Hi,
I'm writing a php program and I would like to know how I could encrypt only the connection string (if that€™s possible) to connect to a database (SQL Server 2005 Express Edition).
Web Server -----> connection string (Ciphertext) -----> SQL Server 2005
Thanks in advance€¦.
Hi,
I have connectionstring inside my script component, but I want to encrypt/hide it... how do i do that in ssis?
Dim cn As SqlConnection
Dim SQLCmd As SqlCommand
Dim dr As SqlDataReader
cn = New SqlConnection("Server=localhost;user=sa;pwd=test;database=test")
cherriesh
SQL Server 2000:################################################## ######I run the following as a normal query from Analyzer:################################################## ######SELECT encrypt(user_password) FROM emp WHERE user_id = 1################################################## #######I run the following query from inside a stored proc:################################################## #######SELECT encrypt(user_password) FROM emp WHERE user_id = 1################################################## #######Question????################################################## #######If the data inside the emp table does not change, how can these twoqueries return different values?Any help would be much appreciated!thanks,Russ
View 3 Replies View RelatedI have been trying to create a certificate for use with SQL2005. I found openSSL to create a cert but I am not sure how to use it.
When I go into SQL Config Manager / Protocol Properties / Certificate Tab... I do not see any certificates. The list is empty. Where are these certs pulled from and how can I create one on my own?
Here are the Reqs:
Certificate Requirements
For SQL Server 2005 to load a SSL certificate, the certificate must meet the following conditions:
The certificate must be in either the local computer certificate store or the current user certificate store.
The current system time must be after the Valid from property of the certificate and before the Valid to property of the certificate.
The certificate must be meant for server authentication. This requires the Enhanced Key Usage property of the certificate to specify Server Authentication (1.3.6.1.5.5.7.3.1).
The certificate must be created by using the KeySpec option of AT_KEYEXCHANGE. Usually, the certificate's key usage property (KEY_USAGE) will also include key encipherment (CERT_KEY_ENCIPHERMENT_KEY_USAGE).
The Subject property of the certificate must indicate that the common name (CN) is the same as the host name or fully qualified domain name (FQDN) of the server computer. If SQL Server is running on a failover cluster, the common name must match the host name or FQDN of the virtual server and the certificates must be provisioned on all nodes in the failover cluster.
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
Hi,
I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" />
<membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership>
But when I try to login to the site using the login control the following error occurs:
Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager>
Line 150: <providers>
Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213
It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! .
I'm lost and I dunno what to do, can anyone help?
Here is the mahine.config in case if you need it:<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings>
<system.data><DbProviderFactories>
<add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories>
</system.data><system.web>
<processModel autoConfig="true" /><httpHandlers />
<membership><providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers>
</membership><profile>
<providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></profile>
<roleManager><providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></roleManager>
</system.web>
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>'
My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
I have been trying to host my website on Go Daddy for about 3 weeks and I have cleared several problems but this one remains. I can get into the ASPNETDB database for doing logins , etc but I cant access my database called "PINEmgt".
To try to understand where the problem is located,I built a very simple application without login controls and put on it one Detailform accessing a single line table "Signin". I continually get the error message I got with my real app :"The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty. " There is only one connection string in my app -'PINEMgtConnectionString2'. When I run the app locally on my machine it works. After I move everything to Go Daddy, I get the error message and the following dump"
Line 24: </Fields>
Line 25: </aspetailsView>
Line 26: <aspqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStringsINEMgtConnectionString2 %>"
Line 27: InsertCommand="INSERT INTO Signup(first_name, last_name, email, customer_id) VALUES (,,,)"
Line 28: SelectCommand="SELECT * FROM [Signup]"></aspqlDataSource>
This is indeed the code from my single page app.
The dump is:
[InvalidOperationException: The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty.]
