Torn Page Problem
Feb 16, 2006
Hi
When trying to create an SqlServer job, clicking OK' I got the message
"Error 823: I/O error (torn page) detected during read at offset..... in
file 'd:sqlserverMSSQLdatamsdata.mdf'. The job was not saved"
I asked about the problem a little to find out that I need to restore a
backup of MSdb because the job definitions are there. I rrad some other
place (I can't remember where) that in order to restore MSdb I need to
restore a backup of Master as well.
Can anyone give me some more information on this.
Is there any way else to do it besides restoring the backup ?
To restore, do I need to recreate the database or just restore the
appropiate backup file ?
David Greenberg
View 1 Replies
ADVERTISEMENT
Jan 31, 2007
Hello,
I'm wondering if anyone has any insight as to what happened here. We had a DBCC checkdb error as follows:
Server: Msg 8946, Level 16, State 12, Line 2
Table error: Allocation page (16:3769008) has invalid PFS_PAGE page header values. Type is 0. Check type, object ID and page ID on the page.
So we then ran:
dbcc traceon(3604)
go
dbcc page (<dbname>,16,3769008,1,0)
go
dbcc traceoff(3604)
go
and got:
Server: Msg 8939, Level 16, State 98, Line 1
Table error: Object ID 99, index ID 0, page (16:3769008). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
PAGE: (16:3769008)
------------------
BUFFER:
-------
BUF @0x00FE0640
---------------
bpage = 0x76F22000 bhash = 0x00000000 bpageno = (16:3769008)
bdbid = 6 breferences = 1 bstat = 0x809
bspin = 0 bnext = 0x00000000
PAGE HEADER:
------------
Page @0x76F22000
----------------
m_pageId = (16:3769008) m_headerVersion = 1 m_type = 11
m_typeFlagBits = 0x0 m_level = 0 m_flagBits = 0x0
m_objId = 99 m_indexId = 0 m_prevPage = (0:0)
m_nextPage = (0:0) pminlen = 0 m_slotCnt = 1
m_freeCnt = 2 m_freeData = 8188 m_reservedCnt = 0
m_lsn = (3975:179853:10) m_xactReserved = 0 m_xdesId = (0:0)
m_ghostRecCnt = 0 m_tornBits = 2
Allocation Status
-----------------
GAM (16:3578624) = NOT ALLOCATED
SGAM (16:3578625) = NOT ALLOCATED
PFS (16:3769008) = 0x0 0_PCT_FULL
DIFF (16:3578630) = NOT CHANGED
ML (16:3578631) = NOT MIN_LOGGED
DATA:
-----
Slot 0, Offset 0x4040
---------------------
Row at offset 16448 may be corrupt.
Hex dump of remaining -8258 bytes:
The database is not marked suspect and we have backups to restore, if necessary, but I'm wondering if anyone can interpret what the dbcc commands are telling us and how we can diagnosis what's happening...
Thanks!
Jason
View 1 Replies
View Related
Nov 2, 2005
Hi all. I'm getting an error mssage which tells me I have a torn page:ODBC error 823 (HY000) I/O error (torn page) detected during read atoffset 0x00000080b5c000 in file 'D:WINSUPPORTDATAWin SupportDatabase_2_Data.NDF'.I ran DBCC CHECKDB and it returned no errors:CHECKDB found 0 allocation errors and 0 consistency errors in database'WIN Support Database'.I really don't know what to do at this point. I'm not a databaseadministrator, just a programmer, and our DBA is not here. Anysuggestions?Thanks,Jennifer
View 1 Replies
View Related
Sep 14, 2000
Anyone working with databases with this option turned on? How does it affect performance?
View 3 Replies
View Related
Oct 5, 2004
We received the following errors:
1) Error: 823, Severity: 24, State:
2) I/O error (torn page) detected during read at offset 0x0000001455a000..erc
Network team thinks this was caused by low disk space. I was running a database shrink last night, and someone had transferred a file to server prior to my job that took 90% of disk. My shrink job failed and then 20 minutues later we satrted to recieve the two above mentioined.
