Hi,
I am trying to setup Trans Replication with updating subscriber on sql2000. One column on few tables got data with single quote (').
How do I handle in this case? Did any one come across such case?
Can I Change default QUOTED IDENTIFIER from ' (single quote) to something else (@@@) on SQL2000?
If yes, how to do?
Thanks
mka
Is it possible to replicate data from 3 publishers to a single/central subscriber transactionally? In other words I have Server A, Server B, Server C with databases A,B,C respectively. I need to replicate 2 articles from A,2 from B and 2 from C to a central Server D that hosts database D. D will have only 6 articles. The replication is Transactional Replication.
If it is possible what will be the drawbacks of such implementation? (if one server goes down will the whole replication break?) If not possible then what is the best way of implementing this?
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedAfter testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
HI,I anm geting error when i want to store some text which contens single quote like this Hi I am 'santosh'.as i am using text editor which genetates XML data (not pure) so i have used varchar(max) to store the data but it gives error.
Is thier any way to store text with single quote........
urgent plz.
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedAdvance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedHey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View Related I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks
View 6 Replies View RelatedHi,
We have an existing merged replication schema that works well. One of the
tables is named audit. Currently this is a bidirectional transfer. However,
we want a new audit table that will transfer data from the subscriber to the
publisher and not the other way round. I have a script that was generated as a backup script when replication was first created. I have no idea which parameter to change in order to have the merge replication going from subscriber to publisher. Any advise is helpful. Thanks.
I would like to know how to translate a numeric value = 3 to a text or char value = 03.
Any input would be appreciated.
Thanks,
Joel
Thanks in adance
Platform: SQL 2000
A SQL table has a field named "pay-day" with Char(8) data type.
I tried to change its data type to datetime but only with an error message like this. I did right-click the table and tried to modify a data type.
- Unable to modify table.
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
Jay
Anything I can use in SQL2000 in place of varchar(max) (only in SQL2005) with a 2 GB-per-instance capacity
DECLARE jkcursor CURSOR
READ_ONLY
FOR SELECT top 100 episodeid,episodedate,journalentry
FROM ccnidcdw.[Pre-AuthThin].dbo.tbljournal
WHERE journalentry like '%CoCustServ%'
DECLARE @episodeid varchar(15), @episodedate datetime, @journal varchar(2gb)
OPEN jkcursor
FETCH NEXT FROM jkcursor INTO @episodeid,@episodedate,@journal
WHILE (@@fetch_status = 0)
BEGIN
print @journal
FETCH NEXT FROM jkcursor INTO @episodeid,@episodedate,@journal
END
CLOSE jkcursor
DEALLOCATE jkcursor
thanks
I have the merge replication (Push)Â for SQL Server 2008.The right-click option for Start and Stop Synchronizing in subscriptions has been disabled. How can I stop the merge replication and start again ?
This error happened 1 week after I created the merge replication. The merge data cannot sync to subscriber and only solution I can use is drop and re-create the merge replication again but error would be re-occur a week later. The merge replication work fine before and start from middle on May 2015, but it keep happen right now.
How to speedup data from subscriber to Publisher on Merge replication?
Is there any we can speed up data from Subscriber to Publisher (uploading).
Subscriber downloading data from publisher running more than 20 hours after drop and recreate subscriber.
Could you please post reply.
Regards
Ponnu
Hi,
Does anyone know how to deal with image data type within stored procedure when using SQL2000?
I have a table and there is an image data type column. In this table I need to make a copy of one row within a table through a SP /it means to retrieve the whole row within SP, change another columns data (but, that the image is not modified) / and save the modified row back to the same table.
Problem is, that within SP is not alowed to use local varaibles of image data type. Does anyone know a solution for this? Please.
Thank you.
Hi All,
I am new to MSSQL Server 2000. I am sorry if you think that this is silly question.
What is the difference between identity – yes and yes(not for replication)
What are two different situations where I should use identity – yes or identity - yes(not for replication)
Thanks in advance
rainbow11
Hi
I am new to Sql server and had just finished the MErge Replication setup on one of the PRoduction server. Today I got the request to change one of the Datatype of one the Published Article. Please help as what are the correct step to make it happen. Is there any production downtime required and if yes , then how much.
Thanks in Advance
Sanjay
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Sql Server 2000
I am looking for bidirectional transactional replication using updatable subscribers (queued or immediate) . Is it possible to replicate the image data from the updatable subscribers to the publisher. I understood that the Image data can't be replicated to the publisher from the updatable subscriber. I am not using the WRITETEXT or UPDATETEXT. I am using just INSERT and UPDATE for image data type transactions.
Any thoughts on this is greatly appreciated.
Thanks in advance
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedHi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
I ran a large query and exported it to xls. In Excel, I noticed a value of '2.00E+01'. I formatted the Excel cell and then got a value of '20'. I searched for the record in SQL Server 2008, ya I know, ancient. The value is '2E1' which excel is seeing as scientific notation.
Can I use a case statement that when an 'E' is present to add a single prefix quote like '2E1? Or perhaps do it for the whole column? Or put put double quotes around the whole field?
How do I insert a single quote ' into a table? For example:Insert mytable values (1,''')I get an error message.Any ideas? The server does not recognize double quote (why? is thistsql, ansi?), otherwise I could have written it as:Insert mytable values (1,"'")Thanks.
View 4 Replies View RelatedI am using SQL Server 2005, I have a NVarChar parameter called @Text that I use to build a dynamic Where clause for my SELECT Statement.
SET @l_Where = @l_Where + N' AND (StatusDesc LIKE ''' + Replace(@Text, "'", "''") + N'%'')'
This gives me an invalid column error.
How do I replace the single quotes in @Text with 2 Single Quotes?
TIA,Jason
I have 2 SQL 6.5 databases on separate servers. Server A replicates a text field into a table on server B.
On server A the field contains text similar to THIS IS FRED'S HOUSE. After replication to Server B it looks like THIS IS FRED''S HOUSE. The distribution database also has it as THIS IS FRED''S HOUSE. Using ODBC trace I cannot see the value being passed in the text field as it is displayed as a question mark e.g. ?.
How do I fix the problem ?
Thanks
How do I update a record with a string containing a single quote ' ???
SET Row=' charlies' dilemma ' doesn't work since the string gets cut in half
Hi everyone -
Here is the setup -
new install, same old software
only difference is the machine name has
a single quote (apostrophy) in the name...
xyz's
Now - a portion of the application is failing -
the starting of the application runs ok,
and the system is indeed seeing the database
(it allowed the user to log in)
so the connection string seems to be ok - just in that
one part...
does anyone know if the machine name with an embedded
apostrophy will cause the ADO connection string to puke???
vb6
MSDE
thanks
tony
Hi,
I am trying to concatenate single quotation mark (ie- ' ) in the select query but not succeed.
If I concatenate word India's, how should I have to write the select query..?
Its just query I have not concern with any specific database.