I have a table, dbo.Table1(Id,Col1,Col2,Col3,Col4,Col5,Col6,Col7,Col8) that I need to split between two tables dbo.Table2(Id, Col1, Col3, Col4) and dbo.Table3(Id,dbo.Table2_Id,Col5,Col6,Col7,Col8). But in dbo.Table3 I need to have the Id column from dbo.Table2 populated since its a foreign key constraint in dbo.Table3. How do I go about doing this?
View 3 Replies
Hi,
I have 3 tables with the follwing schema
Table <Category>
{
UniqueID,
LastDate DateTime
}
Assume the follwing tables with data following the above schema
Table Cat1
{
1, D1
2, D2
3, D3
}
Table Cat2
{
2, D4
3,D5
4, D6
}
Table Cat3
{
1, D7
3,D8
5,D9
}
I have a Master and the schema is as follows
Table master
{
UniqueId,
Cat1 DateTime, -- This is same as the Table name
Cat2 DateTime, -- This is same as the Table name
Cat3 DateTime -- This is same as the Table name
}
After inserting the data from all these 3 tables, I want the my master table to look like this
Table Master
{
UniqueId cat1 cat2 Cat3
------------ --------- ------- -----------
1 D1 NULL D7
2 D2 D4 NULL
3 D3 D5 D8
4 NULL D6 NULL
5 NULL NULL D9
}
Please remember the column names will be same as that of table names
can any one pelase let me know the query t o acheive this
Thanks for your quick response
~Mohan Babu
I've a table named Master in which a column is referenced in other tables like Child1, Child2,.. ChildN. I've deleted a part of data( say Column Id values 1,2,3,4,5) from all the Child tables which pointed to Master table Id column.
Now, I want to delete the same Id values from Master table as there rows are not referred in any of the child tables. When I try to delete the Id values 1 thru 5 from Master table, it is scanning all child tables for the references and taking lot of time for the deletion.
Is there any way to specify to the system(in the query) to delete the Master table values without scanning the child tables..?
Is there any simple way to copy tables from one database to another in SQL Management Studio or VS 2005? I sometimes work split work between home and work and I often need to copy and table and its data (data, stored procedure, etc) to a different database, but having to create a new database then copy the data is a pain. Is there an easier way?
View 5 Replies View RelatedWe've had a new server set up with SQL 2012 and I'm in the process of moving data to it from a 2008 (SP2) server.
Details are as follows:-
2012 instance:- Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
May 14 2014 18:34:29
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2008 instance:- Microsoft SQL Server 2008 (SP2) - 10.0.4000.0 (X64)
Sep 16 2010 19:43:16
Copyright (c) 1988-2008 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: ) (VM)
I don't want to do a backup/restore routine as there are collation conflicts on the 2008 server.I've created the database and tables on the 2012 instance and now I want to transfer the data from the 2008 instance to the 2012 one.
The 2012 instance has a linked server to the 2008 instance.I was trying to use sp_MSForEachTable (I know, it's old and will probably disappear shortly) but that doesn't seem to work properly because some of the columns have an Identity field set up.
Some of the tables have upwards of 10 million records in them and are quite sizeable.how I can achieve the transfer without a back-up/restore?
Hi. I need to move data from one database table to
another across database instances. A simple example of the typical
move would be:
[CODE]
INSERT into destination_db.dbo.table1
SELECT column1, column2, column3, column4 from source_db.dbo.table2
[/CODE]
My options are:
1. Create an SSIS package to perform the move.
2. Create sprocs and schedule the data move as jobs.
3. Write .NET code using sprocs to perform the move.
I'll have to move hundreds of thousands of records, so I want the
option that provides the best performance. I'm guessing that option 3
will be the slowest.
Thanks for the help!
1. Take a subset of data from about 100 tables that have multiple references to other tables in this group of 100 from a first DB.
2. Insert the above data into a second DB, a database that already has data in the 100 tables, while maintaining the correct references.
As a general approach, the best way I can think of doing this is as follows:
1. Create mapping tables for every ID that is referenced in a different table (OldID NewID)
2. Insert the old data into the new table and output the OldID and NewID into the mapping table.
3. Use that mapping data to make sure all tables that use those IDs have the new IDs in DB2.
This approach is extremely labor intensive both on initial implementation and would require a fairly substantial amount of work to maintain going forward.
