I need my dates to be in mmddyyyy format, if I use the below syntax it shows the dates in yyyymmdd format, what should I do differently?
Declare @D1 Date, @D2 Date
Set @D1 = '11/01/2015'
Set @D2 = '11/14/2015'
Print @D1
Print @D2
And the output this produces is:
2015-11-01
2015-11-14
Hello All,I can't seem to find an answer to this anywhere else: I need toconvert a datestamp to the following format: MMDDYYYY. I've foundsolutions to convert it to many different kids of formats, but not onethat allows me to enter the positions of the month, day and year.Anyone have any ideas?Thanks,Mike
View 1 Replies View RelatedHoe to convert date format
My table contains date as " 13FEB2015:08:54:45 " need to be change in datetime or date.
I have a table that has a DATE field named. AccountingDate that is in the format YYYY-MM-DD. It's not a VARCHAR field. I simply want to convert this date field into the format MM/DD/YYYY and call it New_Accounting_Date.
I've played with various combinations of CAST & CONVERT but haven't been able to get it to work.
Below is my latest effort which returns the error:
Incorrect syntax near the keyword 'as'
What code would work to return a MM/DD/YYYY value for New_Accounting_Date?
Select GLBATCH.AccountingDate,
convert(GLBATCH.AccountingDate as date),101) AS New_Accounting_Date
from GLBATCH
I have a data in table like COLA = '200909' and COLB ='092009'
how to convert it to YYYY-MM format
COLA = 2009-Sept
COLB =Sept-2009
Is it possible to check if the date has been formatted as dd/mm/yyyy i.e. something like this...
if (@EnterDate <> dd/mm/yyyyy )
SET @message = 'date not in the correct format'
I am facing an issue
1:- From Source system ,I am getting dates like ---
2014-Q3
2014-Q2
2014-09
As per my requirement, I need to convert this time to dates like
1:- 2014-Q3 --- last day of quarter 3 of 2014 .
2: 2014 -02 -- last day of feb 2014
Converting such format to the dates I expect...
I've come accross this code and need to alter it to display a normal General Date format.
CASE WHEN p.BIRTHDTTM IS NULL THEN ''
ELSE RIGHT('0' + LTRIM(CONVERT(VARCHAR(20), BIRTHDTTM, 113)) , 20)
END AS BIRTHDTTM
The original data (which is a DOB field) looks like this
1936-08-14 00:00:00.000
And the code above is turning it into this which is good but means I cannot then format in SSRS
14 Aug 1936 00:00:00
So ideally I'd like the code above to be altered so that it gives me
14/08/1936
I have to varchar columns that contain date and time columns.
Date Time
22-06-2015 12:28:29
My output that I want:
Date
2015-06-22 12:28:29
Is there a function that I can convert the date format like I want.
what would be the TSQL in trying to create a new table with date-time format ending via a select into like:
select
*
into tblResults_
+
SELECT
CONVERT(VARCHAR(10),GETDATE(),112)
+
'_'
+
REPLACE(CONVERT(VARCHAR(10),GETDATE(),108),':','_')
from qryResult
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies View Related
Hi
I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.
The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.
I get the following error:
Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale
I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access
Is there a setting in the database that takes care of it?
Thanks
Hi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
I have a table which stores date-of-birth in varchar 19861231(yyyymmdd). A view takes this data. I want to store this date as mmddyyyy in the view. How can we achieve this?
View 18 Replies View RelatedWe are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
I am working on a SSIS Package and I have to do a data transformation but this one is a but tricky. For example
7/6/2015 is my date and when I apply
SUBSTRING(ColumnName,5,4) + "-" + SUBSTRING(ColumnName,3,1) + "-" + SUBSTRING(ColumnName, 1,1)
I get 2015-6-7 which is good
But then when the date is like 10/12/2015 I would have to modify my code
My question is, Is their anything I can add to the code to make the single digits have a zero before them so I can use the same code throughout. My updated code would then be
SUBSTRING(ColumnName,7,4) + "-" + SUBSTRING(ColumnName,4,2) + "-" + SUBSTRING(ColumnName, 2,1)
Hi,I have a problem with updating a datetime column,When I try to change the Column from VB I get "Incorrect syntax near'942'" returned from [Microsoft][ODBC SQL Server Driver][SQL Server]'942' is the unique key column valueHowever if I update any other column the syntax is fineThe same blanket update query makes the changes no matter what isupdatedThe problem only happens when I set a unique key on the date field inquestionKey is a composite of an ID, and 2 date fieldsIf I allow duplicates in the index it all works perfectlyI am trying to trap 'Duplicate value in index' (which is working onother non-date columns in other tables)This is driving me nutsAny help would be appreciated
View 5 Replies View RelatedUsing DTS package in 2000 version, I am dumping TXT file contents into SQL Table,
I have one column having date in format YYYYMMDD(20070929) and corresponding column in SQL is datetime, but it fails on data type mismatch.
