I am trying to get count of records by month wise when they select year .It was showing the out put correctly but its showing months arer in numbers,but I want to display Jan,Feb ...
SELECT DISTINCT Standard, COUNT(Standard) AS Total,month(ReportDate) Month
FROM CPTable where
year(ReportDate) = '2015'
GROUP BY Standard, Standard ,
month(ReportDate)
Let's say if the date is 01/01/2015 till 01/01/2016
I want split these dates monthly format wise and then use them in variable in cursors to loop
For an example Monthly date should be 01/01/2015 and 01/31/2015 and use these two values in 2 variables and make a loop until it never ends whole date range which is 01/01/2016
Example table structure: Id int, PK Name varchar AddDate smalldatetime
Sample data: Id Name AddDate 1 John 01/15/2005 2 Jane 01/18/2005 . . . 101 Jack 01/10/2006 102 Mary 02/20/2006
First, I need to find the month which has the most records, I finally produced the correct results using this query but I am not convinced it's the most efficient way, can anyone offer a comment or advice here?
select top 1 count(id), datename(mm, AddDate) mth, datepart(yy, AddDate) yr from dbo.sampletable group by datename(mm, AddDate), datepart(yy, AddDate) order by count(id) desc
Also, I'm really having trouble trying to get the overall average of records per month. Can anyone suggest a query which will produce only one number as output?
I want to find out count of same UserID used within 7 days for that month.
For example, in below scenario, UserID 458's 1st TTo is 8/26/2015 and it used again on 8/28/2015 which is less than 7 so result should be 1. (DateDiff between 1st TTo and 2nd Tfrom should be less than 7) This is for month of Aug.
Im trying to get query by selecting the month from dropdownlist and display the records .by using the below query I need to enter the date in tecxtboc then it will show the output
select Standard, Total, MonthName from (SELECT Standard, COUNT(Standard) AS Total, datename(month, ReportDate) as [MonthName] FROM CPTable where ReportDate >= @ReportDate
My table is test and I have an ID and DateTest columns
I would like to count the weeks with more then one record.
So far I got this and return the weeks with 1 record per week. How can I count the weeks with more then one record
select sum(c) from ( select c = count( id) over (partition by id, datepart(week, DateTest)) from test where id = '1' and DateTest >= '7-7-2015' ) a where c = 1
updating the # of Payer from below query to match with the # of rows for each payer record. See the Current and desired results below. The query is currently counting the # of rows for all payers together and updating 3 as # of payers. I need it to count # of rows for each payer like shown inDesired result below. It should be showing 1 for first payer and 2 for 2nd & 3rd based on # of times each payer is repeated..
SELECT b.FILING_IND, b.PYR_CD, b. PAYER_ID, b. PAYER_NAME,a.CLAIM_ICN, (Select Count(*) From MMITCGTD.MMIT_CLAIM a, MMITCGTD.MMIT_TPL b , MMITCGTD.MMIT_ATTACHMENT_LINK c where a.CLAIM_ICN_NU = c.CLAIM_ICN and b.TPL_TS = c.TPL_TS and a.CLAIM_TYPE_CD = 'X'
In the above data, no record exist for 201403,201404,201405, query I wrote will give only the data for which there LeftCount exists, but I am looking for a query which get the data in the below format.
I've been able to get this select query to work, but I'm not sure how to modify it to turn it into a DELETE query:
USE QSCTestENG select p.[testid], COUNT(c.[testid]) FROM [dbo].[tblTestHeader] p left outer join [dbo].[tblTestMeasurements] c ON p.[testid]=c.[testid] where p.[model] = 'XPPowerCLC125US12' group by p.[testid] having COUNT(c.[testid]) <>48;
I have a CTE returning a recordset which contains a column SRC. SRC is a number which I use later to get counts and sums for the records in a distinct list.
declare@startdate date = '2014-04-01' declare@enddate date = '2014-05-01' ; with SM as ( SELECT --ROW_NUMBER() OVER (PARTITION BY u.SRC ORDER BY u.SRC) As Row, u.SRC,
[Code] ....
