This is my syntax, but it keeps presenting an error of 'Invalid Column name Last Resort
Select fb.foo, fb.man, cz.choo, 'Hi' As [Last Result]
From foobar As fb
Inner Join chezter As cz
On fb.username = cz.username
and [fb].[Last Result] = [cz].[Last Result]
i have an aliased column in an sql statement that works fine whendisplaying its output in a datagrid, but when I transfer the sqlstatement into a stored procedure , the datagrid can't see it. I get anerror "{"DataBinder.Eval: 'System.Data.DataRowView' does not contain aproperty with the name myaliasedcolumn." }
View 1 Replies View Related
This query demonstrates a problem I have run across:
USE AdventureWorks
GO
-- This query works fine.
SELECT DISTINCT FirstName AS Name1 FROM Person.Contact ORDER BY FirstName
GO
-- This query also works fine.
SELECT ISNULL(FirstName, '') AS Name1 FROM Person.Contact ORDER BY FirstName
GO
-- This query returns error 145
SELECT DISTINCT ISNULL(FirstName, '') AS Name1 FROM Person.Contact ORDER BY FirstName
GO
The last query returns the error "ORDER BY items must appear in the select list if SELECT DISTINCT is specified".
It will work if I change ORDER BY to use "Name1" instead of "FirstName", but in the situation I have at hand, the query is generated by third-party software and I don't have the ability to change it.
Can anyone explain why what's going on here? Oddly, this same query will work if I run it against SQL Server 2000.
I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
At present I have a logic implemented like below code example where I can get a combination of columns cid and ani in 'config' table to which I have to map columns cid and ani present in my 'current' table.
Now, a new column pid is added to both 'config' and 'current' tables, like
alter table config add pid integer
alter table current add pid integer
Now I can have data in a combination of cid and ani (where pid can be NULL) or cid and pid (where ani can be NULL) or a row where all cid, ani and pid can have values. In this scenario, how should I make the changes in the current implementation given below?
create table current (cid integer, ani integer, resetdate datetime, threshold integer)
create table config (cid integer, ani integer, resetdate datetime, threshold integer )
SELECT cid, ani from
(
SELECT A.cid,
A.ani,
CASE WHEN C.cid is null then B.resetdate ELSE C.resetdate END AS resetdate,
[Code] ....
create the column "Region" like this Picture?.
View 26 Replies View RelatedI have a data with mutliple esn but different auditdate and opid. I will pull this data filtering by date and opid. My requirements is not to include the opid = 51 but need to get the desired opdesc for this esn that contains opid=51.
See below sample ddl and desired result. I dont want do include the opid = 51 because it will create a duplicate in transaction instead retain the opid 5
example: esn T9000000000019829505 has multiple rows with different auditdate and opid. retain the records for opid is equal to 5 but get the opdesc for opid is equal 51.
reate table #test
(esn nvarchar(35), dateaudit datetime, opid int)
insert into #test(esn,dateaudit, opid)values('352452060499834','2015-05-12 20:32:39.490',5)
insert into #test(esn,dateaudit, opid)values('352452060499834','2015-07-06 17:35:14.210',5)
insert into #test(esn,dateaudit, opid)values('T9000000000019829505','2015-01-14 15:18:45.620',5)
[Code] ....
Desired Result:
esn-------------------dateaudit----------------opid--opdesc--rn
352452060499834------2015-05-12 20:32:39.490---5---Shipping--1
352452060499834------2015-07-06 17:35:14.210--5---Shipping--1
T9000000000019829505--2015-01-14 15:18:45.620--5---Scrap-----1
OR
esn-------------------dateaudit----------------opid--opdesc--rn--remarks
352452060499834------2015-05-12 20:32:39.490---5---Shipping--1---shipping
352452060499834------2015-07-06 17:35:14.210--5---Shipping--1---shipping
T9000000000019829505--2015-01-14 15:18:45.620--5---Shipping--1---Scrap
How to create column "Region" like this Picture.
