Transact SQL :: Display Different Table Having Same Column With Different Data
Sep 25, 2015
I am having two table i.e( tbl_oldEmployee , tbl_NewEmployee ),which is having Column name Employee Name and City same in both table but inside column data is different in different table.but i want to view the Employee name and City from tbl_NewEmployee to tbl_oldEmployee which is having EmployeeId common with tbl_oldEmployee extra record also required (i.e tbl_NewEmployee having 6 record and tbl_oldEmployee having 10 record,so i need to display data from tbl_oldEmployee but first 6 record which id match with tbl_NewEmployee id should be replaced and extra data from tbl_oldEmployee also display).
View 3 Replies
ADVERTISEMENT
Oct 4, 2015
I am studying indexes and keys. I have a table that has a fixed width of data to be loaded in the first column which is parsed in a view based on data types within the fixed width specifications.
Example column A:
(name phone house cost of house,zipcodecountystatecountry)
-a view will later split this large varchar string based
column b: is the source filename of the data load (varchar 256)
....
a. would there be a benefit of adding a clustered or nonclustered index (if so which/point in direction on why)
b. is there benefit of making one of these two columns a primary key (millions of records) or for adding a 3rd new column as a pk?
c. view: this parses the data in column a so it ends up looking more like "name phone house cost of house zipcode county state country" each having their own column.
-any pros/cons of adding indexes (if so which) to the view instead of the tables or both for once the data is parsed?
View 4 Replies
View Related
Oct 22, 2015
I have a simple table data i want want to show row data in to column data.
SELECT clblcode,mlblmsg
FROM warninglabels
My expected result will be
0001 0002 0003 0004
------- ------- -------- --------
May Cause.... Important..... Take madi........... Do Not Take.......
View 16 Replies
View Related
May 29, 2015
I have table with about 10000 rows, there is a column named Raw_XMLData is defined as varchar but data is xml format.
I try to insert into another table, if Raw_XMLData column has is valid xml data?
Is it possible to do in T sql?
View 2 Replies
View Related
May 29, 2015
I have a SQL text column from SP_who2 in table #SqlStatement:
like 1row shown below :
"update Panel set PanelValue=7286 where PanelFirmwareID=4 and PanelSettingID=9004000"
I want to find what table and column names are in the text ..
I tried like below ..
Select B.Statement from #sp_who2 A
LEFT JOIN #SqlStatement B ON A.spid = B.spid
where B.Statement IN (
SELECT T.name, C.name FROM sys.tables T
JOIN sys.columns C
ON T.object_id=C.object_id
WHERE T.type='U'
)
Something like this : find the column names and tables name
View 18 Replies
View Related
Nov 10, 2015
I have a Cost table with the following field:
Year, Quarter, Cost1, Cost2
I would like to write a SQL so that it will give me something like that, so that I will have 2 years across the top with the same same columns.
2016
2015
Quarter
Cost1
Cost2
Cost1
Cost2
1
100
200
[code]....
View 3 Replies
View Related
Aug 5, 2015
I have a table like dependent eg.
Dependent
emp id Dept ID Child Name
1 11 C1
1 12 C2
1 13 C3
1 14 C4
1 15 C5
These is input table and i want output like
Child1 Child2 Child3
C1 C2 C3
C4 C5 null
View 8 Replies
View Related
Jun 25, 2015
I would like to display child row right after parent row with ORDER BY DataDate for below set of data.
DECLARE @DATA TABLE (DataUID INT PRIMARY KEY IDENTITY(1,1), DataId INT, DataName NVARCHAR(20), DataDate DATE, ParentDataName NVARCHAR(20))
INSERT INTO @DATA (DataId, DataName, DataDate, ParentDataName)
VALUES (1, 'child plan 1', '2015-06-09', 'Plan'), (1, 'child plan 2', '2015-06-08', 'Plan'),
(1, 'Design', '2015-06-01', NULL), (1, 'Implement', '2015-06-01', NULL),
(1, 'child Implement 1', '2015-06-09', 'Implement'), (1, 'child Implement 2', '2015-06-10', 'Implement'),
(1, 'Plan', '2015-06-01', NULL), (1, 'Operate', '2015-06-01', NULL)
select * from @DATA
1. as a example the child row 'child implement 1' & 'child implement 1' show correctly under parent 'Implement' with Order BY DataDate.
2. I'm looking for a SELECT query which should display 'child plan 1' & 'child plan 2' under parent 'Plan' with Order BY DataDate clause.
