Toolbox Is All Grayed Out And IUIService Could Not Be Located Received
Aug 6, 2006
Every time I try to edit a Control flow or Data flow task I am getting the following error. My toolbox options are all grayed out also.
TITLE: Microsoft Visual Studio
------------------------------
The service System.Windows.Forms.Design.IUIService could not be located.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=UnableToLocateService&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Any help is appreciated
Gulden
View 4 Replies
ADVERTISEMENT
Dec 3, 2015
why the toolbox is always inactive? I am not talking about the SSIS Toolbox but just the toolbox.
View 3 Replies
View Related
Aug 11, 2006
I have a mystery that I need a little help with. I am trying to install SQL Server 2005 Std Ed. into a two node failover cluster running on top of Windows Server 2003 Enterprise Ed.. I have the cluster up and running. It consists of an IP address, cluster name, a shared drive (E:), and an MSDTC resource. When I run the SQL Server 2005 setup, the failover cluster option is always grayed out. I have tried installing from the active node and from the cluster virtual server. The result is always the same, no option to install a failover cluster. Some suggestions would be appreciated. I have read all the online docs I could find related to SQL 2005 failover clusters and found no clue.
Thanks,
VARiflesmith
View 2 Replies
View Related
Dec 12, 2007
I am building a report with several search parameters; three of which are dropdown boxes each populated by a data set. I wanted something more user-friendly than the default "(Null)" in the dropdown, so for each data set, it returns a result set UNIONed with " N/A" to show up first as the default.
For some reason, when the report loads, the first dropdown populates just fine and does indeed have the default value " N/A" but the other two dropdowns are grayed-out. Until you change the first dropdown (to anything, apparently it doesn't matter what you change it to) the other two stay grayed-out. When the first is changed, the other two are populated and default to the desired " N/A" default value.
Why would it do this, when it didn't do it before; i.e. when the default for all of them was simply null. The dropdowns are not dependent on each other; they don't depend on other parameters for their values. Any help would be appreciated.
View 2 Replies
View Related
Jul 25, 2007
I am running SQL Server 2005 Workgroup Edition with Reporting Services and would like to assign a user on the system to be a System User in Reporting Services through SQL Server Management Studio so that they can run Report Builder but the window for the Reporting Services Server Properties Permissions Page has been grayed out so I cannot add new users to make this role assignment. I can add users and perform normal role (non system roles) assignments by right clicking on the folders underneath the Reporting Services Server with no problem.
Is it due to the edition of SQL Server that I am unable to do this?
Is there another way for a user to gain access to the Report Builder application using some other authentication process?
View 1 Replies
View Related
Nov 10, 2015
I have a Tabular data model and I'm returning a measure that counts employees (each row is an employee) and then a calculated column in the model that gets SeniorityInMonths.
So if an employee was hired exactly 1 year ago, they would have 12 in this column.
I want to group these into bins, but the Group option is grayed out.
View 6 Replies
View Related
Sep 10, 2007
I have developed a renderer that renders the xml to paint a rectangle with textboxes in all the right places based on the data retrieved off the database. When i render the a complete report to the reportviewer i have no problem.
I need however to render the rectangle into a custom report item for reusability and different scenarios. This just seem to be impossible since it seems like I cant use anything other than an imagemap to render custom report items. Is this true?
To make sure you understand....in other words....
Is there a way to develop a Microsoft.ReportingServices.ReportRendering.IRenderingExtension that renders the required xml like rectangles/textboxes etc. and then migrate this to a custom toolbox item. It just seems like this should be a very easy thing to do and something regularly needed. For example when you want to use textboxes in certain positions within a rectangle to draw a organisational chart.
View 4 Replies
View Related
May 17, 2007
I just installed sql2005 and bi dev studio on a vista box. Then VS 2005 and all svc packs.
I create a new SSIS package but don't see any Data Flow Destinations in the toolbox while on the dataflow tab. I choose "show all" and don't see any data flow destinations anywhere.
I can use the wizard to create packages, and it adds destinations just fine.
Anyone have any idea what may be wrong?
View 1 Replies
View Related
Mar 29, 2015
I am trying to learn building SSAS tabular model. While following a tutorial I need to add a column to an existing table but for some reason the ADD Column option (insert column in other menu is also not appearing) is greyed out.
