Transact SQL :: How To INSERT Column Into MyTable
Jun 8, 2015How to INSERT new column(Field) into MyTable
1. FirstName nvarchar(50)
2. LastName nvarchar(100)
3. Student bit Checked
4. CreateDate datetime
5. HwoOld float Checked
ADVERTISEMENT
Transact SQL :: Additional Column With Bulk Insert?
Aug 11, 2015Need to know a mode whereby somehow I can every time insert an additional column in a table while bulk inserting data to an existing table from a new flat file thus identifying the file from which, or the time when, the data was inserted in an existing table.
View 2 Replies View RelatedTransact SQL :: Key Increment Even On Failed Insert Into On One Column
May 28, 2015The reason why cust_id started at #4 and not #1 is because I failed to insert property three times in a row for having "Tatoine" instead of "WI" or a state less than 5chars nchar(5) correct? Then when I did a valid statement, the row was created at the starting number of four. I imagine this prevents users from having duplicate cust_ids. This however is also where rollback and similar commands could be handy correct or is there something more obvious I'm missing on a failed "insert into" to not increment the cust_id. The three rows 1,2 and 3 do not exist I believe and are not null. Having null values would of contradicted the table where two columns "not null" are a requirement.
CREATE TABLE customersnew
(
cust_idINTNOT NULL IDENTITY(1,1),
cust_nameNCHAR(50)NOT NULL,
cust_addressNCHAR(50)NULL ,
cust_cityNCHAR(50)NULL ,
cust_stateNCHAR(5)NULL ,
[code]...
Transact SQL :: XML Data Column - Insert Into Another Table
May 29, 2015I have table with about 10000 rows, there is a column named Raw_XMLData is defined as varchar but data is xml format.
I try to insert into another table, if Raw_XMLData column has is valid xml data?
Is it possible to do in T sql?
Transact SQL :: Populate Column On Insert Based On Value From Another Table
Jul 26, 2015I have the following 2 tables:
Table: classes Columns: classID, hp
Table: char_active Columns: name, classID, hp
The classes table is already populated.
What I want to do is insert a new row into char_active using the name and classID column, and have the HP column auto populate based on the corresponding value in the classes table. This is the trigger I wrote but I'm getting the error
Incorrect syntax near 'inserted'.
I'm new to sql, this is actually the first trigger I've tried writing.
create trigger new_hp on curr_chars.char_active
instead of insert
as
declare @hp tinyint
select @hp=lists.classes.hp from lists.classes where lists.classes.classID=inserted.classID
insert into curr_chars.char_active (name, classID, hp) inserted.name, inserted.classID, @hp
go
Transact SQL :: Instead Of Insert / Verify Not Inserting Into Identity Column
Apr 24, 2015I am writing an Instead of Insert trigger. I would like to fire an error when inserting into an 'Identity' column. Since UPDATE([ColumnName]) always returns TRUE for insert statements, is there an easy/fast way around this? I don't want to use:
IF(EXISTS(SELECT [i].[AS_ID] FROM [inserted] [i] WHERE [i].[AS_ID] IS NULL))
here is my pseudo-code...
CREATE VIEW [org].[Assets]
WITH SCHEMABINDING
[Code] .....
-- How does this statement need to be written to throw the error?
--UPDATE([AS_ID]) always returns TRUE
IF(UPDATE([AS_ID]))
RAISERROR('INSERT into the anchor identity column ''AS_ID'' is not allowed.', 16, 1) WITH NOWAIT;
-- Is there a faster/better method than this?