Can a failed shrink job - which failed due to low disk space cause a torn page to occur? I have not heard of this...
View 3 Replies
View Related
Jan 7, 2005
Hi, We recently had one of our drives (RAID5) replaced because of failure. This has resulted in a torn page being detected on one of our smaller SQL 2000 databases. We have one or two larger SQL databases (30-70GB) on the same drive amongst several others and are now concerned that we may have a problem with these databases also. (The original torn page only came to light when a query was run on one of the tables). Is there anyway I can run a procedure on each of the databases to find out if we have any problems with torn pages? I obviously don't want to restore the databases as this will take a substantial amount of time that we just don't have at the moment. Any ideas that could put our minds at rest would be much appreciated.
Many thanks.
View 4 Replies
View Related
Mar 22, 2006
hi all...
my prod database facing the problem i mention. it show this error when i run some of the query.
Error: 823, Severity: 24, State: 2
I/O error (torn page) detected during read at offset 0x000000ffd0e000 in file 'F:dsUnit'.
i running dbcc checkdb on it. this is the result
DBCC results for 'dsActive3'.
DBCC results for 'sysobjects'.
There are 472 rows in 8 pages for object 'sysobjects'.
DBCC results for 'sysindexes'.
There are 728 rows in 39 pages for object 'sysindexes'.
DBCC results for 'syscolumns'.
There are 4243 rows in 106 pages for object 'syscolumns'.
DBCC results for 'systypes'.
There are 26 rows in 1 pages for object 'systypes'.
DBCC results for 'syscomments'.
There are 281 rows in 66 pages for object 'syscomments'.
DBCC results for 'sysfiles1'.
There are 7 rows in 1 pages for object 'sysfiles1'.
DBCC results for 'syspermissions'.
There are 49 rows in 1 pages for object 'syspermissions'.
DBCC results for 'sysusers'.
There are 13 rows in 1 pages for object 'sysusers'.
DBCC results for 'sysproperties'.
There are 0 rows in 0 pages for object 'sysproperties'.
DBCC results for 'sysdepends'.
There are 2776 rows in 18 pages for object 'sysdepends'.
DBCC results for 'sysreferences'.
There are 26 rows in 1 pages for object 'sysreferences'.
DBCC results for 'sysfulltextcatalogs'.
There are 0 rows in 0 pages for object 'sysfulltextcatalogs'.
DBCC results for 'sysfulltextnotify'.
There are 0 rows in 0 pages for object 'sysfulltextnotify'.
DBCC results for 'sysfilegroups'.
There are 4 rows in 1 pages for object 'sysfilegroups'.
DBCC results for 'INSTRUCTION'.
There are 0 rows in 0 pages for object 'INSTRUCTION'.
DBCC results for 'DATASWEEP_CODES'.
There are 180 rows in 4 pages for object 'DATASWEEP_CODES'.
DBCC results for 'DATASWEEP_SEQUENCE'.
There are 7 rows in 1 pages for object 'DATASWEEP_SEQUENCE'.
DBCC results for 'OPERATION'.
There are 52 rows in 1 pages for object 'OPERATION'.
DBCC results for 'Results'.
There are 2 rows in 1 pages for object 'Results'.
DBCC results for 'DC_BLOB'.
There are 8 rows in 1 pages for object 'DC_BLOB'.
DBCC results for 'PRODUCTION_LINE'.
There are 2 rows in 1 pages for object 'PRODUCTION_LINE'.
DBCC results for 'DS_PERSISTENT_OBJECT'.
There are 5 rows in 1 pages for object 'DS_PERSISTENT_OBJECT'.
DBCC results for 'EQUIPMENT'.
There are 0 rows in 0 pages for object 'EQUIPMENT'.
DBCC results for 'RESOURCE_CONDITION'.
There are 2 rows in 1 pages for object 'RESOURCE_CONDITION'.
DBCC results for 'IMAGE_BLOB'.
There are 0 rows in 0 pages for object 'IMAGE_BLOB'.
DBCC results for 'ROUTE'.
There are 125 rows in 2 pages for object 'ROUTE'.