View 4 Replies
View Related
Aug 2, 2007
I'm trying to connect to a SQL Server 2005 database engine on a local network server. When I am presented with the Connect to Server dialog box, if I select Windows Authentication from the Authentication drop-down, the User name & Password area is grayed out and unusable. The domain user account I'm authenticated with is visible, but grayed out, and the password field is blank and unusable. I'd like to be able to connect as described in help:
User name
Enter the user name to connect with. This option is only available if you have selected to connect using Windows Authentication.
I can connect with either SQL Server or Windows authentication... but with Windows Authentication I'd love to be able to type a specific user name to select with :-)
View 4 Replies
View Related
Feb 1, 2006
Hi,
I am in the process of developing a custom component. During that time I went through many versions of my custom component, including various DLL names and signatures, different code etc.
The problem is that now I have old versions of my custom components stuck in the default settings of the toolbox. When I reset the toolbox, even if I manually deleted the old items, it appears again.
I tried to delete all the DLLs I previously copied to the SQL Server directories, and also uninstalled all the DLLs from GAC.
The result was that the new components didn't appear, and I don't have the option to choose them in the "choose items" menu, but they still appear on the toolbox.
It is not something I can't live with, but it's really annoying seeing old and irrelevant versions right in your face...
Please help :-)
View 4 Replies
View Related
Nov 27, 2006
I've created a custom data flow tranformation and it isn't showing up in the Tool Box Items to be added under the Data Flow Items tab (right click on tool box, 'Choose Items...', then clicked Data Flow Items).
I have done the following:
signed the assembly,
added to GAC,
copied the dll to C:Program FilesMicrosoft SQL Server90DTSPipelineComponents.
It worked previously when I was just starting out, however now I cannot see it. What would cause it to not show up? Everything compiles fine. How would I determine how to fix it so that it shows up?
View 1 Replies
View Related
May 3, 2007
Hi,
I am interested in adding custom buttons to the parameters toolbox (under "View Report"). I'm trying to provde a way for users viewing the report to go "Back" or up a level (in the drill through reports). Does anyone have any information on this topic, or know if it's even possible?
Thanks in advance,
-Brandon
View 3 Replies
View Related
Feb 27, 2007
I need to extract data from tables in a database that I can only access via ODBC.
I have successfully created a connection in Connection Manager (ConnectionManagerType = ODBC) for this database.
However I€™m unable to add this connection as a Data Flow Source. There is no ODBC Source option in the Toolbox.
This is a major because we have been using the system dsn Microsoft Visual Foxpro Driver to access free table directory .dbf files under ODBC with DTS for years. To install a new Microsoft OLEDB driver for foxpro is out of the question on a production system as it would cost many thousands of dollars to go through our BAT testing process
How do I extract data from tables in a database via ODBC?
Thanks in advance
Dave
View 5 Replies
View Related
Jun 17, 2015
I tried to open mdf file without any success. Then, all database files icon were changed or grayed out. How can i repair or replace the file to it's original file? ex... the file named "event.mdf" has now a wrong icon not a database icon like before.
View 11 Replies
View Related
Sep 21, 2007
I just finish my first basic report using Reporting Services and now I have to design a very complicated report.
I would like to know the purpose of tow Report Items : Subreport and Matrix.
If somebody can explain me the purpose and if he/she can point me to an example, it would be great.
Thanks
View 1 Replies
View Related
May 23, 2007
When opening an package (.dtsx) the toolbox no longer shows the Toolbox groups and items as before...
how do I reset the groups and items?
Have tried reinstalling SQL Server, and are able to manually add groups and items, but I'm looking for the correct procedure to get them back.
.LP
View 19 Replies
View Related
Jul 20, 2005
I have a client using SQL 2k, SP2 (due application requirements, SP3 is notan option - the application vendor will not specify why). We are receiving:[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL ServerConnection BrokenThere doesn't appear to be any rhyme or reason as to why this is happening.And...it shows it's ugly head at random places during execution. Has anyoneexperienced this also, or have any ideas on what to look for? I have seennumerous suggestions stating to upgrade from MDAC 2.6 to 2.7. At thispoint, I'm not sure if thats an option based on the vendors application(which by the way they no longer support!).Any ideas will be greatly appreciated.Greg
View 1 Replies
View Related
May 21, 2007
Hello,
when is seemd that everything works some weird behaviours comes out.
