Tranaction Log Error- Can Someone Tell Me If This Error Was My Fault
Apr 16, 2007
Hi everyone:
We received a error message "Log File to Database is Full. Backup the
transaction log to free up space."
I have a Access 2000 application that calls a Stored Procedure that
inserts about 5000 records into a worktable on a SQL server 8.0
database table. After the user is finished with the work table a
stored procedure deletes just the records that he was using in the
work file (so I can't use Truncate Table). I have the work table
linked to an Access database so I can't use a temporary table on the
server.
This action of 5000 records being added and deleted to this workfile
can occur 7 or 8 times an hour. And for the last week I've been
testing the application so I have probably been doing this action 10
to 20 times an hours.
I do not currently use a COMMIT with the INSERT Stored Procedure or
the DELETE Stored Procedure.
Although I didn't think this was a lot of records, could it be that my
application caused this error. Is there a way to find out for sure if
my application caused this error and if there something I can do in my
application to keep the Transaction Log from filling up.
Thank you for taking the time to read my post and any help would be
appreciated.
View 3 Replies
ADVERTISEMENT
May 21, 2006
When I open my Computer Management Console and look at Event Viewer/Application, I see an error:
Fault bucket 277816039.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20 Bucket:
0008: 32 37 37 38 31 36 30 33 27781603
0010: 39 0d 0a 9..
What is this error and how can I fix it?
Also, When I click on the link to get more information all I get is a page that says there is no information on this error. This happens with ALL my errors! I have never seen any usefull information from this link.
I am running on a Windows 2004 Standard Server with SQL Server 2005.
Charles
View 5 Replies
View Related
Aug 14, 2005
I am trying to restore a Transaction Log in SQL Server 2000 in Full recovery status, However I was received the following error Message:--------------------------------------------------------------------------------------------------------------------------------------Error message: Exclusive access could not be obtained because the database is in use.--------------------------------------------------------------------------------------------------------------------------------------Also I changed the UserAccess database from MULTI_USER to SINGLE_USER, but still do not work and shows the same error message.Please let me know, if you have any solution for this problem.Thanks,
View 1 Replies
View Related
Apr 13, 2007
Hi could yous please help.
Our IT guy has left our company so I’m doing the IT for the moment so know very little about sql server.
I have been backing up our database using enterprise manager and doing a complete backup, which I thought was the right way to do it.
We have recently had problems with lack of disk space. An external engineer said that this problem has been caused due to the fact that I am not backing up properly, as I am not backing up and flushing the transaction log. Apparently I’m just backing up the structure of the database and not the data
When I do a backup through Enterprise manager and do a complete back up, does this not back up the transaction log and flush it?
They also told me that the only way to flush the transaction log is to by a separate application like Veritas back up exec to do this.
Could you please help and explain what they mean, are they right?
Thanks
View 2 Replies
View Related
Apr 9, 2008
Hi,
Can some one let me know the differencies between different Backup models. Full, Differential and Transactional. I am more confused, when to use the Differential and Transactional log backups? How they both differ?
How the backup models depend on the database recovery model? Can i recover my database if my database recovery model is SIMPLE using a FULL backup?
I would appreciate if someone can explain it with an example and share the best practices.
Regards,
-Aazad.
View 11 Replies
View Related
Jun 12, 2007
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
View 3 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Dec 13, 2007
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
View 1 Replies
View Related
May 20, 2008
We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
Please help.
View 1 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
Apr 9, 2008
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.
Thanks!
Terry
View 4 Replies
View Related
Apr 3, 2007
This has worked fine for weeks, and months.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
View 1 Replies
View Related
Feb 18, 2007
My link server was working just fine until friday evening.
It stopped worked over the week end.
with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine
--TNS names looks fine
---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
View 7 Replies
View Related
Feb 14, 2007
Hi,
I'm using SqlServer 2000 at a web host, and share this db with about 200 others (it's an inexpensive web host so I guess there is not very much traffic on most of them, but I can only see their db IDs so I don't know what organisations they are or the urls they have).