DBCC results for 'JOB_CONFIG'.
There are 19 rows in 1 pages for object 'JOB_CONFIG'.
DBCC results for 'UNIT_CHECKLIST'.
There are 0 rows in 0 pages for object 'UNIT_CHECKLIST'.
DBCC results for 'JOB_SCHEDULE'.
There are 10 rows in 1 pages for object 'JOB_SCHEDULE'.
DBCC results for 'LOCATION'.
There are 1 rows in 1 pages for object 'LOCATION'.
DBCC results for 'WORK_ORDER_ITEMS'.
There are 4375 rows in 139 pages for object 'WORK_ORDER_ITEMS'.
DBCC results for 'NOTE_BLOB'.
There are 0 rows in 0 pages for object 'NOTE_BLOB'.
DBCC results for 'ROUTE_STEP'.
There are 599 rows in 13 pages for object 'ROUTE_STEP'.
DBCC results for 'PART'.
There are 1827 rows in 69 pages for object 'PART'.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610106) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 0, page (5:610106). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610107) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 0, page (5:610107). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610165) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 0, page (5:610165). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 475148738, index ID 0: Page (5:610166) could not be processed. See other errors for details.
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610224) does not match the previous page (5:610106) that the parent (5:614865), slot 80 expects for this page.
DBCC results for 'DS_TABLESPACE_MAP'.
There are 6 rows in 1 pages for object 'DS_TABLESPACE_MAP'.
DBCC results for 'BOM_PART_LIST'.
There are 9927 rows in 196 pages for object 'BOM_PART_LIST'.
DBCC results for 'SITE_INFO'.
There are 1 rows in 1 pages for object 'SITE_INFO'.
DBCC results for 'RESOURCE_ARC'.
There are 2 rows in 1 pages for object 'RESOURCE_ARC'.
DBCC results for 'CARRIER_COMPARTMENT'.
There are 0 rows in 0 pages for object 'CARRIER_COMPARTMENT'.
DBCC results for 'RESOURCE_QUEUE'.
There are 2 rows in 1 pages for object 'RESOURCE_QUEUE'.
DBCC results for 'TRX_BASE'.
Server: Msg 8936, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. B-tree chain linkage mismatch. (5:610618)->next = (5:610224), but (5:610224)->Prev = (5:611693).
Server: Msg 8981, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The next pointer of (5:610619) refers to page (5:610343). Neither (5:610343) nor its parent were encountered. Possible bad chain linkage.
Server: Msg 8934, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The high key value on page (5:610616) (level 0) is not less than the low key value in the parent (0:1), slot 0 of the next page (5:610618).
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610618) does not match the previous page (5:610616) that the parent (5:614865), slot 94 expects for this page.
Server: Msg 8936, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. B-tree chain linkage mismatch. (5:610616)->next = (5:610618), but (5:610618)->Prev = (5:611693).
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610619) does not match the previous page (5:610618) that the parent (5:614865), slot 95 expects for this page.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. Page (5:610619) is missing a reference from previous page (5:611693). Possible chain linkage problem.
Server: Msg 8935, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. The previous link (5:611693) on page (5:610620) does not match the previous page (5:610619) that the parent (5:614865), slot 96 expects for this page.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. Page (5:610620) is missing a reference from previous page (5:611693). Possible chain linkage problem.
Server: Msg 8978, Level 16, State 1, Line 1
Table error: Object ID 475148738, index ID 1. Page (5:610622) is missing a reference from previous page (5:610620). Possible chain linkage problem.
Server: Msg 8928, Level 16, State 1, Line 1
Object ID 587149137, index ID 0: Page (4:523911) could not be processed. See other errors for details.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 587149137, index ID 0, page (4:523911). Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
There are 67236767 rows in 2321938 pages for object 'TRX_BASE'.
CHECKDB found 0 allocation errors and 18 consistency errors in table 'TRX_BASE' (object ID 475148738).
DBCC results for 'CHECKLIST_ITEM'.
There are 0 rows in 0 pages for object 'CHECKLIST_ITEM'.
DBCC results for 'DCS_LIST'.
