoft did not intend for .adp files to not be able to run queries that are longer than 30 seconds.
I have three tables
1. membership table(aspnet_membership table)
2. User Contacts table
3. Address table
These three table have relation ship with one another through a UserId field.
How will you set up cascaded delete on these tables, Like if I delete a user in the membership table I want the related records in the other tables to be deleted as well. Cascaded delete is it something done through code, or is it definde when the tables are created.
Please advice.
Hey Guys,I have Performance Monitor running and storing the network usage to my MsSQL database, and this is done a few times a minute. I have a page that then shows show much of my bandwidth is being used. As you can gather, the database quickly starts filling up with hundrreds of records so I could do with a script that delete these records. I cant simply delete all records because that would cause my webpage to fail so I need a way to delete all records apart from the latest one. Wondering if anyone would know how I could do this?
View 3 Replies View Relatedhi to all,
How to delete duplicate record in the recordset?
Thanks...
Hi SQL gurus,
I have a form that depending on the outcome, will either add, update or delete a record.
1) If there IS NO record of "this" and "that" and Request("x") <> "" it will add a new record.
2) If there IS a record for "this" and "that" and Request("x") <> "" it will update column 1,2,3 or 4.
3) If there is a record for "this" and "that" and Request("x") = "" it will delete the record.
My problem is if there is a value in request("1") it works fine, but if there is no value in ("1") and there is a value in 2, 3, or 4 it will delete the record.
If request("1") <> "" OR request("2") <> "" OR request("3") <> "" OR request("4") <> "" Then
sSQL = "SELECT * FROM some_column WHERE this = '" & request("this) & "' and that = '" & request("that) & "'"
oRS.Open sSQL,oConn,adOpenKeySet,adLockOptimistic
If oRS.EOF Then
oRS.Addnew
oRS.Fields("this") = request("this")
ors.Fields("that") = request("that")
Else
ors.Movefirst
End If
oRS.fields("1") = request("1")
oRS.fields("2") = request("2")
oRS.fields("3") = request("3")
oRS.fields("4") = request("4")
oRS.Update
oRS.Close
Else
sSQL = "Delete from some_table Where this = '" & '" & request("this) & "' & "' AND that = '" & '" & request("that) & "' & "'"
objCmd.ActiveConnection = oConn
objCmd.CommandType = adCmdText
objCmd.CommandText = sSQL
objCmd.Execute
End if
Hope I explained that okay.
Hi All,I am using Microsoft SQL Enterprise Manager version 8.0 and havecreated a view from a combination of 4 different tables. I would liketo be able to go into sql and open the view and select a row anddelete that row however this seem impossible right now. I am not sureif it's possible to delete a row from a view?? Or could it be thatthese tables are all interconnected and in order to delete a recordthat is joined to one or more of the tables it has to be deleted atthe top level of the join heirarchy etc etc. (do you understand what imean?) Can this be done??Thanks in advance,Erin
View 4 Replies View Related
I create a package in SSIS and I can run it without any problem in BI studio. However, if I deploy it to a sql agent package and run it thru sql agent job.. I keep getting an error one of lookup transfomation is invalide..
I don;t understadn I can run the package in debug mode but why i keep getting an error when I deploy to a sql agent job?
hai dears i want to delete a row from the table on the basis of key sent in beusers obj
"connection myConn = new connection();" this is ma own class that establishes the connetion which works fine in other caseseg insert
'' it shows no error or exception ' but do not delete record
so plz tell me how to do this...
or whats wrong in this
public void delete(BEusers obj)
{
connection myConn = new connection();
oCommand = new SqlCommand("sp_delete_tbl_users_by_userid",myConn.sqlCon);
oCommand.CommandType = CommandType.StoredProcedure;
try {
myConn.OpenConnection();
sp = oCommand.Parameters.Add("@User_Id", SqlDbType.VarChar);
sp.Size = 20;
sp.Value = obj.user_id;
oCommand.ExecuteNonQuery();
}
catch (Exception oException)
{ throw oException; }
finally { myConn.CloseConnection(); }
}
Hey Guys,I have been trying to work out how I would delete a record that was created more then 10 minutes ago.I can use this to delete records older then a day.DELETE FROM DownloadQueue WHERE Downloading = '0' AND QueuePos = '0' AND DateTime < GETDATE() - 1Just need something now that will do it for just 10 minutes.Cheers.
