Transact SQL :: CASE Expression In WHERE Clause?

Nov 6, 2015

I have a scenario where the End User is going to select two parameters.  @AgentID and @Location If the End User selects @AgentID parameter, in my WHERE clause, I do not want to check the location condition. By default, the agent knows their location already.

If the End User select @Location parameter, in my WHERE clause, I still want to check the Agent condition.

@AgentID parameter would populate either with "All" or their actual agent# (76754 for example).

@Location parameter would populate either with "All" or their actual location (Birmingham or Bessemer for example)Sample of my current WHERE clause:

WHERE
 
 gl.ReceiptDate >= @BeginDate and gl.ReceiptDate < DATEADD(D,1,@EndDate)
 AND gl.AgentId = CASE WHEN @AgentID = 'All' THEN gl.AgentID ELSE @AgentID END
 AND gl.Location = @Location

View 9 Replies


ADVERTISEMENT

Transact SQL :: CASE Expression - NULL

Jun 19, 2015

DECLARE @I1 VARCHAR(5),
@I2 VARCHAR(5)
;
WITH cte
AS (SELECT 1 AS i,
'val1' AS j UNION ALL
SELECT 2,
'val2')

[code]....

Why @i1 is null but not @i2 ? I'm trying to assign values after grouping by the column.

View 17 Replies View Related

Transact SQL :: Case Statement In Update Clause

Jun 4, 2015

I have used the below update query. However, its updating only the first value. Like its updating AB with volume when c.Type  = ABC, similarly for CD. Its not updating based on the 2nd or the next case condition.
 
Update XYZ Set AB = a.Amt * (CASE WHEN c.Type = 'ABC'  THEN  (c.volume)
 WHEN c.TYPE = 'DEF'  THEN  (c.volume)
 WHEN c.Type = 'GHI'  THEN  (c.volume)
 Else 0
 END),
 CD = CASE WHEN c.Type = 'MARGIN' THEN '4105.31'
 WHEN c.Type = 'ABC' THEN '123.1'
 WHEN c.Type = 'DEF' THEN '234.2'
WHEN c.Type = 'GHI' THEN '567.1'
END
 from table1 a join table2 b
 on a.Cust = b.Customer
 join table3 c
 on b.account = c.account and b.channel =c.channel

Why its not working properly? But if i use Select statement instead of update query its working properly.

View 18 Replies View Related

Transact SQL :: Finding Syntax To Combine IN And CASE In A WHERE Clause?

Oct 29, 2015

I cannot seem to find the syntax to combine IN + CASE in a WHERE clause

WHERE
ses.BK_MS_SESSION <= '2015-03'
AND vis.CAT_DRAW_STATUS =
(CASE ses.BK_MS_SESSION
WHEN '2015-03' THEN vis.CAT_DRAW_STATUS
ELSE
CASE stat.BK_MS_VISIT_STATUS
WHEN 'T' THEN 'X'
ELSE vis.CAT_DRAW_STATUS
END
END
) IN ('D','R')

View 7 Replies View Related

Transact SQL :: Case In Where Clause With Column Comparison With Greater Than Or No Filter

Sep 24, 2015

For Below example when @x=1 to retrieve col>0 rows or all rows.

With out another if else blocks or Dynamic sql to solve only in where clause.

select 0 col into #x
union
select 1 col
union
select 2 col

declare @x INT =1
SELECT * FROM #x
where col>CASE WHEN @x=1 THEN 0 ELSE (col=col) END

--here in case i want to compare only when @x=1 then col>0 other wise select all rows with out filter

View 5 Replies View Related

Transact SQL :: Case Statement In Where Clause - Select First / Default Value If Two Different Value Exists

Nov 16, 2015

I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.

Store     Type    Sales
11           A        1000
23       A      1980
23       B       50
5         B      560

I want to filter the store in "where clause"  where

1)- if the store has type A and  B, then assign only A
2)- if the store has  type A associated with it then assign A
3)- if the store has type B associated with it, then assign B.

Select Store, sum(sales), Type
from table1
where (TYPE]=  (case when [TYPE] in ('A','B') then 'A'
when [TYPE]='A' then 'A' else 'B'end))
GROUP BY [store], [TYPE]

The above statement is not working for when store has only Type B associated with it.

