Hi
i'm a newbie reporting services developer (first experience) and i have this problem that i'm trying to explain you by steps:
1 i link the report to a stored procedure to know if a user is enabled to watch or not the results table
2 if the user not enable to watch i'll write on the report "user not enable..." and so i hide the result table
...is it possible to do this?
Thanks in advance for any information
I have a handful of reports that are currently used by sales reps, and I'm trying to make them available to their regional VP's, and coporate users (executives and administrative staff that support Sales nationwide).
Currently, the reports take the UserID and resolve it to show the information that is only appropriate for that specific rep.
What I would like to do is have the parameter section at the top of the report be displayed for higher level users, so they could select an individual sales rep from a drop-down. (Ideally, the RVP's would only be able to select from reps in their region, but the corporate users would be able to select any rep.) The problem is, I don't want any of the sales reps to be able to select a rep other than themselves, for obvious reasons.
Is there a way to have the parameter section hidden/displayed dynamically, based on the UserID, so that users other than reps would have the ability to enter the desired rep name, but reps would not?
How would I hide certain parameter controls based on user sections in certain controls dynamically at runtime. I am using RS 2003 edition.
View 5 Replies View Related
Hello All,
I have a reporting services report in the form of a chart. I have two datafields on the chart.
I need to be able to dynamically hide one datafield and view the chart for the other one and vice versa.
How do I do this ?
Any help would be appreciated..
Thanks!
Hi,
How can I hide all the system tables so that only user tables show in table view.
Thank you very much!
John
hi, i have a table that returns all rows. But i need to hide the rows having the "Order"= false.But i don't wanna do it by querying in the dataset, i just wanna hide these rows."Order" is a column in my table. Does anyone know how this can be done?
Thank you
Hello Does any one tell me how to hide a table of the SqlReporting tool if there is no record found in the DB?
ThanksJitendra
Help,
I am trying to create a csv file without the field header information. First, I hid the table header row, then each column header separately, then removed the table header alltogether, but when I print to a CSV file the field headers still show up. This file is going to be use as input to another application and they do not want the header information.
What I get now:
OrderNo,OrderDate,OrderAmt
1,3/1/08, 25.00
2,3/1/08,25.00
3,3/1/08,25.00
4,3/1/08,25.00
What I want:
1,3/1/08, 25.00
2,3/1/08,25.00
3,3/1/08,25.00
4,3/1/08,25.00
Thanks for any help,
Fred
I want to hide a row n all pages except the first page , is there a way for doing this,
The haeder has totally 5 rows, But i want to hide only the 4th row, that too I want it in the first page and not the rest of the pages
I need an SQL statement that will hide a field in a column without removing it from the table.
View 3 Replies View RelatedI am using Reporting Services 2000. If you find out that Reporting Services 2005 would resolve this issue, please lemme know also. But I want to mention that I would prefer a way to fix this without changing Reporting Services versions.
I have a table that has a group on ProductTypes. This group is set to PageBreak at end.
What I need to do is to conditionally hide an entire column based on the current group's ProductType.
Examples
Page 1 = Product 1 = Column 1 is visible
Page 1 = Product 1 = Column 2 is visible
Page 2 = Product 2 = Column 1 is hidden
Page 2 = Product 2 = Column 1 is visible
Can you help me figure this one out ? I've tried everything I found on the net, especially everything on this page : http://blogs.msdn.com/chrishays/rss.xml
Thank you in advance.
I’ve got a situation where the columns in a table we’re grabbing from a source database keep changing as we need more information from that database. As new columns are added to the source table, I would like to dynamically look for those new columns and add them to our local database’s schema if new ones exist. We’re dropping and creating our target db table each time right now based on a pre-defined known schema, but what we really want is to drop and recreate it based on a dynamic schema, and then import all of the records from the source table to ours.It looks like a starting point might be EXEC sp_columns_rowset 'tablename' and then creating some kind of dynamic SQL statement based on that. However, I'm hoping someone might have a resource that already handles this that they might be able to steer me towards.Sincerely,
Bryan Ax
I'm using Outlook 2010
My goal: I want to hide some text or table from inside the email message body. I don't want to attach a file with a table neither I want copy/paste it. I'd like to put that Excel table inside the message but the table is quite big.
