Transact SQL :: Calculate Events On Each Day
Jun 17, 2015
Need calculating the count of events on each day. I have an event log table as shown below.
DECLARE @EventLog TABLE ( event_id int, status_id varchar(20) , dttm datetime )
INSERT INTO @EventLog
SELECT '100','Inplace','01/05/2015 05:00' UNION ALL
SELECT '100','Removed','03/05/2015 10:00' UNION ALL
SELECT '100','Inplace','05/05/2015 10:41' UNION ALL
[Code] ....
I need an output to look like on each day how many events were in place.
E.g.: for the month on May , Event_id 100 was inplace on 1st and removed on 3rd , so on 1st may 2 event_ids (100, 103) hence 2 .
event_ids - 103 / 104 and inplace the whole month and not removed. so its calculated the count as 2 til towards teh end of the month.
So I need to count of all each event_id in place for each day in may.
How to calculate the missing dates to ...
View 7 Replies
ADVERTISEMENT
Feb 3, 2014
I am using this code for LongRunning Queries.
CREATE EVENT SESSION LongRunningQuery
ON SERVER
ADD EVENT sqlserver.sql_statement_completed
(
ACTION (sqlserver.sql_text, sqlserver.tsql_stack)
WHERE sqlserver.sql_statement_completed.duration > 60000
[Code] ...
Here Instead of writing to XML file how can send an EMAIL if a query runs more than 1 minute in my server ?
View 2 Replies
View Related
May 22, 2015
I created a PowerPivot measure which is a ratio Ratio = Number of Events/Time calculated on 12 months. I would like the grand total to be this Rate Sum(Number Of Events)/Sum(Time calculated).
In my Pivot I have one measure which I called Value and this value can have different types depending on one attribute.For instance one attribute is number of events, an other one is time and the third one is ratio.I want to display a custom grand total simple sum for events and time and a calculation of my ratio for ratio.
For instance
201501 201502 201503 TOTAL
Number of events 8 10 10 28
Time 5 5
4 14
Ratio 8/5 10/5 10/4 28/14
View 3 Replies
View Related
Jun 22, 2015
I have a table that holds log event records, that keep getting appended. I need to get the duration of the each event 0 which has other events before and after. How can I do this - to get event duration of event 0 and the cumulative.
ID Event Date
1 1 2015-06-21 21:01:44.457
2 1 2015-06-21 21:01:44.457
3 0 2015-06-21 21:02:04.780
4 1 2015-06-21 21:02:32.600
5 0 2015-06-21 21:02:57.967
6 1 2015-06-21 21:03:30.513
View 7 Replies
View Related
May 27, 2015
We are planning to convert or change all existing Traces to Extended Events in SQL server 2012. What is the procedure to convert custom traces. We have already created some below custom traces: like this we are planning to convert for all servers.
exec sp_trace_setevent @TraceID, 20, 23, @on
exec sp_trace_setevent @TraceID, 20, 8, @on
exec sp_trace_setevent @TraceID, 20, 12, @on
exec sp_trace_setevent @TraceID, 20, 64, @on
exec sp_trace_setevent @TraceID, 20, 1, @on
exec sp_trace_setevent @TraceID, 20, 21, @on
[code]...
View 6 Replies
View Related
Jun 20, 2007
Hello experts. I have been searching for anything about this but found very little. What are the events logged in SQL Server Error Logs aside from Successful/Failed Login, Backup/Restore/Recover database and, start/init sql server? Can we configure this to log other events, like CREATE or DBCC events for example? If so, how? Thanks a lot.
View 1 Replies
View Related
Oct 28, 2015
How do I author a SQL Query which meets the following requirement: Display a ratio of (instances where status is a success)/(instances where status is a success or instance is a failure). The below syntax is incorrect. However, I hope to beter explain what I am trying to accomplish using the incorrect SQL query below.
SELECT SUM(Case When Status = "SUCCESS")/SUM( Case When Status = "FALLBACK")
FROM ruleResults;
View 2 Replies
View Related
Oct 8, 2015
I have the following store procedure :
SELECT APHIST.ReturnDate AS ATDATE
,API_HIST.[ActionPlanItemID]
,API_HIST.[ActionPlanID]
,PIT.[ProductItemID]
,PIT.ProductItemCode
,PIT.Name,
[code]....
What I am trying to get is a RunningStock level column which is able to display stock level as describe below :
If ItemStatus value is 0, that means that the item has been taken out from stock.
So based on that the first row running Stock level is calclulated as
(ProductQuantity * ItemUnitWeight)-ItemQuantity=9...
