Transact SQL :: Error Converting Data Type Nvarchar To Float
Sep 24, 2015
In the following code I want to compare 2 values: AccessVal and SQLVal. The values are stored as nvarchars, so I'm isolating the numeric values in a subquery. Notice I'm only selecting 1 row. The commented line, where I compare the values, is throwing the error.
SELECT QA_AutoID, AccessVal, SQLVal
,ROUND(ABS(CONVERT(float, AccessVal,1)),0) as AccessFloat
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) as SQLFloat
FROM QA
WHERE QA_AutoID in (
SELECT TOP 1 QA_AutoID
FROM QA
WHERE ISNUMERIC(SQLVal) = 1 AND ISNUMERIC(AccessVal) = 1
)
--AND ROUND(ABS(CONVERT(float, AccessVal,1)),0) <> ROUND(ABS(CONVERT(float, SQLVal,1)),0)
ORDER BY ROUND(ABS(CONVERT(float, AccessVal,1)),0) DESC
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) DESC
Here is the output with the comparison commented out...
Here's what I get with the comparison line activated:
I've tried converting to numeric, int and bigint instead of float. I've tried CAST instead of CONVERT. Nothing works.
View 13 Replies
ADVERTISEMENT
Apr 17, 2015
This is a common error for SQL Server, but I got it in a uncommon way.I have a table called - tblIDNumber where there are two columns - IDN_Number [NVarchar(200)] and Temp [BigInt]
If I run,
SELECT *
FROM dbo.tblIDNumber
WHERE IDN_IDNumberTypeStaticValue = 33
AND IDN_Removed = 0
AND CAST(IDN_Number AS BIGINT) = 1
SQL Server give me the error:
Msg 8114, Level 16, State 5, Line 1
Error converting data type nvarchar to bigint.
I first thought IDN_Number in type 33 has characters, but it doesn't, becasue the below query works!!!
UPDATE dbo.tblIDNumber
SET Temp = CAST(IDN_Number AS BIGINT)
WHERE IDN_IDNumberTypeStaticValue = 33
AND IDN_Removed = 0
To workaround, I ran the query,
UPDATE dbo.tblIDNumber
SET IDN_Number = '123'
WHERE IDN_IDNumberTypeStaticValue = 33
AND IDN_Removed = 0
and then I ran the first query, and SQL Server does NOT give me the same error - Msg 8114, Level 16, State 5, Line 1 Error converting data type nvarchar to bigint.
Second query approved there is nothing wrong from converting the value in IDN_Number to a BigInt, but the third query gave the hint that data might be the cause?????
finally, I found the root cause to be an index that the first query uses :
CREATE NONCLUSTERED INDEX [IX_tblIDNumber_Covering] ON [dbo].[tblIDNumber]
(
[IDN_Removed] ASC,
[IDNumberCode] ASC
)
INCLUDE ( [IDN_Number],
[IDN_Reference]) WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 85) ON [PRIMARY]
GO
If I remove the index, the first query works without the error.
View 10 Replies
View Related
Oct 17, 2007
Error converting data type varchar to float.
I am getting this error. Any one there to guide me
View 4 Replies
View Related
Mar 25, 2008
hello anyone... i got this message "Error converting data type varchar to float" when i was trying to insert values into table using instead of trigger...
below is my table ClimateData
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[ClimateData] Script Date: 03/26/2008 03:04:44 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[ClimateData] WITH CHECK ADD CONSTRAINT [FK_ClimateData_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below is photovoltaic table
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[Photovoltaic] Script Date: 03/26/2008 03:06:58 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_OrganizationDetail] FOREIGN KEY([Org_application_id])
REFERENCES [dbo].[OrganizationDetail] ([Org_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_Users] FOREIGN KEY([User_application_id])
REFERENCES [dbo].[Users] ([User_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below also my command for instead of trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Organization Detail already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Organization Types already in the table ***/
END -- trigger def
and finally, i hav tried using this command to insert into table v_PhotovoltaicClimateData.. this is the command to insert
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44, 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
and i got this error...
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
so anyone... plzz help me...