Hi,
I have 3 tables with the follwing schema
Table <Category>
{
UniqueID,
LastDate DateTime
}
Assume the follwing tables with data following the above schema
Table Cat1
{
1, D1
2, D2
3, D3
}
Table Cat2
{
2, D4
3,D5
4, D6
}
Table Cat3
{
1, D7
3,D8
5,D9
}
I have a Master and the schema is as follows
Table master
{
UniqueId,
Cat1 DateTime, -- This is same as the Table name
Cat2 DateTime, -- This is same as the Table name
Cat3 DateTime -- This is same as the Table name
}
After inserting the data from all these 3 tables, I want the my master table to look like this
Table Master
{
UniqueId cat1 cat2 Cat3
------------ --------- ------- -----------
1 D1 NULL D7
2 D2 D4 NULL
3 D3 D5 D8
4 NULL D6 NULL
5 NULL NULL D9
}
Please remember the column names will be same as that of table names
can any one pelase let me know the query t o acheive this
Thanks for your quick response
~Mohan Babu
I have a real table with an identity column and a trigger to populate this column.
I need to import / massage data for data loads from a different format, so I have a temp table defined that contains only the columns that are represented in the data file so I can bulk insert.
I then alter this table to add all the other columns so that it reflects all the columns in the real table. I then populate all the values so that this contains the data I need.
I then want to insert into the real table pushing the data from the temp table, however this gives me errors stating that the query returned multiple rows.
I specified all the columns in the insert grouping as well as on the select from the temp table.
ANY thoughts / comments are appreciated. This is beginning to drive me nuts.
Rob
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
i have 2 tables (both containing the same column names/datatypes), say table1 and table2.. table1 is the most recent, but some rows were deleted on accident.. table2 was a backup that has all the data we need, but some of it is old, so what i want to do is overwrrite the rows in table 2 that also exist in table 1 with the table 1 rows, but the rows in table 2 that do not exist in table one, leave those as is.. both tables have a primary key, user_id.
any ideas on how i could do this easily?
thanks
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
Hello,
Probabaly a silly question yet as a DOTNET developer, I'm trying to simulate DTS when for example, I don't have permission to perform DTS on a production server.
In particular and interested regards caching of rows before the service decides to flush the buffer and write to the target table. Safe to assume DTS is cursor based?
hi all,
i have a dts that copies table contents from remore server to local server.
remote table:
ItemID|name
1 |name1
2 |name22
3 |name33
local table:
ItemID|name
1 |name1
2 |name2
i want that the dts will only copy the new rows( aka. row with ItemID = 3) and leave the other rows a they are.
can any one help me create such a dts.
please help!
Hi All
Iam using sql 2005 and am new to it, I want to copy a table and data from server to another, how is this possible?
Many Thanks in advance....
I have the following table:
Table name: RR
columns:
Subject (varchar (35), Null)
Topic (varchar (35), Null)
RD (text, null)
RR (text, null)
Picture (varchar (50), Null)
Video (varchar (50), Null)
RRID (int, Not Null)
TSTAMP (datetime, Null)
RRCount (int, Not Null)
This table stores common information used in resolving technical problems based on Subject and Topic. However, I've now created a Subject/Topic where I want to copy all the data that corresponds to another Subject/topic.
Example:
There are 35 rows that correspond to Subject = 'Publisher01' and Topic = 'Subcategory03'. I want to create 35 new rows that contain the same RD and RR data, but have Subject = 'Publisher02' and Topic = 'Subcategory07'. Highest current RRID = 5008
I cannot figure out how to write that query. I apologize in advance for the fact that this is, no doubt, a seriously beginner question.
hi all
i have two databases on two different machines.
both databses r having same names.
i want to copy data from the table in other database to table in databse on my machine .
how can i do this.
i will be very thankful to receive help.
Can i do something like this
INSERT INTO CITIBANK.dbo.Contract (*)
FROM exec sp..
where sp is the stored procedure ?
Or do i need to specify all the colums where the * is ?
and if so is it the columns from the SP or the colums
from the destination table ?
Hello,
I have a Data Flow Source that uses a SQL Command to pull data. In the SQL statement, I used CAST to change all varchar types to Nvarvchar to suit MS Access. I can preview the data from the source. In testing, the SQL statement only pulls about ten records.
I have a Microsoft 2000 Access database table as a destination. Data in each column in the table is required, and all columns have defaults.
I also have a grid data viewer set up. I have the DefaultBufferMaxRows set to 2 so that I can see data going across. When I execute this dataflow, no data is transfered to the Access database table. No data shows up in the dataviewer. There are no errors. The 'Execution Results' tab does not show errors, but indicates that zero rows were transfered. There are no warnings.
