Transact SQL :: Getting Primary Key Values As A List Of Values
Oct 14, 2015
I am trying to audit data quality based on some defined data quality rules. The rules are stored in tables and processed using stored procedures. I am facing a problem while generating audits. Let's say I am trying to audit data in OrderDetail table. The table design is mentioned below...I inserted some sample data into the table using RedGate data generator.The audit table output I am expecting is as mentioned in the screenshot below
Its the PrimaryKeyAttributeValues column I am facing problems with. I am using STUFF function within a dynamic SQL query to get the primary key's as a list of comma separated values.
I have [TableAccount.AccountType] field which can store these values:
Value C S E
How do I list all available values for a field? Using Distinct can only list all entries in the db, but does not list all values available for the field.
I need swapping values in rows of tables based on primary.
I will explain my scenario with the below example.
ID         Name                 Value   ---         --------                --------Â
1Â Â Â Â Â Â Â Â Â Â Â Â name1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 202 2Â Â Â Â Â Â Â Â Â Â Â Â name1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 203 3Â Â Â Â Â Â Â Â Â Â Â Â name2Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 203 4Â Â Â Â Â Â Â Â Â Â Â Â name2Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 202 5Â Â Â Â Â Â Â Â Â Â Â Â Â name3Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 204
In the above example, I want to swap Value 202 and 203 but its not straight forward. I want to swap in a way that, I need to group by Name column and check if 203 comes first in the group then swap else don't.
In the above example, I need to swap the values for name2 but not for name1. Below query is performing a straight forward swap.
UPDATE TblTest SET Value = CASE WHEN Value =202 THEN203 ELSE202 END
I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :
declare @id varchar(50) set @id= '3,4,6,7' set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype select *from ehsservice where id in(@id)
But this query throws following error message:
Conversion failed when converting the varchar value '3,4,6,7' to data type int.
I developed the following T-SQL query that runs successfully, but I was looking for a more efficient and concise way to do this. Is there a CTE that can replace all of these case statements? I've updated my query as below. Although this sample query works, it's not working for my real data. Instead, I get an error. At the bottom is the error part of my real query.I copied all of the tables from the first query block below. But when I wrote the bottom query block, it underlined in red the words "answer" and "question." It says "Invalid column name".Â
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#hard_values') ) DROP TABLE #hard_values; if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#dummy_data') ) DROP TABLE #dummy_data; if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#temp')
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red  - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red  - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
          red   blue  green   pen       2    0    1   marker    0    1    0   pencil      1    3    0   highlighter  1    1    1Â
We tried Sum but not able to display in single row.
I have a table with 2 columns and my source data looks like this..
PolicyNum  InsCode   Â
1ABC12Â Â Â Â Â Â Â Â 1001Â Â Â Â Â Â Â Â 1ABC12Â Â Â Â Â Â Â Â Â 1002Â Â Â Â Â Â Â Â 1ABC12Â Â Â Â Â Â Â Â Â 1003Â Â Â Â Â Â Â 1ABC12Â Â Â Â Â Â Â Â Â 1004Â Â Â Â Â Â Â 1ABC12Â Â Â Â Â Â Â Â Â 1005Â Â Â Â Â Â Â Â
[Code] ....
My output should look like this..I need T-sql to get below output.
PolicyNum  InsCode1  InsCode2   Â
1ABC12Â Â Â Â Â Â Â Â Â Â Â 1001Â Â Â Â Â Â 1005Â Â Â Â Â Â Â 1ABC12Â Â Â Â Â Â Â Â Â Â Â Â 1002Â Â Â Â Â Â 1006Â Â Â Â Â Â Â Â 1ABC12Â Â Â Â Â Â Â Â Â Â Â 1003Â Â Â Â Â Â 1004Â Â Â Â Â Â Â 1ABC20Â Â Â Â Â Â Â Â Â Â Â Â 1001Â Â Â Â Â Â 1005Â Â Â Â Â Â Â Â
[Code] ...
Basically it's converting certain row values to new column. Every PloicyNum will have 1001 to 1006 Fixed InsCode values as a group.
Rule-1: InsCode value 1001 should always mapped to 1005Â Â Â Â Â Â Â Â Â Â Â Â Â InsCode value 1002 should always mapped to 1006 Â Â Â Â Â Â Â Â Â Â Â InsCode value 1003 should always mapped to 1004Â
Rule-2: For a policyNum, If any Inscode value is missed from the group values 1001 to 1006, still need to mapped with corresponding values as shown in Rule-1
In the above sample data..
for PolicyNum - 1ABC20 , group values 1003,1006 are missing for PolicyNum - 1ABC25 , group values 1002,1003,1004,1005,1006 are missing
Create Table sampleDate (PolicyNum varchar(10) not null, InsCode Varchar(4) not null) Insert into Sample Date(PolicyNum, InsCode) Values ('1ABC12','1001')Â Â Â Â Â Â Â Â
Insert into Sample Date(PolicyNum, InsCode) Values ('1ABC12','1002')Â Â Â Â Â Â Â Insert into Sample Date(PolicyNum, InsCode) Values ('1ABC12','1003')Â Â Â Â Â Â
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
I have a stored procedure that selects the unique Name of an item from one table.Â
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
Hi all. I need to create a select query in my program that will select from a list of values that are stored in a dataset. Let see this example: selectcmd = "Select * from mytable where myfile =" ??????? cmd = New SqlCommand(selectCmd, da.SelectCommand.Connection)
The values I need to put on ????? are stored in a dataset. For example if the dataset is populated with the following values: A B C D E
I would like to build a query like that: selectcmd = "Select * from mytable where myfile = ‘A’ or ‘B’ or ‘C’ or ‘D’ or ‘E’ “
I have a dropdownlist that is populated with an sqldatasource as follows:
SELECT [Project_ID], [Title] FROM [Projects] WHERE [Username] = @Username AND Hide ='false'
The Datavalue vield of the DDL is populated with the [Title].
