There is a column named Timings in HH:MM:SS format. Datatype of this column is varchar(50).
I want to sum the rows in this column and get the output as one single record.
00:01:06
00:01:16
00:01:04
00:01:24
00:01:13
00:01:06
00:02:21
00:01:16
I have a column in table which stores the actual signature from the singature pad. In the table it is stored as varchar(max) datatype and sample data looks like below. Below data is the actual signature of the person.
CREATE
TABLE #test
([Signature]
VARCHAR(MAX))
[code]...
How do i decrypt this data so i can print actual signature on my report.
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error:
[OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
I have a table with number and varchar columns. The last insert statement has 1 inserted.
The select statement should retrieve
a b
1 1
CREATE TABLE [dbo].[test1](
[a] [int] NULL,
[b] [varchar](10) NULL
) ON [PRIMARY]
insert into test1 values (1,'a')
insert into test1 values (2,'b')
insert into test1 values (4,'d')
insert into test1 values (12,'x')
insert into test1 values (15,NULL)
insert into test1 values (1,1)
I created a procedure called 'Longtextprocedure'. The length of this procedure is 650000 characters long. When I was giving the following query - select len(routine_definition) from INFORMATION_SCHEMA.routines where ROUTINE_NAME = 'Longextprocedure'; Length is showing as '4000' characters long. It is not showing the remaining part of the procedure, it is showing upto the 4000 characters of procedure code. But when you execute the procedure(exec 'Longtextprocedure') it is showing the exact result.
My question is i want to read all the 650000 characters long procedure code{select routine_definition from INFORMATION_SCHEMA.routines where ROUTINE_NAME = 'Longextprocedure'} to a variable which is varchar(max).
When i am trying to read the whole procedure code it is taking 4000 characters of data into the variable not the whole. Is there a way to read the huge procedure code into the variable?
Code:-
CREATE PROCEDURE FAKEPROCEDURE @procName VARCHAR(50) --@procName is 'Longtextprocedure'
AS
BEGIN
DECLARE @routineDefinition VARCHAR(MAX);
DECLARE @replaceToChar VARCHAR(MAX);
[Code] ....
When i am trying to execute the line EXEC(@dupliacteRouteDef), it is showing like there is no procedure defined. This is due to '@dupliacteRouteDef' variable is having 4000 characters of data not the whole data. Is there a way to read whole procedure data into the variable irrespective of the length of the string?
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1
WHEN NULLIF(Surname, '') IS NULL THEN 2
WHEN NULLIF(Forename, '') IS NULL THEN 3
WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4
WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
1 = NHS
2= SUR
3=FOR
4=DOB
5=ADD
6=PCO
7=GPN
8=PCZ
9=GPD
10=CCG
Below is garbage data and structure (I think enough to get point across). How can I perform calculations needed?
Create Table #1234
(
abcd decimal(16,4)
,defg decimal(16,4)
,hijk decimal(16,4)
,logon datetime
,logoff datetime
[code]....
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.
With Disk_Space (ResourceID, ComputerName, Description, DiskName, VolumeName, FileSystem, Size, FreeSpace)AS
(
SELECT distinct
SYS.ResourceID,
SYS.Name,
LDISK.Description0,
LDISK.DeviceID0,
LDISK.VolumeName0,
LDISK.FileSystem0,
[code]...
However when i run this query, i get an error :
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB
ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014
I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."
Convert (varchar(10), "StartDate", 110)+1 as Next Day
I am getting this error when I run the case statement below. I think I have to convert at some point, but not sure where or how.
Case when m.dispo = 2 then 'Inactive' else m.value end 'Score'
So my data is delivered as numeric(9,2)...like 100.00. I have to extract that data and store it as a varchar 0 filled without the decimal place...like 0000010000///I tried the following and it did not work...
RIGHT('000000000'+CONVERT(VARCHAR,[EODPosting].[Amount]),10),
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedIn my inner query,
I have a column "Cost" (data type=varchar) and another column "Qty" (data type=int)
Now in outer query, I need to multiply this 2 columns Cost*Qty.But after trying some cast operation still getting "Error converting data type varchar to numeric."
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*),
CASE
WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)'
WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)'
WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)'
ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
Cannot use dynamic sql in current context. So need some help regarding this.I am developing a stored procedure to update a table. Sending Column names as parameters, but not able to use them as given below.INSERT INTO Books (@Column1, @Column2) values.. Any way to execute without using dynamic sql?..Thanx.
View 1 Replies View RelatedHi,
This is my complete trigger.
