Transact SQL :: Get Min Date Row From Join Table
Sep 10, 2015
I have the following 2 tables:
Location:
Policy:
1 Location can be attached to many policies.
I need to create a query to get 1 row per location and get the minimum PolicyBookingDt and RowUpdateDt from the policy table. All the attributes from the Location table should also be from the Policy that has the minimum PolicyBookingDt.
So from the above example, i need to get the following:
Getting a little confused on how to create the syntax for this.
View 4 Replies
ADVERTISEMENT
Oct 8, 2015
I was writing a query using both left outer join and inner join. And the query was ....
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
INNER JOIN Production.Categories AS C
[code]....
However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases
i.e..
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
LEFT OUTER JOIN Production.Categories AS C
ON C.categoryid = P.categoryid)
ON
S.supplierid = P.supplierid
WHERE
S.country = N'Japan';
The result i got was same,i.e
supplier country productid productname unitprice categorynameSupplier QOVFD Japan 9 Product AOZBW 97.00 Meat/PoultrySupplier QOVFD Japan 10 Product YHXGE 31.00 SeafoodSupplier QOVFD Japan 74 Product BKAZJ 10.00 ProduceSupplier QWUSF Japan 13 Product POXFU 6.00 SeafoodSupplier QWUSF Japan 14 Product PWCJB 23.25 ProduceSupplier QWUSF Japan 15 Product KSZOI 15.50 CondimentsSupplier XYZ Japan NULL NULL NULL NULLSupplier XYZ Japan NULL NULL NULL NULL
and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.
View 5 Replies
View Related
Sep 14, 2015
I need to Filter Employees by Available Date and grab their Basic contact information
I used Join to Join both tables but I can't seem to find a way to only get data from employees where DateAv > SelectedDate.
I'm using this in a SqlCommand with C#.
SELECT " EmployeeNameTable.ID, EmployeeNameTable.FullName, EmployeeNameTable.DateAV,ContactTable.HomePhone, ContactTable.MobilePhone, ContactTable.Email FROM EmployeeNameTable INNER JOIN ContactTable On EmployeeNameTable.ID = ContactTable.ID OrderBy EmployeeNameTable.FullName"
This code loads all employees Successfully but it doesn't filter them by the DateAV Column which is in Date Format.
View 2 Replies
View Related
Aug 31, 2015
So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?
View 2 Replies
View Related
Aug 15, 2015
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:-
GO
ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details]
@Class_Id int
AS BEGIN
[code] ....
View 9 Replies
View Related
Jul 14, 2015
I have a table like this :
reg.no | description | start_date | end_date | load_date
I want to join this table with itself on reg. no. But not all the rows in table must be joined.
But for example, rows with load_date 01-07-2015 to be joined with rows with load_date 02-07-2015. And the rest of the rows should not used in join (for example, rows having other load_dates)
Is this possible ? and how?
View 4 Replies
View Related
Sep 7, 2015
I have table A with colums ID and Product. I have table B with ID (same as table A) and revenue of product.
I need to update the field Product of table A with the revenue of table B.
I'm confuse with the update joining both tables. I tried this, but obviously has an error:
Update A set Product=B.Revenue where A.ID=B.ID
View 6 Replies
View Related
Jun 1, 2015
I have a criteria where i want to join table 1 with table 2 , table 1 consists of products which were given to salesman to sell and table 2 has the sales data which salesman has sold out. Now i want to know left over products of each sales with join .Below is my data, here is what i am trying to do, but it return only salesman 1 data.
CREATE TABLE Salesman_Product
(
SalesManID int,
ProductID int
)
INSERT INTO Salesman_Product (SalesManID,ProductID) Values (1,1),(1,2),(1,3),(1,4)
INSERT INTO Salesman_Product (SalesManID,ProductID) Values (2,1),(2,2),(2,3),(2,4)
[code]....
View 6 Replies
View Related
Aug 7, 2015
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10))
insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1')
insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2')
insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1')
insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
[code]....