There are 0 rows in 0 pages for object 'DCS_LIST'.
DBCC results for 'DCS_PARM'.
There are 253 rows in 7 pages for object 'DCS_PARM'.
DBCC results for 'RESOURCE_QUEUE_LINK'.
There are 2 rows in 1 pages for object 'RESOURCE_QUEUE_LINK'.
DBCC results for 'RESOURCE_ROUTE'.
There are 1 rows in 1 pages for object 'RESOURCE_ROUTE'.
DBCC results for 'DS_OBJECT_BLOB'.
There are 45 rows in 1 pages for object 'DS_OBJECT_BLOB'.
DBCC results for 'TEST_INSTANCE'.
There are 5836487 rows in 159046 pages for object 'TEST_INSTANCE'.
DBCC results for 'FORM_BLOB'.
There are 647 rows in 4 pages for object 'FORM_BLOB'.
DBCC results for 'ROUTE_ARC'.
There are 1047 rows in 9 pages for object 'ROUTE_ARC'.
DBCC results for 'UNIT'.
There are 5139230 rows in 309518 pages for object 'UNIT'.
CHECKDB found 0 allocation errors and 2 consistency errors in table 'UNIT' (object ID 587149137).
DBCC results for 'INSTRUCTION_BLOB'.
There are 0 rows in 0 pages for object 'INSTRUCTION_BLOB'.
DBCC results for 'ROUTE_QUEUE'.
There are 599 rows in 5 pages for object 'ROUTE_QUEUE'.
DBCC results for 'INSTRUCTION_LIST'.
There are 0 rows in 0 pages for object 'INSTRUCTION_LIST'.
DBCC results for 'LOT'.
There are 313 rows in 12 pages for object 'LOT'.
DBCC results for 'ROUTE_QUEUE_LINK'.
There are 599 rows in 9 pages for object 'ROUTE_QUEUE_LINK'.
DBCC results for 'SCHEMA_VERSION'.
There are 2 rows in 1 pages for object 'SCHEMA_VERSION'.
DBCC results for 'PRODUCT_ROUTE_P_LINE_REL'.
There are 0 rows in 0 pages for object 'PRODUCT_ROUTE_P_LINE_REL'.
DBCC results for 'SERIAL_NUMBER'.
There are 1 rows in 1 pages for object 'SERIAL_NUMBER'.
DBCC results for 'PRODUCT_RS_WC_REL'.
There are 0 rows in 0 pages for object 'PRODUCT_RS_WC_REL'.
DBCC results for 'RESOURCE_STEP'.
There are 2 rows in 1 pages for object 'RESOURCE_STEP'.
DBCC results for 'STATION'.
There are 53 rows in 1 pages for object 'STATION'.
DBCC results for 'SUBROUTINE_BLOB'.
There are 354 rows in 2 pages for object 'SUBROUTINE_BLOB'.
DBCC results for 'TMPL_TBOM'.
There are 2 rows in 1 pages for object 'TMPL_TBOM'.
DBCC results for 'TBOM_PART_LIST'.
There are 0 rows in 0 pages for object 'TBOM_PART_LIST'.
DBCC results for 'TMPL_TBOM_PART_LIST'.
There are 0 rows in 0 pages for object 'TMPL_TBOM_PART_LIST'.
DBCC results for 'TRX_CARRIER'.
There are 0 rows in 0 pages for object 'TRX_CARRIER'.
DBCC results for 'TRACKED_OBJECT_HISTORY'.
There are 18576505 rows in 922365 pages for object 'TRACKED_OBJECT_HISTORY'.
DBCC results for 'TRX_CONSUMPTION'.
There are 0 rows in 0 pages for object 'TRX_CONSUMPTION'.
DBCC results for 'TRACKED_OBJECT_STATUS'.
There are 5461496 rows in 587509 pages for object 'TRACKED_OBJECT_STATUS'.
DBCC results for 'TRX_GENEALOGY'.
There are 0 rows in 0 pages for object 'TRX_GENEALOGY'.
DBCC results for 'XFR_DELETION_LOG'.