View 7 Replies View Related

Expression Defined In SELECT Clause Overwrites Column Defined In FROM Clause

May 14, 2008

2 examples:

1) Rows ordered using textual id rather than numeric id


Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
order by
v.id






Result set is ordered as: 1, 11, 2
I expect: 1,2,11


if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.

2) SQL server reject query below with next message

Server: Msg 169, Level 15, State 3, Line 16
A column has been specified more than once in the order by list. Columns in the order by list must be unique.




Code Snippet
select
cast(v.id as nvarchar(2)) id
from
(
select 1 id
union select 2 id
union select 11 id
) v
cross join (
select 1 id
union select 2 id
union select 11 id
) u
order by
v.id
,u.id




Again, if renamed or removed alias for "cast(v.id as nvarchar(2))" expression then all works fine.

It reproducible on

Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)


and


Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)

In both cases database collation is SQL_Latin1_General_CP1251_CS_AS

If I check quieries above on database with SQL_Latin1_General_CP1_CI_AS collation then it works fine again.

Could someone clarify - is it bug or expected behaviour?

View 12 Replies View Related

Transact SQL :: How To Create UNION Clause With Two Queries That BOTH Have WHERE Clause

Nov 4, 2015

I have a quite big SQL query which would be nice to be used using UNION betweern two Select and Where clauses. I noticed that if both Select clauses have Where part between UNION other is ignored. How can I prevent this?

I found a article in StackOverflow saying that if UNION has e.g. two Selects with Where conditions other one will not work. [URL] ....

I have installed SQL Server 2014 and I tried to use tricks mentioned in StackOverflow's article but couldn't succeeded.

Any example how to write two Selects with own Where clauses and those Selects are joined with UNION?

View 13 Replies View Related

Transact SQL :: Upper Case To Lower Case Conversion

May 4, 2015

I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?

View 7 Replies View Related

Do A CASE With A Expression

Aug 16, 2007



I know i can do a "IF" using expressions, the question is, can i do a CASE?

Thanks!

View 3 Replies View Related

Can I Use CASE Expression In AND Condition?

Jul 8, 2005

Hello:Is it possible to use CASE expression in AND condition? i.e.------------------------------------------CREATE PROC spBlah(   @id INT,   @val INT)ASSELECT * FROM aTableWHERE tableID = @idAND   (      CASE @val WHEN 1 THEN otherCol = someValue END      CASE @val WHEN 2 THEN otherCol != someOtherVlaue END   )-------------------------------------------

View 2 Replies View Related

Case Expression In Where Claus

Jan 11, 2006

I there a way to differ the filtering field through a Case expression in the Where claus?
ex:
Where   Case    When @StuNum = ''    Then S.SSN = @SSN   Else     S.StuNum = @StuNum  End
And ...
The actual field to filter by differs, but I can't seem to find the right syntax to do this.
Any help is appreciated : )

View 3 Replies View Related

Using Not Equal In Case Expression

Jul 22, 2013

The SUBSTRING function returns @domain.com. I don't want any results to be displayed from my sql statement if it equals @myemail.com. I have other cases too that are not relevant to my question. I'm getting an error that says invalid syntax near <

SELECT DISTINCT CASE CUST_EMLAD_TX
WHEN SUBSTRING(CUST_EMLAD_TX, CHARINDEX('@',CUST_EMLAD_TX), LEN(CUST_EMLAD_TX)) <> '@myemail.com' THEN CUST_EMLAD_TX
END
FROM ...

View 2 Replies View Related

Problem With Case Expression

Sep 30, 2005

In the Portal1 case expression in the script at the bottom I would liketo replace where the result 1 is returned, with the substring functionreturned as Portal{SUBSTRING(Field1, CHARINDEX('tonep', Field1) + 4, (CHARINDEX('.txt',Field1) - 8) - (CHARINDEX('tonep', Field1) + 4))}However, I am experiencing errors. I think it is because The substringfunction will not return a number as the case expression expects so Imust incorporate cast or convert, but do not know how. Can you help???SELECT portal1 = CASE WHEN len(Field1) > 5 THEN 1 ELSE '' END,SUBSTRING(Field1, CHARINDEX('tonep', Field1) + 4, (CHARINDEX('.txt',Field1) - 8)- (CHARINDEX('tonep', Field1) + 4)) AS portal,Table.*FROM Table

View 2 Replies View Related

Problem With Case Expression

Dec 4, 2007

I'm trying to write a case expression similar to the expression listed below. I basically want to compare the Anniversary date to the current date. Whenever I write the expression like this I get a syntax error.

