I want to add a custom column in a select statement that has a value to true or false based on other criteria.
SELECT [ID], [Name], [Description], [EmpID], [Employed] FROM [Employees]
Now, in the above example there is no [Employed] Column in my table but I want it to show true or false based on whether or not [EmpID] equals a certain value.
I am writing a query and have the bulk of it already written.Â
I am looking at a table that contains customer orders. There is a column named Customer_Order.Status Available values for this column is R, F, H, and C.
I'd like for my query to return all lines that have the value R, F, H.
My where clause is written like thisÂ
WHERE CUSTOMER_ORDER.SITE_ID = 'XXX' AND CUSTOMER_ORDER.STATUS = ('R','H','F')
I know I'm missing something....
I am trying to allow a user the ability to search a database and select from various fields to search, such as Keywords and Filename. I tried building something like this:
SELECT filenameFROM pictableWHERE (@searchby LIKE @searchwords)
It allows me to enter the two varables (keywords and test), but returns no rows. If I simply replace @searchby with 'keywords' (ensuring no spelling errors), then I get a return of one row. So this works:
SELECT filenameFROM pictableWHERE (keywords LIKE @searchwords)
Can someone tell me what is going on? I have tried all sorts of quotes and parens to no avail.
Thanks in advance.
I want to select custom format from table?
View 7 Replies View RelatedI am trying to SELECT data based on custom groups of that data. For example and in its simplest form:
SELECT COUNT(*)
FROMdbo.People
WHERE Current_Status = ‘A’
GROUP BY People_Code
The People_Code is the difficult part. The code represents the building that they work in. However, some buildings have multiple People_Codes. Kind of like multiple departments within a building.
For example:
Building NamePeople_CodeEmployee Count
Building A617535
Building B985665
Building C529212
Building C529932
Building C419816
Building D326974
Building D781024
Building E25365
Each building has a main People_code which, for this example, could be any one of the codes for the building. For example: Main code for building C can be 5292 and for building D it can be 7810.
Applying a variation (which is what I cannot figure out) of the SELECT statement above to this table, the result set for Building C must be the combined employee count of all three People_codes and must be represented by the main code of 5292 as a single row. Building D would have a row using code 7810 but will combine the employee count of codes 7810 and 3269.
I built a conversion table that would match up the main code with all of its related codes but just couldn’t seem to make it dance the way I want it to.
People_CodeNameGroupNameGroupPeopleCode
6175Building ABuilding A6175
9856Building BBuilding B9856
5292Building CBuildingCGroup5292
5299Building C AnnexBuildingCGroup5292
4198Building C Floor6BuildingCGroup5292
Etc…
The whole query is much more involved than just the simple SELECT statement used here, but if I can get this to work, I’m sure I can apply it to the full query.
Hi,
I have a table called emp, having 2 field name & sex
values are:
name sex
a 1
b 2
c 1
now i want to display the values in above table as like below...
name sex
a Male
b Female
c Male
How to do that...?
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
SELECT FirstSet.Country,FirstSet.[Month]
,ABC.ABC1
,DEF.DEF1
FROM (
SELECT [Answer Text]'Country',interview_start 'Month',[ID respondent],
[Code] ....
I didn't find whats problem with this code. Actually I try to create a select statement with with cte select statement. In cte clause my output ok but when I try to receive that output from write another select statement then its show error.
Msg 102, Level 15, State 1, Line 276
Incorrect syntax near ';'.
Msg 102, Level 15, State 1, Line 315
Incorrect syntax near ')'.
Msg 156, Level 15, State 1, Line 351
Incorrect syntax near the keyword 'as'.
How I can get the following Desired SELECT STATEMENT with the increment of Max(serial_no)+1. Date will be in quotation in desired SELECT STATEMENT. All data is same. Just changing the serial_no which will be Max(serial_no)+1.