Usually, my web site runs fine, but lately it's really really slow (as in non-functioning in reality). I'm in the middle of coding my seach functionality, so I fear that I'm causing this myself. ;-)
However, there are only ten posts in my test db, so it should be a piece of cake for SqlServer. The other .aspx pages runs rather slow too now, but when I start a programming session they have worked fine (this has happened three times now so I don't know what to conclude). When the server slows down, it can stay down for hours. I've also tried to access my site from other computers but get the same result, so I guess it has nothing to do with caching (I also tried emptying my browser's - IE7 - cache). I have several asp web sites with Access dbs at the same web host, and they all work fine. In addition, I have no problem viewing and editing my db at the web host via SqlServer Management Studio Express.
What do you think of this problem? Should I go for a more expensive web host? Should I give them the "It's not you, it's me" speech? ;-) Or is it really me?
Below's my search code, and as you can see, there are some integers there to make sure the loops don't run ad infinitum. I don't really think the problem actually lies with my search code, as everything worked well a week ago, but I don't know...
BTW, if you think my code can run much faster without getting too tricky, please let me know.
Please help!
Pettrer
If Page.IsPostBack Then
Dim soktext As String = Trim(SokTextBox.Text) + " "
Dim tillagg As String = ""
Dim varv As Integer = 1
Dim loopvarv As Integer = 0
soktext = Replace(soktext, vbCrLf, " ") 'vbCrLf = mellanslag i VB-terminologi
Do While InStr(soktext, " ") And varv < 100
soktext = Replace(soktext, " ", " ")
loopvarv += 1
Loop
While Trim(soktext).Length > 0 And varv <= 20 'Loop för att identifiera ord och lägga till dem i sqlsatsen, ett i taget
Dim icke As String = " "
Dim ordet As String = soktext.Substring(0, soktext.IndexOf(" ")) 'Det godkända ordet läggs till i tmp-strängen
soktext = soktext.Remove(0, soktext.IndexOf(" ") + 1) 'Tar bort det som just använts (eller varit för kort)
If ordet.Length > 1 Then 'Blanksteg och ensamma bokstäver förhindras att komma med i sql-satsen
If ordet.StartsWith("-") Then 'Det är ett minusord
icke = " NOT " 'I sqlsatsen blir det alltså AND NOT (...)
ordet = ordet.Remove(0, 1) 'Tar bort minusttecknet från söksträngen
End If
tillagg += " AND " & icke & " (artistnamn LIKE '%" & ordet & "%' OR " & _
"beskrivning LIKE '%" & ordet & "%' OR " & _
"kulturhemvist LIKE '%" & ordet & "%' OR " & _
"kontaktnamn LIKE '%" & ordet & "%') "
End If
varv += 1
End While
Dim kat As String = ""
If KategoriDropDownList.SelectedValue <> 0 Then
kat = " AND (kategori1 = " & KategoriDropDownList.SelectedValue & _
" OR kategori2 = " & KategoriDropDownList.SelectedValue & _
" OR kategori3 = " & KategoriDropDownList.SelectedValue & _
" OR kategori4 = " & KategoriDropDownList.SelectedValue & ") "
End If
Dim lan As String = ""
If LanDropDownList.SelectedValue <> "alla" Then
lan = " AND lan = '" & LanDropDownList.SelectedValue & "' "
End If
ResultatDataSource.SelectCommand = "SELECT DISTINCT TOP 200 folknuID, kategori1, kategori2, kategori3, kategori4, initial, artistnamn, lan, kontakthemsida, kategori1, (COALESCE(audio1,'') + COALESCE(audio2,'') + COALESCE(audio3,'')) As audio, (COALESCE(video1,'') + COALESCE(video2,'') + COALESCE(video3,'')) As video, (COALESCE(pressbild1,'') + COALESCE(pressbild2,'') + COALESCE(pressbild3,'')) As pressbild " & _
"FROM Mytable " & _
"WHERE shown = 1 AND shownadm = 1 " & _
tillagg & _
kat & _
lan & _
"ORDER BY initial"
ResultatLabel.Text = "SelectCmd: " & ResultatDataSource.SelectCommand
ResultatGridView.DataBind()
End If '*** på sökkoden
View 7 Replies
View Related
Jul 10, 2001
We are setting up a new SMS (SP3) primary server with local SQL 7.0 (SP3) and are mandated to use the following configuration for hard drives:
C:&D: are on mirrored 18GB drives (2 channel RAID controller)
C: OS (8GB) partition
D: pagefile & temp (10GB)
E:&F: are on RAID 5 (3x36GB) 72GB useable (2 channel RAID controller)
E: temp data for field techs (10GB)
F: SMS & SQL (62GB)
We would like to have the SQL logs on a different physical drive than the data (for improved performance), so we are planning on putting it on drive D:
We realize this will affect redundancy, but should this be a big concern?