I try to summarize the problem without to post the complete code.
Service Broker is set to have a dialog between two databases on the same SQL Server instance.
The Initiator queue has retention=on and there is an activation SP to handle errors and Target's end dialog message.
The Target queue has retention=off, MAX_READER =1 and there is an activation SP to receive the message (WAIT FOR (RECEIVE (1) ...), TIMEOUT 30000 and do something with this message (sample insert into a DB).
The conversation has a Timeout Dialog to end the dialog after a while.
The problem that the message is constantly processed. The Process doens't stop is I end the dialof after the processing either.
n.b.the Receive is within a Transation that I commit at the end.
some other informations that in the meanwhile I found out :
This was my complete WAIT FOR(RECEIVE :
WAITFOR ( RECEIVE top(1) -- just handle one message at a time
@message_type=message_type_id, --the type of message received
@messagetypename=message_type_name,
@message_body=message_body, -- the message contents
@dialog = conversation_handle -- the identifier of the dialog this message was received on
FROM [TargetQueue]
), timeout 1000;
if (@@ROWCOUNT = 0)
BEGIN
COMMIT;
BREAK;
END
IF I delet TIMEOUT 1000, everything works as expected ...
Inside if (@@ROWCOUNT = 0)BEGIN..END I wrote also an Insert into a table to see wheter the end of the queue was reached but this insert never occurs (neither with not without timeout)
I'm happy that it works what if this is the solution, it make no sense to me!
Any ideas?
Thank you!
M.B.
Thank you very much
M.B.
View 9 Replies
View Related
Apr 10, 2008
Hi All
I am sending two messages across servers with in the same transaction but they are received in the incorrect sequence.
Message1 from service1 to service2 on contract1 with RELATED_CONVERSATION_GROUP = 'xxxxxxx'
Message2 from service1 to service2 on contract2 with RELATED_CONVERSATION_GROUP = 'xxxxxxx'
Message2 is always received first at the target and is causing our process to fail.
When I check the service2 definition contract2 is specified first. Can this be the issue? I tried to change this order by dropping the contracts from the service and adding again but it still keeps the same order.
Please help.
View 4 Replies
View Related
Mar 8, 2007
I've check out that this error code says: A literal value in the command overflowed the range of the type of the associated column.
I received the error message when inserting large block data into a image column in SQL Server 2000. As I know, image support max 2G data to store. I use the C code function below to insert the data:
DBCreateParamBinary (hStmt, "", DB_PARAM_INPUT,&(pMonitorDBData->SampDat),NUM_SAMPLES_SETDBMONITOR*sizeof(float64) );
in which, the NUM_SAMPLES_SETDBMONITOR*sizeof(float64) stands for the data length by byte. and ,&(pMonitorDBData->SampDat) stands for the pointer address of the data block. (pls note: NUM_SAMPLES_SETDBMONITOR*sizeof(float64) = 4096*8=32768 bytes)
In addation, I've tried to use certain numbers instead of "NUM_SAMPLES_SETDBMONITOR*sizeof(float64)", and I found I could only set this value up to 8003 bytes. If 8003 above, this error message would be received.
What should I do with this issue? Any help?
Thanks a million!
View 1 Replies
View Related
Nov 8, 2007
Here is the issue I'm encountering.
Steps to recreate:
Start Business Intelligence Stuido
Select New Project
Select Integration Services Project from Templates
Project opens with default package.dtsx
Open Toolbox but I am missing all but a few of my items
Only items available are MAINTENANCE PLAN TASKS and GENERAL(which is totally empty)
I've changed the view from List View to Show All but which will display all the groups but all the options in those groups are grayed out.
I'm running on Windows Vista Business edition with SQL server 2005(9.0.3054) with SSIS installed. If someone could help me figure out why I don't have any avaible options it would be greatly appreciated.