Msg 102, Level 15, State 1, Line 147

Incorrect syntax near '<'.


Case AnniversaryDate

WHEN AnniversaryDate < GETDATE() Then 'Not Yet'

WHEN AnniversaryDate = GETDATE() Then 'Now"

ELSE 'You Missed it'

END AS Anniversary

Could someone please guide me in the correct syntax for this expression.
Thanks

View 5 Replies View Related

Error In CASE Expression

Aug 25, 2006

I would appreciate assistance as to how I should correct the following CASE expression::

BilledCarrier = CASE LEN(cur_billed_carrier) WHEN >0 THEN cur_billed_carrier ELSE 'Not Billed' END

I want to return the cur_billed_carrier when its length is >0 but I can't find the correct syntax. My attempt returns an error at the '>' operator. Thank you.

View 3 Replies View Related

Problem With CASE Expression

May 2, 2006

Hi, all here,

I have a problem with CASE expression in my SQL staments.

the problem is:

when I tried to just partly update the column a , I used the CASE expression : set a=case when b=null then 'null' end

the result was strange: then all the values for column a turned to null.

so what is the problem tho?

Thanks a lot in advance for any guidance.

View 4 Replies View Related

Case Expression Stor Proc, Need Some Help

Jul 10, 2006

ALTER PROCEDURE dbo.TEST_TOTALCALLS
    (
        @varDate as varchar (255),
        @StartDate as datetime,
        @EndDate as datetime
    )
AS

SELECT
CASE @varDate
WHEN 'Year' Then DATEPART(yy, CALLSTARTTIME)
WHEN 'Quarter' Then DATENAME(qq, CALLSTARTTIME)
WHEN 'Month' Then DATENAME(mm, CALLSTARTTIME)
END,
COUNT(*) as 'Total Calls'
FROM CALLMASTER
WHERE     (COMMERCIALS = '1') AND (CALLSTARTTIME >= @StartDate) AND (CALLENDTIME <= @EndDate)

GROUP BY
CASE @varDate
WHEN 'Year' Then DATEPART(yy, CALLSTARTTIME)
WHEN 'Quarter' Then DATENAME(qq, CALLSTARTTIME)
WHEN 'Month' Then DATEPART(mm, CALLSTARTTIME), DATENAME(mm, CALLSTARTTIME)  ' <---this part gave me an error, because of the comma,
END
ORDER BY
CASE @varDate
WHEN 'Year' Then DATEPART(yy, CALLSTARTTIME)
WHEN 'Quarter' Then DATENAME(qq, CALLSTARTTIME)
WHEN 'Month' Then DATEPART(mm, CALLSTARTTIME)
END

The month case is giving me an error. I think it has to do with two expressions in one line.
Anyone know how to combine that into 1 expression? or is there away to work around it?
As I would like to display the month as Name, but group and sort by number.
Thx!~

View 10 Replies View Related

Case Expression In SQL Server 2000

Aug 25, 2006

I have to use the Case expression in my query, so I search arround the web and got the following: SELECT title, price,        Budget = CASE price         WHEN price > 20.00 THEN 'Expensive'          WHEN price BETWEEN 10.00 AND 19.99 THEN 'Moderate'          WHEN price < 10.00 THEN 'Inexpensive'          ELSE 'Unknown'        END,FROM titles It should run OK base on my research in the internet. But my SQL Server gave me error: syntax error arround '>'.I did several search and many people can use the ">" sign or "<" sign in the Case expression, but I just can't use it in my SQL Server, I can't even use any boolean expression, I can only use values.can anyone help me out? My SQL Server Version is SQL Server 2000 Sevice Pack 4.Thanks!

View 5 Replies View Related

Using Case Expression In Exec SP Parameters

Jul 17, 2007

Hi,
 Maybe this is just totally wrong but this is what I'm trying to do.  I want to dynamically insert a value using a CASE expression while executing an external SP from my current SP.
 EXEC uspAddMessage @UserId,
CASE @MyAction
WHEN 'DELETE' THEN 'DELETED TRANSACTION.'
WHEN 'APPROVE' THEN 'TRANSACTION APPROVED.'
WHEN 'REJECT' THEN 'TRANSACTION REJECTED.'
END,
@DateStamp
 Keep in mind that this is in my stored proc that is doing the processing.  I'm calling this common proc when I complete my transactions.
 Thanks,
S

View 2 Replies View Related

Update Sub Query In Case Expression

Oct 3, 2005

Hello everyone,
is there anyway to use an update sub query in a case expression , something like this for exampleselect username,(case when password ='606' then (update users set username = 'me' where id= '3') else password end) from users i have been googling this issue just with no usefull resultsthanks for any replyMahmoud Manasrah

View 3 Replies View Related

UPDATE Involving CASE Expression

Oct 25, 2007

I am one very frustrated beginner. If it were not for wonderful information in this forum I would have taken early retirement by now!

