Total No Of Rows In All Tables
Feb 26, 2008Hi,
Does anyone know how to calcuate total no of rows of all tables from database in single query?
Thanks in advance
--kneel
ADVERTISEMENT
Total Record Count - Pagination With Total Rows
Jul 26, 2013My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
Total Of Previous Rows
May 13, 2008
Hi,
I have a table like this.
Portfolio
Name
Value
ALL UP
Charge Off
47
ALL UP
CLTV
212
ALL UP
DSR
441
ALL UP
Exc Total
719
ALL UP
FICO
11
I want to add a row to the bottom of the table so that it will give the total of all values above.
It's something like this.
SELECT Portfolio, Name, Value , Total
FROM table
Total is equal to sum of all above values. Can anyone help me to write this query?
Thanks
Total Of Previous Rows
May 15, 2008I have a table like this.
Name Amount
CBank 5
InstLend 4
DTC 1
Now i want write a query which give me the out put like this.
Name Amount
CBank 5
InstLend 4
DTC 1
Total 10
can any one help me to write this please?
Counting Total Rows When Using GROUP BY
Oct 20, 2007hi,
i have a stored procedure SELECT UserName AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits
WHERE (ProductID = @ProductID) AND (AnonimIP IS NULL)
GROUP BY UserName
UNION
SELECT AnonimIP AS Visitor, COUNT(VisitID) AS TotalVisit
FROM UserVisits AS UserVisits_1
WHERE (ProductID = @ProductID) AND (UserName IS NULL)
GROUP BY AnonimIP
this will return something like:
zuperboy90 - 4 visits
ANONIMOUS - 6 visits
85.104.103 - 2 visits etc
how can i count the rows returned in both selections (4+6+2 = 12) ?
thank you
Running Total On Rows Between Groups
Dec 5, 2006I want to write a stored procedure to add all of the flying time on a given airplane for each flight until now and then reset the total when it gets to a new airplane. I want to be able to pull from the table all flying time from a given date for a given airplane.
For example:
AircraftNo Date Flight_Hrs Total
38 3/1/06 1 4.5
38 5/10/06 1.5 3.5
38 7/10/06 2 2
100 8/19/03 4 8.5
100 10/04/04 3 4.5
100 9/17/06 1.5 1.5
I pulled the following code from the internet but I'm getting errors.
select AircraftNo
,Actual_departing_date,Flight_Hours
,sum(Flight_hrs) over partition by AircraftNo
order by Date
rows between current row and unbounded following) total
from (Select Distinct
F.AircraftNo
,F.Date
,C.Flight_Hrs
From GDB_01_4_Test.dbo.Flight_Log F,
GDB_01_4_Test.dbo.Flight_Cycle_Count C
Where F.Doc_No = C.Flight_log_Doc_No
Am I doing something wrong. I'm getting the following syntax errors (Using SQL 2000):
Server: Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'over'.
Server: Msg 170, Level 15, State 1, Line 18
Line 18: Incorrect syntax near 'Flight_log_Doc_No'.
Get Total Updated Rows Effected By A Statement
May 6, 2008This was a usual day today in office and i was working on a requirement in which i was needed to fetch the total number of rows effected by an update query, so I asked my best code mate "Google" and to my surprised there was not enough correct answers at least the one i was looking for.There were suggestions that you can use a select statement for the updated rows and make it like a select (count) which works fine, but just looking into the SQL server books online, it shows that there is even a better way to do it.After the update statement in my stored procedure i used "@@ROWCOUNT" with a select statement and it works like a charm.so the little find for my first ever post on asp.net is that there is a better way to find the total updated rows by a query Example: DB: Northwind , Table Employeesupdate employees set extension='1234'select @@ROWCOUNT This will return 9 (default rows in this table) as the rows effectedHope this helps
View 2 Replies View RelatedTransact SQL :: Total Count Of Table Rows
Sep 15, 2015I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
So now I have to store the count in 'nn'.
Get Total Count And Top N Rows In Single Call
Dec 3, 2007
Hi,
I want to return the total number of rows and top n records from my query. Is it possible to do this by simply running a single query. My query is dynamic so I can not create any temp table or table variables.
