Hi Everybody,
Experts........
i am using Sql server7.0
I want to Delete existing Role How Can I Delete it.
Anybody can please Tell me Immediately...
I tryied Sp_DropRole But it display's message successfully
completed but role of that name is still there...
Thanx a Lot in Advance.....(after solving this problem)
(Mohanlal)
we are using a 2012 SSAS cube with many (about 100-200) roles. We use AdoMD to programmatically create, edit and drop roles. Everything works fine until we want to drop a role (this occurs only with some of the roles). I thought this was an AdoMD problem, but I actually get the same error when I delete such role in Management Studio. I attached the full exception message. I tried to remove all members before dropping the role to no avail, there must be some other dependency.
Program Location:
at Microsoft.AnalysisServices.Server.SendBatch(ArrayList objectsToDelete, ArrayList objectToAlter)
at Microsoft.AnalysisServices.MajorObject.DropPrivate(DropOptions options, XmlaWarningCollection warnings, ImpactDetailCollection impactResult, Boolean analyzeImpactOnly)
at Microsoft.AnalysisServices.MajorObject.Drop(DropOptions options)
at Microsoft.SqlServer.Management.SqlManagerUI.DropOlapObjects.DoDropObject(Int32 objectRowIndex)
at Microsoft.SqlServer.Management.SqlManagerUI.DropObjects.DropAllObjects(Boolean stopOnError)
Question to those who may have had this same error- it seems that I am not able to delete some of the reports that I have created. This just started happening recently and according to our system admin nothing has changed as far as permissions are concernced. We installed SP2 the other day and I was wondering if this could have anything to do with the error message below
by the way I am a member of the sysadmin group
thanks in advance
km
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.DBInterface.DeleteObject(String objectName) at Microsoft.ReportingServices.Library.RSService._DeleteItem(String item) at Microsoft.ReportingServices.Library.RSService.ExecuteBatch(Guid batchId) at Microsoft.ReportingServices.WebServer.ReportingService2005.ExecuteBatch() --- End of inner exception stack trace ---
Ive been reading over the documentation and some stuff online, but I still dont really understand what the difference is and when you would use one vs the other. Can someone put it in simple terms for this dummy (me) ?
thanks
In sql server 2000, I created some custom database roles called ProjectLeader and Developer. I would make these roles a member in the fixed database roles so that I would only have to add the user to the ProjectLeader or Developer role once and they would presto-magico have the security I wanted them to have with no unecessary mouse clicking. I'm not sure how to repeat this process in 2005? Management Studio doesn't seem to allow you to add a role as a member in another role. Is there a work around or solution for this?
View 1 Replies View Related Hi all, I am trying to connect to the database using application role. But gives an error An error has occurred while establishing a connection to the
server. When connecting to SQL Server 2005, this failure may be caused by
the fact that under the default settings SQL Server does not allow remote
connections. (provider: SQL Network Interfaces, error: 26 - Error Locating
Server/Instance Specified)
for the given connection string Dim connstring
As String = "Data Source=Northwind;Initial
Catalog=OrderProcessing;Persist Security Info=True;UserID=application_login;Password=wewewe;"
Dim cmd
As SqlCommand
Dim
param As SqlParameter
Dim
cookie As Byte()
Dim cn As New
SqlConnection(connstring)
If
(cn.State = ConnectionState.Closed) Then
cn.Open()
End If Please help..
Thanking you, Nirmala
Hi,
I have SQL server 2005 (Developer edition) installed and I want to add a database role to a database role. It is working on my SQL 2000 server,however, when I tried to do the same thing on SQL2005, It didn't allowed me.
When I go to the Add role and then adding members to the role, the browse screen does not allow me the choice of object type Roles. It only shows me "Users".
Can someone please help me with this and provide me some information of how / what should I set to get the Roles in object types list so I can add a role to a role.
Thanks
I have some simple files but they are failing because the delete history task is failing as it is looking for files in a non existent directory.
It is looking for files in C:Program FilesMicrosoft SQL ServerMSSQL10_50.INSTANCEMSSQLLog whereas it should be looking in C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLLog
how I can get this corrected so I can get the Maintenance Plans to run correctly.
I have tried deleting and recreating the Plan but to no avail
I am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies View RelatedHello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
I am having great difficulty with cascading deletes, delete triggers and referential integrity.
The database is in First Normal Form.