View 19 Replies
View Related
Mar 28, 2008
Hello everyone... i have some problem with instead of trigger... after insert values into v_PhotovoltaicClimateData, i got this error, Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
below is my DDL for Photovoltaic table
quote:CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
Below is my DDL for ClimateData table
quote:CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
below is my v_PhotovoltaicClimateData
quote:CREATE VIEW [dbo].[v_PhotovoltaicClimateData]
AS
SELECT dbo.Photovoltaic.PV_site, dbo.Photovoltaic.PV_state, dbo.Photovoltaic.PV_type_of_system, dbo.Photovoltaic.PV_nominal_power,
dbo.Photovoltaic.PV_module, dbo.Photovoltaic.PV_mounting, dbo.ClimateData.Latitude, dbo.ClimateData.Longitude, dbo.ClimateData.Altitude,
dbo.ClimateData.Climate_type
FROM dbo.ClimateData INNER JOIN
dbo.Photovoltaic ON dbo.ClimateData.PV_application_id = dbo.Photovoltaic.PV_application_id
below is my instead of trigger command...
quote:CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Photovoltaic already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Climate Data already in the table ***/
END -- trigger def
this is my commad insert values using instead of trigger that i've created...
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44 , 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
after execute this commad, i got this error..
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
what should i do??? anyone help me.
View 3 Replies
View Related
Jul 23, 2005
I have created a stored procedure that contain this field (below) inorder to meet certain criteria. But my problem is when I try to runthe stored procedure I encounter an error "Error converting data typevarchar to float".CASE Final WHEN 0 THEN '--' ELSE Final END AS FinalGradeThe Final field is a float data type.Could anyone teach me how to fix this problem?
View 1 Replies
View Related
Mar 27, 2008
Hi i keep getting this error when i search based on Team name (dropdownlist) or coach name(textbox). However it works when i make the search based on the region id(dropdownlist) here is my stored procedure;ALTER PROCEDURE [dbo].[stream_FindTeam]
-- Add the parameters for the stored procedure here
@coachName varchar(100),
@TeamName varchar(100),@regionID INT
AS
SELECT TeamID, coachName FROM Teams WHERE coachName LIKE @coachName OR TeamName= @TeamNameOR regionID = @regionID;
Here is my code;SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);
conn.Open();SqlCommand command = new SqlCommand("stream_FindTeam", conn);
command.CommandType = CommandType.StoredProcedure;command.Parameters.AddWithValue("@coachName", coachName.Text);
command.Parameters.AddWithValue("@TeamName", TeamList.SelectedValue);command.Parameters.AddWithValue("@regionID", Region.SelectedValue);SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection);
DataList1.DataSource = reader;
DataList1.DataBind();
conn.Close();
View 13 Replies
View Related
Feb 28, 2008
Hi,
I get "Error converting data type nvarchar to int." It is some kind of SQL exception. This is the code in my application.
SqlConnection sqlConnection1 = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand();
Object start;
string activityID = Session["activitygroupID"].ToString();
cmd.Parameters.AddWithValue("@ActivityGroupID", activityID);
cmd.CommandText = "get_startdate";
cmd.CommandType = CommandType.StoredProcedure;
cmd.Connection = sqlConnection1;
sqlConnection1.Open();
SqlDataReader reader = cmd.ExecuteReader(); //The code stops here!!!
start = reader["StartDate"];
sqlConnection1.Close();
The stored procedure on the SQL-server looks like so. StartDate is of DateTime type.
ALTER PROCEDURE [dbo].[get_startdate]
-- Add the parameters for the stored procedure here
@ActivityGroupID int
AS
BEGIN
SELECT StartDate
FROM dbo.CurrentGroup
WHERE ActivityGroupID = @ActivityGroupID
END
I appreciate any help!
View 4 Replies
View Related
Feb 25, 2008
I getting the above error can someone please help me solve it, here is the code:
public void InsertHost() { // TODO // - Call stored procedure to write to a log file writeToLog using (SqlConnection cn = new SqlConnection(ConfigurationManager.AppSettings["ConnectionString"])) { SqlCommand cmd = new SqlCommand("writeToLog", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@pAction", "action"); cmd.Parameters.AddWithValue("@pHostName", "Hostname"); cmd.Parameters.AddWithValue("@pUserNUm", "requestorID"); cn.Open(); cmd.ExecuteNonQuery(); } }
Here is the storedprocedure:
ALTER PROCEDURE dbo.writeToLog(@pAction varchar(10), @pUserNUm bigint, @pHostName varchar(25))AS INSERT INTO dbo.hostNameLog (action, requestorID, HostName)VALUES (@pAction, @pUserNUm, @pHostName)
Here is the table:
HostName - varchar, action - varchar, requestorID - bigint
I can't seem to find the error.