-- If Referral start date is between our requested dates
ref.Referral_Start_Date between @startdate and @enddate
OR
-- Include referrals which started before our requested date, but are still active during our date range.
(ref.Referral_Start_Date < @startdate and (ref.Referral_End_Date > @startdate OR ref.Referral_End_Date IS NULL )) ) INNER JOIN c_sdt s on s.Service_Delivery_Type_Id = u.Service_Delivery_Type_Id AND s.Service_Delivery_Unit_Id = 200 ) SELECT count(distinct (case SRC when 91 then client_number else 0 end)) As Eligable_91,
I need to get the groupwise distinct count . For eg. Lets assume we have group as Category and under this there are two childs Category1 and Category2. I need the distinct count under Category1 and Category2 separately with the count resetting after Category1 and Category2. Any help will be greatly appreciated.
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015' DECLARE @enddate date = '10-31-2015' DECLARE @afterTime time = '17:00' SELECT General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
I would like to AUTOMATICALLY count the event for the month BEFORE today
and
count the events remaining in the month (including those for today).
I can count the events remaining in the month manually with this query (today being March 20):
SELECT Count(EventID) AS [Left for Month], FROM RECalendar WHERE (EventTimeBegin >= DATEADD(DAY, 1, (CONVERT(char(10), GETDATE(), 101))) AND EventTimeBegin < DATEADD(DAY, 12, (CONVERT(char(10), GETDATE(), 101))))
Could anyone provide me with the correct syntax to count the events for the current month before today
and
to count the events remaining in the month, including today.
I have two tables Costtable (Id,ResourceId, Amount,Date) and ResourceTable (ResourceId,Name) which shows output as below.
I want to show 0 amount for rest of the name in case of September. For e.g. if rest of the Resources does not appear in cost table they should appear 0 in amount
My Desired output
My current query
SELECT RG.Id AS Id, RG.Name AS Name, ISNULL(SUM(AC.Amount), 0) AS Amount, RIGHT(CONVERT(varchar(10), AC.[Date], 105), 7) AS [YearMonth]
The below query is for november month: (Apr to Nov)
select * from maintable where period between '01-04-2014' and '01-11-2014' then for December month : (Apr to Dec)
So I want to pass second row
select * from maintable where period between '01-04-2014' and '01-12-2014' ..... .... select * from maintable where period between '01-04-2015' and '01-12-2015'
Like wise I want to get month wise data of YTM data.
i want to show data Party Name and Time interval wise. here is my table from where i will fetch data. so pasting table data here.
Call start Call duration Ring duration Direction Is_Internal Continuation Party1Name Park_Time ------------------------- ---------------- ------------- --------- ----------- ------------ --------------- ----------- 2015/06/08 08:06:08 00:02:28 2 I 0 0 Emily 0 2015/06/08 08:16:38 00:00:21 0 I 0 1 Line 2.0 0 2015/06/08 08:16:38 00:04:13 5 I 0 0 Jen 0
[code]...
now i am not being able to cross join this CTE with my table to get data party name wise and time interval wise. say for if no data exist for a specific time interval then it will show 0 but each party name should repeat for time interval 9:00:00 - 9:30:00 upto 17:30:00. i like to add what filter need to apply to get data for incoming, outgoing, call transfer and miss call.
For Incoming data calculation where direction='I' and Is_Internal=0 and continuation=0 and RIGHT(convert(varchar,[call duration]),8)<> '00:00:00' For outgoing data calculation
I am trying to get the number of rows for each month.
table name:sitez ID Name crDate access =========================== 1 Bob .. 2014-01-11 .. 1 2 Jerry .. 2014-01-22 .. 2 3 Jim .. 2014-05-06 .. 1 4 Jason .. 2014-12-11 .. 1 5 Jen .. 2014-11-21 .. 3
I am using the results to make a bar graph so I am querying the database for a given year and expecting 12 results back (running SQL 2012).
Select count(*) as ttl FROM sitez WHERE year(crdate) = 2014 and access = 1 group by all month(crdate)
This should return: 1 0 0 0 1 0 0 0 0 0 0 1
However when testing the script I was only getting back: 1 1 1
which didn't knowing which months were 0
By changing the GROUP BY to GROUP BY ALL, it now puts in the zeroes. However I'm still having issues with incorrect results.