How do I begin to isolate the problem? The following is the SQL Statement in the Data Flow Source. Thank you for your help! - cdun2
DECLARE @CategoryTable TABLE
(ColID Int,
ColCategory varchar(60),
ColValue varchar(500)
)
--and fill it
INSERT INTO @CategoryTable
(ColID, ColCategory, ColValue)
SELECT
0,
LEFT(RawCollectionData,CHARINDEX(':',RawCollectionData)),
LTRIM(SUBSTRING(RawCollectionData,CHARINDEX(':',RawCollectionData)+1,255))
FROM Collections_Staging
--Assign an ID to each block of data for each occurance of 'Reason:'
DECLARE @ID int
SET @ID = 1
UPDATE @CategoryTable
SET [ColID] = CASE WHEN ColCategory = 'Reason:' THEN @ID - 1 ELSE @ID END,
@ID = CASE WHEN ColCategory = 'Reason:' THEN @ID + 1 ELSE @ID END
--Then put the data together
SELECT --cast to Nvarchar for MSAccess
a.ColID,
CAST(a.ColValue as Nvarchar(30)) AS OrderID,
COALESCE(CAST(b.ColValue as Nvarchar(30)),'') AS SellerUserID,
COALESCE(CAST(c.ColValue as Nvarchar(100)),'') AS BusinessName,
COALESCE(CAST(d.ColValue as Nvarchar(15)),'') AS BankID,
COALESCE(CAST(e.ColValue as Nvarchar(15)),'') AS AccountID,
COALESCE(CAST(SUBSTRING(f.ColValue,CHARINDEX('$',f.ColValue)+1,500)AS DECIMAL(18,2)),0) AS CollectionAmount,
COALESCE(CAST(g.ColValue as Nvarchar(10)),'') AS TransactionType,
CASE
WHEN h.ColValue LIKE '%Matching Disbursement%' THEN NULL
ELSE CAST(h.ColValue AS SmallDateTime)
END AS DisbursementDate,
--COALESCE(h.ColValue,'') AS DisbursementDate,
CASE
WHEN i.ColValue LIKE '%Matching Disbursements%' THEN NULL
WHEN CAST(LEFT(REVERSE(i.ColValue),4)AS INT) > 1000 THEN CAST(i.ColValue AS SmallDateTime)
WHEN LEFT(REVERSE(i.ColValue),4) = '1000' THEN NULL
END AS ReturnDate,
--COALESCE(i.ColValue,'') AS ReturnDate,
COALESCE(CAST(j.ColValue as Nvarchar(4)),'') AS Code,
COALESCE(CAST(k.ColValue as Nvarchar(255)),'') AS CollectionReason
FROM @CategoryTable a
LEFT JOIN @CategoryTable b ON b.ColID = a.ColID AND b.ColCategory = 'Seller UserId:'
LEFT JOIN @CategoryTable c ON c.ColID = a.ColID AND c.ColCategory = 'Business Name:'
LEFT JOIN @CategoryTable d ON d.ColID = a.ColID AND d.ColCategory = 'Bank ID:'
LEFT JOIN @CategoryTable e ON e.ColID = a.ColID AND e.ColCategory = 'Account ID:'
LEFT JOIN @CategoryTable f ON f.ColID = a.ColID AND f.ColCategory = 'Amount:'
LEFT JOIN @CategoryTable g ON g.ColID = a.ColID AND g.ColCategory = 'Transaction Type:'
LEFT JOIN @CategoryTable h ON h.ColID = a.ColID AND h.ColCategory = 'Disbursement Date:'
LEFT JOIN @CategoryTable i ON i.ColID = a.ColID AND i.ColCategory = 'Return Date:'
LEFT JOIN @CategoryTable j ON j.ColID = a.ColID AND j.ColCategory = 'Code:'
LEFT JOIN @CategoryTable k ON k.ColID = a.ColID AND k.ColCategory = 'Reason:'
WHERE a.ColCategory = 'Order ID:'
I need to copy the following columns from my Employee table in my Performance DB to my Employee table in my VacationRequest DB: CompanyID, FacilityID, EmployeeID, FirstName, LastName, [Password] = 'nippert', Role = 'Employee' I tried the advice on this website but to no avail:http://www.w3schools.com/sql/sql_select_into.asp
View 1 Replies View Relatedselect * into dbo.ashutosh from attribute where 1=2
"USE WHERE 1=2 TO AVOID COPYING OF DATA"
//HERE "ASHUTOSH" IS THE NEW TABLE NAME AND "ATTRIBUTE" IS THE TABLE WHOSE REFERENCE IS USED//
//the logic is to use where clause with 1=2 which will never be true and hence it will not return any row//
I have "inherited" a project working on a SQL 2000 database. The project calculates commissions based on data from an invoice header table and an invoice details table. The goal is to extract data from the primary database tables, perform limited manipulations, and store the resultant data into a table in a different database for reference and reporting. I have the query complete that extracts and manipulates the data, but I am stuck in trying to add this data to the final storage/reporting table. I would also like to do error checking to be certain that a record is not "re-inserted" from the source data to the destination table. Thanks in advance, Barry
View 3 Replies View RelatedIs it possible to easily copy data from one table to another if the data types don't match. I know you can do a INSERT INTO table1(col1,col2) SELECT (col2,col7) FROM table2 if the data types match but is there a way to do this if they don't. I'm not trying to copy date times into bit fields or anything. I just have an old table that I built when I really didn't know what I was doing now I at leastthink I have a better understanding of what data types to use, so I was wanting to move the data in the orignal table to my new one. Most of the fields in the olddatabase are text datatypes and the new database is nvarchar(50) data types. Thanks for any suggestions.