View 4 Replies
View Related
Jun 30, 2015
I have two linked tables from two different databases, there is a column "product" on each table however the product on one table has a Prefix so not a direct match. How can I join these tables ? In the query I have used product2: Replace([scheme_pos.product],"-B","") then tried Joining on product2 but it says JOIN not supported.
View 2 Replies
View Related
May 12, 2015
In Master tabel i have these date datas
2015-05-10
2015-05-11
2015-05-12
SO when i try to load from Master table to parent and child table i am using using expresssion like
select B.ID,A.* FROM FLATFILE_INVENTORY AS A JOIN DMS_INVENTORY AS B ON
A.ACDealerID=B.DMSDEALERID AND A.StockNumber=B.STOCKNUMBER AND
A.InventoryDate=B.INVENTORYDATE AND A.VehicleVIN=B.VEHICLEVIN
WHERE convert(date,A.[FtpDate]) = convert(date,GETDATE()) and convert(date,B.Ftpdate) = convert(date,getdate()) ;
If i use this Expression i am getting the current system date data's only from Master table to parent and child tables.
My Problem is If i do this in my local sserver using the above Expression if i loaded today date and if need to load yesterday date i can change my system date to yesterday date and i can run this Expression.so that yeserday date data alone will get loaded from Master to parent and child tables.
If i run this expression to remote server i cannot change the system date in server.
while using this Expression for current date its loads perfectly but when i try to load yesterday data it takes current date date only not the yesterday date data.
What is the Expression on which ever date i am trying load in the master table same date need to loaded in Parent and child table without changing the system Date.
View 10 Replies
View Related
Sep 13, 2015
I am still new to SQL and I am having trouble obtaining the results I need from a query. I have worked on this command for some time and searched the internet but cannot seem to still get it correct.
I have a table called Patient. It's primary key is pat_id.
I have a second table called Coverage. It has no primary key. The foreign keys are pat_id, coverage_plan_id, and hosp_status.
I have a third table called Coverage_History. It has a primary key consisting of pat_id, hosp_status, copay_priority, and effective_from.
I want to get the pat_id and all the coverage information that is current. The coverage table contains specific insurance policy information. The coverage_history table will indicate the effective dates for the coverage. So the tables could contain something like this:
Patient (pat_id and lname)
P123 Monto
P124 Minto
P125 Dento
P126 Donto
Coverage (pat_id, coverage_plan_id, hosp_status, policy_num)
P123 MED1 OP A1499
P123 ACT4 OP H39B
P124 MED1 OP C90009
P124 RAC OP 99KKKK
P124 RAC OP 99KKKK
P124 MED1 OP C90009
P125 ARP OP G190
P126 BCB OP H88
Coverage_History (pat_id, hosp_status, copay_priority, effective_from, coverage_plan_id, effective_to)
P123 OP 1 20150102 MED1 NULL
P123 OP 2 20150102 ACT4 NULL
P124 OP 1 20150203 RAC 20150430
P124 OP 2 20150203 MED1 20150430
P124 OP 1 20150501 MED1 NULL
P124 OP 2 20150501 RAC NULL
P125 OP 1 20150801 ARP NULL
P126 OP 1 20150801 BCB 20160101
select p.pat_id, p.lname, ch.coverage_plan_id, ch.hosp_status, ch.effective_from, ch.effective_to, ch.copay_priority,
from patient p
left join
( coverage_history ch left join coverage c on ch.coverage_plan_id = c.coverage_plan_id and ch.patient_id = c.patient_id and
(ch.effective_to is NULL or ch.effective_to >= getdate()
)
) on ch.patient_id = p.patient_id
where ( ch.effective_to is NULL or ch.effective_to >= getdate() )
So I want to see:
P123 Monto MED1 OP 20150102 NULL 1
P123 Monto ACT4 OP 20150102 NULL 2
P124 Minto MED1 OP 20150501 NULL 1
P124 Minto RAC OP 20150501 NULL 2
P125 Dento ARP OP 20150801 NULL 1
P126 Donto BCB OP 20150801 20160101 1
View 6 Replies
View Related
Dec 2, 2015
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName
SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)'
Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
Note: ROW is Partition By ColumnA,ColumnB
TableName: PromotionList
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 0 NULL
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 0 NULL
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
Expected outcome after performing update on the table
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 1 Overlap with row ID 4
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 Overlap with row ID 5
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
View 4 Replies
View Related
May 23, 2001
I have two tables that I am trying to join and both have similar columns with which I am trying to use. One is Date and the other is LOGdate. Date's format is "01/01/2000" BUT LOGdate's is "01/01/2000 12:41:00 PM/AM". Can I join these two tables?