There are 21699 rows in 279 pages for object 'XFR_DELETION_LOG'.
DBCC results for 'UNIT_CHECKLIST_ITEM'.
There are 0 rows in 0 pages for object 'UNIT_CHECKLIST_ITEM'.
DBCC results for 'XFR_EXTRACT_LOG'.
There are 7150 rows in 289 pages for object 'XFR_EXTRACT_LOG'.
DBCC results for 'DS_LIST_ITEM'.
There are 800 rows in 11 pages for object 'DS_LIST_ITEM'.
DBCC results for 'HIERARCHY_LEVEL'.
There are 10 rows in 5 pages for object 'HIERARCHY_LEVEL'.
DBCC results for 'XFR_LOAD_LOG'.
There are 0 rows in 0 pages for object 'XFR_LOAD_LOG'.
DBCC results for 'XFR_SCHEMA_OBJECT'.
There are 87 rows in 2 pages for object 'XFR_SCHEMA_OBJECT'.
DBCC results for 'XFR_UPDATE_RELATIONSHIPS'.
There are 37 rows in 1 pages for object 'XFR_UPDATE_RELATIONSHIPS'.
DBCC results for 'BOX'.
There are 305676 rows in 7968 pages for object 'BOX'.
DBCC results for 'USER_SEQUENCE'.
There are 0 rows in 0 pages for object 'USER_SEQUENCE'.
DBCC results for 'DC_dst_CorrectiveAction'.
There are 0 rows in 0 pages for object 'DC_dst_CorrectiveAction'.
DBCC results for 'ACCOUNT'.
There are 1 rows in 1 pages for object 'ACCOUNT'.
DBCC results for 'DC_dst_ShiftDefinition'.
There are 0 rows in 0 pages for object 'DC_dst_ShiftDefinition'.
DBCC results for 'DC_dst_5DX'.
There are 0 rows in 0 pages for object 'DC_dst_5DX'.
DBCC results for 'XFR_INTERVAL_ID'.
There are 10327 rows in 27 pages for object 'XFR_INTERVAL_ID'.
DBCC results for 'DC_dst_ComponentLocation'.
There are 0 rows in 0 pages for object 'DC_dst_ComponentLocation'.
DBCC results for 'PROCESS_CONTROL'.
There are 0 rows in 0 pages for object 'PROCESS_CONTROL'.
DBCC results for 'DC_dst_Account'.
There are 0 rows in 0 pages for object 'DC_dst_Account'.
DBCC results for 'REFERENCE_DESIGNATOR'.
There are 9927 rows in 51 pages for object 'REFERENCE_DESIGNATOR'.
DBCC results for 'DC_dst_PasteMeasurement'.
There are 0 rows in 0 pages for object 'DC_dst_PasteMeasurement'.
DBCC results for 'TEST_DEFINITION'.
There are 4 rows in 1 pages for object 'TEST_DEFINITION'.
DBCC results for 'DC_dst_ReportActionLog'.
There are 0 rows in 0 pages for object 'DC_dst_ReportActionLog'.
DBCC results for 'DC_dst_CAR_NCR'.
There are 0 rows in 0 pages for object 'DC_dst_CAR_NCR'.
DBCC results for 'TEST_RESULT'.
There are 10376737 rows in 199778 pages for object 'TEST_RESULT'.
DBCC results for 'DC_dst_NonConObject'.
There are 0 rows in 0 pages for object 'DC_dst_NonConObject'.
DBCC results for 'DEFECT_REPAIR_ENTRY'.
There are 3240433 rows in 169991 pages for object 'DEFECT_REPAIR_ENTRY'.
DBCC results for 'DC_dstr_UserFormAndReports'.
There are 4 rows in 1 pages for object 'DC_dstr_UserFormAndReports'.
DBCC results for 'SITE_CONFIG'.
There are 1 rows in 1 pages for object 'SITE_CONFIG'.
DBCC results for 'DC_dst_NonConformance'.
There are 0 rows in 0 pages for object 'DC_dst_NonConformance'.
DBCC results for 'BOM'.
There are 173 rows in 4 pages for object 'BOM'.