Has anyone used this type of configuration?
Pros, cons?
Any help would be appreciated.
Thanks
Brent
View 2 Replies
View Related
Jan 5, 2002
Hi,
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?
For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)
I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.
for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.
for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Please advice how to get rid of this problem.
Thanks in advance,
Anu
View 4 Replies
View Related
Oct 10, 2007
where can i find it?
thanks
View 4 Replies
View Related
Mar 23, 2000
I just installed SQL7.0 on a windows 98 machine. When I go to register a new database, I get the following message.
MMC caused a general protection fault
I have rebooted the machine, removed & reinstalled the application.
Help - what else
View 1 Replies
View Related
Jun 16, 2008
Hello All,
We have to setup a SQL 2000 box (it's what the app requires) and I would like to know what is considered the best practice for setting up the drive fault tolerance.
We are looking at allocating about 500GB for both system and data drives.
Thank you in advance for your input.
Sincerly,
Larry
View 1 Replies
View Related
Mar 13, 2007
Goodday all
I,m having a problem with something that worked well just recently. maybe I changed a setting by mistake.
I have a Database grid view on my page. When I configure my data sourse and get to "configure the select statment " on the wizard and press advanced to open the wizard with two check boxes " generate INSERT, UPDATE etc and the other check box "Use optimistic concurrency " this input box of the wizard is greyed out (non responsive)
Does anyone know how to rectify this?
Regards
Rob
View 1 Replies
View Related
Jun 17, 2006
Hi,
My raid-5 server failed because one disc, some folders and files are lost, but I have recoverd whit some software for the propuse.
I have reinstaled the SQL server and attached the database, but when I try to open the tables I recieve a error message saying : internal consisty error... somethihg like this.
How can a restore the databases?
View 3 Replies
View Related
Nov 18, 2005
Dear All,
I’m wondering if it’s the design that needs to be changed or I simply can’t put this together.
I have 3 tables.
1. people (peopId, peopFName, peopSName etc.)
2. codes (codeId, codeName)
3. codedPeople(codePeopleId, peopId, codeId)
Codes represent different skills of people, example the sort of job functions they’ve held in their employment. Like:
t-CEO,
t-CFO
t-Founder
etc.
people, clearly holds data about people.
CodedPeople holds data about which people are coded. So person1 can be coded as t-CEO as well t-Founder, and person2 coded as t-CFO
What I need is a query that returns all distinct people records and takes a number of codeNames as input. So if I throw in t-CEO OR t-Founder I get person1, again if I define t-CEO AND t-Founder I get person1.
However when I add t-CEO OR t-CFO I get person1 and person2 but when the query takes t-CEO AND t-CFO I get no result.
I can’t seem to come up with anything that would give me a good starting point. Is there a design fault here? All opinions are much appreciated, thanks in advance!
View 3 Replies
View Related
Apr 8, 2008
I am getting a general protection fault when pressing the print icon in Reporting Services website.
Hi I found this article:
http://database.ittoolbox.com/groups/technical-functional/sql-server-l/reporting-services-2005-print-icon-causes-machine-to-reboot-1592477
but I can't figure ou how to "remove" the RSClientPrint Class add-on in IE 6.
P.S.
Why does something as simple as printing need to be an ActiveX control? There are all kinds of issues revolving around pushing this out using SMS for users without local admin permission.