System.Web.Compilation.ConnectionStringsExpressionBuilder.GetConnectionString(String connectionStringName) +3039085
ASP.default_aspx.__BuildControlSqlDataSource1() in d:hostinguck7scoutDefault.aspx:26
ASP.default_aspx.__BuildControlform1() in d:hostinguck7scoutDefault.aspx:10
ASP.default_aspx.__BuildControlTree(default_aspx __ctrl) in d:hostinguck7scoutDefault.aspx:1
ASP.default_aspx.FrameworkInitialize() in d:hostinguck7scoutDefault.aspx.vb:912306
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +40
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) +29
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
After Googleing, asking Go Daddy for info (which they dont give) , etc for three weeks, I need serious mental help
in the form of a solution of this problem. Your help with the problem or the name of a good mental health professional in eastern N.C. (maybe both) would be appreciated.
I have seen another thread with this same problem, but the problem seemed to be a typo. I am getting an error when I try to access the web site ..
The connection name 'USASH-AS0013' was not found in the applications configuration or the connection string is empty.
However, in my web.config file I do have a connection named USASH-AS0013. Here is my web.config file (with my user/pwd hidden). Any help would be greatly appreciated.
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<appSettings/>
<connectionStrings>
<add name="USASH-AS0013" connectionString="Provider=SQLOLEDB;Data Source=USASH-AS0013;User ID=****;Password=*****;Initial Catalog="Smart Factory""
providerName="System.Data.OleDb" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<compilation debug="true" strict="false" explicit="true"/>
<pages theme="MySkin" >
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
I have a child package where the ConnectionString property of a Connection Manager is set by a Parent Package Variable Configuration. I set up a script task that brings up a message box with the value of the ConnectionString property right before the dataflow task.
MessageBox.Show(Dts.Connections["CPU_*"].ConnectionString.ToString());When I run the parent package, the message box shows that the connection string is changing with every iteration, but in the dataflow it always draws the data from the same source.
The connection manager is an ADO.Net type, RetainSameConnection is set to False, and I've been researching this for days.
(Update 2/23/2015): To make this stranger, when I look at the diagnostic logs, they tell me that when the new connections are being opened they are using the new connection strings.
I came across something strange today. I was wondering I was doing something wrong.
View 7 Replies View RelatedThis is the first time I have used SSIS, so please bear with the ignorance.
I have a super simple package that inserts x000's of rows into a temporary table. The data source is a file that the user will upload. I need to be able to tell the package what file to upload. I'm thinking the simplest thing would be to edit the connectionString property of the SourceConnectionFlatFile at runtime. Is this possible? What form should the file path be in (UNC, other)? And, are there any other considerations I should be aware of?
Thanks!
Good Morning,
I hope that I am just missing a step in the process somewhere. I have established a string variable called DatabaseServer and another called DatabaseName. In the OLE DB connectionstring expression I have the following:
Code Snippet
"Data Source=" + @[User::DatabaseServer] + ";Initial Catalog=" + @[User::DatabaseName] + ";Provider=SQLNCLI.1;Integrated Security=SSPI;Auto Translate=False;"
My understanding is that changing the variable from SERVERA to SERVERB should repoint the connection. (Test to pre-production to production in my current promotion environment.) This should also take effect in any dataflow task using the database connection above right? When I try to repoint the server variable (and only the server variable) I am either a.)throwing errors saying the original connection cannot be found in the data flow task, or b.)the job appears to be processing fine, but the repoint did not take place and data is still flowing to the original server.
Can anyone offer suggestions as to what I am missing?
The properties values in the DB connection:
ConnectionManagerType is OLEDB
DataSourceID is blank
DelayValidation is False (Setting to true changes nothing in my test)
Expression for ConnectionString is (see above)
RetainSameConnection is False
SupportsDTCTTransactions is True (and appears to be unchangeable.)
Hi,
I need your help!!!!!!!!!!