I have some tables that are child tables with two foreign keyes to two different parent tables, for example:
Table A
/
Table B Table C
/
Table D
So if I try to turn on cascading deletes for A/B, A/C, B/D and C/D relationships, I get an error that I cannot have cascading delete because it would create multiple cascade paths. I do understand why this is happening. If I delete a row in Table A, I want it to delete child rows in Table B and table C, and then child rows in table D as well. But if I delete a row in Table C, I want it to delete child rows in Table D, and if I delete a row in Table B, I want it to also delete child rows in Table D.
SQL sees this as cyclical, because if I delete a row in table A, both table B and table C would try to delete their child rows in table D.
Ok, so I thought, no biggie, I'll just use delete triggers. So I created delete triggers that will delete child rows in table B and table C when deleting a row in table A. Then I created triggers in both Table B and Table C that would delete child rows in Table D.
When I try to delete a row in table A, B or C, I get the error "Delete Statement Conflicted with COLUMN REFERENCE". This does not make sense to me, can anyone explain? I have a trigger in place that should be deleting the child rows before it attempts to delete the parent row...isn't that the whole point of delete triggers?????
This is an example of my delete trigger:
CREATE TRIGGER [DeleteA] ON A
FOR DELETE
AS
Delete from B where MeetingID = ID;
Delete from C where MeetingID = ID;
And then Table B and C both have delete triggers to delete child rows in table D. But it never gets to that point, none of the triggers execute because the above error happens first.
So if I then go into the relationships, and deselect the option for "Enforce relationship for INSERTs and UPDATEs" these triggers all work just fine. Only problem is that now I have no referential integrity and I can simply create unrestrained child rows that do not reference actual foreign keys in the parent table.
So the question is, how do I maintain referential integrity and also have the database delete child rows, keeping in mind that the cascading deletes will not work because of the multiple cascade paths (which are certainly required).
Hope this makes sense...
Thanks,
Josh
I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
this is my Delete Query NO 1
alter table ZT_Master disable trigger All
Delete ZT_Master WHERE TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
alter table ZT_Master enable trigger All
I have troble in Delete Query No 2
here is a select statemnt , I need to delete them
select d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
I tried modified it as below
delete d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
but this doesn't works..
can you please help?
and can I combine these 2 SQL Query into one Sql Query? thank you
I'm using SqlDataSource and an Access database. Let's say I got two tables:user: userID, usernamemessage: userID, messagetextLet's say a user can register on my website, and leave several messages there. I have an admin page where I can select a user and delete all of his messages just by clicking one button.What would be the best (and easiest) way to make this?Here's my suggestion:I have made a "delete query" (with userID as parameter) in MS Access. It deletes all messages of a user when I type in the userID and click ok.Would it be possible to do this on my ASP.net page? If yes, what would the script look like?(yes, it is a newbie question)
View 2 Replies View RelatedThe requirement is: I should allow single row delete from a table but not bulk delete. An audit table should get updated if there is any single delete or single update. So I wrote the triggers as follows: for single and bulk delete
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
[code]...
When I try to run the website, the database error I am getting is:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
I ran the following query in Query Analyzer on a machine running SQL Server 2000. I'm attempting to delete from a linked server running SQL Server 2005:
DELETE FROM sql2005.production.dbo.products
WHERE vendor='Foo'
AND productId NOT IN
(
SELECT productId FROM sql2000.staging.dbo.fooProductList
)
The status message (and @@ROWCOUNT) told me 8 rows were affected, but nothing was actually deleted; when I ran a SELECT with the same criteria as the DELETE, all 8 rows are still there. So, once more I tried the DELETE command. This time it told me 7 rows were affected; when I ran the SELECT again, 5 of the rows were still there. Finally, after running this exact same DELETE query 5 times, I was able to remove all 8 rows. Each time it would tell me that a different number of rows had been deleted, and in no case was that number accurate.
I've never seen anything like this before. Neither of the tables involved were undergoing any other changes. There's no replication going on, or anything else that should introduce any delays. And I run queries like this all day, involving every thinkable combination of 2000 and 2005 servers, that don't give me any trouble.
Does anyone have suggestions on what might cause this sort of behavior?