Before I used Lotus Notes and it had the option to fold of hide some text from user. User could open when it wants but it will not take the space.
I'd like to hide/show a table based on selected parameters. In the current setup I have a matrix and two tables underneath that need to be displayed from time to time. First of I use a multi-value parameter called "Lieferart". Depending on the parameter I have set the visibility of the two tables with the following expression:
=iif(Parameters!lieferart.Value(0) like "Nagel%", False, True)
This expression doesn't work though, any ideas??? I am also unsure about what I have to do If multiple values from the parameter list are selected as Parameters!lieferart.value(0) doesn't necessarily need to have a label like "Nagel" included...
When I hide a table based on an expression it leaves a blank space. How do you get rid of the blank space?
View 7 Replies View Relatedwe have a table in our ERP database and we copy data from this table into another "stage"Â table on a nightly basis. is there a way to dynamically alter the schema of the stage table when the source table's structure is changed? in other words, if a new column is added to the source table, i would like to add the column to the stage table during the nightly refresh.
View 4 Replies View RelatedI have a function that returns a table from a comma-delimited string.
I want to take this a step further and create a function that will return a set of tablenames in a table based on a 'group' parameter which is a simple integer...1->9, etc.Obviously, what I am doing is not working out.
CREATE FUNCTION dbo.fnReturnTablesForGroup
(
@whichgroup int
)
RETURNS @RETTAB TABLE (
TABLENAME VARCHAR(50)
[code]....
Hello all:
Is it possible to creates fields of the table dynamically?. I have this situation in my project. This is just a small sample. I have row of length 140. I don't wan't to declare all this fields manually using the create table command.
The description of table is as, in this table all the field are of type varchar only, there are like 140 columns.
create dummy emp (
field1 VARCHAR(100), field2 varchar(200), field3 VARCHAR(100).... )
Table: Dummy
================================================== ==
field1 field2 field3..........
Empid Empname empaage1 sam 23...........
2 rai 22............
.
.
.
n raj 45.............
================================================== ==
Now I want to create another table as "EMP" , with proper data type
fields too..
create table emp (
empid int, empname varchar(100), empage int....)
The table should look like as:
Table: EMP
================================================== ==
Empid Empname empaage............
1 sam 23...............
2 rai 22................
.
.
.
n raj 45.................
================================================== ==
I want to do this dynamically.....
Some how I need to extract those field from table[dummy]; the first row acts as a column header for the table[Emp] and the subsequent row acts as a record for the table[Emp]
A small rough snippet of the code will be appreciated....
Waiting for replies........
saby
Hi,I have 30 Table with same structure but it will accept different value at RunTime according to AirCraftType. I wand to create a stored prosedure that will accept TableName, FlightDate, FlightNo. whenever i wnat to execute this code in the database I received error :Must declare the variable '@TableName'create proc InsertDataForAirBus330 @FlightNo varchar(5),@TableName varchr(5),@FlightDate datetime
as
insert into @TableName values(@JourneyDate,@FlightNo,18,42,280,3,7,35)plz suggest me how to solve this pboblem...Jasim...
How do I dynamically pivot a table? On my example below, the STORE changes.
View 2 Replies View RelatedHi,
I have N1 table where columns name(id,Field). Base on the fields of this table I want to create N2 table from SP where data from N1 will be columns in N2.
id Field
-- ------
1 ID
2 First
3 Last
Create table N2(ID,First,Last)
regards,
Mark
Greetings all,
I want to be able to generate a table on the fly. I know I can use dynamic sql to do this but my brains have forzen this afternoon so any help would be much appreciated.
I have the first query that returns one column with three rows. The contents of the these three rows will form the new columns in the dynamically generated table. How can I do this?
Thanks.
Hi,
I want to load data from one database (from all tables) to another database. For this I am using €˜Foreach loop€˜(with SMO enumerator), I can get table name for specific database into variable successfully but now I want to load data from that table, for this I am using data flow task. In data flow task I have added €˜OLE DB Source€™ with data access mode €˜Table name or view name variable€™ and set variable but it gives me an error when loading data from 2nd table due to change in schema.
How to set table name dynamically in €˜OLE DB source€™?
Thanks in advance J
Omkar.
Hello,
I have to design a DTS package (not SSIS ) in which i want to select the destination table dynamically. Can any one help me out.