Table contains information about new and departing computer and phone users in several departments which we support. This is an existing table which I'm trying to clean up.
The essential part:

CREATE TABLE [dbo].[HelpDesk_NewUser](
[AutoNumber] [int] IDENTITY(1,1) NOT NULL,
[SubmittedDate] [datetime] NULL,
[FirstName] [varchar](100) NOT NULL,
[LastName] [varchar](100) NOT NULL,
[Department] [varchar](100) NOT NULL,
[StartDate] [datetime] NULL,
[DepartDate] [datetime] NULL
[RequestedBy] [varchar](100) NOT NULL,
[UpdatedBy] [varchar](16) NOT NULL,
[CurrentStatus] [varchar](10) NOT NULL ,
[DateCurrentStatus] [datetime] NULL,
[FormType] [varchar](10) NOT NULL,
) ON [PRIMARY]

There can be more than one record per FirstName, LastName. FormType can be N for new or D for departing.
I want to do this for each record:
Read the FormType and Department from the record with the most recent activity (SubmittedDate) for each user
Convert Department to a 4 character department number
Update CurrentStatus with (FormType concatenated with the 4 character dept number) in all records for that user.

I have created another table called UserMostRecent which contains the most recent record for each user.

I have written a query to do this by brute force (read a record, set local variables, update a record), but I would like learn a simpler way to do it. I don't understand the syntax of CASE because it seems to change depending on where it is used.

Here is what I have tried that does not work. Error is "Incorrect syntax near word CASE"

UPDATE HelpDesk_NewUser
SET DateCurrentStatus = b.DateMostRecent,
CurrentStatus = (b.FormType + a.Department
CASE
WHEN 'Roads Department' THEN '3000'
WHEN 'Engineering and Survey Services' THEN '1900'
WHEN 'Waste Management' THEN '8999'
WHEN 'Kern Air Pollution Control District' THEN '9149'
WHEN 'Environmental Health' THEN '4113'
WHEN 'Building Inspection' THEN '2625'
WHEN 'Animal Control' THEN '2760'
WHEN 'Planning Department' THEN '2750'
WHEN 'Community and Economic Development' THEN '5940'
WHEN 'Resource Management Agency' THEN '2730'
WHEN 'Code Compliance' THEN '2620'
WHEN 'Roads Kern Regional Transit' THEN '8998'
END)
FROM HelpDesk_NewUser a JOIN UserMostRecent b
ON (a.LastName = b.LastName and a.FirstName = b.FirstName)

Thank you, forum participants. You are the best!

View 4 Replies View Related

Case Expression Within A Stored Proc

Jul 20, 2005

Is it possible? I have a request to create a stored proc that willdynamically add a range to a WHERE clause based on a numeric value of acomment type. If the incoming comment type request is say 10, thewhere clause needs to be set to IN(10,11,12,13,14,15,16,17,18,19)OR ifa 20 is passed in the clause would read IN(20,21.....)So I was thinking that a CASE expression within the proc would be thebest way to go, but have had no luck in finding an example or any otherrelated information regarding CASE exp in a proc.TIABill

View 3 Replies View Related

SQL Server 2008 :: Using Expression In GROUP BY Clause

Feb 23, 2015

I am working to move an application from MySQL to SQL Server. The person who developed the MySQL application has little database experience, and took some shortcuts that the lax nature of MySQL allows. One query with which I am struggling looks something like this:

SELECT StartTime + Offset, min(Sensor), max(Sensor)
FROM SensorData
WHERE SensorID = @SensorID AND
StartTime + Offset > @BeginTime AND
StartTime + Offset < @EndTime
GROUP BY (StartTime + Offset) / 100
ORDER BY StartTime + Offset

What we are trying to accomplish is to return minimum and maximum sensor values over a number of periods between the BeginTime and EndTime. When I run this query in MySQL on a sample dataset, it returns a small number of rows, with each one being the min/max values for a portion of the overall period.