Create table #seq (serial_no numeric, Scode numeric, Sdate datetime, SErr char(10))
insert into #seq values (1,1002,'10/10/2015','SEDT')
insert into #seq values (2,1005,'12/10/2015','PEFT')
insert into #seq values (3,1004,'1/1/2015','QEGT')
insert into #seq values (4,1008,'1/2/2015','TEWT')
insert into #seq values (5,1007,'3/10/2015','REDT')
Result from the above query
serial_no Scode Sdate SErr
1 1002 Â 10/10/2015 SEDT
2 1005 12/10/2015 PEFT
3 1004 1/1/2015 QEGT
4 1008 1/2/2015 TEWT
5 1007 3/10/2015 REDT
Desired SELECT STATEMENT Result with increment of serial_no  (Max(serial_no+1)
Select 6, 1002, '10/10/2015', 'SEDT'
Select 7, 1005, '12/10/2015', 'PEFT'
Select 8, 1004, '1/1/2015', 'QEGT'
Select 9, 1008, '1/2/2015' ,'TEWT'
Select 10, 1007, '3/10/2015', 'REDT'
I'm using sql 2008 and triying to build a dynamic sql script to split the records 50/50.I know using newid() with order by clause selects randomly but how should I build the select statement to split the data 50/50 so i don't need to run the script manually everytime ?
View 10 Replies View RelatedCreated a new scheduled job using Transact-SQL.
Running a basic script SELECT FROM WHERE
As of now, it places it into one column, for all the fields.Â
I need the fields to be placed in their respective columns. Tried saving it as .xls and .csv. Same issue. Running SQL Server 2008R2.
below is my original query
select Value = count(*) from dbo.testÂ
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
Everything about this query works except I'm trying to capture the @companyid (which is a variable) into a column in my table via my select statement.
My error is Invalid column name 'A113', etc. However it is the A113 I'm trying to insert into the first column of the table SAP_GLsummary
-- retrieves a list of gl balances from all companies
truncate table sap_glsummary
declare @companyID char(6)
declare c_company cursor for
select INTERID from dbo.GP_Interid
open c_company fetch next from c_company into @companyID
[Code] .....
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else
WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
I'm trying to delete the selected data from a table colum from a select statement.
This is the select statement
SELECTÂ RFC822Â FROMÂ SQLGOLDMINE.DBO.MAILBOX MB WHERE ((MB.CREATEON >= '2014-07-24' AND MB.CREATEON <= '2015-07-24') OR (MB.MAILDATE >= '2014-07-24' AND MB.MAILDATE <= '2015-07-24')) AND (MB.MAILREF LIKE '%auction notification
& invitation%')
What the delete statement would look like. I've tried replacing Select with delete from but get a sytax error.
Is there any reason to use the WITH statement rather than putting a SELECT in a JOIN? Does one method perform better or is it just a matter of preference?
View 3 Replies View Relatedi dont't know how to select row with max column value group by another column. I have T-SQL
CREATE PROC GET_USER AS
BEGIN
SELECT T.USER_ID ,MAX(T.START_DATE) AS [Max First Start Date] ,
MAX(T.[Second Start Date]) AS [Max Second Start Date],
T.PC_GRADE,T.FULL_NAME,T.COST_CENTER,T.TYPE_PERSON_NAME,T.TRANSACTION_NAME,T.DEPARTMENT_NAME ,T.BU_NAME,T.BRANCH_NAME,T.POSITION_NAME
FROM (
[code]....
Hello All,Is there a way to run sql select statements with column numbers inplace of column names in SQLServer.Current SQL ==> select AddressId,Name,City from AddressIs this possible ==> select 1,2,5 from AddressThanks in Advance,-Sandeep
View 1 Replies View RelatedHi All,
I am trying to write a Transact-SQL statement and am having no success. I have a customers table that has some duplicate Customer Numbers in it, however the records do have a unique Reference Number. I am trying select all records that match a list of Customer Numbers but if there are more than 1 matching Customer Number I only want the one with the largest Reference Number.