View 16 Replies View RelatedIm trying to insert the values from this query into a table, so I can later check the history of memory usage:
SELECT
[total_physical_memory_kb] / 1024 AS [Total_Physical_Memory_In_MB]
,[available_page_file_kb] / 1024 AS [Available_Physical_Memory_In_MB]
,[total_page_file_kb] / 1024 AS [Total_Page_File_In_MB]
,[available_page_file_kb] / 1024 AS [Available_Page_File_MB]
,[kernel_paged_pool_kb] / 1024 AS [Kernel_Paged_Pool_MB]
,[kernel_nonpaged_pool_kb] / 1024 AS [Kernel_Nonpaged_Pool_MB]
,[system_memory_state_desc] AS [System_Memory_State_Desc]
FROM [master].[sys].[dm_os_sys_memory]
What I'm missing is a way to insert the current timestamp every time I insert to the table.My plan is to use the insert into command.
I need to create a sequential aggregate of a column using sum in tsql.
I want a column that will sum up all hours work by transaction date.
for example
Monday my hours work will be 8 and therefore my total transaction hours will be 8.
Tuesday my hours work will be 8 but I want the total hours of my total transaction hours to 16.
Wed my total hours work will be 5 and I want the total hours of my total transaction hours to 21. etc.
Select myname, weekday, hours worked, Totalhours_ToDate =Sum(hours worked)from table
I'm wanting to create reports in SSDT 2012 which is connected to a 2008R2 database. I want to have parameters on for my reports where a user is able to select a year such as 2014. Unfortunate my table containing the data has two columns with a date value. the first is of the int type and contains an epoch formatted date. The second is a varchar type and shows the date as 2015-07-01 08:00:00. I would like to be able to write a query to return the year, monthnumber and daynumber from either of these columns.
View 5 Replies View RelatedI was writing a query using both left outer join and inner join. And the query was ....
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
INNER JOIN Production.Categories AS C
[code]....
However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases
i.e..
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
LEFT OUTER JOIN Production.Categories AS C
ON C.categoryid = P.categoryid)
ON
S.supplierid = P.supplierid
WHERE
S.country = N'Japan';
The result i got was same,i.e
supplier country productid productname unitprice categorynameSupplier QOVFD Japan 9 Product AOZBW 97.00 Meat/PoultrySupplier QOVFD Japan 10 Product YHXGE 31.00 SeafoodSupplier QOVFD Japan 74 Product BKAZJ 10.00 ProduceSupplier QWUSF Japan 13 Product POXFU 6.00 SeafoodSupplier QWUSF Japan 14 Product PWCJB 23.25 ProduceSupplier QWUSF Japan 15 Product KSZOI 15.50 CondimentsSupplier XYZ Japan NULL NULL NULL NULLSupplier XYZ Japan NULL NULL NULL NULL
and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.
I have a user that is requesting sa rights on a test server. I prefer to give him aliased
dbo rights. What is the difference between the two?? What can he not do with dbo
that he could with sa??
Hi there,
I'm trying to calculate a sort of rating:
select Player,
sum(case when Event = 'S' then 1.0 else 0.0 end) as Success,
sum(case when Event in ('S', 'F') then 1.0 else 0.0 end) as Attempts,
case when Attempts > 0 then Success / Attempts else NULL end as Rating
from EventList
group by Player
It says comlumn names are invalid. Any idea?
Thanks,
Bjoern
The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION.
Hello.
Can I find out the password of an aliased databases user? We have a third party app that uses one but it has no corresponding server login so I don't know what the password is set to and I need to change it.
Thanks
How to set up a specific aliased instance name. I have installed two identical named instances on a server called LONPOCSQL. The instance names are FINPROD and FINREP, so when connection to them remotely I connect to LONPOCSQLFINPROD or LONPOCSQLFINREP. My question is how can I configure it so that I can connect remotely to the instances in by referencing them as FINPRODFINPROD and FINREPFINREP?
The reason for this is that I need to replace a very old system where the applications connect to the sql servers by referencing them as FINPRODFINPROD and FINREPFINREP respectively. I'm trying to set up a 2-node SQL alwayson AG cluster for HA+DR with one server in the prod DC and the other in DR. I need both instances to live one the same box.