Ii'm running the application using the sql SDK version , i'm having trouble openning the connection. my connection string is:
strConnect="data source=DEFAULT_WINXP\VSDOTNET;initial catalog=try1;integrated security=SSPI;persist security info=True;workstation id=DEFAULT_WINXP;packet size=4096";
and i get an exception: Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'DEFAULT_WINXPASPNET'.
this is my code:
string strConnect;
SqlConnection objConnect;
SqlCommand objCommand;
SqlDataAdapter objDatatAdapter;
DataSet objDataSet;
strConnect="data source=DEFAULT_WINXP\VSDOTNET;initial catalog=try1;integrated security=SSPI;persist security info=True;workstation id=DEFAULT_WINXP;packet size=4096";
objConnect = new SqlConnection(strConnect);
objCommand=new SqlCommand();
objDatatAdapter = new SqlDataAdapter();
objDataSet=new DataSet();
objConnect.Open();
objCommand.Connection = objConnect;
objCommand.CommandType = CommandType.Text;
objDatatAdapter.SelectCommand = objCommand;
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'DEFAULT_WINXPASPNET'.Source Error:
Line 166:objDatatAdapter = new SqlDataAdapter();
Line 167:objDataSet=new DataSet();
Line 168:objConnect.Open();
Line 169:objCommand.Connection = objConnect;
Line 170:objCommand
Hi
I'm using VB.NET in ASP.NET .
Windows 2000
Visual Studio 2005
and SQLServer 2005.
I'm new to VS 2005
I'm using the following code for connection
<add key="dsnstring" value="persist Security info=False; User ID=; password=;Initial Catalog=TransMate1; Data Source=Localhost trusted_connection=yes" />
it is giving the error as 'Cann't do the connection since user id cann't be null
It is not exact words of the error message.
following code is working fine with the SQL Server 2003 but not with SQL Server 2005.
<add key="dsnstring" value="persist Security info=False; User ID=sa; password=dreams;Initial Catalog=TransMate; Data Source=Localhost" />
Kindly help me
Thanks in advance
Regards.
I have made an app (the first one) and im trying to find the right connection string to the database. Im using sqlexpress on my local computer, and my host uses MSSQL, can anyone tell me what the connection string could
View 1 Replies View Relatedany1 know how to find/create a connection string to an SQL database ????
View 3 Replies View RelatedI want's to use following connection string
"dsn=MyDsn;uid=MyUser;pwd=MyPassword"
Can some how I use it with sqlconnection
I want's to get rid of odbconnection e.t.c
What will be the connection string for sql provider for above dsn information.
If anybody can explain the please help me ?
my web site is in a host. my mssql db is in other host. how I write the connection string. Please help.
View 6 Replies View RelatedAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
ive got this error and i think its about connection string, help please, can somebody show me how to fix this, obviously im a newbie and this my first time to use .net. thanks!
hi, i was just wondering what's wrong with my code. i have class library to handle all the classes of my asp.net project. when im compiling a class, i am getting an error "Error 1 The name 'ConfigurationManager' does not exist in the current context " . i have this code for that error message: string connStr = ConfigurationManager.ConnectionStrings["ConnString"].ConnectionString; im not sure about this because im new in asp.net. am i missing a reference here?if yes, what namespace should i include? by the way, i tested this directly in my asp.net age and it is working fine. when i use visual c#.net, that's where the error prompts me, and i cant build that class library.
View 2 Replies View Relatedhi,
ok im not sure if this is in the right forum, so sorry if its not.
basicly,
before i optained a licence for SQL Server 2005 Dev i was using SQL Server 2005 Express.
now in IIS iv found the following entery in Connect Strings
data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true
basicly, what i want to know is do i need this entery, and if so, do i need to edit it?
thanks
I am using Dreamweaver 8 on Windows XP. I am trying to connect to SQL Server 2005. My connection string isn't right. I ran the OBDC test and it works so I know its the connection string. My webpages give me the error that the server does not exist or access denied. When I use anything else like SQLNCLI.1 for the provider it gives me the error that the provider is not found. What should the connection string consist of and what should I use for Provider?
MYCONN_Conn ="Provider= SQLOLEDB;Data Source=sql2005.loc.mss.edu;Integrated Security=SSPI;Initial Catalog=OPENAssessment;"
Thanks in advance.
Can VWD generate it by itself? I have a MDF file and I need to get the connection string.
View 3 Replies View RelatedHi , I've been searching for this answer for a few hours now but unfortunately I still can not sort it.