View 6 Replies
View Related
Jan 29, 2007
From SQL Management Studion I go to Management > Database Mail and I am trying to send a test email but I never receive anything. I checked my SMTP Mail Server Logs and I saw no entry of my test email.
I also I checked my SQL Database Mail Logs and everything seems fine, no errors are reported.
The msdb.dbo.sysmail_allitems shows my email status as "sent".
So what am I missing? What steps would you recommend for troubleshooting my problem?
Thank you,
Ric
View 7 Replies
View Related
Mar 30, 2012
I developed a mass mailing tools, but all mails received in junk and spam folder
I use an store procedure 'sp_send_dbmail' which is by default in sql server, when i send an testing mail using object explorer ->Database mail -> right click -> send testing mails, then this mail received in inbox, but when i call 'sp_send_dbmail' this procedure using job with 2 min intervals then mails received in junk or spam folder of recipients..
I configured correctly all information of smtp details ip address...
Why mails r received as junk or spam folder ??
View 2 Replies
View Related
Apr 18, 2012
i got stuck, while sending emails using store procedure sp_send_dbmail, when i m sending simple text format then mail received in inbox but whenever i m trying to send an html format emails with links of images and href tags mails received in spam.. i store procedure is given below..
DECLARE @tableHTML varchar ;
SET @tableHTML =
'<table border="1" >
<tr>
<td width="187"><a href="http://printbooth.in/product-list.php?cat_id=16&subcat_id=265" target="_blank"><img
[code]...
View 1 Replies
View Related
Jun 22, 2015
I am using SSIS 2014 and installed adapter for sharepoint list source and destination and when I refresh the toolbox I don't see them. Is there a way to manually add them?
View 4 Replies
View Related
Jul 26, 2007
I have 2 DropDownList, the first one to display the product category and the other one to display the products based on the selected category. However, when I run code I received the following error message: Input string was not in a correct format.
Please find the code below.
Thanks,
Andy.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server"><title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
DataTextField="Name" DataValueField="Name">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Assignment2ConnectionString %>"
SelectCommand="SELECT [Name] FROM [Category]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList2" runat="server" DataSourceID="SqlDataSource2"
DataTextField="Name" DataValueField="Name">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:Assignment2ConnectionString %>"
SelectCommand="SELECT [Name] FROM [Product] WHERE ([CategoryID] = @CategoryID2)">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="CategoryID2" PropertyName="SelectedValue"
Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
</div></form>
</body>
</html>
View 1 Replies
View Related
Jul 26, 2002
when i tried to run a DTS which transfer bulk data between 2 SQL servers, i got following error message:
================================================== ============
Error: -2147467259 (80004005); Provider Error: 4815 (12CF)
Error string: Received invalid column length from bcp client.
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
================================================== ===========
if anybody has encounter the same problem before? after testing, i think it's
must related with network traffic problem. but i can not figure out how to solve it.
View 2 Replies
View Related
Jun 25, 2014
I am actually very new to SQL databases, I have received an .MDF and .LDF for a database of size 50 GB...
I need to create or attach these files to a new database and extract some columns then convert them to .text or .csv...
View 5 Replies
View Related
Oct 11, 2004
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as I’ve got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 – setup as a published app on a terminal server – running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
-Involves 1 particular DB (thats accessed by VB app) & its developement db
-All connections are coming from 1 application server
-Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.