Hi,
I have a problem with one report on my server. A user has requested that I exclude him from receiving a timed email subscription to several reports. I was able to amend all the subscriptions except one. When I try to remove his email address from the subscription I receive this error:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Online no help couldn't offer any advice at all, so I thought I'd just delete the subscription and recreate it again, but I receive the same message. "Okay, no problem, I'll just delete the report and redeploy it and set up the subscription so all the other users aren't affected", says I. "Oh, no!", says the report server, and then it give me this message:
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.DBInterface.DeleteObject(String objectName) at Microsoft.ReportingServices.Library.RSService._DeleteItem(String item) at Microsoft.ReportingServices.Library.RSService.ExecuteBatch(Guid batchId) at Microsoft.ReportingServices.WebServer.ReportingService2005.ExecuteBatch() --- End of inner exception stack trace ---
What's even weirder is that I'm the owner and creator of the report and I'm a system admin and content manager on the report server and I set up the subscription when the report was initially deployed. Surely I should have sufficient rights to fart around with this subscription/report as I see fit?
I have rebooted the server, redeployed the report, checked credentials on the data source and tried amending and deleting from both the report manager and management studio but still I am prevented from doing so.
Any help would be much appreciated.
Thanks in advance,
Paul
First, this is not my code.
This one is weird and I am missing something fundamental on this one. A developer was getting a timeout with this...
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE FROM INVOICECLAIMMAPPING WHERE CLMRECDID IN (SELECT DISTINCT CLMRECDID FROM CLAIMSRECEIVED WHERE SUBMITTERTRANID = @SUBMITTERTRANID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsreceivedPayorServices where ClmRecdPyID in (SELECT ClmRecdPyID
FROM ClaimsReceivedPayors
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedPayors WHERE ClmRecdid in (SELECT ClmRecdID
FROM ClaimsReceived
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
I applied a couple of indices and got ride of the uncorrelated subqueries
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE INVOICECLAIMMAPPING
FROM INVOICECLAIMMAPPING
JOIN CLAIMSRECEIVED
ON INVOICECLAIMMAPPING.CLMRECDID = CLAIMSRECEIVED.CLMRECDID
WHERE CLAIMSRECEIVED.SUBMITTERTRANID = @SUBMITTERTRANID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment
WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsreceivedPayorServices
FROM ClaimsreceivedPayorServices
JOIN ClaimsReceivedPayors
ON ClaimsreceivedPayorServices.ClmRecdPyID = ClaimsReceivedPayors.ClmRecPyID
WHERE ClaimsReceivedPayors.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsReceivedPayors
FROM ClaimsReceivedPayors
JOIN ClaimsReceived
ON ClaimsReceivedPayors.ClmRecdid = ClaimsReceived.ClmRecdid
WHERE ClaimsReceived.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Suddenly this constraint was being violated with the change
ALTER TABLE [dbo].[ClaimsReceivedPayorServices] ADD CONSTRAINT [FK_ClaimsReceivedPayorServices_CLAIMSRECEIVEDPAYOR S] FOREIGN KEY
(
[ClmRecdPyID]
) REFERENCES [CLAIMSRECEIVEDPAYORS] (
[CLMRECPYID]
)
Is the delete on ClaimsReceivedPayors starting before the delete on ClaimsreceivedPayorServices finishes? If so why would it matter between the join and subquery? This one is making me depressed because I can not explain it.
Hi all
Need some advice solving a little problem I have with my database!
Current setup:
I have a person table that is made up of 39 columns. I also allow for person records to be deleted but I do this by having another table I call LogicallyDeletedrecords. This table is made up of the PersonId, Reason for deletion/suppression and a date time stamp. To access Live records I created a view based on my Person table which contains a WHERE clause to exclude records that exist in the LogicallyDeletedrecords. Similarly, I have another view DeadPersonData which contains Person records that have been removed. Hope it all makes sense so far! Now on to my worries!
The problem:
My Person table contains 9+ million records. The LogicallyDeletedrecords table has 500k+ but I anticipate further growth over the coming weeks/months. My worry is that my LivePersonData view will be too slow to access as my LogicallyDeletedrecords table grows. What’s more, as part of my Load routine, I have to make sure that Person data loaded on to the system is excluded if that same person exists as a deleted member. Both of these actions could slow down my system as the deleted table grows.
My thoughts:
I’ve been thinking of physically deleting dead Person records from my person table (possibly creating an archive table to hold them). But then if I delete them how do I cross check the details when new Person details get loaded?! As I said, my current LogicallyDeletedrecords table holds the PersonId, ReasonDeleted and CreationStamp. The only way is to add further columns which I use to match Person Details?
Any design suggestions would be welcome!
I am trying to write one sql statement that deletes from two tables. Is it possible ? If yes, any thoughts ?