I'm attempting to make a "Database Driven Hierarchical Menu" from this tutorial http://aspalliance.com/822
It explains in the tutorial that you must change the connection string to point to your database and add user name and password. (i dont have a user name or password for my local server, or atleast I dont think I do!)
Below is my connection string:DataSet ds = new DataSet();
string connStr = "server=localhost;Trusted_Connection=true;database=Product.mdf";using (SqlConnection conn = new SqlConnection(connStr))
{string sql = "Select MenuID, Text, Description, ParentID from Menu";SqlDataAdapter da = new SqlDataAdapter(sql, conn);
da.Fill(ds);
da.Dispose();
Every time I try to run the page I get this error.
Cannot open database requested in login 'Product.mdf'. Login fails.Login failed for user '*****'
Can anyone see where I'm going wrong? I'm quite new to all this so I apologies if this seems a bit stupid.
Many Thanks
I have the following code:
' Dim connStr As String = System.Configuration.ConfigurationManager.AppSettings("AppDoc")
Rather than use the AppSettings within Configuration Manager, I just want to use the connection string. I've seen examples of this in CS but none in VB. Can someone point me in the right direction?
I thought it would be something like this but it doesn't work:
Dim connStr As SqlDataSource = New SqlDataSource(ConfigurationManager.ConnectionStrings["AppDoc"].ConnectionStrings)
Hi ,I m using this Connection string Data Source=Dev30/SQLExpress;Server=Dev30;Initial Catalog=Fran;Integrated Security=sspi; i get an error An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections i set the Surface area connection to TCP/IP browser satred..!! Still get this error !!Regards,Francis P.
View 2 Replies View Relatedhere is sample conenction string i want o use for my web site
<add name="myconstr" connectionString="data source=//SQLEXPRESS; AttachDbFilename="data est.mdf";Trusted_connection=yes; uid="username"; pwd="password"; Integrated security=true;Connect Timeout=30;User Instance=True"
providerName="System.data.sqlclient" />
now i am getting this error
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
please tell is my connection string wrong?
i have sahred hosting they say its coding problem.
and i guess
its may be becasue
datasource as SQLEXPRESS
Please help me where I am wrong?
username and passowrd its the one provided by them
data folder i have created under wwwroot
wwwroot s my websites root folder
please help at your earliest as i am new and have no other source of help.
Could someone help me with my connection string and how I should create it?
I have a Windows 2003 server running MS Sql 2005. This is a separate server, meaning I'm developing my ASPX code on my laptop and FTP the code over to the server. I'm not sure how to write my connection string. Should My current connection string point to my locally hosted DB. Now that I have my own server should I replace my current 'localhost' entry with the server's IP address? Do I need to create a DNS on the server? Sorry, I'm very new to all this and I'm lost. Any help would be greatly appricated.
hi all...i need the code for providing connection string in visual J#....am declaring the connection string globally in webconfig file using the key 'SqlCon' am integrate the connection in all my pages..in C# am using like this string Strconnection1 = System.Configuration.ConfigurationSettings.AppSettings["SqlCon"]; SqlConnection Sql_con1 = new SqlConnection(Strconnection1); Sql_con1.Open(); but in J# i dont know how to implement the connection....if anybody have an idea let me know quickly....thanks in advance....
View 2 Replies View RelatedHello all,
Please help me as i am not able to connect to my database
i have my databse in datab directory
and this is my connection string
<add name="Connstrmy" connectionString="my server ; AttachDbFilename="datadirectory est.mdf";uid=username; pwd=passowrd;"
providerName="System.Data.SqlClient" />
hosting people have said that you are using uid and password for databse and not of server
i have to add user id and password for server also
how do i do that?
is user id=uid
pwd=password?
please help me
hello all
i use (RDB Relational Data Base)
and i need the correct connection string to use it in my asp project Page_load
i dont want to us dsn to connect to my database
this is my DSN info
how can I use server.mappath in an aspx page inside a sqldatasource tag
ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & Server.MapPath("users.mdb")
this works in aspx.vb page but not works in the aspx page
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & Server.MapPath("users.mdb") this line causes error
ProviderName="System.Data.OleDb" SelectCommand="SELECT * FROM [track]">
</asp:SqlDataSource>