For the second record, ItemsStatus=1 which means the item return to stock, at the time the running stock value calculation should be the previous row Running Stok value (=9 ) +(ItemQuantity*ItemUnitWeight)When the ItemStatus=2, that means the item is definitely out and will be never back to current stock. Is there a way to get that calculation field ?
View 6 Replies
View Related
Sep 16, 2015
I have table named #table and three columns. SinGroup(it does not matter, can be anything), Column1, and Column2.
CREATE TABLE #table(
sinGroup NVARCHAR(10)
,column1 INT
,column2 int
);
And i have some data:
INSERT INTO #table(sinGroup,column1,column2) VALUES
('y1',100,0),
('y2',0,60),
('y3',40,20),
('z1',150,0),
('z2',0,50),
('z3',0,50)
I want to know how to get this result set (c1 - c2 and group by Y and Z and the result shown under the column 1):
SinGroup C1 C2
y1 100 0
y2 0 60
y3 40 20
Y 60 0
z1 150 0
z2 0 50
z3 0 50
Z 50 0
And also result like this (c1-c2 and grop by each row,the result show under the column 1):
SinGroup C1 C2
y1 100 0
y1 100 0
y2 0 60
y2 -60 0
y3 40 20
y3 20 0
z1 150 0
z1 150 0
z2 0 50
z2 -50 0
z3 0 50
z3 -50 0
View 5 Replies
View Related
Jan 28, 2006
I have a start date, end date for each event.
I want to list all events between the start and end date comes in Saturday or Sunday.
in SQL server 2005 TSQL statement.
any insights ?
View 1 Replies
View Related
Nov 4, 2015
I am trying to create a "Loan Ledger Card" in SSRS which does the calculation up to report extracting time. I was able to create it on Excel (Click to download the Excel file) as we can calculate amounts for each installment based on Row and Column name. You can test it by putting any amount (Here it should be below 62000 as it is the total balance of loan) in "Amount Paid" yellow cell and see the effect.
I have made a selection in SQL (attached query and result in screenshot). It calculates the total paid amount by now on the first row, and all due amounts in other rows. Basically, It should first deduct the interest from first row, then principle, same process for second row and so on until it covers the whole paid amount.
SELECT
'0' As RN
,memrepay.lnr
,'Repayment' AS Type
,SYSDATETIME() AS NOW
,SUM(memrepay.mprinc) As PrincPaid
,SUM(memrepay.mint) As IntPaid
[Code] .....
How can I do the similar calculation of Excel file in "SQL query" or "SSRS custom code"?
View 2 Replies
View Related
Aug 19, 2015
I have 2 tables as follows:
table A-NewParts
PartNumber
Description
LaunchDate
a123
product a
4/1/2009
[code].....
I want to get end result as sales for each new product for a rolling period from Launch date as year1 sales,year2 sales...and so on which I got through case statements.I am stuck on how to get the total Sales for all products (including new products) in the same rolling period based on the different launch dates for each new product.
PartNumber
Description
LaunchDate
Yr1 Sales
Total Yr1 Sales
Yr2 Sales
Total Yr2 Sales
a123
[code].....
View 3 Replies
View Related
Nov 16, 2015
I need to build a query to calculate the size of all tables in a database ...
View 5 Replies
View Related
Mar 27, 2014
I am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria? I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!?
View 4 Replies
View Related
Jun 17, 2015
I have a table which has name,Speciality,start date and end date. So each person may have 1/more rows .They will have more if they change their specialities. For example if you look at the data below.
AdjusterNameSpecialtyDatestartDateEnd
Test Inside Property2009-08-29 2010-07-31
Test Management2010-08-012012-07-31
If we see at the data above Test has 2 rows because he changed his specialty in the middle.My requirement is to calculate the total number of employees in each month for last 2 years in each speciality. For example if we look at the example above, Test was in Inside property from 2009 Aug to 2010 Aug but if i use just the date start and take the month for each adjuster it gives me the number of adjusters started in that year and month but what i want is Test should be counted in all the months for Inside property until 2010 07 month. Which means i want to have the total number of adjusters present by each speciality for each month of last 2 years .
View 2 Replies
View Related
Jul 14, 2015
I have a data set as -
ID Set Date DB Date
100 Null 07/01/15
100 07/05/15 07/02/15
100 07/10/15 07/08/15
I want to able to get 2 unique dates
1. 07/02/15 - As I want the DB date for ID - 100 when set date changed from a null value to non null value.
2. 07/08/15 - As I want the DB date for ID - 100 when a non null set date changes.
The table has such records for lot of different ID's.