View 5 Replies View RelatedHi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
Hi , I'm looking for a way that SQL-S7 tells me, what db-role I have.
I want to avoid that the server generates an error message when I'm not
authorized to access an information. So I could give the users only that
information they are authorized for.
May be there is a stored procedure or a template ?
Or is there an other way for controlled checking whether I have the rights
or not ?
Thanks for help
When I assign a role to a user, the user is not actually getting the permissions defined in the role. I am forced to give the permissions directly to the user..any idea why it's ignoring the role which is assigned?
Thanks.
I have set up all new Roles assigned different views, table access to each user i set up.
Whilst setting this up - i could do script to generate the script.
Is there a way to get this script after the effect - some roles i forgot to generate script.
I know im being lazy - i could write the entire script out but thought maybe there a way to get this .
Thanks
Hello:
I have read that giving a User the DB_DDLAdmin role in SQL might causes problems with ownership chains in the future. Since the User will have ownership to all objects created, what preventive measures can one take to help avoid any problems which might loom in the distant future due to ownership chains?
Thank you,
-H
I am new at this and we encountered a problem. Can names in the public role be deleted? We have some names that need to go - however the delete option does not high light?
I would appreciate your help..
Hi everybody,
The below I posted on SQL 2000 Forum about a week ago.
Any new thoughts................
I would like to get an input from as many people as possible on the following:
In our organization DBA is responsible for 5 servers ( currently NT 4/SQL 7)and is a part of group of a 5 people including manager and 3 developers.
DBA currently has a FULL access to every server.
In a few months we will be replacing the existing system with Windows 2000/SQL 2000.
LAN group will give to DBA only a read rights for the Windows 2000 environment, saying that the AUDITORS, both internal and external, require that. In other words, if DBA needs to run a command prompt, move files from one directory to another in Production environment, he has to fill the request to LAN, so LAN group would do that.
So I guess the main question(s) is:
What is the degree of involmment of DBA with Operating system?
Is DBA suppose to be an NT administrator ( I dont think so, since DBA has a lot of other thing to do?
If DBA accidently makes an unwanted changes to the Operating System, who should be blamed for ( not personally, but in more general terms) and would it be an extra argument to take write rights away from a DBA?
What auditors saying about that?
Thanks a lot in advance,
Andrei
Hi Everybody,
The end users are using VB Applications, there they will be entering datas. Those datas will be stored in the SMS Database.
My Problem is through which Roles (Fixed Server Roles or Database Roles) I should attach these end users. If it is a Fixed Server Roles, Other than sysadmin role in which role I should attach this end user. Like that other than DB_Owner in which role I should attach these end users to the Database Roles.
Can anyone guide me please.
thanks,
Srinivasan.
Hi!
What server role should be assign for individual to create and execute DTS packages.
Thank you,
Elena.
Hi All,
Question:
Why would the user other than sa need the db_owner rights?
Hi everybody,
I would like to get an input from as many people as possible on the following:
In our organization DBA is responsible for 5 servers ( currently NT 4/SQL 7)and is a part of group of a 5 people including manager and 3 developers.
DBA currently has a FULL access to every server.
In a few months we will be replacing the existing system with Windows 2000/SQL 2000.
LAN group will give to DBA only a read rights for the Windows 2000 environment, saying that the AUDITORS, both internal and external, require that. In other words, if DBA needs to run a command prompt, move files from one directory to another in Production environment, he has to fill the request to LAN, so LAN group would do that.
So I guess the main question(s) is:
What is the degree of involmment of DBA with Operating system?
Is DBA suppose to be an NT administrator ( I dont think so, since DBA has a lot of other thing to do?
If DBA accidently makes an unwanted changes to the Operating System, who should be blamed for ( not personally, but in more general terms) and would it be an extra argument to take write rights away from a DBA?
What auditors saying about that?
Thanks a lot in advance,
Andrei
I am confused . What is considered an application and how SQL would know ?
If I have a web site accessing SQL VIA IIS will SQL Server treat it as an application ? How about MS Excel ?
Also , If I was to use the application of Power builder , using app role , how do control which user can use the app ?
Thanks
I'm trying to allow my developers the ability to modify/execute their jobs and dts packages in production....without giving away the security farm so to speak.
Is the processadmin role a possibility?
BOL and the net only seems to say this role allows user to "manage process"...duh.
Your thoughts and advice would be great appreciated.