IF(EXISTS(SELECT [i].[AS_ID] FROM [inserted] [i] WHERE [i].[AS_ID] IS NOT NULL))
RAISERROR('INSERT into the anchor identity column ''AS_ID'' is not allowed.', 16, 1) WITH NOWAIT;
-- Do Stuff
END;
-- Should error for inserting into [AS_ID] field (which is an identity field)
INSERT INTO [org].[Assets]([AS_ID], [Tag], [Name])
VALUES(1, 'f451', 'Paper burns'),
(2, 'k505.928', 'Paper burns in Chemistry');
-- No error should occur
INSERT INTO [org].[Assets]([Tag], [Name])
VALUES('f451', 'Paper burns'),
('k505.928', 'Paper burns in Chemistry');
Transact SQL :: How To Insert Dynamic Column Values Of A Table To Variables
Jul 18, 2015I am trying to insert different number of columns into variables. This is what it does If I use a static columns.
declare @AccountType nvarchar(10)
declare @Total numerical(15,2)
declare @1 numerical (15,2)
declare @2 numerical (15,2)
declare @3 numerical (15,2)
#MonthtoDate temp table is created using a dynamic pivot query.
Data looks like this :
Account Type 1 2
3 Total
Type 1 3
0 4 7
Type 2 5
7 1 13
Select @AccountType = AcctType , @Total = MonthToDate, @1 = [1], @2 = [2], @3 = [3] from #MonthtoDate
However the issue is with [1],[2],[3] columns. Those are the number of days of the month. If today is the 3rd day of the month, we only need to show 3 days. So the final table has column [1],[2],[3] and @AccountType and @Total .
We want to run this query everyday to get the moth to date values.If we run this tomorrow, it will have 4 date columns [1], [2],[3],[4] and @AccountType and @Total .
Transact SQL :: Generate Insert With Column List And Select With Columnlist Statements
Oct 22, 2015I had to enable identity_insert on a bunch of tables and I have already done that. Now I need to modify my insert into select * from statements to include column list names along with identity columns for select as well as insert statements. The DDL is same but they are both different databases.There are almost 100 tables that it needs to be modified. Is there a way we can generate scripts for insert and select for each individual table along with their column lists including the identity column?
View 7 Replies View RelatedTransact SQL :: Using Bulk Insert - Invalid Column Number In Format File Error
Jun 5, 2015I try to import data with bulk insert. Here is my table:
CREATE TABLE [data].[example](
col1 [varchar](10) NOT NULL,
col2 [datetime] NOT NULL,
col3 [date] NOT NULL,
col4 [varchar](6) NOT NULL,
col5 [varchar](3) NOT NULL,
[Code] ....
My format file:
10.0
7
1 SQLCHAR 0 10 "@|@" 2 Col2 ""
1 SQLCHAR 0 10 "@|@" 3 Col3 ""
2 SQLCHAR 0 6 "@|@" 4 Col4 Latin1_General_CI_AS
[Code] .....
The first column should store double (in col2 and col3) in my table
My file:
Col1,Col2,Col3,Col4,Col5,Col6,Col7
2015-04-30@|@MDDS@|@ADP@|@EUR@|@185.630624@|@2015-04-30@|@MDDS
2015-04-30@|@MDDS@|@AED@|@EUR@|@4.107276@|@2015-04-30@|@MDDS
My command:
bulk insert data.example
from 'R:epoolexample.csv'
WITH(FORMATFILE = 'R:cfgexample.fmt' , FIRSTROW = 2)
Get error:
Msg 4823, Level 16, State 1, Line 2
Cannot bulk load. Invalid column number in the format file "R:cfgexample.fmt".
I changed some things as:
used ";" and "," as column delimiter
changed file type from UNIX to DOS and adjusted the format file with "
" for row delimiter
Removed this line from format file
1 SQLCHAR 0 10 "@|@" 2 Col2 ""
Nothing works ....
SELECT COUNT (*) FROM Dbo.myTable WHERE MyName ='Bill'
Aug 25, 2006Hi.Am struggling when trying to convert an old CMS from ASP 3 to ASP.NET 2.0How can I use a SELECT COUNT (*) statement as described in the heading using SQL connection to a MS SQL Server 2005What I want to do is to return the occurencies of a name in a table field programatically for further processing.So...when I have discovered that I had one or more occurencies, I will create a new query to get other data from the table.Would appreciate an answer fast as I can't seem to find info in the documentation on MSDN (hard to find a tree in the forest)
View 3 Replies View RelatedSelect * From Mytable For Xml Raw - Can't Send To Sql Server Destination
Jul 17, 2006Good evening,
I want to use ssis to export data from relational tables in sql server 2005 and import them into an xml column in sql server 2005.
