How do I check the compatability level of a database?
The db in question was originally created in SQL 6.5 and converted to 7.0. Would this have reset the compatability level to 7 or left it at 6.5?
If it is at 6.5 what are the implications of changing it to 7?
Ray, if you answer this can you please forward me your email address. Thanks.
How do you tell a databases compatability level?
View 1 Replies View RelatedI am currently running a sqlServer 2000 database and am considering changing it to 2005 I see that I can do this via Properties> options and changing the dropdownbut are there any risks?
Is there any way to run upgrade advisor against a database the is on a sql 2005 server but set to 80 compatability level?
Or is there another tool to do this?
Finally, I may have a good enough excuse to justify changing the compatabilty level of one of the biggies I look after!
Before I go ahead with the change I just wanted to run a couple of questions passed the community.
I know this is very vague, but what sort of problems should I expect? I know there are a few syntax changes, but I don't imagine I will have a problem going up in compatability level!
What is the best method to perform this?
A very simple
EXEC sp_dbcmptlevel 'playdb', 80
Or
ALTER DATABASE SET SINGLE_USER
EXEC sp_dbcmptlevel 'playdb', 80
ALTER DATABASE SET MULTI_USER
How long does this process take; are we talking seconds, minutes, hours? I imagine it's seconds, but I pose this question because a colleague reckons it will take longer because of the database size. I argue that because it's a db configuration setting, it will make no difference...
Thanks a bunch,
George
Does SQL Server Express Edition work with a Pentium M computer? When I downloaded it there was a message that it wasn't the proper hardware but everything else fits the requirements for an install.
View 6 Replies View RelatedHi,We currently have a fairly old product, which was originally onlycompatible with SQL 2000.When we upgraded our server to SQL 2005, the client product gave us a"This product is not compatible with this version of SQL server"error.We put the server into SQL 2000 compatability mode, and things worked.Then I tested a Windows Vista workstation client. The error returned.I realise that if we are simply dealing with a client incompatabilitywith Vista, then I'm in the wrong forum, but what I'm hoping is thatsomeone knows anything server side, perhaps where SQL 2000compatability mode becomes ignored for some reason, when the client isrunning Vista.The vendor pretty much no longer exists, and nothing I've been able todo with Vista's compatability modes has been helpful so far.
View 1 Replies View RelatedI'm sure this question has already been asked, I made an attempt to search the forums, but was unsuccessful.
Our production servers are currently running SQL Server 2000 3a. I just got a new development system and have no intentions of installing SQL Server 2000 dev, but SQL Server 2005 Dev Edition.
I was wondering if I will still be able to install SQL2005 and still be able to administer/modify 2000 mdfs with SQL 2005 Enterprise Manager. I wanted to be able to still make development on SQL 2k5 and update the production server (SQL2k). This is on my dev system not the production, the production will still be running SQL 2k, until the client decides on purchasing SQL 2k5.
Of course I will not be able to use the new db features and types on a SQL2000 server, I just want to maintain the legacy with 05 Enterprise Manager (i.e.: SP, UDF and DTO).
Thanks a gig.
Larry
I need to know if Microsoft supports SQL Server 2000 running on the same server that functions as a Terminal Server (both NT and Windows 2000).
I checked out Microsoft.com and found that SQL Server 7 is supported with NT Terminal Services but can't locate any compatability information SQL 2000.
PS: I know this configuration doesn't make sense from a performance perspective but my customers will want to do this anyway.
Thanks!
Do you know of any resources in terms of Transact SQL in order to migrate from 6.5 to 2000?
View 1 Replies View RelatedhiI just gotta know:what is the database that sql server creates/works with?Can it be used in an oracle environment?Or can it be uploaded to a Oracle db? (like access thru odbec)thanks!!jim
View 1 Replies View RelatedI upgrade to sql 2005 from sql2000. The problem is that the compatability mode 90 is not available, 8.0 and 7.0 are, when looking at the compatability level in the properties tab. THe GUI, Management studio is loaded and operational.
What do I need to do to make the 90 compatability mode available?