Bacially I want to eliminate 2 calls for sp_executesql
Set @ColumnCount = "Count(*)"
Set @Columns = " Top 100 a,b,c"
Set @Filter = "a = 1001"
Set @sql = "select " + @ColumnCount + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Set @sql = "select " + @Columns + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Thanks
Pun
Total Number Of Rows Output To A Textbox
Dec 5, 2007Hi,
Im trying to output the number of rows in a table returned in a report, into a textbox for a total record count
How would I do this ?
thanks
Display Summary Week Total Rows From Sql Database
Sep 22, 2007(I moved this thread from datagrid area) I have a sql database that has individual records consisting of name, date, hours worked among other fields.Date and name is part of a unique identifier, so there can NOT be two records for the same person for the same date. My users need a grid view that displays days worked in ONE LINE per user. I have gotten close, but can't quite get the last part. Ive tried group by, distinct, and with rollup and no luck.TABLE:dan 12/13/2012 12:00:00 AM9.123dan 12/14/2012 12:00:00 AM3.123123cara 12/12/2012 12:00:00 AM4.222cara 12/16/2012 12:00:00 AM3.3333cara 12/17/2012 12:00:00 AM2 CODE: Select distinct(name), (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Sunday')as Sunday, (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Monday')as Monday, (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Tuesday')as Tuesday, (select
(y.hours) from dbo.testtime y where y.name=YT.name AND y.hours =
YT.hours and datename(dw, date)='Wednesday')as Wednesday, (select
(y.hours) from dbo.testtime y where y.name=YT.name AND y.hours =
YT.hours and datename(dw, date)='Thursday')as Thursday, (select (y.hours) from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours and datename(dw, date)='Friday')as Friday, (select
(y.hours) from dbo.testtime y where y.name=YT.name AND y.hours =
YT.hours and datename(dw, date)='Saturday')as Saturday,(select sum(hours)from dbo.testtime y where y.name=YT.name AND y.hours = YT.hours) as Totalfrom dbo.testtime YTgroup by date, name, hours RESULTS: cara NULL NULL NULL 4.222 NULL NULL NULL 4.222cara NULL 2 NULL NULL NULL NULL NULL 2cara 3.3333 NULL NULL NULL NULL NULL NULL 3.3333dan NULL NULL NULL NULL NULL 3.123123 NULL 3.123123dan NULL NULL NULL NULL 9.123 NULL NULL 9.123 Like I said, I am SO close, I just need it to look like;NAME SUN MIN TU WED TH FR SA TOTAL cara 3.333 2 4.222 9.555
dan 9.125 3.125 12.5 TIAdan
SQL Server 2008 :: Putting Rows Together To Get Total Times
Jan 30, 2015I am building a query. I have a table with 4 columns and need to try and put the times together. There are some inconsistencies with this, and i'm hoping to exclude them.. Here is a sample table:
Function | Employee | DateTime
--------------------------------------------
1 | 1 | 1/30/2015 1:47 PM
2 | 1 | 1/30/2015 1:49 PM
2 | 1 | 1/30/2015 1:50 PM
3 | 2 | 1/30/2015 1:37 PM
3 | 2 | 1/30/2015 1:39 PM
3 | 1 | 1/30/2015 1:40 PM
4 | 1 | 1/30/2015 1:42 PM
4 | 1 | 1/30/2015 1:45 PM
Function 1 = Clock In Type 1
Function 2 = Clock Out Type 1
Function 3 = Clock In Type 2
Function 4 = Clock Out Type 2
Basically what I need to do is take the time from rows with Function 1 and match it with Function 2 so I can get a total time of the clock in. Function 3 rows need to match up with Function 4 rows so I can get another set of total times. There may be more clock in rows then clock out rows or more clock out rows then clock in rows, and there may be multiple clock ins & outs per day per employee. I'm basically trying to get totals for each Clock In/Out type.
Show Total Amount Of Rows In Specific Table
May 20, 2012I need to show the total amount of rows in a specific table?
The query is as follows:
As part of the planning process to expand the database that supports Northwind operations, the IT manager would like to know how many rows are currently in specific tables so that he can conduct capacity planning.
The results needed include two columns, TableName( containing all the tables in the database and Rows, which contain the total amount of all the rows per table).
Which Is The Most Efficient Query To Find Out The Total Number Of Rows In A Table?
Mar 30, 2006which is the most efficient query to find out the total number of rows in a table other than using - SELECT COUNT(*) ... in query
View 10 Replies View RelatedDisplaying Total Number Of Rows In A Report In Page Header.
Jun 20, 2007Hi,
I have requirement to display Total number of Rows in a Report in Page Header.
I have written the following code in Page header it shows RowCount for the Page only.
=Count(ReportItems!textboxInTableCell.Value)
Can anyone please help on this?
Regards
Raghav
SQL Call To Count The Total Rows In Table B For Each User In Table A
Jan 17, 2006I have 2 tables:
TableA:
Name
UserA
UserB
UserC
Table B:
Name Data
UserA xxx
UserB asdasd
UserB ewrsad
UserC dsafasc
UserA sdf
UserB dfvr4
I want to count the total entries in Table B for every user in Table A. The output would be:
Name Count
UserA 2
UserB 3
UserC 1
I can use a Select Count statement, but I will have to make a SQL call for every user in Table A. Also, Table A is dynamic, so the users are always changing. Can this be incorporated into one SQL call to count the total rows in Table B for each user in Table A?