ALTER TRIGGER DeleteTriggerC_Middleware_Exception ON dbo.C_Middleware_Exception AFTER DELETE AS
BEGIN
DECLARE @RowCount AS VARCHAR
SET @RowCount = @@ROWCOUNT
DECLARE @TableName_Deleted AS VARCHAR(50)
DECLARE @ErrorMsg_Deleted AS VARCHAR(255)
DECLARE @AddlErrMsg_Deleted AS VARCHAR(255)
DECLARE @SubjectArea_Deleted AS VARCHAR(25)
DECLARE @CHKPT_Deleted AS VARCHAR(10)
SELECT @TableName_Deleted = table_name , @ErrorMsg_Deleted = cast(error_msg AS varchar(255)) , @AddlErrMsg_Deleted = cast(addl_error_msg AS varchar(255)),
@SubjectArea_Deleted = cast(SUBJECT_AREA AS varchar(25)), @CHKPT_Deleted = cast(CHKPT AS varchar(255))FROM DELETED
--where subject_area = 'inventory'
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE Table_Name = @TableName_Deleted
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area IS NULL and ChkPoint IS NULL
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @AddlErrMsg_Deleted like Addl_Error_Msg
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area = @SubjectArea_Deleted and ChkPoint = @CHKPT_Deleted
END
END
when i am executing the follwing query i am gettin systax error.
Query :delete from dbo.c_middleware_exception where subject_area = 'eap_room'
Error :
Server: Msg 245, Level 16, State 1, Procedure DeleteTriggerC_Middleware_Exception, Line 17
Syntax error converting the varchar value '*' to a column of data type int.
what could be the solution.
Thanks in advance
yvnsmca
I have a table with column "Data" as VARCHAR, with entries like below.
1
11
2
A1
A10
A11
246
AB1
AB10
100
256
B1
B2
124
20
B21
B31
32
68
I want to select the data by converting varchar to int for numeric values and for alphanumeric it should display as it is.
SELECT CAST(dataAS INT) FROM record_tab
getting below error
Conversion failed when converting the varchar value 'A1'
I have an inventory database that Im trying to create a report out ofthe IP address are a lookup on a seperat table but I keep getting theabove error can I change the table row to something to fix this orwhat.SELECT i.INVENTORY_ITEM_ID AS [IP Address],i.HOST_NAME AS [ServerName], '' AS Flag, i.MEMO AS Comments, 'Seattle' AS City, 'Washington'AS State,CASE WHEN fv.value = 'EL EET1410' THEN '1111 3rdAve.' WHEN fv.value = 'EL WFL17' THEN '999 3rd Ave.' ELSE '' END AS[Address 1],' ' AS [Address 2], CASE WHEN fv.value = 'ELEET1410' THEN '1111' WHEN fv.value = 'EL WFL17' THEN '2222' ELSE ''END AS [Building ID],fv.VALUE AS Building, '98101' AS Zip,CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Computing FacilityLevel],CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Bldg Floor],CASE WHEN fv.value = 'EL EET1410' THEN 'C028'WHEN fv.value = 'EL WFL17' THEN 'C123' ELSE '' END AS WSPID,i.LOCATION_IN_FACILITY AS Location,i.SERIAL_NUMBER AS [Serial Number], i.ASSET_TAG AS [Asset Tag], ' ' AS[Second Asset Tag(s)],vv.VALUE AS Manufacture, mv.VALUE AS Model,'Yes' AS [Rack Mountable], rv.VALUE AS [Rack Units], 'DEV' AS [ServerEnviroment],lv.VALUE AS [Sever Type], ov.VALUE AS OS,CASE WHEN lv.value = 'Server - Intel Blade' THEN'Windows' WHEN lv.value = 'Server - Intel' THEN 'Windows' WHENlv.value = 'Server - Unix' THEN 'Unix'ELSE '' END AS [OS Type], '19x28' AS Footprint,ev.VALUE AS [Technical Owner of Server], 'N/A' AS [SLA Category],i.ON_BOARD_NIC_PORT_COUNT AS [NW Connectionquantity], 'Devlopment/Test Machine' AS [Application(s) Name],ev.VALUE AS [PW Contact],'N/A' AS RTO, 'N/A' AS RPO, 'No' AS [Is BoxClustered?], 'N/A' AS [Buisness Critical],CASE WHEN mv.value = 'Proliant DL580G1' THEN'90lbs' WHEN mv.value = 'Proliant DL360G2' THEN '85lbs' WHEN mv.value= 'Enterprise 220R' THEN'45lbs' ELSE '' END AS Weight,i.LAST_MODIFIED_DATE AS [Date of Last Install], 'No' AS [DedicatedCircuit]FROM dbo.INVENTORY_ITEM i LEFT OUTER JOINdbo.IP_TO_INVENTORY pv ON pv.IP_ADDRESS = i.INVENTORY_ITEM_IDLEFT OUTER JOINdbo.LOOKUP_VALUE lv ON lv.LOOKUP_VALUE_ID =i.DEVICE_TYPE_ID LEFT OUTER JOINdbo.LOOKUP_VALUE fv ON fv.LOOKUP_VALUE_ID =i.FACILITY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE vv ON vv.LOOKUP_VALUE_ID =i.VENDOR_ID LEFT OUTER JOINdbo.LOOKUP_VALUE mv ON mv.LOOKUP_VALUE_ID =i.MODEL_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ov ON ov.LOOKUP_VALUE_ID =i.SOFTWARE_VERSION_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ev ON ev.LOOKUP_VALUE_ID =i.CHECKED_OUT_BY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE rv ON rv.LOOKUP_VALUE_ID =i.U_HEIGHT_ID
View 2 Replies View RelatedI am unable to get FTS working where the column to be searched is type varchar(MAX) or Text. I can get this to work if my column to be indexed is some statically assigned array size such as varchar(1000).