Thanks!
Hello!
I have sql server 2000(sp2) rs installed on one of my mashine and I am using VS,NET 2005 to develop some reports.
At the deploing step I am getting some error:
"Connection could not be made to the report server http://..."
Additional information on error message says:
"The attempt to connect to report server failed.Check your connection information and that report server is a compatible version. (Microsoft.ReportingServices.Designer)."
Can't find any information about this issue. Is there anything I have to do to fix this.
We have multiple NT machines which have/require Service Pack 3 installed and run an application which makes an ODBC connection to an SQL 7 DB. Some of them are experiencing ODBC issues.
Question: Are there any known ODBC compatability issues with machines runnings service pack 3 ODBC connecting to SQL 7 running NT Service Pack 4?
I have ran into a problem making a database where i have two versions of a book , one in russian and the other in English. The english part worked but when i input the data for Russian it gets replaced each time with question marks. Is there something i have to enable for the SQL database for it to be able to store Russian Text, or is it a DataType i have to set???
THANKS IN ADVANCE
Hi,
I have a database that is in the SQL Server 2000 compatability mode on my SQL 2005 server. I am trying to restore a backup of this database on my SQL Server 2000 database on another server and keep getting strange messages. First trying Red-Gate and then plain SQL Server with no luck.
It seems as I remember that the 7.0 and 2000 compatibility issue between backups did not arise when the compatibility mode was set to 7.0.
Is this "planned" behavior or an "undocumented feature"??? Anyone else have success doing this?
Thanks,
John Campbell
I want to perform column level and database level encryption/decryption....
Does any body have that code written in C# or VB.NET for AES-128, AES-192, AES-256 algorithms...
I have got code for single string... but i want to encrypt/decrypt columns and sometimes the whole database...
Can anybody help me out...
If you have Store procedure in SQL for the same then also it ll do...
Thanks in advance
Hi,
AM in need of SSRS 2005 design documents for a project purpose. Can somebody let me know where can i find these documents? Thanks in advance
When you utilize transactions in ADO.NET are the locks put on the entire TABLE used or at the row level?
For instance if you do a SELECT within a transaction if you only pull 5 rows out of a 1000 row table can you just make it lock the rows that have been pulled? It seems like it locks the entire table?
Thanks
Hi, Can anybody please explain me, what is low level and high level locking in SQL Server 2005 database.
Also what is the name of process which converts low level locking into high level locking and vise versa.
-Sanjeev
Hi..I'd very much appreciate it if someone would tell me how to translatea statement level trigger written in Oracle to its equivalent (if there isone)in MS SQL Server. Ditto for a row level trigger.If this is an old topic, I apologize. I'm very much a newbie to SQL Server.Regards,Allan M. Hart
View 2 Replies View RelatedProblem setting is a geography dimension with multiple user defined hierarchies in SSAS 2008.
Ex.:
Hierarchy 1 (political territory): level 6 --> level 5 --> level 4 --> level 3 (state) --> level 2 --> level 1
Hierarchy 2 (sales territory): level 4 --> level 3 --> level 2 (sales region) --> level 1
...
Hierarchy 9
The relationship between state and sales region is n:1, i.e. one state belongs to exactly one sales region, and one sales region can consists of one or multiple states. Unfortunatly I can't define this attribute relationsship in the dimension because it would lead to a diamond-shaped relationsship without a user-defined-hierarchy to back it up. So far that isn't much of a problem, user don't drill down from sales region to state. But now I want to define a calculated member that multiplies a measure from the main measure group with another measure from a weighting factor measure group at the state level and above. The granularity attribute of the geography dimension in the dimension usage tab of the weighting factor measuregroup is the state.