Total Page Writes/total Amount Of Data Change In A Set Period Of Time
Jun 9, 2004Does anyone know how I can determine the number of page writes that have been performed during a set period of time? I need to figure out the data churn in that time period.
TIA
Aggregated Subquery - Sum Total Trips And Total Values As Separate Columns By Day
Feb 26, 2014Very new to SQL and trying to get this query to run. I need to sum the total trips and total values as separate columns by day to insert them into another table.....
My code is as follows;
Insert Into [dbo].[CombinedTripTotalsDaily]
(
Year,
Month,
Week,
DayNo,
Day,
Trip_Date,
[Code] .....
Query By Year Group By Total Students Sort By Total For Each County
Jul 20, 2005I haven't a clue how to accomplish this.All the data is in one table. The data is stored by registration dateand includes county and number of students brokne out by grade.Any help appreciated!Rob
View 4 Replies View RelatedReporting Services :: SSRS Group Total Expression - Add Total Disabled
Oct 26, 2015For some reason my Add Total is grey out, when i tried to add grand total using some expression.
I have two row & two column groups?
Is there any alternative or how can i enable add total? using expression..as you can see in my Attached Image
I'm using iff condition in my expression..Â
SQL Server 2008 :: Pulling Daily Total From Cumulative Total
Jun 28, 2015I have a table that writes daily sales each night but it adds the day's sales to the cumulative total for the month. I need to pull the difference of todays cumulative total less yesterdays. So when my total for today is 30,000 and yesterday's is 28,800, my sales for today would be 1,200. I want to write this to a new field but I just can't seen to get the net sales for the day. Here is some sample data. For daily sales for 6-24 I want to see 2,000, for 6-25 3,000, 6-26 3,500, and 6-27 3,500. I'm thinking a case when but can't seem to get it right.
CREATE TABLE sales
(date_created date,
sales decimal (19,2))
INSERT INTO sales (date_created, sales)
VALUES ('6-23-15', '20000.00'),
('6-24-15', '22000.00'),
('6-25-15', '25000.00'),
('6-26-15', '28500.00'),
('6-27-15', '32000.00')
Adding Subreport Total To Main Report Total
Apr 28, 2006Hi, can anyone help?
I have created a Report using Visual studio-the report displays a subreport within it.
On the Subjective Report I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value), and I
have named this text box €™SubRepM1€™
The name of the subreport is €˜subreport1'.
On my Main Report, again I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value)*-1, and I
have named this text box 'MainRepM1'
The name of the main report is 'GMSHA Budget Adjustment Differentials'
The report displays both of the subreport and main report values
but I now need to total these values together for each month in order to
produce a grand total.
I have tried using the following to add the totals for Month 1 together,
=subreport1.Report.SubRepM1 + MainRepM1
but this does not work and I get the following error message €˜The value expression for the text box 'textbox18'contains an error [BC30451] Name subreport1 is not declared'.
I feel that it should be a simple matter of adding the two sets of values together but I€™m having major problems trying to get these totals to work.
Can anyone help, thanks
Total Spaceused And Total Allocated
Jul 20, 2005Anyone has a "one sql statement" to get the total spaceused and totalspace allocated of an instance ? ie same as sum of relevance fieldsfrom sp_spaceused for each database in an instance, that works accrossversion of mssql from 6 onward.ThanksKD
View 1 Replies View RelatedDeleting Rows From Many Tables
May 19, 2006What I'm trying to do is delete a user and all their related information within the other tables. I'm not wanting to delete the table, just one column with that user and their related information. So my Primary_Key is UserID within the table [alumni] and my three Foreign_Keys are CommentID, PhotoID, and AlbumID within the tables [comments], [photos], and [albums]. Here is some of the code that I have:
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:SoderquistString %>"
DeleteCommand="DELETE FROM [alumni] WHERE [UserID] = @UserID"
SelectCommand="SELECT [UserID], [UserName], [FirstName], [LastName], [State] FROM [alumni] WHERE ([State] = @State)">
<DeleteParameters>
<asp:Parameter Name="UserID" Type="Int32" />
</DeleteParameters>
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="state" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
The users are set up in GridView form. Is there some type of DELETE command that I need to be writing that is different than the one above? I have tried adding onto the following DELETE statment:
DeleteCommand="DELETE FROM [alumni] WHERE [UserID] = @UserID
DELETE FROM [photo] WHERE [UserID] = @UserID;
DELETE FROM [album] WHERE [UserID] = @UserID;
DELETE FROM [comment] WHERE [UserID] = @UserID;
...but that doesn't work...and doesn't look right. I would really appreciate anyones suggestions or help that you may be able to provide. Thank you!