Any suggestions for the best way to do this.
I created an datareader source using adventure works with the sql command "SELECT * FROM purchasing.vendor FOR XML RAW"
I then created a sql server destination with and mapped the output from above to an xml column.
I get the following error
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [596]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "XML parsing: line 1, character 2033, unexpected end of input".
Is there a better way to attack this? I'd prefer not to need to send to the file system, etc.
Thanks,
Alan
Invalid Object Name MyTable Error For A StoredProcedure OleDbCommand
Oct 18, 2007 What does Invalid object name "MyTable" mean?
I checked the table and column names. They are both correct.
Will the error mean something else, e.g. wrong data type, or no data?
TIA,Jeffrey
Dim strConn As String = ConfigurationManager.ConnectionStrings("MyConnectString").ConnectionStringDim oConn As New OleDbConnection(strConn)Dim oDBCommand As New OleDbCommand("MyStoredProceduret", oConn)oDBCommand.CommandType = CommandType.StoredProcedureoDBCommand.Connection.Open()Dim rtnValue As String = oDBCommand.ExecuteScalar() This is the error source file
This is the SPCREATE PROCEDURE MyStoredProcedure ASSELECT SettingsReqSchdTimeout FROM SettingsGO
A Performance Question: SELECT ID As SubID FROM MyTable AS MyTable1
Sep 13, 2005For some reasons I need to access the same field of the same table twice in a query, and each give out a diferrent valueLike this:"SELECT myTable.id, myTable1.id as subID FROM myTable INNER JOIN ... INNER JOIN myTable as myTable1 ..."The question is, when I write it as myTable as myTable1 will it affect the query performance if myTable is a large table? will it create another so big copy of myTable? or I should create a view like "CREATE VIEW myTable1 AS SELECT id FROM myTable" to reduce the side of myTable1?Thank you.
View 1 Replies View RelatedTransact SQL :: Calculate DateTime Column By Merging Values From Date Column And Only Time Part Of DateTime Column?
Aug 3, 2015How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedTransact SQL :: SUM Of Two Table Column Base On Another Column Value And SUBTRACT And Join Tables
Oct 14, 2015I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
Transact SQL :: Find Unique Rows In Column That Are Associated With Another Field In Another Column?
May 1, 2015I am having issues trying to write a query that would provide me the unique GUID numbers associated with a distinct PID if the unique GUID's > 1. To summarize, I need a query that just shows which PID's have more than one unique GUID. A PID could have multiple GUID's that are the same, I'm looking for the PID's that have multiple GUID's that are different/unique.
Table1
GUID PID
GUID1 PID1
GUID1 PID1
GUID1 PID1
GUID2 PID1
GUID3 PID2
GUID3 PID2
GUID3 PID2
The result of the query would only have PID1 because it has two unique GUID's. PID2 would not be listed has it has the same GUID3 in each row.
Result:
PID1
Transact SQL :: Column Length Restriction When Naming CTE Column?
Jun 22, 2015My CTE is failing and I don't know why...Is there a Common Table Expression column name length restriction???
View 2 Replies View RelatedTransact SQL :: Distinct By One Column By Selecting Multiple Column?
Jul 17, 2015I have a SQL Query issue you can find in SQL Fiddle
SQL FIDDLE for Demo
My query was like this
For Insert
Insert into Employee values('aa', 'T', 'qqq')
Insert into Employee values('aa' , 'F' , 'qqq')
Insert into Employee values('bb', 'F' , 'eee')
Insert into Employee values('cc' , 'T' , 'rrr')
Insert into Employee values('cc' , 'pp' , 'aaa')
Insert into Employee values('cc' , 'Zz' , 'bab')
Insert into Employee values('cc' , 'ZZ' , 'bac')
For select
select col1,MAX(col2) as Col2,Max(Col3) as Col3
from Employee
group by Col1
I supposed to get last row as
cc Zz bab
Instead I am getting
cc Zz rrr
which is wrong
Transact SQL :: Returning A Column Value Based Upon The Precedence Value Of Another Column?