Below is the expected output I'm looking for,
View 6 Replies
View Related
Jun 30, 2015
I have a temp table with the following columns and data
drop table #temp
create table #temp (id int,DLR_ID int,KPI_ID int,Brnd_ID int)
insert into #temp values (1,2343,34,2)
insert into #temp values (2,2343,34,2)
insert into #temp values (3,2343,34,2)
[Code]....
I use the rank function on that table and get the following results
select rank() over (order by DLR_ID,KPI_ID,BRND_ID ) Rown,* from #temp
I am interested only in Rown and Id columns. For each Rown number, I need to get the min(ID) in the second column and the duplicate ID should be in 3rd column as shown below.If i have 3 duplicate IDs , I should have 3 rows with 2nd column being the min(id) and 3rd column having one of the duplicate ids in ascending order(as shown in Rown=6)
View 7 Replies
View Related
Sep 9, 2015
i want to show data Party Name and Time interval wise. here is my table from where i will fetch data. so pasting table data here.
Call start Call duration Ring duration Direction Is_Internal Continuation Party1Name Park_Time
------------------------- ---------------- ------------- --------- ----------- ------------ --------------- -----------
2015/06/08 08:06:08 00:02:28 2 I 0 0 Emily 0
2015/06/08 08:16:38 00:00:21 0 I 0 1 Line 2.0 0
2015/06/08 08:16:38 00:04:13 5 I 0 0 Jen 0
[code]...
now i am not being able to cross join this CTE with my table to get data party name wise and time interval wise. say for if no data exist for a specific time interval then it will show 0 but each party name should repeat for time interval 9:00:00 - 9:30:00 upto 17:30:00. i like to add what filter need to apply to get data for incoming, outgoing, call transfer and miss call.
For Incoming data calculation
where direction='I' and
Is_Internal=0 and continuation=0 and
RIGHT(convert(varchar,[call duration]),8)<> '00:00:00'
For outgoing data calculation
[code]...
View 3 Replies
View Related
Jul 31, 2007
Hi all,
I have created a trigger in SQLExpress which looking for any insertion to a specific table in a database:
Create Trigger Tg_Insert on [tablename]
FOR Insert
AS
Select * FROM Inserted
---------------------------------------------------------
Assume there is nothing wrong with this trigger as I have already checked the output with Query tool.
My question is how can I display the newly inserted data to the client? In my case, Console application.
I want to do something like Console.WriteLine("data from inserted table here");
How can I achieve this? FYI, I'm using VS2005 with sqlexpress 2005.
Thanks in advance.
Regards,
SHAH
View 11 Replies
View Related
Aug 16, 2007
How to display 2 columns of Data in 1 column?
If I use like this
Select Names, 'myData' from emp
The output is:
Name1 myData
Name2 myData
Name3 myData
But, I need to display like this
Name1
myData
Name2
myData
Name3
myData
please advise
View 5 Replies
View Related
Mar 10, 2008
Hi,please help me, i have a data driven site,i need to display a table who look like this Name Total Used RemainingA 10 5 5B 20 13 7C 12 12 if you would look on the field of total, used and remaining, they look like an excel formula which is total - used = remaining or vise versa.but the problem in this table is the database, it look like thisname On/OffA 1A 1A 0and soon....... B 1B 0B 1and soon.... until C so how do i count the total, is the number of A's or B's or C's in the whole database then Group By the 'name' fieldthen how do i count the used is the number of ON in the On/Off field while remaining is counting the Off,so my question is i have RUN this using 3 different gridview each has its own datasource, that look like this for the used select name, count(on/off)
from myTable
where on/off = 1
group by name for the remaining select name, count(on/off)
from myTable
where on/off = 0
group by name and for the total, just used the same Select but without the where clause,i get this problem when the field "used" (please refer from the 1st table) it has a blank value, which is because my data base show that in deed name "C" has not been used, but eve though it should show '0' instead of a blank, so how can i do that???please help me, thanks
View 6 Replies
View Related
Oct 14, 2015
I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
View 4 Replies
View Related
Dec 1, 2011
I want to display the following output where integer value is column data.
{[Advertiser].[AdvertiserKey].&[4000],
[Advertiser].[AdvertiserKey].&[4001],
[Advertiser].[AdvertiserKey].&[4002],
[Advertiser].[AdvertiserKey].&[4003],
[Advertiser].[AdvertiserKey].&[3661],
[Advertiser].[AdvertiserKey].&[3662]
}
View 4 Replies
View Related
Apr 14, 2014
I have data like this
TableA
ID JunkData
1 1234jdueakj34jfjj4
2 345j5uttuvj5575jkf
3 sjhsdfk283ncfkjsf9
I need the Result to display like this. Split the JunkData Column Data in multiple lines, each line should contain 5 characters.