For instance this works, and will return all applicable results.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](1000) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
And this does not. It returns zero results what so ever.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](MAX) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
Could someone please tell me what I need to do to enable FTS on varchar(MAX) or Text columns?
SQL server 2000
Note : GRP_ID integer
declare @SchDnGRP VARCHAR(50)
SET @SchDnGRP='29,30'
SELECT USR_ID_ARY from AD_USR_GRP Where GRP_ID in(@SchDnGRP)
i got error like
Syntax error converting the varchar value '29,30' to a column of data type int.
if need any sql server Configuration requie, please advice to me
I have a table(tab1) with a column(col1) of type varchar. I insert a row with an integer value(1). And when i query the table using the sql, select col1 from tab1 where col1 = 1, it works fine.
But after i insert a varchar, say 'a' and then do the same query, i get an error message saying, "Syntax error converting the varchar value 'a' to a column of data type int.". Why is this so? Please reply.
Well I am doing a simple insert through a stored procedure..., but I am getting this error. In my table I have the UserID as a VARCHAR 100. I am storing from a textbox that will have number because its there email. But I am not converting anything. Do I need to convert in this scenario??
Server Error in '/pickem' Application.
Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int.Source Error:
Line 113:
Line 114: dbConnection.Open
Line 115: Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Line 116:
Line 117: Dim rowsAffected As Integer = 0
Here is the code: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(ConfigurationSettings.AppSettings("connString"))
Dim myCommand as New SqlCommand("prcAddTeam", dbConnection) myCommand.CommandType = CommandType.StoredProcedure
myCommand.Parameters.Add("@UserID", SqlDbType.Varchar, 100).Value = TRIM(emailBox.Text) myCommand.Parameters.Add("@TeamName", SqlDbType.Varchar, 40).Value = TRIM(teamBox.Text) myCommand.Parameters.Add("@Address1", SqlDbType.Varchar, 50).Value = TRIM(addressBox.Text) myCommand.Parameters.Add("@Address2", SqlDbType.Varchar, 50).Value = TRIM(address2Box.Text) myCommand.Parameters.Add("@City", SqlDbType.Varchar, 50).Value = TRIM(cityBox.Text) myCommand.Parameters.Add("@State", SqlDbType.Varchar, 30).Value = stateList1.SelectedItem.Value myCommand.Parameters.Add("@Zip", SqlDbType.Varchar, 11).Value = TRIM(zipBox.Text) myCommand.Parameters.Add("@FirstName", SqlDbType.Varchar, 50).Value = TRIM(firstNameBox.Text) myCommand.Parameters.Add("@LastName", SqlDbType.Varchar, 50).Value = TRIM(lastnameBox.Text)
dbConnection.Open Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Dim rowsAffected As Integer = 0
dbConnection.OpenStored procedure:CREATE PROCEDURE prcAddTeam @UserID VARCHAR(100) ,@TeamName VARCHAR(40) ,@Address1 VARCHAR(50) ,@Address2 VARCHAR(50) ,@City VARCHAR(50) ,@State VARCHAR(30) ,@Zip VARCHAR(11) ,@FirstName VARCHAR(50) ,@LastName VARCHAR(50) ASSET NOCOUNT ONDECLARE @ID INTSET @ID = 0SELECT @ID = ISNULL((SELECT UserID from tblUserInfo where UserID = @UserID),0)IF @ID = 0 BEGIN INSERT INTO tblUserInfo (UserID,TeamName,Address1,Address2,City,State,Zip,FirstName,LastName,CreateDate) VALUES(@UserID,@TeamName,@Address1,@Address2,@City,@State,@Zip,@FirstName,@LastName,GetDate()) SET @ID = @@IDENTITY END
Hi,
I have a excel file which i want to import the data to sql server... The sql server Data type for that particular column is
varchar and it has a contraint too like the data should be in this fashion 00000-0000 or 00000...