Nov 4, 2015#EMAIL_ADDRESSES which hold records similar to the following (CREATE code below):
View 6 Replies View RelatedTransact SQL :: Get Table And Column Name In Separate Column Using PIVOT
Jul 16, 2015Is there a way we can get Table and Column name in separate column using PIVOT or something?Right now what i have is:
Text QueryPlan Plan_handle
Name Value
select id,name,Address from person <showPlznXML... 010101 Table Person
select id,name,Address from person <showPlznXML... 010101 column id
select id,name,Address from person <showPlznXML... 010101 Table Person
[code]....
Transact SQL :: Calculate SUM Of 100 Of EDSUM Column For EDCOST Column
Aug 18, 2015How I can calculate the 'SUM of 100' of EDSUM column for EDCOST column. Every EDCOST should have sum of 100 on the calculation of EDSUM. I just want to know which is the EDCOST which has <>sum of 100.
Create table #sum (ED numeric, EDCOST numeric, EDName char(6), EDSum numeric, EDCode char(2))
Insert into #sum values (121, 2000,'HLMO',98,'DT')
Insert into #sum values (122, 2000,'HLMT',2,'DT')
Insert into #sum values (123, 2001,'HLMO',100,'DT')
Insert into #sum values (124, 2002,'HLMD',97,'DT')
[Code] ...
Expeced Output:
ED EDCOST EDName EDSum EDCode
126 2003 HLMR 98 DT
130 2005 HLMR 98 DT
Transact SQL :: Calculate Third Column Using Second Column And Variable
Nov 23, 2015create table #t
(
id int,
col1 decimal(18,2)
)
go
[Code] ...
-- I want to subtract @X and col1. But my variable @X must be reduced for each value in col1 for each next row until it reaches zero.
-- OUTPUT:
-- id col1 col2
--@X at starting point is 15000
-- 1 5000.00 0 --@X IS 10000 = 15000 - 5000(col1)
-- 2 1000.00 0 --@X IS 9000 = 10000 - 1000
-- 3 10000.00 1000.00 --@X IS 1000 = 9000 - 10000
-- 4 12000.00 12000.00
-- 5 300.00 300.00
-- 6 35000.00 35000.00
--in col2 i just put zero where col1 is substract from @X and continue for every subsequent order.
-- in 3 row value is 1000 becouse @X is that big (1000 left from col1)
Transact SQL :: Select Row With Max (column Value) Group By Another Column
May 19, 2015i dont't know how to select row with max column value group by another column. I have T-SQL
CREATE PROC GET_USER AS
BEGIN
SELECT T.USER_ID ,MAX(T.START_DATE) AS [Max First Start Date] ,
MAX(T.[Second Start Date]) AS [Max Second Start Date],
T.PC_GRADE,T.FULL_NAME,T.COST_CENTER,T.TYPE_PERSON_NAME,T.TRANSACTION_NAME,T.DEPARTMENT_NAME ,T.BU_NAME,T.BRANCH_NAME,T.POSITION_NAME
FROM (
[code]....
Transact SQL :: Add Spaces To First Column So That Second Column Will Be Aligned
Sep 14, 2015I want to add spaces (like space - len(col)) to first column so that second column will be aligned when exported to email (text).
DECLARE @ColumnSpaces TABLE (
Col_1 VARCHAR(50),
Col_2 VARCHAR(50)
)
INSERT INTO @ColumnSpaces VALUES ('AAA', '123')
INSERT INTO @ColumnSpaces VALUES ('AAAAAAAAAAAAAAA', '123')
Transact SQL :: XML Column Data Into Separate Column
Nov 18, 2015I have a column with the data as below :-
<Items>
<Item Value="Value1" />
<Item Value="Value2" />
<Items>
How to get this data into seperate columns as
Items
value1
value2
Transact SQL :: Script One Column To Multiple Column?
Sep 29, 2015I have below dataset and i want to convert as per my requirement.
Dataset:
In the above dataset, if i take 9/5/2015 then i should get like below,
OPENROWSET (INSERT) Insert Error: Column Name Or Number Of Supplied Values Does Not Match Table Definition.
Mar 24, 2008Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset.
I have teh following code but it works fien when column names are given ahead of time.
If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match.
Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition.
here is my code...
SET @sql1='select * from table1'SET @sql2='select * from table2'
IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn
-- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn
exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
Cannot Insert The Value NULL Into Column SnapshotDataID, Table ReportServerTempDB.dbo.SessionData; Column Does Not Allow Nul
May 3, 2007I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies View RelatedError Number For Duplicate Column Value During An Insert For A Unique Column ?
Jul 27, 2007I have a table in which a non-primary key column has a unique index on it.
If I am inserting a record into this table with a duplicate column value for the indexed column, then what will be the error number of the error in above scenario? OR How could I find this out?
SQL Server 2012 :: Format Value Of A Column And Insert It Into Another Column Of The Same Table?
Sep 18, 2014A column of a table has values in the format - 35106;#Grandbouche-Cropp, Amy.
I need to format the column data in such a way that only the text after # (Grandbouche-Cropp, Amy) remain in the column.
The text before ;# (35106) should be inserted in to another column of the same table.
Below is the table structure:
create table [HR_DEV_DM].[CFQ_TEST].sp_CFQ_Commercial_Referrals
(
ID int identity,
PromotionalCode nvarchar(4000),
QuoteNumber nvarchar(100),
CreatedBy nvarchar(100),
Created datetime,
ModifiedBy nvarchar(100),
Modified datetime,
CreatedBy_SalesRepSharePointID int,
ModifiedBy_ModBySharePointID int
)
Insert Data Into A Destination Column Which Doesnt Have An Input Column
Feb 27, 2008Hi, I was wondering how I can complete a column (which doesnt have an input one) with data.
For example:
I have a sql query which bring data of 3 columns
ID | FISRT NAME | LAST NAME
1 MIKE MORGAN
2 SARA JOHANES
So, I will insert that data in a FLAT FILE CONNECTION MANAGER, which I configured with 3 columns and I did the corresponding mapping in the FLAT FILE DESTINTATION.
Now, If I add one more column in the FLAT FILE CONNECTION MANAGER, I will not have it mapped to a input one, obviously. So, what I need is to add one more column to the flat file destination and complete it with zeros values in it.
Probably I can solve this part by introducing a DERIVED COLUMN and there I can configure the zeros that I want to add to the column. But I'm not sure if I can do that without having a input column.
So, the question will be, how can I add one column to a flat file which doesnt have a input and introduce any value that I want to it?
Hope I was clear
Thanks for your help.
Beli
Insert Column Concatenated For Each Column In Another Table
Jun 13, 2012I have a table where one column is an id card number (col1) and another is another column (col2). In col2 I have various values for each col1 ie col1 can have various values of col2. How can i insert col1 concatenated for each col1 in another table?
View 2 Replies View RelatedHow To Create A New Column And Insert Values Into The New Column
Mar 3, 2008Can anyone assist me with a script that adds a new column to a table then inserts new values into the new column based on the Table below. i have included an explanation of what the script should do.
Column from
Parts Table Column from
MiniParts New Column in
(Table 1 ) (Table 2 ) MiniParts (Table2)
PartsNum
MiniPartsCL
NewMiniPartsCL
1
K
DK
1
K
K
1
Q
Q
0
L
L
0
L
LC
0
D
G
0
S
S
I have 2 tables in a database. Table 1 is Parts and Table 2 is MiniParts. I need a script that adds a new column in the MiniParts table. and then populate the new column (NewMinipartsCL) based on Values that exist in the PartsNum column in the Parts Table, and MiniPartsCL column in the MiniParts columns.
The new column is NewMiniPartsCL. The table above shows the values that the new column (NewMiniPartsCL) should contain.
For Example
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "DK" ( as shown in the table above).
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "K" ( as shown in the table above). etc..