Count Rows In All Tables In A Db
Mar 1, 2001Hello,
Do anyone knows how can i count rows in all the tables in a database.
With select count(*) I can count rows only from one table .
TIA.
Compare Each Rows In Two Tables?
Nov 16, 2011I need to compare two tables in each row. the tables are as follows:-
Table a:
Code:
IDFirst_Name Last_name Birthdate
1Shradha Deshkmukh 1981-12-25 00:00:00
2Shradha Verma 1981-05-11 00:00:00
3Divya Dutta 1982-07-21 00:00:00
4Matthew Palmer 1983-12-28 00:00:00
table d:-
Code:
idfnlndob
1ShradhaTiwari1981-12-25 00:00:00
2DivyaDutta1983-07-21 00:00:00
3SulabhManesar1975-09-11 00:00:00
4MatthewPalmer1983-12-28 00:00:00
5SamuelMaxwell1984-05-22 00:00:00
I want to compare the tables using first name, and I have a log variable which I want to have the value as per the differences in the table that is if the first name matches and second name and dob dont match it shows log value for that FN as 'LN and DOB dont match'.
similarly if First name matches and dob matches then @log is 'LN not match'.
And in case all three match it should show 'match'as log value.The query I use is a s follows:-
Code:
USE testing
GO
DECLARE @NR int
DECLARE @log varchar(200)
SELECT @NR = COUNT(*) FROM a
WHILE @NR>0
[code]...
the result I am getting is :-
Code:
fnlndob (No column name)
ShradhaTiwari1981-12-25 00:00:00match
ShradhaTiwari1981-12-25 00:00:00match
DivyaDutta1983-07-21 00:00:00match
MatthewPalmer1983-12-28 00:00:00match
I have tried using CASE but that doesnt work either.
Return Tables With 0 Rows
Nov 20, 2006Hello All
Please can anyone advice me how I can fetch list of all tables which have no records in it in sql server
Thanks
Append Rows In 2 Tables
Oct 8, 2007how to append rows of 2 tables. Each table consist only 1 row.
sample:
table1
f1 f2 f3
table2
g1 g2 g3
my expected result is:
f1 f2 f3 g1 g2 g3
Note: tables have no relation to each other...
thanks
RON
________________________________________________________________________________________________
"I won't last a day without SQL"
Rows In Database Tables
Jan 14, 2008This is a question that I have not had an opportunity to test. Was wanting to know if anyone in the SQl world knows the answer. In SQL 2K and 2005 your rolls are limited to 8060 bytes without using varchar(MAX). My question is do you have to specify varchar(max) before your roll can exceed 8060 or does SQL 2005 exceed without specifing varchar(Max). Also does it expand it across multiple pages automatically. Please assist if you can.
Thanks
Duplicate Rows But No Key On The Tables
Jul 23, 2005Dear All,I have a table with 10 billion records but there are no key on it. I cannotbuild a key on it as it is the data source.However, the data source exits the duplicated rows.I have used the DTS to transform the data into a new table and delete theduplicated rows. As there are 10 billion records, i need to divide it into 3parts and also the process lasts for 6 hours each part.I want to ask is there any other good methods to slove my problem??ThxEsther
View 1 Replies View RelatedHow To Count Rows From Two Different Tables
Feb 29, 2008If I have the following tables:
ID Car
1 Mazda3
2 Miata
Color Car ID
Black 1
Silver 1
Black 2
Style Car ID
i 1
s 1
touring 1
What is the simplest query that will return a result set like:
Car # of Colors # of Styles
Mazda3 2 3
Miata 1 0
How To Delete Rows In Tables...
Jan 25, 2007I need to delete some rows in some of my tables after tranfering data from my OLTP to SQL database.
Im using SQL 2000
I have tried with the following:
Delete from fsalesinvoiceline
Join dsalesinvoiceheader on
Fsalesinvoiceline.salesid= dsalesinvoiceheader.salesid and
Fsalesinvoiceline.company= dsalesinvoiceheader.company
Where dsalesinvoiceheader.billtocustomerno=€™INDTAST DEBITORNUMMER€™
Go
Delete from dsalesinvoiceheader
Where dsalesinvoiceheader.billtocustomerno=€™INDTAST DEBITORNUMMER€™
I get the following error message:
[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near the keyword 'JOIN'
What am I doing wrong?
/Søren D. Jensen
Insert Rows Into Four Tables At One Time
Nov 14, 2007Hello,I have 4 tables having Customer, Customer_personal_info, Customer_Financial_info, Customer_Other_infoIn this Customer table had a primary key CustomerID , related with every other table with fkey.I want to insert data into four tables using one form having TABs .I created class and storedProcedures to insert row for each table.How to execute all four classes using beginTrans-commitTrans-Rollback-EndTrans. Thanking you,
View 1 Replies View Related