View 7 Replies
View Related
Mar 23, 2006
Hi
I have an insert stored procedure with a parameter @eventDate date type date time. I have written a web form that takes the textbox.text value and assigns to the @eventDate parameter using a querystring. Howevr when I run the application I get a SQL Exception error converting data type nvarchar to datetime.
I have tried dssqlInsertEvent.InsertParameters.add("EventDate", convert.todatetime(txtEventDate.text)); wbut received another error.
Any assistance would be greatly appreciated.
View 4 Replies
View Related
Dec 12, 2014
I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
My stored procedure:
ALTER PROCEDURE dbo.MChemsInsert
(
@LabLot nchar(10),
@Chem nchar(50),
@Source nchar(50),
@SourceLot nchar(10),
[code]....
View 2 Replies
View Related
Jun 2, 2008
Hi,
I'm pretty desperat after trying solving the above problem in several days. I hope somone here can help me :-)
I have this stored procedure. When I try to Execute the storedprocedure where I have a date as parameter I get the above error.
I checked (many times), that the input parameter is a datetime format (30-05-2008) and also I checked the tabel and it is datetime format. I checked the table to see if it was english datetime format - but all the datetimes that are listet are listed in danish datetime format DD-MM-YYYY.
In the stored procedure I try this:
fProjectSkuTimeStamp >= @ReducedTime
I can't figure out where it gets that nvarchar from?
My stored procedure look like this:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
set NOCOUNT ON
go
ALTER PROCEDURE [dbo].[GetProjectSkuList]
@fProjectFId AS INTEGER = null, --ProjektId
@ReducedTime AS DATETIME --Tidsrum fra
AS
BEGIN
SELECT tProjectSku.fProjectSkuPId, tProjectSku.fCompanyFId, tProjectSku.fProjectFId,
tProjectSku.fProjectSkuDate,
tProjectSku.fOurContactFId, tProjectSku.fOurContactF2Id, tProjectSku.fOrderFId,
tProjectSku.fProjectSkuTimeStamp,
tProjectSku.fProjectSkuNote1, tProjectSku.fProjectSkuNote2, tProjectSku.fContactFId,
tProjectSku.fStoreTransactionsFId,
tProjectSku.fProjectSkuSalesPrice, tCompany.fCompanyName, tProject.fProjectName,
tOurContact.fOurContactFirstName + ' ' + tOurContact.fOurContactLastName AS CreatedBy,
tOurContact_1.fOurContactFirstName + ' ' + tOurContact_1.fOurContactLastName AS Responsible,
tContact.fContactFirstName + ' ' + tContact.fContactLastName AS ContactFullName,
tStoreTransactions.fStoreTransactionsCostPrice,
tStoreTransactions.fStoreTransactionsSerialNo
FROM tOurContact AS tOurContact_1 RIGHT OUTER JOIN
tContact RIGHT OUTER JOIN
tProjectSku LEFT OUTER JOIN
tStoreTransactions ON tProjectSku.fStoreTransactionsFId = tStoreTransactions.fStoreTransactionsPId ON
tContact.fContactPId = tProjectSku.fContactFId LEFT OUTER JOIN
tOrder ON tProjectSku.fOrderFId = tOrder.fOrderPId ON tOurContact_1.fOurContactPId = tProjectSku.fOurContactF2Id LEFT OUTER JOIN
tOurContact ON tProjectSku.fOurContactFId = tOurContact.fOurContactPId LEFT OUTER JOIN
tProject ON tProjectSku.fProjectFId = tProject.fProjectPId LEFT OUTER JOIN
tCompany ON tProjectSku.fCompanyFId = tCompany.fCompanyPId
WHERE
(tProjectSku.fProjectFId = @fProjectFId) AND
--fProjectSkuTimeStamp >= CONVERT(datetime, @ReducedTime, 120)
fProjectSkuTimeStamp >= @ReducedTime
ORDER BY tProjectSku.fProjectSkuPId DESC
END
Kind regards,
simsen :-)
View 7 Replies
View Related
Apr 20, 2007
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
View 2 Replies
View Related
Apr 29, 2015
I am getting the above error when trying to add a dataset to my report. Here is my stored procedure below.