When the user submits the form [including the value of the of the drop down list] i want to be able to add the Project ID and the Title Values into another database table.
For a controlParameter in the ASP code, how do I retreive the selectedValue of the drop down list?Would this work? <asp:controlParameter Name="InvoiceNumber" Type="String" ControlID="ddAdSize.Value" />
[Flat File Source [212]] Error: The "output column "Column 0" (237)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Column 0" (237)" specifies failure on error. An error occurred on the specified object of the specified component"
I note under BIDS, Properties tab, that the Flat File is assigned an ID of 212. But is the number (237) and ID or an error value? How can I list all "ID's" used in a package?
Hello group:I've done alot of reading on this subject somewhat and have found thatmany people have many different opinions on this subject. My questioncenters mainly around using a lookup table to enable users to select apre-defined list of values.I have developed a practice myself of avoiding AutoNumber type datafields for primary keys where the primary key will be related to achild table. Nevertheless, what do most users do with lookup tables?My thoughts are to create a small key value for each value in thelookup table. For example:I might have a Carriers table which shows a list of carriers that Imight ship an order by. One of the entries may be 'Air Freight -Overnight', or 'Air Freight - 2nd Day Air'. I've seen a few exampleswhere the primary key field for each entry like these would beautonumber, or at least, a numeric value. What I like to do is createmy own key, like for 'Air Freight - Overnight', I might use 'AFO' forthe key, and for 'Air Freight - 2nd Day Air', I might use 'AF2'. Anythoughts on this? Mine are that even tho the users may never see thisvalue - I, as the developer will see it and I tend to prefer a keyvalue based on real data that means something other than anauto-incremented number. In referencing the well-known Northwind.mdbdatabase, I noticed their Categories table used a number field value,like 1, 2, 3....etc, but their customers table used values like'ALFKI' to represent their key values.What are some other thoughts out there? I'm working with Accesscurrently, but this project is about to move to SQL Server.James
Does anyone know how should I create a table in order that I can insert values(numbers) in the primary key field, using insert statements. I also would like to know if there are any differences between SQL 2k and SQL 2k5.
Hello I have a newbie question. If I have a table of the form:Table1{id, name} with the valuesid: 9 , name: test1,id: 7 , name: test2,id: 3 , name: test3,id: 15 , name: test4, id: 5 , name: test5,id: 13 , name: test6,.........If I have a list generated from user selection ( LIST{1, 7, 8, 15} ,) will I in a way be able to use this list in a query of the form, thus only having to make one query to the database: SELECT id, nameFROM Table1WHERE Table1.id in LIST Or is the solution to make multiple queries to the database, one for each member of the list, of the form:SELECT id, nameFROM Table1WHERE ID = @IDThanks in advance /dresen
I would like to write a select statement where I specify a list of values in the 'Select' line, and would like the output to have one line for each element.
I tried using Case with no success.
For example:
Select a.id, a.timestamp, ('rowA','rowB') as 'Tag' from tableOne a where a.id = '1'
So the 'where' line would produce one row, however, the overall statement would produce two.
ID TimeStamp Tag -------------------------------- 1 2012-12-12 rowA 1 2012-12-12 rowB
I'm looking for a way to store a list of values in a variable. The query user will need to input a list of file numbers, and my query will need to perform a couple operations on that same list of values, which is why it seems a variable would be most appropriate.
I can't obtain the list of values from the database as they will have to be entered by the user. I'm imagining storing these in a table variable.... User just copies/pastes the list of values somewhere into the query code and executes as usual.
We're using MS Access 2010 as a frontend to an SQL server back-end. From Access, I can run read-only queries and pass-through queries. I'd like to use a local Access table as part of a join to server data. As a non-pass-through query, it's slow; about 5 min to join to 2 other tables.
I could use VBA to turn the local table into part of a pass-through query, with a large in() statement, or several where x='' ors but the local table may have 50000 entries in it. Is there a good or right way to pass this data in the query if I don't have write access to the server?
Hi,I like to have a SQL script which could update a table to set one attributeto a random value picked from a given list. The prototyping code is asbelow:select @value_list = ('John', 'David', 'Mathew', 'Paul')....update EMP set emp_name = @random_namewhere ...where random name is randomly got from the given list. Of course there willbe a cursor so that different row may have different random name but notnecessary unique. Also the attribute and the list could be any valid commonSQL data typesThanks!Ximing
I would like to get the primary key values in a DML CREATE TRIGGER as follows: CustomerID = 12 AND InvoiceID = 50 I create the DML trigger for UPDATE and DELETE only, how do I retrieve the values as above ? Jon Galloway provided a sample in http://weblogs.asp.net/jgalloway/archive/2008/01.aspx but the Primary Key Field and Primary Key Value were inserted into separate columns while I need to combine the Primary Key Field and Primary Key Value into 1 single field, using his example, I want to form the primary key as: ScoreId = 423 ScoreId = 3064 etc. Note that his example only show a single primary key in a table whereas I need to handle multiple primary keys in a table.
I am inserting a value from vb.net to sql server 7. i created a table in the sqlserver with primary key. In VB.net form i didnt check the values of the check box. when i try to save the empty or null the sql server should throw the error. but its accepting the null value. how is it possible? can anyone help me? FYI: table name: JobMast Fields: jobcode int primary key jobtitle varchar(10)