View 1 Replies View RelatedHi ,
i am using sql server 2005.
i have one table where i need to find records that have same citycode and hospitalcode and doctorcode then delete the record keeping only one record of them
my problem is table structure have idendtity column which is unique.
that is m table structure is something like
recid citycode hospcode doctorcode otherdesp
1 0001 hp001 d0001 ...
2 0002 hp002 d0002 ...
3 0001 hp001 d0001 ...
4 0002 hp002 d0002 ...
please suggest
thank you
Hi,
I've noticed that after the first record from a ResultSet is deleted, HasRows property throws an exception like "The current row was deleted." Method ReadFirst() throws similar exception as well.
More details:
1. Create a ResultSet: ExecuteResultSet(ResultSetOptions.Updatable | ResultSetOptions.Scrollable | ResultSetOptions.Sensitive)
2. Let's say, there is no records in the resultset. Insert two new ones. Then call: ReadAbsolute(0); Delete(); HasRows; and the exception is thrown.
3. Then you can call ReadFirst() or Read with the same result.
4. Now call ReadAbsolute(0). It returns true. Call HasRows, ReadFirst() or Read() and you will get the exception each time.
I tried to explain this with the fact that Delete() doesn't change the current position of the ResultSet. But I don't see why that would mess the HasRows property or why after ReadAbsolute(0) retuns true, HasRows or ReadFirst() doesn't work.
Could anybody tell me what the problem is?
Thank you.
Hi,
I've noticed that after the first record from a ResultSet is deleted, HasRows property throws an exception like "The current row was deleted." Method ReadFirst() throws similar exception as well.
More details:
1. Create a ResultSet: ExecuteResultSet(ResultSetOptions.Updatable | ResultSetOptions.Scrollable | ResultSetOptions.Sensitive)
2. Let's say, there is no records in the resultset. Insert two new ones. Then call: ReadAbsolute(0); Delete(); HasRows; and the exception is thrown.
3. Then you can call ReadFirst() or Read with the same result.
4. Now call ReadAbsolute(0). It returns true. Call HasRows, ReadFirst() or Read() and you will get the exception each time.
I tried to explain this with the fact that Delete() doesn't change the current position of the ResultSet. But I don't see why that would mess the HasRows property or why after ReadAbsolute(0) retuns true, HasRows or ReadFirst() doesn't work.
Could anybody tell me what the problem is?
Thank you.
I am using the tables created by the aspnet_regsql.exe tool for security. Basically, I need to ensure that an account named Administrator is never deleted. I also have a role named administrator, and I need to make sure that Administrator is never removed from the administrator role.Can I create a trigger to ensure that the Administrator is never deleted and that the Administrator is never removed from the Administrator role? I know it will probably be two separate triggers: one on the aspnet_users table and one on the aspnet_usersinroles table.Thanks a lot for the help!
View 1 Replies View RelatedI can not get this stored procedure to delete my records...
I have a
contact table
RecordID
FirstName
LastName
etc
and a Address table
RecordID
Street
Zip
Town
Country
And a Relation table
RecordID
ContactID
AddressID
CreateDate
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[bc_Contact_Delete]
@ContactID int
AS
--SET NOCOUNT ON
BEGIN TRY
BEGIN TRANSACTION -- Start the transaction
-- Delete all Adresses
DELETE FROM [Address]
WHERE
RecordId in (SELECT ca.AdressId from [ContactAddress] ca
where
ca.ContactID = @ContactID)
-- Delete all Relations
DELETE FROM [ContactAdress]
WHERE ContactID = @ContactID
--- Delete Kontakt
DELETE FROM [Contact] WHERE (([RecordId] = @ContactID))
COMMIT TRANSACTION
END TRY
BEGIN CATCH
-- Whoops, there was an error
ROLLBACK TRANSACTION
-- Raise an error with the
-- details of the exception
DECLARE @ErrMsg nvarchar(4000),
@ErrSeverity int
SELECT @ErrMsg = ERROR_MESSAGE(),
@ErrSeverity = ERROR_SEVERITY()
RAISERROR(@ErrMsg, @ErrSeverity, 1)
END CATCH
RETURN
My Errormessage is
The DELETE statement conflicted with the REFERENCE constraint "FK_bc_ContactAdress_bc_Address". The conflict occurred in database "bContacts", table "dbo.ContactAddress", column 'AdressID'.