USE [HSIU_TEST]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [ssrs].[spKEMHWaitTimeCaseList]
[Code] .....
View 5 Replies
View Related
Jan 19, 2007
Hi,
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
View 2 Replies
View Related
Aug 24, 2007
ALTER procedure [dbo].[findConsultantMail]
(
@PerID numeric(18,0),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =@PerID)
return @perMail
I want to get Email address from sql database.
But whenever I executed stored procedure I get an error message
"Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int"
If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
View 4 Replies
View Related
Oct 13, 2012
When I run the following sql query:
"update table set price = price * 1.1 "..
I get the following error : "Msg 8115, Level 16, State 8, Line 1.. Arithmetic overflow error converting nvarchar to data type numeric. The statement has been terminated."
The table is set to nvarchar, and i am just trying to make the prices go up 10%.
View 9 Replies
View Related
Feb 13, 2008
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
View 4 Replies
View Related
Nov 17, 2015
Below is garbage data and structure (I think enough to get point across). How can I perform calculations needed?
Create Table #1234
(
abcd decimal(16,4)
,defg decimal(16,4)
,hijk decimal(16,4)
,logon datetime
,logoff datetime
[code]....
View 2 Replies
View Related
Oct 16, 2013
this query is running fine in 2008 , but its not working in 2005 below is the error Msg 8115, Level 16, State 2, Line 1 Arithmetic overflow error converting expression to data type int.there is some problem in converting date in cte
with a
as
(
SELECT dbname = DB_NAME(database_id) ,
[DBSize] = CAST( ((SUM(ms.size)* 8) / 1024.0) AS DECIMAL(18,2) )
,
COALESCE(CONVERT(VARCHAR(12), MAX(bus.backup_finish_date), 101),'01/01/1900') AS LastBackUpTime
FROM sys.master_files ms
inner join msdb.dbo.backupset bus ON bus.database_name = DB_NAME()
[code]....
View 9 Replies
View Related
Jun 5, 2015
In my inner query,
I have a column "Cost" (data type=varchar) and another column "Qty" (data type=int)
Now in outer query, I need to multiply this 2 columns Cost*Qty.But after trying some cast operation still getting "Error converting data type varchar to numeric."
View 7 Replies
View Related
May 11, 2000
I am trying to do some amount calculations.
The amount was declared as nvarchar data type.
I did the following coding. I want to get 2 places right of decimal
but am getting only one place right of decimal.
SELECT
(CAST(EQ_TotQuoteAmnt AS Float(7,2)) -
CAST(EQ_InsFee AS Float(7,2)) - 150) as Inforce_Premium
FROM Quoted
Can someone please help me with the syntax?
Thanks in advance.
M. Khan
View 1 Replies
View Related
Sep 18, 2015
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*),
CASE
WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)'
WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)'
WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)'
ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
View 8 Replies
View Related
Jun 1, 2008
i am getting this error when passing multiple checkbox values to next page..
Error is Conversion failed when converting the nvarchar value '3,4' to data type int.
my code is below
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:mobiletimesConnectionString %>"
SelectCommand = "SELECT * FROM [device] WHERE [dev_id] IN (@chk1)">
<SelectParameters>
<asp:FormParameter FormField="chk1" Name="chk1" />
</SelectParameters>
</asp:SqlDataSource><asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1"
BackColor="White" BorderColor="#CC9966" BorderStyle="None" BorderWidth="1px"
CellPadding="4" GridLines="Both">
<FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
<ItemStyle BackColor="White" ForeColor="#330099" />
<SelectedItemStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
<HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
<ItemTemplate><div class="overviewpdamain" >
<div class="overviewpdadevice">
<center>
<b><%#Eval("dev_name")%></b><br />
<b>
</b>
</center></div>
</div></ItemTemplate>
</asp:DataList>
View 6 Replies
View Related
Mar 21, 2006
I have a problem converting a float filed into nvarchar.
select cast(sold as varchar(50))
where sold=431597.15 results in 431597 and is ignoring always my decimals.