View 29 Replies
View Related
Oct 30, 2015
Col1 Col2 Col3 Col4
54763.00 21 0 0
--Row1
59574.00 23 0 0
--Row2
64085.00 20 0 0
--Row3
0.0 0.00 0 0 0
--Row4
I'm trying to calculate Average of Col1 of above table based on below scenario:
CASE WHEN all the columns in the above table are “0” (as highlighted) THEN I want AVERAGE of Col1 as (Row1+Row2+Row3)/3
ELSE if at least one of the column of highlighted row has value other than “0”, THEN I want the AVERAGE of Col1 to be (Row1+Row2+Row3+Row4)/4
View 7 Replies
View Related
Nov 4, 2015
How to calculate estimated completion time of a job and what is the variance/difference in time based on previous job history. Looking for tsql query which can accomplish this.For example)...Daily a job is taking 10 mins to complete. However, today due to some reason, the job is running over an hour and still running. It could be a blocking issue or some performance issue on the server due to which the job is still running.
In such cases, using a tsql query or a stored proc which monitor these jobs every 3 mins (Configurable value), so every 3 mins , query has to check, if they are any jobs which are taking more time than its usual completion time/avg completion time in that case shoot an email using dbmail functionality i.e. sp_Senddbmail .. From there, DBA can dig further using waits or sql trace etc...
View 7 Replies
View Related
Jun 4, 2015
I have a table "PrintArea" with below table structure.
The Details column have " " separated data.
CREATE TABLE [dbo].[PrintArea](
[ID] [int] IDENTITY(1,1) NOT NULL,
[AccessDate] [datetime] NULL,
[IPAddress] [varchar](16) NULL,
[SerialNum] [varchar](256) NULL,
[Description] [varchar](256) NULL,
[Details] [varchar](2048) NULL,
)
This is how the data lookis like.
INSERT [dbo].[PrintArea] ([ID], [AccessDate], [IPAddress], [SerialNum], [Description], [Details]) VALUES (104280, CAST(0x0000A28A00A88310 AS DateTime), N'70.89.39.161', N'InSign-f529c824-85a6-4a64-8c59-e9f786d718f3-YM2AS31367,BFEBFBFF000306A9', N'Printing', N'Headboard_Insert_4
1
1
7938
5579
[Code] ...
I want to calculate totalAreaPrinted based on below formula from Details column.
View 2 Replies
View Related
May 9, 2015
I needed to create a stored procedure to lock a user who makes 3 incorect entries of his password. I did it successfully. Now the problem what i have is that i want to lock the user only if he makes the 3 incorrect entries within 30 minutes.
I created a field named "FirstEntryTime" of type datetime that saves the date of the first incorrect entry. I tried to make an if statement:
if (@timesOfEntry <=2 AND DATEDIFF(MINUTE, firstEntryTime,GETDATE()) <= 30)
Begin
Update myTable set ...
End
View 6 Replies
View Related
May 16, 2015
I have a table like below
i need to calculate total working time against 'AttID' (where I - intime, O - OutTime)
ex :
AttID TotalTime
1 08:02:00
2 07:45:00
View 7 Replies
View Related
Jun 7, 2015
Iam trying to calculate the number of working days between two dates. Iam getting the uouput as only 1 02 r working days??
select building_number as SchoolID,building_name as Campus, count( distinct( CASE WHEN(( DATEPART(dw, CurDate) + @@DATEFIRST)%7 NOT IN (0,1)) tHEN 1 ELSE 0 END)) as NumberofDaysServed from Sales sl join Buildings b on sl.Building_Num =b.Building_number join students2 s on s.Student_Number= sl.Student_Num join Sale_Items SI on si.UID = sl.UID where CONVERT(CHAR(10),CurDate,120) between '2015-05-01' and '2015-05-07' and VoidReview <> 'v' and SI.INum = '1' group by building_number,building_name order by building_number,Building_Name;
View 8 Replies
View Related
Oct 22, 2015
I have a table Product2 as the attachment at the bottom. Now i want to create a Column "Purchasing rate" over Product and Region like this. I tried some Code but it gave me still Error.
createtableProduct2
(
[product] [varchar](255),
[Region] [varchar](15),
[Subregion] [varchar](25),
[Code] ....
View 5 Replies
View Related
Aug 18, 2015
How I can calculate the 'SUM of 100' of EDSUM column for EDCOST column. Every EDCOST should have sum of 100 on the calculation of EDSUM. I just want to know which is the EDCOST which has <>sum of 100.
Create table #sum (ED numeric, EDCOST numeric, EDName char(6), EDSum numeric, EDCode char(2))
Insert into #sum values (121, 2000,'HLMO',98,'DT')
Insert into #sum values (122, 2000,'HLMT',2,'DT')
Insert into #sum values (123, 2001,'HLMO',100,'DT')
Insert into #sum values (124, 2002,'HLMD',97,'DT')
[Code] ...