Any help would be greatly appreciated.
Thank you
View 1 Replies
View Related
May 23, 2001
I have two tables that I am trying to join and both have similar columns with which I am trying to use. One is Date and the other is LOGdate. Date's format is "01/01/2000" BUT LOGdate's is "01/01/2000 12:41:00 PM/AM". Can I join these two tables? If yes how do I get rid of the excess time on LOGdate.
Any help would be greatly appreciated.
Thank you
View 2 Replies
View Related
Jul 16, 2014
I have 2 tables:
Table Transaction
-----------------
EmpID TransDate
00001 1/1/2014
00001 1/2/2014
00001 1/3/2104
00001 1/4/2014
00001 1/5/2014
00001 1/6/2014
00001 1/15/2014
00001 2/1/2014
00001 2/2/2014
00001 2/20/2004 ....
Table Master
---------------------------
EmpID EffectiveDateFr Group
00001 1/1/2014 A
00001 1/5/2014 B
00001 1/9/2014 C
00001 2/1/2014 B
00001 2/20/2014 A ....
I want to create query the output should be:
EmpID TransDate Group
00001 1/1/2014 A
00001 1/2/2014 A
00001 1/3/2104 A
00001 1/4/2014 A
00001 1/5/2014 B
00001 1/6/2014 B
00001 1/15/2014 C
00001 2/1/2014 B
00001 2/2/2014 B
00001 2/20/2004 A
View 4 Replies
View Related
Sep 18, 2015
Have the following 2 tables:
create table #LiabilityConstraint
(
PolNum varchar(10),
LcCode varchar(10),
LcDsc varchar(100),
LcAmt decimal(18,2),
LcFreq varchar(10),
LcSetId int
[code]....
there is a many to many relation between the tables. Each Policy can have 1 or many Liability Constraints. Each Liability Constraint can be attached to 1 or many policies.
What I need to do is get the distinct combination of LcCode, LcDesc, LcAmt, LcFreq and LcSetId from the Liability table as well as the earliest PolInceptionDt from any of the policies associated with the Liability Constraint using only the distinct combination of LcCode, LcDesc, LcAmt, and LcFreq.
Give the data above, I would need to end up with the following result:
I tried to use the Row_Number functionand join using PolNum, but I keep getting the wrong results back.
View 4 Replies
View Related
May 20, 2015
I have a data in table like COLA = '200909' and COLB ='092009'
how to convert it to YYYY-MM format
COLA = 2009-Sept
COLB =Sept-2009
View 8 Replies
View Related
Oct 20, 2015
I need to take all records from table @A where ID = 1. Also i need to process the records with datewise from table @A. Here is the table structure
DECLARE @A TABLE (ID INT, ACCOUNT VARCHAR(10), EFFDT DATE)
INSERT INTO @A VALUES (1,'AAA','2015-10-01')
INSERT INTO @A VALUES (1,'BBB','2015-10-01')
INSERT INTO @A VALUES (1,'CCC','2015-10-01')
INSERT INTO @A VALUES (1,'AAA','2015-10-05')
INSERT INTO @A VALUES (1,'DDD','2015-10-01')
INSERT INTO @A VALUES (2,'AAA','2015-10-02')
INSERT INTO @A VALUES (2,'BBB','2015-10-02')
INSERT INTO @A VALUES (2,'CCC','2015-10-02')
INSERT INTO @A VALUES (2,'DDD','2015-10-02')
[code]...
how to achieve this in SQL query, i cannot use CTE or temp table as i need to use this code in another tool, it has to be single query, can use subquery or join would be better.