Do you have any idea how to fix this?
ty
View 1 Replies
View Related
Jan 23, 2007
Hi,
I have a webform with a drop-down listbox, binded to a table and a GridView, binded to another table. My goal is when I select a value (country in my case) in the drop-down listbox to change what is shown in the GridView, based on the ID that I get from the drop-down listbox.
Here is the code (the important parts...):
Select a Country : <asp:DropDownList ID="CountriesDropDownList" runat="server" DataSourceID="SqlDataSource2" DataTextField="Name" DataValueField="CountryID" Width="220px" AutoPostBack="True">
</asp:DropDownList>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>"
SelectCommand="SELECT [CountryID], [Name] FROM [DS_Country]">
</asp:SqlDataSource>
<asp:GridView ID="ProvincesGridView" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="ProvinceID,CountryID,Name,ShortName,Description" DataSourceID="SqlDataSource1" BackColor="White" BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" CellPadding="3" HorizontalAlign="Left" >
<Columns>
..............................
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DineSelectConnectionString %>"
DeleteCommand="DELETE FROM DS_Province WHERE ProvinceID=@ProvinceID"
SelectCommand="SELECT ProvinceID,CountryID,Name,ShortName,Description FROM DS_Province WHERE CountryID=@ddlCountryID"
UpdateCommand="UPDATE DS_Province SET CountryID=@CountryID,Name=@Name,ShortName=@ShortName,Description=@Description WHERE ProvinceID=@ddlCountryID"
InsertCommand="INSERT INTO DS_Province (CountryID,Name,ShortName,Description) VALUES (@CountryID,@Name,@ShortName,@Description)">
<SelectParameters>
<asp:ControlParameter Name="ddlCountryID" ControlID="CountriesDropDownList" PropertyName="DataValueField" />
</SelectParameters>
</asp:SqlDataSource>
When I run it I get this error "Syntax error converting the nvarchar value 'CountryID' to a column of data type int.". If I specify the Type="Int" in <asp:ControlParameter>..</> I get "Input string was not in a correct format. "
This is supposed to be easy, but I can't make it work ! Any suggestions will be more than welcome.
Thanks.
View 10 Replies
View Related
Sep 4, 2007
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery)
Conversion failed when converting the nvarchar value xxxxxxxxx to data type int.
Kindly give your suggestions to solve this problem.
View 10 Replies
View Related
Jun 11, 2014
So I have two tables with similar columns etc, unfortunately the Insert to the History table fails. Noto sure how to format.
Source Table.
CREATE TABLE [dbo].[SKUCURRENT](
[UID] [int] IDENTITY(1,1) NOT NULL,
[SKU] [nvarchar](100) NOT NULL,
[WHSELOC] [nvarchar](50) NOT NULL,
[WEIGHT] [nvarchar](50) NOT NULL,
[Code] ....
View 1 Replies
View Related
Sep 3, 2015
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1
WHEN NULLIF(Surname, '') IS NULL THEN 2
WHEN NULLIF(Forename, '') IS NULL THEN 3
WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4
WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
1 = NHS
2= SUR
3=FOR
4=DOB
5=ADD
6=PCO
7=GPN
8=PCZ
9=GPD
10=CCG
View 3 Replies
View Related
Nov 13, 2015
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.
With Disk_Space (ResourceID, ComputerName, Description, DiskName, VolumeName, FileSystem, Size, FreeSpace)AS
(
SELECT distinct
SYS.ResourceID,
SYS.Name,
LDISK.Description0,
LDISK.DeviceID0,
LDISK.VolumeName0,
LDISK.FileSystem0,
[code]...
However when i run this query, i get an error :
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
View 10 Replies
View Related
Sep 2, 2015
I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB
ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014
I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."
Convert (varchar(10), "StartDate", 110)+1 as Next Day
View 8 Replies
View Related
Jul 20, 2015
I am getting this error when I run the case statement below. I think I have to convert at some point, but not sure where or how.
Case when m.dispo = 2 then 'Inactive' else m.value end 'Score'
View 9 Replies
View Related
Aug 19, 2015
I am trying to convert a column (nvarchar) to date time.
Here is an example of some values:
20110905
20110901
20111003
As expected, I received the following error: 'Conversion failed when converting date and/or time from character string.'
However, I am unsure how I should approach updating the whole column. I would like the format to be '103'.
View 9 Replies
View Related