Can someone please post me an advice?
Hi frens
one of my site with the Databse workd fine while the other with the same database shows the following error:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
/Connection.asp, line 6
Hi all,
(I am using SQL Server 2005)
I have created a new 'CUSTOMERS' table and created a colum 'CustomerID' as an Identity column.
Now, a problem I find is that when I delete a particular record, its Identity value is used automatically for the New record I insert later!
I do not want to re-use the already used Identity value.
I just want to have the last CustomerID to be higher that all the previous ones.
Is there any way to do this?
Thanking you in advance,
Tomy
i have sql running on a server and i have about 6 pc accessing the db using a vb project. all of a sudden when ever the user tried to update or addnew data to the db the software would hang and i would get a microsoft sql timeout error. once i stoped and restarted the service everything seems to be fine. does the service need to refreshed on a regular basis? or could someting could of set the db in some sort of lock state?
if you have any ideas pleas let me know.
Thanks,
Thomas
i currently have more tha 3 million of records in my table in sql 7. i am getting timeout error in my web application when i try to insert a record in that table
what could be rhe reason for this? how to avoid this type of problem?
Thanks in advance
Anyone know if there is method that can insert all record from a tablein an MS Access 2000 database to a table in MS SQL Server 2000database by a SQL statement? (Therefore, I can execute the statementin my program)--Posted via http://dbforums.com
View 3 Replies View RelatedHey,
From time to time i get this error "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding." so I tried to change the connection string by adding thie following "Connect Timeout=200; pooling='true'; Max Pool Size=200" but still it is giving the same error! so why is this happening ? and what can I do!
btw the timeout expired happens when a stored procedure is executed at the Fill method !
Thank you in advance
Hiba
Hi All,
I am facing a problem in SQL Server 2005 and the .NET Environment. I have an SP, which will return me the result within fraction of second when i execute it in SQL Server Management studio. But randomly (Frequently), its giving timeout when i execute it from .NET Envirnment.
If i execute it at that same time in Management studio, i am not getting the error. But getting the Timeout when i execute it in the Server Explorere of VS 2005 or in the Application which uses it.
Can any one figure out the solution.
Hi Team Iam working in a asp.net web application. In my system i have installed the xp as os and the in my network is of 2003 server. All files and database are there. But when me accessing the files from my laptop it shows the error as follows Timeout expired. The timeout period elapsed prior to completion of the
operation or the server is not responding.Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Timeout expired. The timeout period
elapsed prior to completion of the operation or the server is not
responding.Source Error:
Line 19: con = New SqlConnection(constring)Line 20: If con.State = ConnectionState.Open Then con.Close()Line 21: con.Open()Line 22: cmdobj = New SqlCommand(query, con) Source File:
Y:Inetpubwwwrootsreeskybuilderssreeskybuildersdbmain.vb Line:
21 If me accessing that same from that mechine there were no errors and i can go thru that program successfully. So please help me to do access the db from anywhere in my network Thanks Rajesh.C.S
Hi!
I am having a problem with my windows app in VB.net. I am just trying to do a very simple select command to retrieve some data. I am using a hosting server with a VPN.
When i click on the button it keeps giving me the error above. When I use server management express to do the same query it works fine and relatively fast.
So I have tried setting the CommandTimeout to 120 but when it stops, the debugger shows that the value of the COmmandTimeout is 30, although it stops after about 15 secs.
I am really lost and would need some help please! Find my code underneath.
Private Sub RetrieveButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RetrieveButton.Click
'Create a connection string to connect to the database. Associate it to a connection object.Dim connString As String = "Data Source=192.168.24.75;Initial Catalog=edenoverseasproperty;" & _
"Integrated Security=SSPI;User ID=edenoverseasproperty;Password=blossomcar"
'Dim connString As String = "Data Source=JPCHENOTSQLEXPRESS;Initial Catalog=EdenOverseasProperty;" & _
' "Integrated Security=SSPI;User ID=sa;"Dim sqlConn As New SqlConnection(connString)
'Create a new command and associate the connection object to it.Dim cmd As New SqlCommand()
cmd.CommandTimeout = 120
cmd = sqlConn.CreateCommand()
'Define the command type and the source
cmd.CommandType = CommandType.Text
cmd.CommandText = "SELECT * FROM Clients"
'Create a data adapter and a datasetDim da As New SqlDataAdapter()Dim ds As New DataSet()
da.SelectCommand = cmd
da.Fill(ds, "Clients")
'Bind the data to the datagrid
EdenDataGridView.DataSource = ds
EdenDataGridView.DataMember = "Clients"
End Sub
Jean-Philippe
HI,
I am getting this error on web server. My Appication is working fine on my Local Network where DB server and web server are on different machine. But getting TimeOut on web server. I tested the query on Query Analyzer it takes hardly 3 sec (Max) to execute. There is only Select query and total number of records are around 2100 which is not a big data.