My BASIC Select Statement is:
SELECT Cust_Ref_No, Customer_No, Customer_Name, Address1,
Address2, Suburb, State, Postcode, Phone
FROM Customers
WHERE Customer_No IN
(SELECT Customer_No FROM temp_Customers)
Much to my HORROR I found that what I am trying to do is simple in MS Access using the “First” Function – Such as below:
SELECT First(Cust_Ref_No) AS Cust_Ref_No, Customer_No
FROM Customers
GROUP BY Customer_No
ORDER BY First(Cust_Ref_No), Customer_No;
There appears to be no “First” Function in Transact-SQL. Is someone able to show me how to achieve the same results in Transact-SQL as I can get with MS Access (I’d HATE to think that MS Access has more functionality in querying data than SQL Server in any way at all)?
P.S. I really need to run the select statement as one step rather than splitting it up into parts.
Regards, Trog28
I basically want to select all GRNID's from one table but they have to be between dates in another table.So I want all GRN's between two dates found in the ABSPeriodEndDate table. To find out the start date for the between clause I need to find the MAX Period then minus 1 and the max year. To find the end date of the between clause I want I need to find both the max period and year. But I want the DateStamp column to return the results for the between clause. My query is below:
SELECT tblGRNItem.GRNID
FROM tblGRNItem
INNER JOIN ABSPeriodEndDates ON tblGRNItem.DateCreated = ABSPeriodEndDates.DateStamp
WHERE tblGRNItem.DateCreated BETWEEN
(SELECT ABSPeriodEndDates.DateStamp FROM ABSPeriodEndDates WHERE ABSPeriodEndDates.DateStamp = (SELECT
[code]....
I am trying to insert a carriage return in the select statement after the web link where I had highlighted code in bold. When I insert a record into the table, I receive the email with the message body is in single line.I need the result to look like this in the message body:
ALTER TRIGGER [dbo].[SendNotification]
ON [dbo].[TicketsHashtags]
FOR INSERT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[code]....
I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.
Store   Type   Sales
11 Â Â Â Â Â A Â Â Â Â 1000
23 Â Â Â A Â Â Â 1980
23 Â Â Â B Â Â Â 50
5 Â Â Â Â B Â Â Â 560
I want to filter the store in "where clause" Â where
1)- if the store has type A and  B, then assign only A
2)- if the store has  type A associated with it then assign A
3)- if the store has type B associated with it, then assign B.
Select Store, sum(sales), Type
from table1
where (TYPE]= Â (case when [TYPE] in ('A','B') then 'A'
when [TYPE]='A' then 'A' else 'B'end))
GROUP BY [store], [TYPE]
The above statement is not working for when store has only Type B associated with it.
The select statement:
SELECT DATEDIFF(n , LAG(CAST(Date AS DATETIME) + CAST(Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ),
      CAST(Date AS DATETIME) + CAST(Time AS DATETIME))
   FROM [DataGapTest]
Gives the right output:
NULL
1
1
3548
0
However, when I put the statement in a function, I get only zeros as the output. It's as if the lag and current value are always the same (but they are not of course).
CREATE FUNCTION dbo.GetTimeInterval(@DATE date, @TIME time)
RETURNS INT
AS
 BEGIN
 DECLARE @timeInterval INT
  SELECT @timeInterval = DATEDIFF(n , LAG(CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ),
      CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME))
   FROM dbo.[DataGapTest]
  RETURN @timeInterval
 END
I can't seem to place the "option (recompile)" in any valid position so that the following procedure executes without a syntax error .
USE [PO]
GO
/****** Object: StoredProcedure [dbo].[npSSUserLoad] Script Date: 4/18/2015 3:57:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ...
-- Generated code - DO NOT MODIFY
-- From Object Schema: 'C:XXXXXX.NetPOPOModel\_ObjectSchema
-- To regenerate this procedure use the 'Open With' option on file _ObjectSchema and select POCodeGen.exe
Declare @SqlCmd nvarchar(max)
Declare @ParamDefinitions nvarchar(1024)
Set @ParamDefinitions = N'@UserId int,NTUser varchar(30), @XmlResult XML OUTPUT'
Set @SqlCmd = N'Set @XmlResult =
(
Select
[UserId] [a],
[UserName] [b],
[code]....