1. As far as I'm aware SQL Aliases only work when the connection is local, remote connections fail
2. I can't create a DNS alias called "FINPRODFINPROD" and point it at a listener name as slashes "" are not allowed in DNS CNAMEs
3. My old boss once built a SQL 2008 R2 failover cluster with two instances on it called "lonsql40lonsql40" but there is no documentation on how he did it and I can't find anything on the web
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedI have 2 tables:
create table #InsuredLoc (
PolGK int,
InsuredLocGK varchar(20),
InsuredLocEffDt datetime,
InsuredLocType varchar(20),
InsuredLocStatus varchar(20),
InsuredLocAddress varchar(50),
PolEdrGk varchar(20),
[Code] ...
I will need to join the #InsuredLoc table to the #PolicyEndorsement table using PolGk and PolEdrGk and get the min(BkgDt) and min(PolEdrRowUpdateDt) for the distinct list of InsuredLocType, InsuredLocStatus, and InsuredLocAddress fields from the #InsuredLoc table above.
I will also need the min(InsuredLocEffDt) and the max(InsuredLocUpdateDt) from the #InsuredLoc table for those records. So after the first run, i should get the following:
I tried to use CTE's with ranking, but some records are dropping off and I'm not sure why.
I am having issues trying to write a query that would provide me the unique GUID numbers associated with a distinct PID if the unique GUID's > 1. To summarize, I need a query that just shows which PID's have more than one unique GUID. A PID could have multiple GUID's that are the same, I'm looking for the PID's that have multiple GUID's that are different/unique.
Table1
GUID PID
GUID1 PID1
GUID1 PID1
GUID1 PID1
GUID2 PID1
GUID3 PID2
GUID3 PID2
GUID3 PID2
The result of the query would only have PID1 because it has two unique GUID's. PID2 would not be listed has it has the same GUID3 in each row.
Result:
PID1
I am trying to JOIN table on datetime column truncated to full minutes with other table, where I store time intervals (in order to have all minutes in result even when there was no event in main data table).
SELECT
dateadd(minute, datediff(minute, 0, StartTime), 0) as StartTimeMinute
,ApplicationName
,COUNT(*) as Requests
FROM dbo.Profiler as p INNER JOIN dbo.MinuteIntervals as i ON i.TIMEVALUE = p.StartTimeMinute
WHERE EventClass IN (10,12)
GROUP BY dateadd(minute, datediff(minute, 0, StartTime), 0), ApplicationName
ORDER BY StartTimeMinute
How to join on p.StartTimeMinute? I do understand why this doesn't work, as p.StartTimeMinute is calculated in my query, so JOIN cannot find it in original p table.
SELECT A.EmpId,A.IncidentDate
FROM EmployeePoints1 as A
WHERE IncidentDate=
(SELECT MAX(IncidentDate)
FROM EmployeePoints1
WHERE EmpId = A.EmpId) AND (DATEADD(day,28,DATEADD(WEEK, DATEDIFF(WEEK, 0,A.IncidentDate), 0)) < DATEADD(WEEK, DATEDIFF(WEEK, 0,GetDate()), 0)) AND (A.IncidentCode = 'I' OR A.IncidentCode = 'A')
LEFT JOIN EmployeeTotalPoints1 ON EmployeeTotalPoints1.EmpId = A.EmpId
I am trying to left join another table but I got
Incorrect syntax near the keyword 'LEFT'.
I am doing some audit and i have below query, how can i get rid of duplicates from the below query any T SQL to get rid of duplicates...
I am using SP_Who2 and sql server Audit for auditing all data happening on sql server databases and dumping them to tables Audit_DBAudit abd Audit_sp_who2 and from then i am trying to get data which is not repeating/duplicate ...
SELECT
A.ProgramName
,a.HostName,[Server_principal_name],[Server_instance_name],[Database_name],[Object_name],F.Statement
FROM Audit_DBAudit as F
Join [Audit_sp_who2] AS a
on LTRIM(RTRIM(F.server_principal_name))=LTRIM(RTRIM(A.Login))
i have two tables Table one have 2 columns id and value
id value
1 Dell
2 Hp
B2 Hp-mini
B3 Hp-lapTop
3 Acer
the second table have 3 clomuns id,name,idTable
1 TeaBou B
2 Mark B
3 Jack 1
4 Piere 2
5 Jean 2
6 Mark 3
i tried this query
select*from table1 t1 ,table2 t2
where t1.id=t2.idTable
i had some data but also i need to include the person who have the B product.
I have a table like this :
reg.no | description | start_date | end_date | load_date
I want to join this table with itself on reg. no. But not all the rows in table must be joined.