So far what I've got is:
CREATE MEMBER Currentcube.Measures.[weighted measure state and above] AS NULL;
SCOPE (Measures.[weighted measure state and above],
Descendants(geography.[political territory].[all member],3,SELF_AND_BEFORE),
Descendants(geography.[salesterritory].[all member],2,SELF_AND_BEFORE),
... Descendants(geography.[hierarchy 9].[all member],1,SELF_AND_BEFORE)); this = sum(existing(geography.[political territory].state.members), measures.[main measure group measure] * measures.[weighting measure group measure]);END SCOPE;
This works from a functional point of view, but is rather slow when querying any other hierarchy than the political territory hierarchy, because SSAS first goes down from the state level to the key attribute of the geography dimension, and then aggregates from there to the sales region.In other words, I want SSAS to resolve the relationsship (which state belongs to which sales region) through the dimension, and not through the fact, and apply the calculation afterwards. Like some kind of currency conversion, but only from a certain level upwards.
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Does anyone know if SQL Server 2005 as a built-in way (sp or func) to calculate a row-level CRC?
View 2 Replies View Relatedlets say user1 is reading row1, then user2 reads and updates row1, when user1 is about to update row1 i want him to be informed that his copy of row1 have been updated, so he has now the options to either get the new version of row1 or cancel his update process.
View 4 Replies View RelatedHow can i write a trigger which gets fired for each row that is being deleted
i.e. Row level Trigger
I tried something like this
ALTER TRIGGER [dbo].[Del_Msg]
ON [Seat27].[dbo].[Email_Messages]
AFTER DELETE
&.......
it gets executed once for the triggering SQL statement
In a Stored Procedure, I created a table in code:
CREATE TABLE TEMP ( ...)
, then ALTER TABLE TEMP ADD int1 int, varchar2 varchar(25)
I inserted some rows to the above table. Everything looks good.
Here's what puzzled me:
SELECT * FROM TEMP shows all the rows inserted.
But
SELECT int1, varchar2 FROM TEMP caused this error:
Server: Msg 207, Level 16, State 3, Line 5
Invalid column name 'int2'.
Server: Msg 207, Level 16, State 1, Line 5
Invalid column name 'varchar2'.
Thanks for any help.
I have a busy transactional table , I wanna use row level locking mechanism in msSQL.
SELECT * FROM PARTY WITH (UPDLOCK ROWLOCK)
where LastName ='Clinton'
is there any downsides of this approach?
I am looking for a way to implement row level security on my SQL Server 2005 Express database. Thanks in advance for any input.
View 1 Replies View RelatedHi,
I am asked to look into a DB which was upgraded from SQL65 to SQL70.
Problems:
1.The SQL was renamed from Server_old to Server_NEW.The Sysservers tables still have entry with Server_old name and srvid = 0(local).The server is running with this config.from last few months w/o any problem(this is what the present DBA working on this DB says)...whereas the name has changed from server-old to server_new.
2.2 user DB on this Server has compatibility level of 65.Any suggestion as should I set the compatibility level to 70 or leave it as it is.client is planning to first,go for replication from sql70/EE to SQl70/EE on Nt4/SP6.
Second,they are also planning to upgrade to sql2k.
Any thoughts appreciated.
Is there a way to change the default isolation level at the SQL Server level to READ UNCOMMITED ??
View 2 Replies View RelatedI used sp_indexoption to allow row locks and disallow page locks on all indexes of a heavily contented table (lots of concurrent selects/inserts/updates). The first error I saw was "The SQL Server cannot obtain a LOCK resource at this time. Rerun your statement when there are fewer active users or ask the system administrator to check the SQL Server lock and memory configuration.". I restarted the sql server and everything is ok (the server is not very powerful and will be beefed up).
My question is that with the above settings, will the select statements acquire row-level shared locks as well? Since our select queries are fairly complicated, my main concern is that we may frequently run of of resource even with a more powerful machine. Is my concern valid or I got everything wrong?
Thanks a lot.
Hi there,
yes, There is a 'insert row level locking' but
Is there anything for delete or update row level locking?
We keep geting deadlock problem with our application with multi-users. First we ran into the deadlock on INSERT. By setting 'insert row level locking' help us to go a little bit further but later we run into deadlock with DELETE. For my knowlege, DELETE and UPDATE requires exclusive page lock. Might be I am out of date.
Thanks in advance for your help
Tung Nguyen