When I query the database, the results for December 2014 shows '13' when I execute:
Select count(*) as ttl FROM sitez WHERE year(crdate) = 2014 and access =3 group by all month(crdate)
There are ZERO rows made with a year of 2014 and an access of 3.I verified this by going a straightforward select * from sitez where crdate = 2014 and access = 3
Why I'm seeing ghost results?
All I need is 12 results, ordered by crdate month.
Need query to expand the count from a month to the entire year in 2013 .Below is my query where I got the values for a month in 2013 ,How do I expand on this query so that it generates for the entire 2013
Query SELECT RD.RPTDESC,Count(SR.RPTDESC) AS ReportCount,sum(SR.Hrs) as ProdHours,Sum(SR.Mins) as ProdMins, (sum(SR.Hrs)*60+ Sum(SR.Mins)) as TotalProdTime, (sum(SR.Hrs)*60+ Sum(SR.Mins)/Count(SR.RPTDESC)) as AverageProdTime,sum(SR.TriageHrs) as TriageHours,Sum(SR.TriageMins) as TriageMins, (sum(SR.TriageHrs)*60+ Sum(SR.TriageMins)) as TotalTriageTime,(sum(SR.TriageHrs)*60+ Sum(SR.TriageMins)/Count(SR.RPTDESC)) as AverageTriageTime
Also when I am running for months individually there are certain months where for certain reportids there is no data returned,I would like to populate all zeroes for that row for example report id 306 in February and how to get decimal values in average fields.
I have a few million rows of a data in a table that store indexing information for scanned customer documents. Fields like last name, first name, document description (descript), document type and scan date (scandate).
I want to be able to query the document description column where it'll show how many times each document description was scanned/used over the course of the last 6 months or year.
I have a query that counts the number of pay checks received in a month, but I need to compare that to the number of actual paydays in a month. If we were on a set pay schedule (i.e. the 15th of each month) it would be easy. Unfortunately that's not the case. We are paid biweekly on Fridays and our last pay day was April 4th.
So I need to know how many pay periods were in a specified month. For example, April would have 2 (April 4th and 18th), May would have 3 (May 2nd, 16th, and 30th), etc.
I am trying to make a query on one table, an invoices table, and Iwant to see how many orders are in each monthYear Month Count---------------------------2006 01 802006 02 1102006 03 208....I cant just do Distinct MonthPart because we have years, so to getthese three columns, is just beyond my SQL skills.Any suggestions or pointer would be greatly appreciated!!!!
how to return the 3 month rolling average count per username? This means, that if jan = 4, feb = 5, mar = 5, then 3 month rolling average will be 7 in April. And if apr = 6, the May rolling average will be 8.
Columns are four:
username, current_tenure, move_in_date, and count.
DDL (create script generated by SSMS from sample table I created, which is why the move_in_date is in hex form. When run it's converted to date. Total size of table 22 rows, 4 columns.)
CREATE TABLE [dbo].[countHistory]( [username] [varchar](50) NULL, [current_tenure] [int] NULL, [move_in_date] [smalldatetime] NULL, [Cnt_Lead_id] [int] NULL ) ON [PRIMARY] GO SET ANSI_PADDING OFF GO
I am writing a query to display the count of products when a month is the primary month (Month where large sales happened)..Please consider the following query..
With Member ProductRank as Rank([Date Due].[Calendar].currentmember,TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount])) Member PrimaryProd as Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1)) Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,bdesc) on 1 from [Sales]
Output:
It runs for 13 seconds on my laptop. I have modified the query to get the results fast like With
Set MySet as TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount]) Member ProductRank as Rank([Date Due].[Calendar].currentmember,MySet) Member PrimaryProd as Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1)) Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,Bdesc) on 1 from [Sales]
Output:
This query runs instantly and result is not the same. Am I missing something here?
Today's month is 9 as in September. How can I retrieve records entered last month?This is what I got so far... WHERE (Classes.CLWhenDt >= DATEADD([MONTH], - 1, GETDATE()))