But for example, rows with load_date 01-07-2015 to be joined with rows with load_date 02-07-2015. And the rest of the rows should not used in join (for example, rows having other load_dates)
Is this possible ? and how?
I have the following 2 tables:
Location:
Policy:
1 Location can be attached to many policies.
I need to create a query to get 1 row per location and get the minimum PolicyBookingDt and RowUpdateDt from the policy table. All the attributes from the Location table should also be from the Policy that has the minimum PolicyBookingDt.
So from the above example, i need to get the following:
Getting a little confused on how to create the syntax for this.
My CTE is failing and I don't know why...Is there a Common Table Expression column name length restriction???
View 2 Replies View RelatedI have a SQL Query issue you can find in SQL Fiddle
SQL FIDDLE for Demo
My query was like this
For Insert
Insert into Employee values('aa', 'T', 'qqq')
Insert into Employee values('aa' , 'F' , 'qqq')
Insert into Employee values('bb', 'F' , 'eee')
Insert into Employee values('cc' , 'T' , 'rrr')
Insert into Employee values('cc' , 'pp' , 'aaa')
Insert into Employee values('cc' , 'Zz' , 'bab')
Insert into Employee values('cc' , 'ZZ' , 'bac')
For select
select col1,MAX(col2) as Col2,Max(Col3) as Col3
from Employee
group by Col1
I supposed to get last row as
cc Zz bab
Instead I am getting
cc Zz rrr
which is wrong
#EMAIL_ADDRESSES which hold records similar to the following (CREATE code below):
View 6 Replies View RelatedIs there a way we can get Table and Column name in separate column using PIVOT or something?Right now what i have is:
Text QueryPlan Plan_handle
Name Value
select id,name,Address from person <showPlznXML... 010101 Table Person
select id,name,Address from person <showPlznXML... 010101 column id
select id,name,Address from person <showPlznXML... 010101 Table Person
[code]....
How I can calculate the 'SUM of 100' of EDSUM column for EDCOST column. Every EDCOST should have sum of 100 on the calculation of EDSUM. I just want to know which is the EDCOST which has <>sum of 100.
Create table #sum (ED numeric, EDCOST numeric, EDName char(6), EDSum numeric, EDCode char(2))
Insert into #sum values (121, 2000,'HLMO',98,'DT')
Insert into #sum values (122, 2000,'HLMT',2,'DT')
Insert into #sum values (123, 2001,'HLMO',100,'DT')
Insert into #sum values (124, 2002,'HLMD',97,'DT')
[Code] ...
Expeced Output:
ED EDCOST EDName EDSum EDCode
126 2003 HLMR 98 DT
130 2005 HLMR 98 DT
Please refer to the below query. I want to filter inner join rows based on outer query column value (refer to bold text).
SELECT M.MouldId, SI.StockCode, MI.Cavity, MI.ShotCounter, CQ.SumOfCastedQty as CastedQty, MI.CounterStartup
FROM MouldItem MI
JOIN (SELECT JD.MouldId, JC.StockCode, SUM(JS.CastedQty) AS SumOfCastedQty
FROM JobCasting AS JS INNER JOIN JobCreationDet AS JD ON JS.JobDetId = JD.Uniid INNER JOIN JobCreation AS JC ON JD.JobIdx = JC.Uniid
[Code] ....
I have table A with colums ID and Product. I have table B with ID (same as table A) and revenue of product.
I need to update the field Product of table A with the revenue of table B.
I'm confuse with the update joining both tables. I tried this, but obviously has an error:
Update A set Product=B.Revenue where A.ID=B.ID
I need to Filter Employees by Available Date and grab their Basic contact information
I used Join to Join both tables but I can't seem to find a way to only get data from employees where DateAv > SelectedDate.
I'm using this in a SqlCommand with C#.
SELECT " EmployeeNameTable.ID, EmployeeNameTable.FullName, EmployeeNameTable.DateAV,ContactTable.HomePhone, ContactTable.MobilePhone, ContactTable.Email FROM EmployeeNameTable INNER JOIN ContactTable On EmployeeNameTable.ID = ContactTable.ID OrderBy EmployeeNameTable.FullName"
This code loads all employees Successfully but it doesn't filter them by the DateAV Column which is in Date Format.