I have no choice of making date column in SQL to string or Varchar etc,
is there any way to make that date column in SQL to convert the value upon transformation from format (YYYYMMDD) to M/DD/YYYY (9/29/2007).
many many thanks,
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp 12:00 AM? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp wont appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
i have a excel file in which i have a date column it having the below date formats below
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
dear all can anybody help me soon....
i am using visual studio 2005 webapplication based on sql server 2005 database.
i can get one date from sql using one query.
I am selecting my field based on following code CONVERT(varchar, Oman.Positions.Datum, 9) AS LastUpdate
this case my output is May 4 2008 3:19:45:000AM.....
this output is correct but from this output i want to avoid millisecond part.
ie i want the output like May 4 2008 3:19:45 AM....
how i can do this
regards
I need to do the following and am hoping someone can help me out.
I have C#(asp.net app) that will call a stored procedure. The C# will pass in a date to thestored procedure. The date is in the format YY/MM/DD. Once inside of the stored procedure, the datepassed into the stored proc needs to be compared to todays date. Todays date must be determined inthe SQL.
So basically here is my pseudo code for what I am trying to accomplish. Basically I just am afterthe comparison of the two values:
If @BeginDate < TodaysDate
The difficult part is how to obtain the value for "TodaysDate"
Taking into consideration that "TodaysDate" should probably be in the format of YY/MM/DD considering that is how the date it is to be compared with is being passed in.
Can someone please code this out for me in Microsoft SQL. I would be forever grateful.
Hi,
I Have this simple convertion in a Script component
Dts.Variables("dateOfProcess").Value = CDate(lineMCF.Substring(30, 2) + "/" + lineMCF.Substring(28, 2) + "/" + lineMCF.Substring(24, 4))
this works fin in my development environment which has a spanish version of SQL Server and uses "DD/MM/YYYY" as date format.
but the production environment has an english version of SQL Server and "MM/DD/YYYY" date format, so the package crashes in this server.
How do I convert the string to date not depending on the SQL server language.
thanks.
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
So I have to build dynamic T-SQL because of a date parameter that will be provided. The Date Parameter will be provided in SSRS in normal MM/DD/CCYY format. So how do I then convert that date to my Oracle format
NUMERIC(8,0) CCYYMMDD?
I tried this...
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF<='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF>='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
but that put it in the format of...
AND
MEMBER_SPAN.YMDEFF<=''2015-04-01''
AND
MEMBER_SPAN.YMDEFF>=''2015-04-01''
Which is close...I think I just need to lose the "-"
SELECT * ,[Due]
FROM [Events]
Where Due >= getdate() +90
This returns the error: Conversion failed when converting date and/or time from character string
Why would this be? How to cast or convert this so that it will work?
CREATE TABLE #Dateissue
(ID int,
Code nvarchar (20),
Datein datetime,
Declined datetime )
[Code] .....
I have a table here. I want find a way of getting the latest date, when the code is the same. If the Declined date is null. Then I still want the latest date. E.g. ID 3.
If the declined date is filled in. Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but i got an error message when trying this out. Against the code
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. What do I need to do to get both my outputs working?
i have written a sql function which returns only number of working days (excludes holidays and Weekends) between given StartDate and EndDate.
USE [XXX]
GO
/****** Object: UserDefinedFunction [dbo].[CalculateNumberOFWorkDays] Script Date: 10/28/2015 10:20:25 AM ******/
SET ANSI_NULLS ON
GO
[code]...
I need a function or stored procedure which will return the date which is 15 working days (should exclude holidays and Weekends) prior to the given future Date? the future date should be passed as a parameter to this function or stored procedure to return the date. Example scenario: If i give date as 12/01/2015, my function or stored procedure should return the date which is 15 working days (should exclude holidays and Weekends) prior to the given date i.e 12/01/2015...In my application i have a table tblMasHolidayList where all the 2015 year holidays dates and info are stored.
So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?