DBCC results for 'DC_dstr_GroupSecurity'.
There are 1 rows in 1 pages for object 'DC_dstr_GroupSecurity'.
DBCC results for 'DC_dst_RMA_SerialNumber'.
There are 82197 rows in 7129 pages for object 'DC_dst_RMA_SerialNumber'.
DBCC results for 'SUBROUTINE'.
There are 354 rows in 10 pages for object 'SUBROUTINE'.
DBCC results for 'DC_dst_DPMO_Information'.
There are 0 rows in 0 pages for object 'DC_dst_DPMO_Information'.
DBCC results for 'TBOM'.
There are 5139874 rows in 64048 pages for object 'TBOM'.
DBCC results for 'DC_dst_LineSchedule'.
There are 0 rows in 0 pages for object 'DC_dst_LineSchedule'.
DBCC results for 'DC_dst_ECO_Details'.
There are 0 rows in 0 pages for object 'DC_dst_ECO_Details'.
DBCC results for 'HN_dst_PartDimension'.
There are 1053 rows in 19 pages for object 'HN_dst_PartDimension'.
DBCC results for 'DC_dst_ECO_Header'.
There are 0 rows in 0 pages for object 'DC_dst_ECO_Header'.
DBCC results for 'WORK_CENTER'.
There are 0 rows in 0 pages for object 'WORK_CENTER'.
DBCC results for 'ICT_Tester_Name'.
There are 39 rows in 1 pages for object 'ICT_Tester_Name'.
DBCC results for 'WORK_ORDER'.
There are 4397 rows in 164 pages for object 'WORK_ORDER'.
DBCC results for 'DS_LIST'.
There are 72 rows in 2 pages for object 'DS_LIST'.
DBCC results for 'HN_dst_StationDimension'.
There are 1 rows in 1 pages for object 'HN_dst_StationDimension'.
DBCC results for 'HIERARCHY'.
There are 2 rows in 1 pages for object 'HIERARCHY'.
DBCC results for 'CARRIER'.
There are 0 rows in 0 pages for object 'CARRIER'.
DBCC results for 'CHECKLIST'.
There are 1 rows in 1 pages for object 'CHECKLIST'.
DBCC results for 'DBPS'.
There are 1 rows in 1 pages for object 'DBPS'.
DBCC results for 'DCS'.
There are 17 rows in 1 pages for object 'DCS'.
DBCC results for 'APP_USER'.
There are 2078 rows in 197 pages for object 'APP_USER'.
DBCC results for 'DS_OBJECT'.
There are 45 rows in 2 pages for object 'DS_OBJECT'.
DBCC results for 'dtproperties'.
There are 0 rows in 0 pages for object 'dtproperties'.
DBCC results for 'CHECKOUT_ITEM'.
There are 0 rows in 0 pages for object 'CHECKOUT_ITEM'.
DBCC results for 'FORM'.
There are 647 rows in 15 pages for object 'FORM'.
DBCC results for 'CONSUMED_PART'.
There are 0 rows in 0 pages for object 'CONSUMED_PART'.
CHECKDB found 0 allocation errors and 20 consistency errors in database 'dsActive3'.
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (dsActive3 ).
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
now the main problem is when i restore the latest backup i have. it also facing the problem. the other backup i got is one more week older than this.
can anyone help me? i cant affort to has 2 week data loss
View 12 Replies
View Related
May 22, 2007
I want to switch this setting off on all db's - that's easy.
But I presume that means the problem could occur without me knowing for weeks (maybe due to a defective disk driver). So is there a way I can schedule a maintainance task that will check for this problem out of hours? (Maybe by switching the DB option on for a while and then back off? If you switch the option on, does it check the whole database? Or does it just do checks during the actual update?) Hopefully there is a better way than that to do it...
Also, am I right in saying that CHECKSUM is new to 2005?
And what do you guys use: Checksum, Torn Page Detection or None?