View 4 Replies View RelatedHi all,
I got a situation here.....
From a source table (in SERVER1) I get ids of candidates and from another source (in SERVER2) I get their CVs (text files stored in various Folders). My destination table (in SERVER3) has two fields, CandidateId & CandidateCV.
I have to transfer the data in above fashion for nearly 1 million records.
How can I write a DTS package which picks up the text file from SERVER2 based on the CandidateId which comes from SERVER1? Probably I need some kind of looping mechanism which changes the candidate id & his CV file.
Can anyone help???
Thanks...
I need to copy data from one table into another table. The field names are NOT the same:
I need to INSERT
Table 1 fields:
cdescurl
cname
cdescription
cimageurl
category
cprice
INTO
Table 2:
product_url
name
description
image_url
category
price
How do I do this? Thank you in advance for any help you can give me!
I downloaded a day's worth of data into a single table first and named it as Full_Day_Data_Table.(10,000 records)
Later for some other purpose, downloaded the same day's data into five small tables.
Now when I compare the total row count of Full_Day_Data_Table vs Sum of row counts of five small tables, the row count does not match.
So, I would like to know the records that exists in Full_Day_Data_Table and not in small tables.
Lets say we are executing this query below to retrieve each customer and the amount associated to a table
"INSERT INTO tblReceiptDue (Dealer, Amount) SELECT CustomerName, SUM(CASE WHEN VoucherType = 'Sales' then Outbound ELSE - Inbound END) AS AMOUNT from
tblSaleStatementCustomer WHERE CustomerType = 'Dealer' GROUP BY CustomerName"
Which display the data like below
DEALER AMOUNT
------------------------------------------------
ABC 2000
XYZ 1000
However I have one more table TABLE2 which contains two columns
DEALER OPENING
-------------------------------------------------------
ABC 5000
XYZ 7000
I want to modify my query in such a way that AMOUNT column should also add
OPENING from TABLE2 So that I must get the result like below
DEALER AMOUNT
------------------------------------------------
ABC 7000
XYZ 8000
To setup some data in some new tables in t-sql 2012, I need to create a relationship between 2 tables were data is obtained from an inventory file. The inventory file will be loaded to sql server 2012 from an excel spreadsheet.
1. Columns that will be loaded to the first table are:
1. Inventory category number,
2. Inventory date,
3. Inventory Category total amount, and
4. Inventory category quantity on hand.
This table will have a column called Item number. This will need to be the value of item number that is in the second table.
2. Columns that will be loaded to the second table are:
1. Item Number,
2. item date,
3. Item price, Item quantity on hand.
Thus can you show me the sql that will load the table into both tables? This sql would also need to show how to obtain the values of item number from the second table and place that value into the first table.
i have these two tables
create table [dbo].[test1](
[test1_id] [int] identity(1,1) primary key,
[test2_id] [int] not null
)
[code]...
I want to insert the data into two tables in one insert statement. How can i do this using T-SQL ?
Transfer tables with Data from one database to another one on a same server?
View 10 Replies View RelatedI have a Problem with my SQL Statement.I try to insert different Columns from different Tables into one new Table. Unfortunately my Statement doesn't do this.
If object_ID(N'Bezeichnungen') is not NULL
Drop table Bezeichnungen;
GO
create table Bezeichnungen
(
Artikelnummer nvarchar(18),
Artikelbezeichnung nvarchar(80),
Artikelgruppe nvarchar(13),
[code]...
I am tying to join tables to get the result but it is not showing any data,i have shipping address column in both tables I want to show data in single column I don't know how to display.
select r1.ProductID,r1.ProductName,r1.PMNO ,r.ShippingInfo,r.ShippingAddress ,rs.ShippingAddress from R2InventoryTable r1 inner join RecycleComponents1Table r on r1.ProductID=r.ProductID
inner join
ReSaleorReStock1Table rs on r1.ProductID=rs.ProductID
where r1.HazMat='No' order by ProductID
If I join two tables it is showing data
select r1.ProductID,r1.ProductName,r1.PMNO ,r.ShippingInfo,r.ShippingAddress from R2InventoryTable r1 inner join RecycleComponents1Table r on r1.ProductID=r.ProductID
where r1.HazMat='No' order by ProductID
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.