ID JunkData
1 1234d
ueakj
34jfj
j4
2 345j5
uttuv
j5575
jkf
View 2 Replies
View Related
Sep 18, 2015
I have a table with a column AttributeNumber and a column AttributeValue. The data is like this:
OrderNo. AttributeNumber AttributeValue
1.-Order_1 2001 A
2.-Order_1 2002 B
3.-Order_1 2003 C
4.-Order_2 2001 A
5.-Order_2 2002 B
6.-Order_2 2003 C
So the logic is as follows:
I need to display in my query the values are coming from Order_1, means AttributreValues coming from AttibuteNumbers: 2001,2002,2003...and Order_2 the same thing.
Not sure how to create my Select here since the values are in the same table
View 2 Replies
View Related
Jan 29, 2014
I want to display data in block. Below is the Create,Insert Script and format of desired output.
CREATE TABLE [dbo].[Test_AA](
[CounterpartID] [varchar](2000) NULL,
[CounterpartName] [varchar](2000) NULL,
[SATName] [varchar](2000) NULL,
[NameOfBO] [varchar](2000) NULL,
[Code] ....
Result Should be like This :
ID:17388
Name:Scottie Berwick
SATName:Scottie Berwick
NameOfBO:
SATAccountNumber:
[Code] ....
View 4 Replies
View Related
Jul 16, 2015
Is there a way we can get Table and Column name in separate column using PIVOT or something?Right now what i have is:
Text QueryPlan Plan_handle
Name Value
select id,name,Address from person <showPlznXML... 010101 Table Person
select id,name,Address from person <showPlznXML... 010101 column id
select id,name,Address from person <showPlznXML... 010101 Table Person
[code]....
View 26 Replies
View Related
Jul 22, 2014
I have a view created from only one table.
VW_Stats ( Tab_Name,Load_Status,User,....)
Tab_Name & Load_Status columns provides the information about Name of table and status of data getting loaded to this table.
To this I would like to add a column to display the running count in the table, I mean how many records so far loaded, as below the recordCount coming from the same table tbl_collection
Table_name Load_Status RecordCount User...
tbl_collection Running 1244 XYZ
View 7 Replies
View Related
Oct 10, 2007
I have nine type of buttons,
EnrollAmtBTM
PlacAmtBTM and so on, I also have a SQL setver view V_Payment_Amount_List from here i need to display the data on the button
this is the select value to display when i choose the agency list and the amount corresponding to that agency_ID is displayed here the agency_ID is fetched from the SQL CONDITION
THIS IS WHERE I GET FETCH AGENCY DATA WHEN SELECTED i.e SQL CONDITIONprotected void CollectAgencyInformation()
{
WebLibraryClass ConnectionFinanceDB;ConnectionFinanceDB = new WebLibraryClass();
string SQLCONDITION = "";string RUN_SQLCONDITION = "";
SessionValues ValueSelected = null;int CollectionCount = 0;if (Session[Session_UserSPersonalData] == null)
{ValueSelected = new SessionValues();
Session.Add(Session_UserSPersonalData, ValueSelected);
}
else
{
ValueSelected = (SessionValues)(Session[Session_UserSPersonalData]);
}ProcPaymBTM.Visible = false;PaymenLstBTN.Visible = false;
Dataviewlisting.ActiveViewIndex = 0;TreeNode SelectedNode = new TreeNode();
SelectedNode = AgencyTree.SelectedNode;
SelectedAgency = SelectedNode.Value.ToString();
Agencytxt.Text = SelectedAgency;
Agencytxt2.Text = SelectedAgency;
Agencytxt3.Text = SelectedAgency;DbDataReader CollectingDataSelected = null;
try
{CollectingDataSelected = ConnectionFinanceDB.CollectedFinaceData("SELECT DISTINCT AGENCY_ID FROM dbo.AIMS_AGENCY where Program = '" + SelectedAgency + "'");
}
catch
{
}DataTable TableSet = new DataTable();
TableSet.Load(CollectingDataSelected, LoadOption.OverwriteChanges);int IndexingValues = 0;foreach (DataRow DataCollectedRow in TableSet.Rows)
{if (IndexingValues == 0)
{SQLCONDITION = "where (Project_ID = '" + DataCollectedRow["AGENCY_ID"].ToString().Trim() + "'";
}
else
{SQLCONDITION = SQLCONDITION + " OR Project_ID = '" + DataCollectedRow["AGENCY_ID"].ToString().Trim() + "'";
}
IndexingValues += 1;
}SQLCONDITION = SQLCONDITION + ")";
ConnectionFinanceDB.DisconnectToDatabase();if (Dataviewlisting.ActiveViewIndex == 0)
{
Dataviewlisting.ActiveViewIndex += 1;
}
else
{
Dataviewlisting.ActiveViewIndex = 0;
}
SelectedAgency = SQLCONDITION;
ValueSelected.CONDITION = SelectedAgency;
???? this is where i use to get count where in other buttons and are displayed.... but i changed the query to display only the Payment_Amount_Budgeted respective to the agency selected. from the viewRUN_SQLCONDITION = "SELECT Payment_Amount_Budgeted FROM dbo.V_Payment_Amount_List " + SQLCONDITION;
try
{
CollectionCount = ConnectionFinanceDB.CollectedFinaceDataCount(RUN_SQLCONDITION);
EnrollAmtBTM.Text = CollectionCount.ToString();
}
catch
{
}////this is my CollectedFinaceDataCount-- where fuction counts the records in the above select statement if i use for eg.
"SELECT Count(Placement_Retention_ID) FROM dbo.V_Retention_6_Month_Finance_Payment_List"
here is the functionpublic int CollectedFinaceDataCount(String SQLStatement)
{int DataCollection;
DataCollection = 0;
try
{
SQLCommandExe = FinanceConnection.CreateCommand();
SQLCommandExe.CommandType = CommandType.Text;
SQLCommandExe.CommandText = SQLStatement;
ConnectToDatabase();DataCollection = (int) SQLCommandExe.ExecuteScalar();
DisconnectToDatabase();
}catch (Exception ex)
{Console.WriteLine("Exception Occurred :{0},{1}",
ex.Message, ex.StackTrace.ToString());
}
return DataCollection;
}
So here mu requirement request is to display only the value fronm the view i have against the agency selected
Please help ASAP
Thanks
Santosh
View 8 Replies
View Related
Feb 28, 2008
Hello,I have a (big) table which is not normalized, but for i need at themoment i thinkthat's no problem. Indeed, what i would like to do is to select thename field andthe note. The problem is that i want to display the note in 2different columns.the first columns will show the number (count) of time that a certainnote (e.g note=4)appears for a certain name and in the other column the same thing butfor a different note value.so each column noteX will display the number of time that the notewith the value X appears for each namefor example, to the following table:Name | note | job | city | id |----------------------------------------john | 4 | jb1 | hamb | 1 |john | 5 | jb2 | hamb | 2 |john | 5 | jb3 | hamb | 3 |john | 5 | jb4 | hamb | 4 |Mark | 4 | jb1 | mun | 5 |Mark | 4 | jb2 | mun | 6 |Mark | 4 | jb5 | mun | 7 |Mark | 5 | jb1 | mun | 8 |peter | 5 | jb3 | berl | 9 |peter | 5 | jb5 | berl | 10 |frank | 4 | jb6 | v.form | 11 |frank | 5 | jb3 | v.form | 12 |frank | 5 | jb2 | v.form | 13 |the result should be:Name | note5 | note4 |-------------------------john | 3 | 1 |Mark | 1 | 3 |peter | 2 | 0 |frank | 2 | 1 |How should be the right SQL command to show the data i want?Rui DiasJoin Bytes!Thanks a lot
View 5 Replies
View Related
Aug 28, 2015
I am new to ssrs super scripts. I want to display superscript as B with bold & red colour for one column data
o/p:
Name:
America B
India B
UAE B
Here B is super script & red color....
View 2 Replies
View Related
Nov 20, 2013
I have created a table as below mentioned. Then I want to alter the ID column as identity(1,1) without dropping the table as well as losing the data.
create table dbo.IdentityTest
(
id int not null,
descript varchar(255) null,
T_date datetime not null
)
View 7 Replies
View Related
Nov 18, 2015
I have a column with the data as below :-
<Items>
<Item Value="Value1" />
<Item Value="Value2" />
<Items>
How to get this data into seperate columns as
Items
value1
value2
View 2 Replies
View Related
Jun 29, 2015
I need to delete records from a table (Table1) which has a foreign key column in a related table (Table2).
Table1 columns are: table1Id; Name. Table2 columns include Table2.table1Id which is the foreign key to Table1.
What is the syntax to delete records from Table1 using Table1.Name='some name' and remove any records in Table2 that have Table2.table1Id equal to Table1.table1Id?
View 11 Replies
View Related
Feb 22, 2006
I have added a Slowly Changing Dimension transformation to an SSIS package and have launched the Wizard to edit it. After selecting the source (a SQL Server 2005 instance), if I select a very large table (9+ million rows), I'm encountering two strange behaviors:
1. The wizard hangs for several minutes before displaying the columns from that table.
2. The wizard does not display the primary key column. This, of course, is the column I want to designate as the "business key", but can't because it's not displayed.
I know this is more like a fact table than a dimension, but this is not a data warehouse. This is just a very large table, and I need to update a field in certain records based on the contents of a source text file. Is there another transformation I should use to perform updates?
View 2 Replies
View Related
Apr 4, 2007
Hi,
I have a result set from a store procedure which looks like this.
Column1 Column2 Column3
A 1 lit1
A 1 Rep2
A 1 Reg3
B 2 ram1
B 2 lim2
I want to show data in my table like this:
Column1 Column2 Column3
A 1 lit1; Rep2;Reg3
B 2 ram1;lim2
Can anyone tell me how I can do this?
Thanks
Ashwini
View 1 Replies
View Related
Jan 6, 2008
I have a fairly complicated report consisting of numerous datasets and numerous tables.
In one of my tables I want to display the message "No data to display" if nothing comes back from the query. Currrently the table just disappears if there is no data. Is there a way to display the table if there is nothing in the query?
View 4 Replies
View Related
Sep 2, 2015
I have two tables, one is called (questions), the second one (answers).
questions columns are (ID,questionTitle)
answers columns are (ID,questionID,answer, answerDate)
I use this query to load data: "SELECT q.questionTitle,COUNT (a.ID),a.answerDate FROM questions q LEFT JOIN answers a ON q.ID=a.questionID" the query is easy, but my problem which I can't solve is how can I fetch the data ordered by the column answerDate, I mean I want the first record to be the one which has the most recent answer and so on.
View 12 Replies
View Related
Jul 6, 2015
I am trying to find the Table and column names from the below.
Is there a way i can get table name and column name from query_plan column?
SELECT TOP 100 text, query_plan,cp.plan_handle
FROM sys.dm_exec_cached_plans cp
CROSS APPLY sys.dm_exec_sql_text(cp.plan_handle)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle)
WHERE objtype='Adhoc'
View 5 Replies
View Related
Jul 21, 2015
SELECT TOP 100 text, query_plan, cp.plan_handle, qs.last_execution_time
FROM sys.dm_exec_cached_plans cp
CROSS APPLY sys.dm_exec_sql_text(cp.plan_handle)
CROSS APPLY sys.dm_exec_query_plan(cp.plan_handle)
JOIN sys.dm_exec_query_stats qs ON cp.plan_handle = qs.plan_handle
WHERE objtype='Adhoc'
I have below output:
Text Query_plan Plan_handle Lst_execution_time
Select id,name from person
<Showplan... dshkkgdaHqrqe13232423 2015-07-21 10:50:22.713
Update customer set Cid=3 where name='abc'
<Showplan... poasfvrqe13232423 2015-07-21 10:16:22.500
delete from orders where ORid=8
<Showplan... 2ase2423 2015-07-21 10:10:22.710
Select 1,2,3,4,5 from num
<showplan afqfqfq 2015-07-21 10:10:22.710
I am looking for
Text Query_plan Plan_handle Last_execution_time TabName colname
Select id,name from person <Showplan... dshkkgdaHqrqe13232423 2015-07-21 10:50:22.713
Person Id, name Update customer set Cid=3 where name='abc'
<Showplan poasfvrqe13232423 2015-07-21 10:16:22.500 customer Cid, name
delete from orders where ORid=8 <Showplan... 2ase2423 2015-07-21 06:10:22.710 Orders ORid
Select 1,2,3,4,5 from num <showplan afqfqfq 2015-07-21 10:10:22.710 nUM 1,2,3,4,5
View 2 Replies
View Related
May 19, 2015
I found string from net how to split column data to row
SELECT A.JbIDFull, A.ProdID, A.OrderQty, A.OtherDetails, A.OrderDate, c.Item FROM
(SELECT JbIDFull, DeptID, ProdID, OrderQty, OtherDetails, OrderDate, LamORSteachType, JBID, RMIDs, RMQty
FROM tblJobCardforProduction WHERE JBID = '2' AND DeptID = '3') A
CROSS APPLY dbo.SplitStringNEW(a.RMIDs,';') b
CROSS APPLY dbo.SplitStringNEW(a.RMQty,'/') c
When I apply one cross apply it's working fine but when i apply for one more column is replacing three time one row, this data i want to split RMIDs and RMQty with same JbIDFull
JbIDFull DeptID ProdID OrderQty RMIDs RMQty
PD-May15-00001 3 2044 10000 PROD-00052 0
PD-May15-00002 3 921 1000 PROD-00052;PROD-00383;PROD-00384 500;600;700
View 2 Replies
View Related