Thanks
MV
I'm trying to create a procedure that can access a column in a table dynamically.<br>
Lets say I have the following table<br>
create table table_items<br>
(rec int identity not null,<br>
item1 int,<br>
item2 int,<br>
item3 int)<br>
and I have a procedure as such
create procedure access_item<br>
@rec int,<br>
@itemindex int,<br>
@item int as<br>
select @item = (select item1 from table_items where rec = @rec)<br>
However, the column I want to access is @itemindex.<br>
If @itemindex = 1, then set @item to item1<br>
if @itemindex = 2, then set @item to item2<br>
if @itemindex = 3, then set @item to item3<br>
I can't use a simple 'if/then' selection, because the number of columns in the table can grow, and I don't want to have to rewrite the procedure everytime a column is added.<br>
How do I do this?<br>
I tried to use an execute command, as such<br>
create procedure access_item_2<br>
@rec int,<br>
@itemindex int,<br>
@item int as<br>
declare @sql varchar(255)<br>
select @sql = "select @item = (select item" + convert(varchar(2), itemindex) + " from table_items where rec = @rec)"<br>
execute (@sql)<br>
but when the procedure runs, I get the following error:<br>
'@item is not a valid variable.'<br>
What else can I do?<br>
Please e-mail me at sam@microcsl
I am having SP which gives, two result sets. The columns which are coming from result sets are also dynamic.
i.e. some time 5 columns and some time 10 columns.
Now I want to load this output into 2 different tables on daily basis. This would be truncate/delete table and load again.
Now my problem is that as I am not sure about columns, Is it possible to create table(Physical Table) depends on output of SP, and after load data into it.
During each load we can drop table, No issue and we can handle this through SSIS Package.
Hi there,
I want to create an SQL Function that checks if a table exists and returns true or false. I will pass this function a paramter (say @COMPANYID) e.g.
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[tblmyTableName_' + @COMPANYID) and OBJECTPROPERTY(id, N'IsUserTable') = 1)
how would I write this so the query is dynamically executed and I can get a value of true or false back?
Hi,
There is a table exists in a database, I have to write a stored procedure to create the same table in different database, with the same column name and field. This should be done in runtime. Is it possible. The table will be passed as a parameter to the stored procedure.
I need to write a stored procedure to verify that a table exists andalso that the user executing the stored procedure has access to thespecified table.Any user can call this publicly available procedure and pass a databasename, an owner name and a table name as parameters. The procedurereturns success if the table exists and the user has access to it, orfails if he doesn't. Here's a simplified version of what I have, butI'm wondering if there's a better way. Thanks.create procedure dumb asbegindeclare @myError int,@mytable varchar(128),@myquery varchar(128)select @mytable = '[Northwind].[dbo].[sysobjects2]'select @myquery = 'DECLARE @x int SELECT @x = count(1) from ' +@mytable + ' where 1 = 2'exec (@myquery)select @myError = @@ERRORif @myError != 0BEGINRAISERROR ('ERROR: The specified table %s cannot be accessed.', 10, 1,@mytable)RETURN 1endendgo
View 10 Replies View RelatedHi,
how to dynamically create columns for a table
Hi all,
Is there a way to change the dataset being used by a table dynamically ?
Regards,
Neil
Can you dynamically set the name of the table in the SelectCommand section of the SqlDataSource? (If it is relevant, I code in C#)
For example,
<asp:SqlDataSource runat="server" ID="SqlDataSource1" ConnectionString="<%$ ConnectionStrings:Test-MySQL %>" ProviderName="<%$ ConnectionStrings:Test-MySQL.ProviderName %>" SelectCommand="SELECT * FROM TestTable">
I would like to replace 'TestTable' with the name of a table that is extracted from a string array in the code-behind.
Appreciatively,Peter
I have the folowing databases DB1,DB2,DB3,D4,DB5........
I have to loop through each of the databases and find out if the database has a tablename with the word 'Documents'( like 'tbdocuments' or 'tbemployeedocuments' and so on......)
If the tablename having the word 'Documents' is found in that database i have to add a column named 'IsValid varchar(100)' against that table in that database and there can be more than 1 'Documents' table in a database.
can someone show me the script to do it?
Thanks.