Expeced Output:
ED EDCOST EDName EDSum EDCode
126 2003 HLMR 98 DT
130 2005 HLMR 98 DT
View 7 Replies
View Related
Nov 23, 2015
create table #t
(
id int,
col1 decimal(18,2)
)
go
[Code] ...
-- I want to subtract @X and col1. But my variable @X must be reduced for each value in col1 for each next row until it reaches zero.
-- OUTPUT:
-- id col1 col2
--@X at starting point is 15000
-- 1 5000.00 0 --@X IS 10000 = 15000 - 5000(col1)
-- 2 1000.00 0 --@X IS 9000 = 10000 - 1000
-- 3 10000.00 1000.00 --@X IS 1000 = 9000 - 10000
-- 4 12000.00 12000.00
-- 5 300.00 300.00
-- 6 35000.00 35000.00
--in col2 i just put zero where col1 is substract from @X and continue for every subsequent order.
-- in 3 row value is 1000 becouse @X is that big (1000 left from col1)
View 13 Replies
View Related
Mar 20, 2004
I would like to AUTOMATICALLY count the event for the month BEFORE today
and
count the events remaining in the month (including those for today).
I can count the events remaining in the month manually with this query (today being March 20):
SELECT Count(EventID) AS [Left for Month],
FROM RECalendar
WHERE
(EventTimeBegin >= DATEADD(DAY, 1, (CONVERT(char(10), GETDATE(), 101)))
AND EventTimeBegin < DATEADD(DAY, 12, (CONVERT(char(10), GETDATE(), 101))))
Could anyone provide me with the correct syntax to count the events for the current month before today
and
to count the events remaining in the month, including today.
Thank you for your assistance in advance.
Joel
View 1 Replies
View Related
Aug 3, 2015
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies
View Related
May 29, 1999
What we are trying to do is watch a table in one database for an insert. If something is inserted into a unique ID column, we want to go to another database, on the same server, and look for that same number and place a value in another column for that record. Any ideas?
View 1 Replies
View Related
May 16, 2008
as asap pl give the detailed and clear description reg differences between delegates and events
vedavathi zend
View 3 Replies
View Related
Dec 16, 2005
I'd like to build an application that will react to specific changes todata in a set of tables in a database. The application would replicatethese data changes to another database. The target database won't beSQLServer. Neither is this simple replication, at times the applicationwill need to get extra data from the source database before the targetis updated.In other DBMS systems I am involved with the DBMS has the facilty towrite to an application message queue so that the monitoring applicationonly has to monitor the queue rather than a database. What I'd like todo is something like this:1. Some application changes data in a table.2. A trigger reacts to the change and writes a message to an applicationqueue.3. A windows service/process monitors the queue and picks up themessage. It then carries out whatever replication/DB actions are necessary.This would mean defining a number of new triggers on existing tables anddeveloping the windows service/process. Existing applications and theexisting tables in the database would remain unchanged. I'm not awindows programmer but I have someone in my team who is and who willbuild the windows service/process.The bit I'm unsure about is how a trigger can write to an applicationqueue or communicate with the windows service/process. I may be usingthe wrong terminology as I have more knowledge of Unix than Windows.Could anyone help with how I can do this or suggest any alternativestrategies.Thanks In Advance.Laurence
View 3 Replies
View Related
Aug 30, 2006
Just finishing of a large ETL system and have aquestion about the following:-
We have 164 child packages being called from a single parent package which is setup to perform logging to a SQL Server table. Anything that Errors or has Warnings is logged accordingly, however, how do you trap the PackageStart and PackageEnd events? when the child package knows nothing about logging?
My first thought was to have the Parent call the AddEvent SP with the appropriate values, but thought I may check here in case I missed something
View 5 Replies
View Related
Aug 30, 2007
Hi,
I'm trying to catch an error and trigger a control flow to handle it. I introduce a control flow to catch "OnError" event, but , despite muy package has some errors it doesnt work...
Another issue, if i omit an error on a transformation object ( in order let the flow continue executing), can this error be managed by an event or record it in a log?
Thanks
View 6 Replies
View Related
Oct 25, 2007
Hi
I would like to know how I can get hold the text for a service and event notifications.
What I need is the ability to get hold of a list of the events I'm currently monitoring.
i.e.
Server or database level
I though I would be able to get hold of this in sys.server_event_notifications but it doesn't seem to have any data although my server level event notifcation service is running.
Any help?
TIA
View 1 Replies
View Related