Under MS SQL Server 2008, SP3, I get the two following error messages:
Column 'SensorData.StartTime' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
Column 'SensorData.Offset' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.

View 9 Replies View Related

Converting A String Expression To Proper Case

Oct 22, 2000

How would I convert an expression like on of these to all upper case first letters with remaining letters lower case? VB has a function for that but sql doesn't seem to. I thought about having a loop go through each character to check for spaces. I've written a couple of similar pieces of code in VB when a while ago, but is there a better way? Thanks :)

Just a couple of typical examples of how the data should appear ~

payment, credit card ==> Payment, Credit Card
butcher & singer ==> Butcher & Singer

View 1 Replies View Related

Concatenating Problem Two Field In Case Expression

Jun 19, 2008

Dear all,
I am using sql server 2005.
I have two field firstname and lastname. Actual requirment is if category is doctor then display name as Dr. name else name but when I use following sql stament
Whenever one of the name is null it show name as null that is whenever firstname or lastname is null I get name as null

select @DOCNAME = CASE
WHEN DR_CUST_CATEGORY = 1 THEN 'Dr.' + ' ' + dr_cust_name + dr_cust_lastname
ELSE dr_cust_name + dr_cust_lastname
END FROM DOCTOR_MASTER WHERE DR_CUST_DOCTORCODE =@DOCCODE

Please suggest some ideas or any other idea please suggest
Thank you.

View 1 Replies View Related

Case Expression Plus Outer Join In Ole Db Source

Oct 26, 2006

I'm trying to generate the data for a 2-column table, where both columns are defined as NOT NULL and the second column is a uniqueidentifier.

In SQL Server Management Studio, this works fine:insert into table_3(column_a, column_b)
select table_1.column_a, (case when table_2.column_b is NULL then newid() else table_2.column_b end) as column_b
from table_1 left outer join table_2 on table_1.column_c = table_2.column_c


That is, column_b of the SELECT result has no NULL values, and all 35,986 rows are successfully inserted into a previously empty table_3. (If I comment out the INSERT INTO clause and project table_2.column_b instead of "(case ... end) as column_b", the SELECT result includes 380 rows with a NULL in column_b, so I know the case expression plus the outer join are working as expected.)

But when I use the SELECT query as the SQL command in an OLE DB Source component that is connected directly to the OLE DB Destination for the result table, I get this error:There was an error with input column "column_b" (445) on input "OLE DB Destination Input" (420
The column status returned was: "The value violated the integrity constraints for the column.".


And sure enough, when I modify the result table to allow NULL in column_b, truncate it, and re-run the data flow, it inserts the exact same 380 rows with a NULL in column_b among the 35,986 rows.

So what is SSIS doing to screw up the results of the SELECT command???

View 6 Replies View Related

Error Using Case Expression In Order By Statement

Feb 22, 2008

I have been trying to get the following Selects to work using a case expression in the order by section.

I know I can easily separate out the two statements but I want to do a select using the case statement below ;
however, I keep getting error 16 --"Order by items must appear in the select list if the statement contains a union.

If remove the case statement and put order by "internalID desc" I receive no errors. Moreover, when I take out the union statement and execute the two select statements with each including the case expression it runs as planned.

Can anyone tell what the problem is here? I have combed the web looking for an answer, but it seems that the statement is valid.


Thanks
J
declare @date
set @date = '2001'



select internalID from section_data_v3

union

select internalID from section_data_v4

order by
case when (@date = '2001') then internalID end desc

View 5 Replies View Related

Like Comparison Operator In An Expression To Ignore Case

Aug 31, 2007

How do you make the "Like" comparison operator ignore case in an expression??

Expression looks like this:




Code SnippetParameters!CompanyFilterOp.Value = "%",Fields!company.Value like "*" & Parameters!Company.Value & "*"





BTW, the expression above is part of a switch expression, and is at the table level.

Data contains "General Industry" in Company column from database.

User enters "indust" in Company Parameter text box, and result is no data found.

User enters "Indust" in Company Parameter text box, and data is returned.

Thanks in advance for your time in responding.

View 3 Replies View Related

Using CASE In The WHERE Clause

Jan 4, 2002

This is a CASE statement that I am using in the WHERE clause of my query.
SQL Syntax checker keeps returning an error (Incorrect syntax near '=').
Can anyone help me figure out what I need to do to get this to work?