View 4 Replies
View Related
Apr 23, 2015
I'm trying to rename a table with date suffix at the end of the table name, and drop the date suffix table which is greater than 7 days. for that I have the below sql, I have not included the drop syntax in this.
I'm not able to rename with the date suffix in the below sql, syntax error at '+'
DECLARE
@TPartitionDate date
IF EXISTS (SELECT * FROM sysobjects WHERE Name = 'IIS_4')
BEGIN
SELECT
@TPartitionDate = MAX(PartitionDate)
FROM PartitionLog (NOLOCK)
EXEC sp_rename 'IIS_4','IIS_4_'+ @TPartitionDate
END
View 2 Replies
View Related
Nov 19, 2015
I want to update the STATUS column based on min date in my table.
For example – If minimum BOOKING_DATE of any RecieptID is below to 2015-10-01, then Status of that RecieptID should be 0 for all records pertaining to dedicated RecieptID So I need an output in this way.
View 3 Replies
View Related
Oct 11, 2013
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[APPL_STATUS_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[STATUS_START_DATE] [datetime] NULL,
[STATUS_END_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]...
View 10 Replies
View Related
Sep 10, 2015
I have a calendar table against entire year 2015 with each day with 2 flag,
1. WK_DT_IN == except Satarday and Sunday, value is "Y", for Sat/Sun, value is "N"
2. HOL_DT_IN == value will only be "Y" only for holiday, example for '2015-01-01' date, it's value is "Y"
DECLARE @CAL TABLE (CAL_DT DATE, WK_DT_IN CHAR(1), HOL_DT_IN CHAR(1))
INSERT INTO @CAL VALUES ('2015-01-01', 'Y', 'Y'), ('2015-01-02', 'Y', 'N'),('2015-01-03', 'N', 'N'),
('2015-01-04', 'N', 'N'), ('2015-01-05', 'Y', 'N'), ('2015-01-06', 'Y', 'N'), ('2015-01-07', 'Y', 'N')
We have a given date, example '2015-01-01', I need to find out a date after 2 business days? I can think of loop, but will it work.
I need to exclude date which having HOL_DT_IN = "Y" and WK_DT_IN = "N".
View 3 Replies
View Related
Jun 25, 2015
what would be the TSQL in trying to create a new table with date-time format ending via a select into like:
select
*
into tblResults_
+
SELECT
CONVERT(VARCHAR(10),GETDATE(),112)
+
'_'
+
REPLACE(CONVERT(VARCHAR(10),GETDATE(),108),':','_')
from qryResult
View 3 Replies
View Related
Oct 30, 2015
Lets say I have a table, tblPersons
FirstName | LastName | DateofBirth
----------------------------------------
Thomas | Alva Edison | 10-10-2015
Benjamin | Franklin | 10-10-2015
Thomas | More | 11-10-2015
Thomas | Jefferson | 12-10-2015
Suppose today's date is 09-10-2015 in (dd-MM-yyyy format), I want to perform a query in such a way that I should get the data from the table above WHERE DateofBirth is tomorrow, so I could get the following result.
FirstName | LastName | DateofBirth
----------------------------------------
Thomas | Alva Edison | 10-10-2015
Benjamin | Franklin | 10-10-2015
View 15 Replies
View Related
May 19, 2014
I created a dbo.Calendar table that stores dates and a work day flag (1=work day, 0=non-work day) so I can use it to calculate the next business date from a date using a function. I'm using a while group to count only the work days and a couple other internal variables but I'm not sure if I can even use them in a function.