View 4 Replies
View Related
Oct 23, 2005
Hi,I've developed an ASP.NET application which uses MS-SQL Server 2000 as abackend. But as the site hits increase SQL server reponse becomes lower.At some stage after that SQL Server gets automativally stopped bringingcomplete web-application down to halt. i checked the Windows 2000 EventLogs and found several error logs indicating folloowing line."SQL Server 2000 Error 17805 Invalid buffer received from client.". Butno errors on UI side. What may be the actual problem.In storedproceduresor at some other place?Awaiting favourble reply.Regards,Amit*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Jul 20, 2005
Hi,I am getting "Row cannot be located for updating. Some values may havebeen changed" error when I try to update from visual basic with ado.This happens only when set as default locale on the pc other languagethan English.Anybody can help on this¿Thanks*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jul 23, 2005
Hi,I am attempting a bulk copy from a c program into SQL Server 2000 usingDBLib in freeTDS 0.63 RC11 (gcc 3.4.3, RH 9). I am getting an error messagethat I cannot find any documentation on.The server is sending back the following: "Received invalid row length 2from bcp client. Minimum row size is 4."I know the row is longer 2 bytes (see below). Once this happened I created atest table and C program. See below. Anyone with any ideas?ThanksProgram output ---------------->$ ./test_bcpbcp'ing This is a test with a length of 14sentMsg 4807, Level 16, State 1Server 'CENTIVIA_10', Line 1Received invalid row length 2 from bcp client. Minimum row size is 4.done<----------------------Table ddl --------------------->CREATE TABLE [xxx] ([col2] [varchar] (32) COLLATE SQL_Latin1_General_CP1_CI_AS NULL) ON [PRIMARY]GO<------------------------------------Compiled using gcc ------------------->gcc -g -I/home/test_user/dev/freetds-0.63RC11/include -Wall -Wno-strict-aliasing-g -O2 -c -o test_bcp.o test_bcp.cgcc -o test_bcp test_bcp.o -L/home/test_user/lib -lsybdb<----------------------------------program source (included the msg and error handlercode) -------------------------->#include <string.h>#include <stdio.h>#include <stdlib.h>#include <sqldb.h>intsyb_msg_handler(DBPROCESS * dbproc, DBINT msgno, int msgstate, int severity,char *msgtext, char *srvname, char *procname, int line){char var_value[31];int i;char *c;if (msgno == 5701 || /* database context change */msgno == 5703 || /* language changed */msgno == 5704) { /* charset changed */if (msgtext != NULL && (c = strchr(msgtext, ''')) != NULL){i = 0;for (++c; i <= 30 && *c != ' ' && *c != '''; ++c)var_value[i++] = *c;var_value[i] = ' ';}return 0;}if (severity >= 0 || msgno == 0) {if (msgno > 0 && severity > 0) {fprintf(stdout, "Msg %d, Level %d, State %d",(int) msgno, (int) severity, (int) msgstate);fprintf(stdout, "Server '%s'", srvname);if (procname != NULL && *procname != ' ')fprintf(stdout, ", Procedure '%s'",procname);if (line > 0)fprintf(stdout, ", Line %d", line);fprintf(stdout, "");fprintf(stdout, "%s", msgtext);fflush(stdout);} else {fprintf(stdout, "%s", msgtext);fflush(stdout);}}return 0;}intsyb_err_handler(DBPROCESS * dbproc, int severity, int dberr, int oserr, char*dberrstr, char *oserrstr){if (dberr == SYBESMSG)return INT_CANCEL;env_set(g_env, "batch_failcount", "1");fprintf(stdout,"DB-LIBRARY error (severity %d, dberr %d, oserr %d, dberrstr%s, oserrstr %s):",severity, dberr, oserr, dberrstr ? dberrstr : "(null)",oserrstr ? oserrstr : "(null)");fflush(stdout);if ((dbproc == NULL) || DBDEAD(dbproc)) {if (dberr != SYBECOFL) {exit(255);}}return INT_CANCEL;}int main(int argc, char *argv[]){DBPROCESS *dbproc;LOGINREC *login;DBINT test_int = 99999999;DBCHAR test_char[32] = "This is a test";dbinit();dberrhandle(syb_err_handler);dbmsghandle(syb_msg_handler);login = dblogin();DBSETLPWD(login, "audit");DBSETLUSER(login, "audit");dbproc = dbopen(login, "192.168.58.1");dbuse(dbproc, "audit_dev");bcp_init(dbproc,"xxx", (BYTE *)NULL, (BYTE *)NULL, DB_IN);printf("bcp'ing %s with a length of%d",test_char,strlen(test_char));//ii = bcp_bind(dbproc, (BYTE *) &test_int, 0, -1, NULL, 0, SYBINT4,1 );//printf("bound %d",ii;bcp_bind(dbproc, test_char, 0, strlen(test_char), NULL, 0, SYBCHAR,1 );bcp_sendrow(dbproc);printf("sent");bcp_batch(dbproc);printf("done");return 0;}<---------------------------------
View 1 Replies
View Related