but when i try to import the data from the excel to sql server... 08545 just becomes 8545 (cause excel is treating it as a float) and so my insert fails...
what can i do to rectify the problem...
regards
Karen
I have a column with the data as below :-
<Items>
<Item Value="Value1" />
<Item Value="Value2" />
<Items>
How to get this data into seperate columns as
Items
value1
value2
this data. need help
Sort following numbers by asc and desc order
Before query sort
-1.1
-8.8
-15.5
0.0
+0.5
+0.2
Sort asc
+0.5
+0.2
0.0
-1.1
-8.8
Sort Desc
-8.8
-1.1
0.0
+0.2
+0.5
I am studying indexes and keys. I have a table that has a fixed width of data to be loaded in the first column which is parsed in a view based on data types within the fixed width specifications.
Example column A:
(name phone house cost of house,zipcodecountystatecountry)
-a view will later split this large varchar string based
column b: is the source filename of the data load (varchar 256)
....
a. would there be a benefit of adding a clustered or nonclustered index (if so which/point in direction on why)
b. is there benefit of making one of these two columns a primary key (millions of records) or for adding a 3rd new column as a pk?
c. view: this parses the data in column a so it ends up looking more like "name phone house cost of house zipcode county state country" each having their own column.
-any pros/cons of adding indexes (if so which) to the view instead of the tables or both for once the data is parsed?
I'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
I am trying to create a whole number DAX calculated column that is derived from a date column. Basically it gets the date from the source data column and outputs it as an integer in the YYYYMMDD format.So 01/OCT/2015 would become --> 20151001...I've been fidgeting with DAX but my problem is that I keep missing the leading zeroes for months and days. So 01/March/2015 becomes 201531 which is not what I want (I need 20150301 in this case).
View 2 Replies View RelatedI have a simple table data i want want to show row data in to column data.
SELECT clblcode,mlblmsg
FROM warninglabels
My expected result will be
0001 0002 0003 0004
------- ------- -------- --------
May Cause.... Important..... Take madi........... Do Not Take.......
I found string from net how to split column data to row
SELECT A.JbIDFull, A.ProdID, A.OrderQty, A.OtherDetails, A.OrderDate, c.Item FROM
(SELECT JbIDFull, DeptID, ProdID, OrderQty, OtherDetails, OrderDate, LamORSteachType, JBID, RMIDs, RMQty
FROM tblJobCardforProduction WHERE JBID = '2' AND DeptID = '3') A
CROSS APPLY dbo.SplitStringNEW(a.RMIDs,';') b
CROSS APPLY dbo.SplitStringNEW(a.RMQty,'/') c
When I apply one cross apply it's working fine but when i apply for one more column is replacing three time one row, this data i want to split RMIDs and RMQty with same JbIDFull
JbIDFull DeptID ProdID OrderQty RMIDs RMQty
PD-May15-00001 3 2044 10000 PROD-00052 0
PD-May15-00002 3 921 1000 PROD-00052;PROD-00383;PROD-00384 500;600;700
how to split a single column into multiple columns with | delimited. For example I have column old_values in this I have a data with | delimited and I need to split this data into multiple columns.
Old_values
xxx|yyy|zzz|aaa|bbb|ccc|ddd
into
A B C D E F G
xxx yyy zzz aaa bbb ccc ddd
I am having two table i.e( tbl_oldEmployee , tbl_NewEmployee ),which is having Column name Employee Name and City same in both table but inside column data is different in different table.but i want to view the Employee name and City from tbl_NewEmployee to tbl_oldEmployee which is having EmployeeId common with tbl_oldEmployee extra record also required (i.e tbl_NewEmployee having 6 record and tbl_oldEmployee having 10 record,so i need to display data from tbl_oldEmployee but first 6 record which id match with tbl_NewEmployee id should be replaced and extra data from tbl_oldEmployee also display).
View 3 Replies View RelatedIs there a way to encrypt 'varbinary' column data?
View 9 Replies View Related