I tend to learn from example and am used to powershell. If for instance in powershell I wanted to get-something and store it in a variable I could, then use it again in the same code. In this example of a table order items where there are order_num, quantity and item_prices how could I declare ordertotal as a variable then instead of repeating it again at "having sum", instead use the variable in its place?
Any example of such a use of a variable that still lets me select the order_num, ordertotal and group them etc? I hope to simply replace in the "having section" the agg function with "ordertotal" which bombs out.
select order_num, sum(quantity*item_price) as ordertotal
from orderitems
group by order_num
having sum(quantity*item_price) >=50
order by ordertotal;
My current proc updates(updates using joins of two or three tables) millions of records as per the condition provided for each department.
However, when the proc fails it writes to a ErrorTable, ERROR_MESSAGE(), ERROR_SEVERITY() and which department has failed.
Since the records are updated keeping the selected departments in loop, I get the department in a temp variable.Now, I was asked to log the specific record where the failure was occured.Something like log the identity column value or primary key value which record has failed.
Below. I have also pasted the current result of this query and the desired result.Â
Query can be updated to get the desired result as given below?
Query:
Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT
From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f
where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT
5501 07/13/2015 CO 11 23.87
5501 07/13/2015 PR 12 3.76
5501 07/13/2015 OT 32 33.45
2032 07/14/2015 CO 12 23.87
2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
OTH_PAYER_ID PAID_DATE GROUP_CODE_1 REASON_CODE_1 ADJUSTMENT_AMOUNT_1 GROUP_CODE_2
REASON_CODE_2 ADJUSTMENT_AMOUNT_2 GROUP_CODE_3 REASON_CODE_3 ADJUSTMENT_AMOUNT_3
5501 07/13/2015 CO 11 23.87 PR 12 3.76 OT 32 33.45 2032 07/14/2015 CO 12 23.87 OT 14 43.01
Using DB2.
I have a table called names (firstname, lastname, number) then i have a DECLARED variable called @displaynum...If @displaynum id true  my select query should select the number column. if the variable is false , only the first two columns are selected.
e.g  @displaynum = true                                         Â
@displaynum = false
Firstname | Lastname | number                              Firstname | Lastnam
blah          |  blah       |  12345                            Â
blah          | blah
i am not sure if this is possible as a case still selects the column but just changes the values.
Is there any way to select columns by ordinal position rather than by name?
Something like
Select t.[1] as col1, t.[2] as col2
FROM table t
The question comes because of a very specific situation where I've got 2 databases that have exactly the same schema at a column/datatype level but the column names are different.  There are a few other ways to skin the cat but I'm interested if it can be done this way - without a join to syscolumns.
I have a table with number and varchar columns. The last insert statement has 1 inserted.
The  select statement should retrieve   Â
a         b                                                         Â
1Â Â Â Â Â Â Â Â Â 1
CREATE TABLE [dbo].[test1](
 [a] [int] NULL,
 [b] [varchar](10) NULL
) ON [PRIMARY]
 insert into test1 values (1,'a')
 insert into test1 values (2,'b')
 insert into test1 values (4,'d')
 insert into test1 values (12,'x')
 insert into test1 values (15,NULL)
 insert into test1 values (1,1)
Below is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
Hi, i have a doubt, can a column have the value of a select? I mean, i'm making a photo gallery and on the categories table i need to know how many photos i have, so i need to count in the table photos the ones associated with the id of the category, the problem is that i'm listing categories with a datalist, is there a way so that a column on the categories table have the result of the count? Thanks in advance, if you don't understood my question feel free to ask me again and i'll try to explain it better, i really need this.
View 1 Replies View RelatedI have the following two tables...
tblServer
-serverID
-serverName
-serverLocation
tblSite
-siteID
-serverID
-siteName
-siteIpAddress
I need to write a select query that gets the values of all columns but only returns unique sites because some sites are load balanced across several servers and where this is the case I don't want the site to appear multiple times in the list.