Case When (@Weekday=-1 and @Saturday=0 and @Sunday=0) Then (L1.[Weekday]=-1 AND L2.[Weekday]=-1 AND L3.[Weekday]=-1 AND L4.[Weekday]=-1)
When (@Weekday=0 and @Saturday=-1 and @Sunday=0) Then (L1.Saturday=-1 AND L2.Saturday=-1 AND L3.Saturday=-1 AND L4.Saturday=-1)
When (@Weekday=0 and @Saturday=0 and @Sunday=-1) Then (L1.Sunday=-1 AND L2.Sunday=-1 AND L3.Sunday=-1 AND L4.Sunday=-1)
When (@Weekday=-1 and @Saturday=-1 and @Sunday=-0) Then (L1.Sunday=0 AND L2.Sunday=0 AND L3.Sunday=0 AND L4.Sunday=0)
When (@Weekday=-1 and @Saturday=0 and @Sunday=-1) Then (L1.Saturday=0 AND L2.Saturday=0 AND L3.Saturday=0 AND L4.Saturday=0)
When (@Weekday=0 and @Saturday=-1 and @Sunday=-1) Then (L1.[Weekday]=0 AND L2.[Weekday]=0 AND L3.[Weekday]=0 AND L4.[Weekday]=0)
Else
((L1.[Weekday]=-1 AND L2.[Weekday]=-1 AND L3.[Weekday]=-1 AND L4.[Weekday]=-1) OR
(L1.Saturday=-1 AND L2.Saturday=-1 AND L3.Saturday=-1 AND L4.Saturday=-1) OR
(L1.Sunday=-1 AND L2.Sunday=-1 AND L3.Sunday=-1 AND L4.Sunday=-1))
End

View 3 Replies View Related

Using Case In Having Clause

Jan 28, 2004

I am stumped trying to use case/if type conditions in having clause. Not sure if it's possible or my syntax or both.

Trying to do something like this:

CASE WHEN (dbo.t_COT_Summary.TCD >= dbo.ReportDate(CONVERT(nvarchar(30), GETDATE(), 101))) THEN

HAVING dbo.t_COT_AP_Exclude.Primary_ID IS NOT NULL

ELSE

HAVING dbo.t_COT_AP_Exclude.Primary_ID IS NULL

END

dbo.t_COT_Summary.TCD = Target Completion Date
dbo.ReportDate = Previous Business Day Function
dbo.t_COT_AP_Exclude.Primary_ID = A left joined ID value I wish to exclude or include in the main query's having.

I hope this makes sense... any suggestions on a better way to do this would be greatly appreciated!

View 2 Replies View Related

Case In A Where Clause

Aug 23, 2007

A deveoper just asked me if there is a way to use a case in a where clause. Is this feasible or will we have to do some dynamic sql

where (cr.cb_routine = 1 or cr.cb_urgent = 1 or cr.cb_emergency_room = 1
or cr.cb_on_site_clinic = 1 or cr.cb_retro_request = 1 or cr.cb_initial = 1
or cr.cb_followup = 1 or cr.cb_in_person = 1 or cr.cb_telemed = 1
or cr.df_within is not null or cr.df_provider is not null
or cr.df_proc_test_spec is not null or cr.df_provider_area is not null)
and p.privacy_level = 10
and pe.Location_ID = @Location and
case when @status = 'Pended' then cr.cb_supp_info_need1 = 1
case when @status = 'Criteria for service not met' then cr.cb_criteria_not_1 = 1
case when @status = 'Other' then cr.cb_other_1 = 1
case when @status = 'All' then

View 1 Replies View Related

CASE WHERE Clause Help

Apr 19, 2007

Code:


WHERE
weekdayname(weekday(sfa_admin_sbaccount.add_time)) =
case
when "Monday"
then (((SFA_ADMIN_SBACCOUNT.ADD_TIME)>=Date()-3 And (SFA_ADMIN_SBACCOUNT.ADD_TIME)<Date()))
else (((SFA_ADMIN_SBACCOUNT.ADD_TIME)>=Date()-1 And (SFA_ADMIN_SBACCOUNT.ADD_TIME)<Date())));
end



This keeps telling me I'm missing an operator. What I want the query to do is to evaluate the current day's date, then use that to determine whether it needs to set a WHERE clause that goes back 3 days (if it's a Monday) or one day (if it's not a Monday)

This is in Access. Any suggestions?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved