Transact SQL :: Email Notifications - Count For Name And Logins
Nov 6, 2015
I have a stored procedure which will send an email notification everyday the count of names and count of logins at night. And this sends like a link so the users can directly click on the link(s) and see who all logged in. This works perfectly fine.
Now my requirement is that if there is no count for either name or logins it should send just as text and not as link.
Select count (name) from dbo.test=0 just plain 'text total count of names 0'
Select count (logins) from dbo.test1=0 just plain text 'total count of logins 0'
I have a query which sends email notification of count of pending name and suggested name.. on a daily basis. So this works fine but now I want like if the pending and suggested are ' o count' I don't want the email notification. It should not send an email, if it is o count, but if we have the number for pending and suggested this email should be sent.
Some packages I develop have a lot of steps, and some people like myself can go crazy with email notifications, depending on the graph, I sometimes add notifications (success/fail) at the component level, so I can know what happened to that SSIS package from my blackberry and immediately log into the VPN and fix the issue.
The only problem that I have with that is that sometimes, like right now, I see myself adding 6 "send mail tasks" to SSIS packages, one pass/fail for each component.
Basically, I was wondering if anyone had any ideas or suggestions, ideally I wish I could create one single send mail task that could be reused by other components on the package and just update the message/subject through expression and variables.
In the notifications tab of the job I have e-mail operator selected. Click on the box with the elipses to enter the email addresses. It will let me enter 2 email addresses in the e-mail name field. It looks like the field has a limited length...is there a way to manually enter several addresses?
HI, Does any one know how I could send all the alerts, email notifications from the SQL Server to my Sprint PCS Phone. Is there any software for that. I know that it can be done by MSN mobile. Just checking whether it can be directly sent to my phone rather than going to hotmail which is then forwared to my cell phone. Let me know. Thanks, Cinday
We have (running SQL 2012 Std) and have enabled trace flag 1204 and 1222 for capturing deadlock through extended events. I have enabled deadlock notification through email .But it only send deadlock event occurred notification from the sql server error log . I was wondering if its possible to email the deadlock details they get generated in extended events via DB mail.
I am trying to send out notifications when jobs complete (fail or succeed). I have database mail working fine on my DEV server, but I am having issues with it on my PROD server. I am currently having people look into if McAfee may be blocking it.
I am able to send out a test email from SSMS>Management>Database Mail, but when I set a Notification for a job, the job will complete and in the history, it will say "NOTE: Failed to notify 'User' via email."
I have created an Operator and set up Profiles and Accounts, just as I did on my DEV server.
I need to transfer the logins and passwords from my prod server to my DR server. I've seen a number of articles about how to transfer logins; but, I'm not finding anything on how to transfer both logins and their passwords. SQL server R2008 R2
ok, first, I know... I forgot to run a backup of the master database, and I forgot to run a script to caputure logins. Not that that is out of the way... I need to recreate the logins under the Securities tab below the databases. All the company databases have the user names and passwords assigned to them, but they are not able to login, because they are not able to authenticate to the SQL server first.
Is there a script that someone has that will copy the company database security info for the users and recreate them in the SQL security tab?
I know that I can rebuild them manually, but I need to delete them first in the application software, then delete them from the databases, and then recreate them in the application software... and as simple as that sounds... it is a slow moving process.
How can I turn this query into an Email alert if one of the counts are GT 50. The Source are machines that I capture counts(Unprocessed_Cntr) from every 5 minutes and load to the Load_Time_Capture table. I also add a datetime to each capture(Unprocessed_Capture ).
If any individual source has a count > 50 or if the combined(ALL) GT 50 send an email to support person.
SELECT CASE GROUPING([Source]) WHEN 1 THEN 'ALL' ELSE [Source] END AS 'Input Source', avg([Unprocessed_Cntr]) as 'Average Queue Past 15 Min'
FROM Load_Time_Capture WHERE Unprocessed_Capture >= DateADD(mi, -15, Current_TimeStamp) GROUP BY [source] WITH ROLLUP
I’m running a data integrity procedure from an agent job that is a scheduled weekly maintenance task which emails the results of my query, and is working properly.
I would however like this to only receive the email it the query contains results, and not send it no records are found to prompt me to take action.
Trying to find tsql for TRIGGER which will send me email, if someone rename database in test/dev environment. I found it for CREATE and DROP database trigger but could not find for RENAME database.
I am wanting to fire-off an email with the failed jobs anytime they are deposited into a table. My syntax fires off an email even when the table does not contain data, it just sends a blank email. this will only generate an email if teh table contains data?
if exists (Select from FailedJobs) exec msdb.dbo.sp_send_dbmail @profile_name = 'DatabaseMail' @recipients = 'asdfasdfsdf@aafas.com' @from_address = 'asdfasdfacasca@cc.com' @query = 'Select * from failedjobs' @subject = 'List Of Failed Jobs' @attach_query_result_as_file = 1;
I have a table that gets queued up with a list of people for example email, first name, temporary login account and temporary password.How would i create a store procedure to feed these fields into the html message for each record. For example:
Dear <first name>, Your temporary access is listed below. Login: <temporary login> Password: <temporary password>
I am not sure how you insert the data into the html message. It has to be in html because the message has a couple hyperlinks.
Hello, I receive this error "The SQL Server Service Broker for the current database is not enabled, and as a result query notifications are not supported. Please enable the Service Broker for this database if you wish to use notifications." I attach the database in Management Studio to query and enable the broker using the scrip below but to no avail. ALTER DATABASE DataName SET ENABLE_BROKER ‘''<<------successfulandSELECT is_broker_enabled FROM sys.databases WHERE name = 'Database name' ‘'''<<-------value is 1 Global.asax ... Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs) System.Data.SqlClient.SqlDependency.Start(ConfigurationManager.ConnectionStrings("dataConnectionString1").ConnectionString) End Sub...Web.config ... <connectionStrings> <add name="dataConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|jbp_data.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> <add name="ASPNETDBConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" /> </connectionStrings>... Hope you could help. cheers,imperialx
I have some records (approx 100K - 500K) in my table (Name, DOB, Zip, Phone). I want to validate each record and every field as given below.
Name - Should not have numerics DOB - Should be in yyyy-mm-dd format, should be < 1995 Zip - Should be 5 char zip, allowed 3 or 4 char zip for some States Phone - Should have 10 numeric digits, should be in xxxx-xxxx-xx format.
After validating these rules, If the record is valid then send email saying valid record, if invalid then send email with validation failure details like which column failed which validation rule suppose DOB might not be in specified format or it might be > 2000 all these details.
How to validate all the records in bulk without any loop or cursor.
I am trying to insert a carriage return in the select statement after the web link where I had highlighted code in bold. When I insert a record into the table, I receive the email with the message body is in single line.I need the result to look like this in the message body:
ALTER TRIGGER [dbo].[SendNotification] ON [dbo].[TicketsHashtags] FOR INSERT AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from
I have a query running and returning 3 columns, user name, e-mail and device name
SELECT DISTINCT v_R_User.Full_User_Name0 AS 'User full Name', v_R_User.Mail0 AS 'E-Mail', _RES_COLL_DEV00144.Name FROM v_R_System INNER JOIN v_R_User ON v_R_System.User_Name0 = v_R_User.User_Name0 INNER JOIN _RES_COLL_DEV00144 ON v_R_User.User_Name0 = _RES_COLL_DEV00144.UserName INNER JOIN v_GS_COMPUTER_SYSTEM ON v_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID Where v_R_User.Mail0 <> '' ORDER BY 'User Full Name'
From here I would like to generate an e-mail to each user (like mail merge) to each user in the table an include their machine name. I can do it with PS, but rather have it run directly from SQL. Is it possible?
I have the following query and want the results within my query although I want to be able to get the SUM of my COUNT results. So basically I want the SUM of [Document Count] within my query/
DECLARE @Date date; SET @date = '02/05/2015' SELECT CONVERT(VARCHAR,CONVERT(Date, @Date, 103),101) AS [Date Scanned], (SELECT COUNT(*) FROM QUEUE WHERE date_scanned = @Date) AS [Total Scanned], COUNT(dbc_state) AS [Document Count], CASE WHEN dbc_state = 1 AND ON_HOLD = '1' THEN 'On Hold'
I have to send updated Employee list from employee master table to a particular email ID on every last date of Month and when a new employee is added / deleted / edited. Also need to send this as an Excel file
I tried the following but "Invalid Object name dbo.tbl_EmployeeMaster" error coming while inserting a new employee.
USE [eXact] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER TRIGGER [dbo].[trg_Email]
I want to avoid iterating through a table row by row and programmatically incrementing a counter,/I have define a view called Q2 with the following fields of interest:
Trial varchar(25) BI int Track int CAT int
What I would like to do is partition by Trial, BI, and Track, and count the number of times CAT changes value. In Access, I would just iterate through a recordset inside a function, but I would like to see if there is a set based solution.Adding Sample Data and Output.
I'm working on a data analysis involving a table with a large number of records (close to 2 million). I'm using only three of the columns in the table and basically am grouping results based on different criteria. The three columns are PWSID, Installation and AccountType. I have to Provide the PWSID column with a count of the total number of installations per PWSID, also a count of AccountTypes per PWSID. I have the following query, but the numbers aren't adding up and I'm not sure why. I'm falling short in the total count by around 60k records.
DECLARE @PN_INC INT, @POSITION_DESC VARCHAR(15) SELECT @PN_INC= MAX(PositionNumberInc) FROM dbo.tblPosition WHERE LTRIM(RTRIM(UPPER(PositionDescription)))=LTRIM(RTRIM(UPPER(@POSITION_DESC))); SELECT @PN_INC is returning null when there is no record in the table;
1. how can I make it return 0 when @PN_INC is null else it should pick the MAX(PositionNumberInc) value
2. I have written the below query to return 0 when @PN_INC is null but I need query to select the MAX(PositionNumberInc) value when @PN_INC is not null
SELECT @PN_INC= coalesce(MAX(PositionNumberInc), 0) FROM dbo.tblPosition WHERE LTRIM(RTRIM(UPPER(PositionDescription)))=LTRIM(RTRIM(UPPER(@POSITION_DESC)));
Which means, I want to count for each transaction, the latest entry based on date. And there can be many countries like this. And I need to count both entries for ABC & XYZ.Normal count will give me duplicate entries.
How can I display 0 when using COUNT and GROUP BY?I'm using SELECT CASE in my query. I was trying to use COALESCE but no result, COUNT result = 1. (there should be 0).
COALESCE((COUNT(DISTINCT (CAST((CASE WHEN CurrStat = @Stat AND LogDate = @LogDate THEN Enumber ELSE 0 END) AS int)))), 0) AS InTrack,