View 8 Replies
View Related
Aug 13, 2007
How much of a performance impact will using Cheksum have over Torn Page Detection for Page Verify Recovery? Thanks
View 3 Replies
View Related
Jul 20, 2005
Hi all,One of my database was suspected, So I try to recover database then itgives this errorErr. 823 Torn Page Detected823, ... 24, spid51 i/o error Torn Page (Detected)during read at offset 0x0000000040e0000 in file .........How can I recover my SQL Server 2000 Database? Please helpThanks
View 6 Replies
View Related
Jul 20, 2005
I have inherited a poorly administered/maintained database thatcontains the following error:"I/O error (torn page) detected during read at offset 0x000018ee23e000in file 'F:Program FilesISSRealSecure SiteProtectorSiteDatabaseDataRealSecureDB.mdf"I do not have database backups and so therefore cannot restore fromthem. I want to move the database to a new platform and somehowrepair the torn page. Is this possible?
View 3 Replies
View Related
May 7, 2007
Are there any issues turning this ON?
I have inherited a database which started life under SQL 7 (where Torn page Detection was OFF by default), and I'd like to turn it on. Will this reshuffle all the pages to make room for the extra check-sum, or is that stored in a single block somewhere else such that it can easily be added?
Is the change going to block access for long? (DB = between 2~5GB)
Thanks
Kristen
View 5 Replies
View Related
Mar 31, 2008
we are running a maintainance plan on sql 2000 standard edition, got the error,
[2] Database db_source: Check Data Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 8928: [Microsoft][ODBC SQL Server Driver][SQL Server]Object ID 1221579390, index ID 0: Page (1:197116) could not be processed. See other errors for details.
[Microsoft][ODBC SQL Server Driver][SQL Server]Table error: Object ID 1221579390, index ID 0, page (1:197116).
Test (IS_ON (BUF_IOERR, bp->bstat) &&bp->berrcode) failed. Values are 2057 and -1.
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in table 'xxx'(object ID 1221579390).
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 2 consistency errors in database 'db_source'.
[Microsoft][ODBC SQL Server Driver][SQL Server]repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (db_source noindex).
when i run query on anlyzer select * from xxx, i got the error
Server: Msg 823, Level 24, State 2, Line 1
I/O error (torn page) detected during read at offset 0x000000603f8000 in file 'F:Program FilesMicrosoft SQL ServerMSSQLdatadb_Data.MDF'.
Connection Broken
please help. thanks
View 9 Replies
View Related
Jul 20, 2005
I got help from Dan Guzman on how to set single-user-mode.Thank you very much.After seting single-user-mode, I run DBCC CHECKDB('MYDATABASE',REPAIR_REBUILD)Tehre are error messages.How can I repair torn page problem?Thanks.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Feb 16, 2006
Hello everybody,First: SQL Server 2000 sp3a, HP cluster server, MS 2003 server,database recovery model simpleTorn page detection:When I have this option turned on, processes conected with updating andwriting in database, was MUCH more slower, than if I've this optionturned off.It seams to me, that when this option is turned on, the sqlserver ismuch more slower by any operation connected with writing, than withoutthis option.This option is required for ensurance, that the data are writtenproperly on the media.My question is:if I have my database running under cluster, with RAID hd system, whichcontains write cache, with additional checking, that the data will bewritten correctly, is it necessary for me to keep this option turnedon?Auto shrink:When it is turned on, does it affect performance?Personaly, I don't think so, but somebody is insysting on it, and Iwould like to have an information from independent source about that.Best regardsMatik
View 13 Replies
View Related
May 15, 2002
Does anyone have any experience detecting and repairing torn pages? Does Optimization repair Torn Pages ? Any help or resources would be much appriciated.
Late
Matt
View 1 Replies
View Related
Nov 11, 2015
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies
View Related
Nov 28, 2006
Hello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
View 2 Replies
View Related
Oct 16, 2006
The following objects are placed on the Report body of the Report pane of SQL Server 2005 Reporting Services :
<textbox: expression1>
<textbox: expression2>
<table:table1 with at least 30 columns and 30 expressions>
<textbox: string1> - considered as the Title in the Footer section of the report
<texbox:string2> <textbox:expression3>
<textbox:string3> <textbox:expression4>
<textbox:string4> <textbox:expression5>
<textbox:expression6>
I can't find any explanation why is it string1 and string 2 of the footer section of my report displayed separately from the expression3 which is aligned on it and the rest of the object on the second page.