I have used Connect Timeout = 180 in connection string which is also not effective.
please tell me how can I handle this exception.
We've been having timeout problems.
In our development environment we have IIS and SQL Server 2005 both running on the same box. We use VWD or our dev server's IIS to run the apps.
What happens is the database stops responding to our web applications and we continue to get the timeout error. I can still execute queries from Management Studio but all of the web apps all timeout.
Then, the only was we can get the database to start responding again is if we restart the SQL Server service.
Any ideas as to why the database would stop responding to all of the web apps but not Management Studio? It tends to happen a couple times a day when we are developing. Only the other developer and myself use the DEV environment.
Hi Dear,I have some problem.Problem Is:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.I have two table.1. BlogUrl2.HistoryBlogstable BlogUrl has approximate 30 url(some part of url).and table HistoryBlogs has approximate 2,00,000(2 lac) record.table history blog has a colon blogUrl and a colon subject name.when a user select one url from blogUrl table then display all subject related to blogUrl.it's ok.but i want select all blogUrl related subject.my query is:SSELECT distinct S.subject_id as 'id', cast(S.subject_raw as varchar(8000)) as 'subject' FROM HistoryBlogs S where substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, charindex('/', substring ( cast(S.blog_url as varchar(8000)), charindex('/',cast(S.blog_url as varchar(8000)))+2, len(cast(S.blog_url as varchar(8000) ) ) ) )-1 ) IN
('-' , 'discussions.apple.com' , 'feeds.gawker.com' ,
'legalalan.blogspot.com' , 'real.estatez.net' , 'szeteng.blogspot.com'
, 'willdo.philadelphiaweekly.com' , 'www.beginnertriathlete.com' ,
'www.bestbuy.ca' , 'www.bestbuy.com' , 'www.binsearch.info' ,
'www.centennialcollege.ca' , 'www.chatsusa.com' , 'www.dvinfo.net' ,
'www.feedhub.com' , 'www.futureshop.ca' , 'www.libble.com' ,
'www.mcdonalds.com' , 'www.monova.org' , 'www.net-security.org' ,
'www.osnews.com' , 'www.senecac.on.ca' , 'www.shop.com' ,
'www.sumotorrent.com' , 'www.theimpulsivebuy.com' ,
'www.tomshardware.com' , 'www.wal-mart.ca' , 'www.walmart.com' ,
'www.xbitlabs.com') group by S.Subject_Id,cast(S.Subject_Raw as
varchar(8000))This query is ok.but when we want select all blogUrl.then i found above mention errori have asp.net 2.0 and sql server 2000.this type problem i am facing on remote serverPlease help me.Yogesh Saini
Hi I am getting error:Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not respondingMy Connection string is like this. But still i am getting above error: <add key="ConnectionString" value="Initial Catalog=XX;DataBase=XX;Data Source=XX;User ID=XX;pwd=xx;Min Pool Size=5;Max Pool Size=225;Connection Reset=True;Connection Lifetime=180;"></add> Please advice me.Thanks-Dil
View 1 Replies View RelatedHi, I keep getting this error. I have a query that takes 47 seconds when I run it in SQL Server 2005. My connection string looks like this:connectionString="Server=server; Database=db; Pooling = true; Connect Timeout=60; Max Pool Size=300;I understand that Connect Timeout 60 = 60 minutes. Is there any other place where a timeout can be set in an ASP.NET 2.0 application?Thanks for any ideas.
View 6 Replies View RelatedHi....i got this error,I have already set in my connection string:----
Connect Timeout=300; pooling='true'; Max Pool Size=200;but i got this error till now,how can i solve this .......thanks
When I connect remotely to SQL SERVER 2005 the following error occurs.Error: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.thanks & regards priya.
View 2 Replies View Related