Assuming Sats & Suns are all non-work days in April 2014, if my @WorkDays = 10 for 10 work days and my @DateFromValue - 4/1/2014, I would expect my return date to be 4/15/2014.
------ Messages after I click execute on my query window that has my function ------------------------------------------------------
Msg 444, Level 16, State 2, Procedure FGetWorkDate, Line 19
Select statements included within a function cannot return data to a client.
Msg 207, Level 16, State 1, Procedure FGetWorkDate, Line 20
Invalid column name 'WorkDay'.
Msg 207, Level 16, State 1, Procedure FGetWorkDate, Line 22
Invalid column name 'Date'.
------ my function code ----------------------------
CREATE FUNCTION [dbo].[FGetWorkDate](
@WorkDays VARCHAR(5),
@DateFromValue AS DateTime )
RETURNS DATETIME
[Code] ....
View 10 Replies
View Related
Oct 14, 2015
I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
View 4 Replies
View Related
May 8, 2015
I need sql query to select max date shipment where sum of quantity required > sum of quantity shipped from sales line table but i dont know how to make my sales line table as following
shipment date quantity required quantity shipped
07/05/2015 200 100
07/05/2015 300 300
07/05/2015 100 50
06/05/2015 200 100
06/05/2015 200 200
Here the result of query i need is max shipment date is 07/05/2015 and quantity required is 600 and quantity shipped is 450 so tat i must select this date because quantity Required is big from quantity shippedmy question How i write the query get result above in sql server 2005.
View 9 Replies
View Related
Apr 30, 2015
So I have to build dynamic T-SQL because of a date parameter that will be provided. The Date Parameter will be provided in SSRS in normal MM/DD/CCYY format. So how do I then convert that date to my Oracle format
NUMERIC(8,0) CCYYMMDD?
I tried this...
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF<='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF>='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
but that put it in the format of...
AND
MEMBER_SPAN.YMDEFF<=''2015-04-01''
AND
MEMBER_SPAN.YMDEFF>=''2015-04-01''
Which is close...I think I just need to lose the "-"
View 5 Replies
View Related
Nov 16, 2015
SELECT * ,[Due]
FROM [Events]
Where Due >= getdate() +90
This returns the error: Conversion failed when converting date and/or time from character string
Why would this be? How to cast or convert this so that it will work?
View 24 Replies
View Related
Nov 26, 2015
CREATE TABLE #Dateissue
(ID int,
Code nvarchar (20),
Datein datetime,
Declined datetime )
[Code] .....
I have a table here. I want find a way of getting the latest date, when the code is the same. If the Declined date is null. Then I still want the latest date. E.g. ID 3.
If the declined date is filled in. Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but i got an error message when trying this out. Against the code
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. What do I need to do to get both my outputs working?
View 9 Replies
View Related
Oct 28, 2015
i have written a sql function which returns only number of working days (excludes holidays and Weekends) between given StartDate and EndDate.
USE [XXX]
GO
/****** Object: UserDefinedFunction [dbo].[CalculateNumberOFWorkDays] Script Date: 10/28/2015 10:20:25 AM ******/
SET ANSI_NULLS ON
GO
[code]...
I need a function or stored procedure which will return the date which is 15 working days (should exclude holidays and Weekends) prior to the given future Date? the future date should be passed as a parameter to this function or stored procedure to return the date. Example scenario: If i give date as 12/01/2015, my function or stored procedure should return the date which is 15 working days (should exclude holidays and Weekends) prior to the given date i.e 12/01/2015...In my application i have a table tblMasHolidayList where all the 2015 year holidays dates and info are stored.
View 18 Replies
View Related
Apr 19, 2015
My requirement is to get the earliest start date after a gap in a date column.My date field will be like this.
Table Name-XXX
StartDate(Column Name)
2014/10/01
2014/11/01
2014/12/01
[code]...
In this scenario i need the latest start date after the gap ie. 2015/09/01 .If there is no gap in the date column i need 2014/10/01
View 10 Replies
View Related