The expected design is that all Footer items should be displayed together of whether it is placed on the first page or on the last page.
As a workaround of this, I converted string 1 into an expression (Added = and enclosed the string with double quote).. As a result, all of the items in the Footer section are now placed together on the last page of the report.
I also remember one of the issue I encountered before where the Footer items where placed together on the first page and still have space at the bottom of the page, but then expression 6 is forced to display (alone) on the last page of my report.
I can't find any discussion related to this, I wish somebody could give me an idea why RS behaved like this.
Thanks in advance
View 1 Replies
View Related
Feb 14, 2008
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
View 4 Replies
View Related
Jul 17, 2007
Hello,
If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11
Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header.
If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side.
Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew
View 1 Replies
View Related
Sep 21, 2006
Hi, I wanted to know that can we access a webpagefrom a store procedure in sql server 2000 like we run a exe file from sql server. Bye.
View 1 Replies
View Related
Jul 20, 2007
Hi,
I issued this command on Tempdb but it doesnot shrink the file.
dbcc shrinkfile (tempdev_3,1)
go
Messages:
-----------------------------------------------------------------------------------------------------------
DBCC SHRINKFILE: Page 4:11283400 could not be moved because it is a work table page.
-----------------------------------------------------------------------------------------------------------------------------------------------
I have checked that there are no tables associated with any user in tempdb. Any help is appreciated.
Regards,
Razi
View 15 Replies
View Related
Apr 16, 2007
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
Thanks.
DanYeung
View 8 Replies
View Related
May 26, 2008
Hi Team,
When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE
I am seeing the Body background color in between the image and page border of the page footer how to solve that?
View 1 Replies
View Related
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
May 7, 2015
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies
View Related
Mar 12, 2015
I have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.
View 0 Replies
View Related
Nov 11, 2015
How do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies
View Related
Apr 15, 2008
In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
View 8 Replies
View Related
Jan 23, 2008
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
View 6 Replies
View Related
Sep 28, 2015
I am running a DBCC SHRINKFILE on "FILE1" of a database (it has fileid = 1)...intent is to remove 70GB of file space:
DBCC SHRINKFILE (N'FILE1' , 400000).
For the SPID that's doing the shrink, In activity monitor you can see:
Waittype: PAGEIOLATCH_EX on resource: 9:3:15411328
(the DB is dbid=9)
But why does it need a page from fileid=3? Are there page dependencies between files that prevent moving a page within a given file? Does it need that fileid3 page to come along?
Its just sitting there in the SUSPENDED state for the last hour....I am going to leave it another 5 hours or so before cancelling.
The dm_exec_requests has an estimated percent complete at 83% and holding....not sure if I can believe that.
View 6 Replies
View Related
Nov 13, 2007
Hi all
I have a problem which I am really struggling with. I have a report that normally spreads over three pages. We have a list setup so that for each customer it picks up fees and expenses and displays it in sections. We have a page break after FEES so that expenses start on a new page. FEES and expenses are tables.
We need to have a page footer set for the bottom of the report but to appear on the first page only per customer. I.e. we do not want it showing on the EXPENSE pages. We have played with the IIF command but can not seem to print htis per customer only by using global variables.
=IIf(Globals!PageNumber=1,"(Please note 30 day invoice period)
The example above however only prints on the first page of the entire report. So if three customers appear then this will only appear for the first customer and I have a feeling I may not be able to link this to list.
If I can not use a page break and enter this into the list then I have a problem with the text field moving up and down depending on the size of the FEE section. For example if 5 fees are brought back then the text field will be lower then a customer that has only 2 fees.
I after a solution that can either allow my page fotter to appear every time a new customer appears on a page and hiddern for the sub sheets. Or the ability to allow my text field to start at a fixed position on my report. Has anyone had a similar issue.
thank you
Michael
View 3 Replies
View Related