View 4 Replies
View Related
Jan 10, 2008
Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that.
Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
Step : 3 Push From Mobile
Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);
So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
View 7 Replies
View Related
Jan 28, 2008
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
View 4 Replies
View Related
May 6, 1999
We are encounrtering a strange error in out sql error log:
source: ods
error: 17824, severity 10, state 0
source: ods
unable to write to ListenOn connection '.pipesqlquery', loginname 'op', hostname 'BOR0181'
This error occurs multiple times per day from several client stations.
It started when we enabled replication on that server, and started replicating the whole database to another server.
Can somebody give me an idea on what the problem could be ?
Bart Roelant
Capsugel Belgium
View 1 Replies
View Related
Oct 6, 2006
I got the following error
Error: 823, Severity: 24, State: 4
I/O error 33(The process cannot access the file because another process
has locked a portion of the file.) detected during write at offset
0x0000000a796000 in file xxxxxxxxx.mdf'.
What happend with my database?
View 1 Replies
View Related
May 7, 2008
Hello there,
I've some really big problems with SQL Server 2005 Express. I Recently, I had 2 instances on my machine, one was a SQL Server 2000 Developer and the other a 2005 Express Version. The 2000 version was not necessary anymore, so I unstalled it, since then, the Express version keeps having probems.
Under the Server Properties -> Database settings -> Database Locations I've changed the path to D:sqldatamssql, but now, the programm always takes the "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" to store and load the databases, no matter what I do.
And there are more problems see here:
Restoring does not work=======================
I wanted to restore a database called "fw40_admin" from a backup file (.bak), but that didn't work at all, it always says this as an error:
"System.Data.SqlClient.SqlError: The operating system returned the error '5(error not found)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'D:sqldatamssqlfw40_admin.mdf'. (Microsoft.SqlServer.Express.Smo)"
But as soon as I type in the installation path "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData" inside the "Restore As" under "Options", it works.
Why does the backup only work in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData", BUT the database locations under the server properties is indicated with "D:sqldatamssql"????
Attaching does not work=======================
Attaching an existing database does not work either. Most databases (mdf) are located on the path D:sqldatamssql, but as soon as I press
Attach Databases -> Add
The dialog window appears with the "D:sqldatamssql" path, but it is unable to find any *.mdfs altough THERE ARE .mdfs in this directory. But Express can find databases in the selected installation: "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData".
Why can't Express see the directory on the D: partition???
What is wrong? Here? Can anybody help me?
View 5 Replies
View Related
Mar 1, 2007
Hi,
I am trying to connect to my SQL Server 2005 but it gave me following error message.
TITLE: Connect to Server
------------------------------
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
So, Please help me to solve this problem.
tnks.
View 20 Replies
View Related
Mar 22, 2007
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
View 3 Replies
View Related
Apr 10, 2007
I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend.
The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests.
Error Details:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My problem is this:
1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed.
2) The error comes only at irregular intervals. Users are able to login properly otherwise.
3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server.
4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000.
5) Error does not come on any specific page; or any specific code; or at any specific time.
6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.
Any thoughts on why is this happening, and how to resolve this?
View 10 Replies
View Related
Sep 27, 2007
Hello,
I am having a crystal report using datastored in a dataset. When I select one of items in a dropdownlist, it gives me this error message. Note that I used that code before in another web page using a different crystal report and a different dataSet and it worked successfully, but this time it doesn't work....anyone can tell me what causes this error and how to solve it???
NOTE: I am using a vb code behind in my .aspx page
Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt:
Error in formula <Record_Selection>.
'{StProd2.ItemDescription}'
The result of selection formula must be a boolean.]
.F(String , EngineExceptionErrorID
)
.A(Int16 , Int32 )
.@(Int16 )
CrystalDecisions.CrystalReports.Engine.FormatEngine.GetPage(PageRequestContext reqContext)
CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext)
CrystalDecisions.Web.ReportAgent.u(Boolean N)
CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Page.ProcessRequestMain()
View 1 Replies
View Related
