Transact SQL :: How To Calculate Size Of Files That Have UNC Paths For
Mar 27, 2014
I am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria? I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!?
I have a client with no backup of MASTERdb or Help_rev_devices, all I have is a couple of .dmp's of the production data. In order to run DISK REINIT I need to know the size of the database, is there any way of finding out the size of the database device, if all you have to go with is a backup dump file?
I am trying to trace few events using profiler Via T SQL like below, the below scripts works fine, but once the file reaches 1GB , it is not rolling over to another file and start trace again.I tried using URL...once it reaches max file size provided between the time interval..
declare @rc int declare @TraceID int declare @maxfilesize bigint declare @DateTime datetime set @DateTime = '2015-08-18 16:00:00.000'------Stop Time 4 PM set @maxfilesize = 1024 --1GB max File size
I am trying to set up a TEST ENIVORNMENT for a reservation software package. I need this setup so that I can run various scheduling scenarios in order to optimize operations. Below I have been given instructions from the software vendor on how to set up my SQL database. However, I am a little confused on what to do for a couple of the steps. They are as follows:
***In SQL server 2000 enterprise manager on the test laptop, change the 2 path settings in the table SGCONFIG. The should be changed to C:StratagenAdept5Server. ** YOU WILL NEED TO DO THIS STEP EVERYTIME YOU RESTORE A BACKUP ADEPT5_CLASTRAN.BAK FROM THE PRODUCTION TO THE TEST ENVIRONMENT
QUESTION: How do you change the path settings on a table?
***Open the .udl files in the apps folder and the server apps folder and check to see that they are pointing to the test laptop server, not the production server.
QUESTION: What are the .udl files and how do you check to see if they are pointing at the test laptop server only?
Thanks sincerely for your help. I am trying to meet a deadline for a meeting tomorrow. Therefore, I am desperate. Please send me email. rtanner@clastran.com.
I am trying to set up a TEST ENIVORNMENT for a reservation software package. I need this setup so that I can run various scheduling scenarios in order to optimize operations. Below I have been given instructions from the software vendor on how to set up my SQL database. However, I am a little confused on what to do for a couple of the steps. They are as follows:
***In SQL server 2000 enterprise manager on the test laptop, change the 2 path settings in the table SGCONFIG. The should be changed to C:StratagenAdept5Server. ** YOU WILL NEED TO DO THIS STEP EVERYTIME YOU RESTORE A BACKUP ADEPT5_CLASTRAN.BAK FROM THE PRODUCTION TO THE TEST ENVIRONMENT
QUESTION: How do you change the path settings on a table?
***Open the .udl files in the apps folder and the server apps folder and check to see that they are pointing to the test laptop server, not the production server.
QUESTION: What are the .udl files and how do you check to see if they are pointing at the test laptop server only?
Thanks sincerely for your help. I am trying to meet a deadline for a meeting tomorrow. Therefore, I am desperate. Please send me email. rtanner@clastran.com.
How can I calculate the combined table size for the following: The Destination and the ShipmentWages tables on a database of a courier service have approximately 10,000 rows and 15,000 rows, respectively. The average row size of the Destination table is 4KB and that of the ShipmentWages table is 3KB.
INSERT INTO [Table] SELECT '100','1','DD',1000000,'999999000', '2008-01-29','sa','F','2008-01-29','PARTIAL DATA','11502', '101','2008-01-29','ABC1111111','T','2008-01-29','S','11204'
EXECUTE sp_spaceused 'Table'
name | rows |reserved | data |index_size | unused [Table] | 1 |16KB | 8KB | 8KB | 0KB
i couldnot understand i) how the system calculate this 16 KB and 8 KB ? ii) if i changed the VARCHAR(255) to VARCHAR(50) ,will there be difference in size of the table ,if so then how ? iii) how can i see the change in size of table by reducing the size of datatype ?
I want to calculate average row size of a record. By based on this i want to add some more columns into an existing table. Here is my table structureCREATE TABLE patient_procedure( proc_id int IDENTITY(1,1) CONSTRAINT proc_id_pri_key PRIMARY KEY, patient_id int NULL, surgeon_name varchar(40) NOT NULL, proc_name varchar(20) , part_name varchar(30), wth_contrast int , wthout_contrast int , wth_wthout_contrast int, xray_part varchar(60), arth_area varchar(30), others varchar(30) , cpt varchar(20) , procedure_date smalldatetime NOT NULL, mraloperrun varchar(20),CONSTRAINT patientid_foreign_key FOREIGN KEY(patient_id) REFERENCES dbo.patient_information (Patient_id)) Now i got a requirement that i have to add two more procedures with different columns.The columns overall size is 195 bytes.I can place those two procedures as seperate tables. I dont want to do that becuase of front end requirements.Here the problem is when the user enters these two procedures information remaining fields will store the null value. I know that when we store the null values into corresponding columns min of 1 byte will be occupied. Please suggest me that shall i include these columns into the above table. If i add these columns is performance will be decreased or not. Waiting for valuable suggestions.
Hi all, please show me the way how to calculate the size of a database in SQL 2000. Whith this size we have already calculated, how much space need to make a backup file for this database.
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file. if it is not there then i have to send mail to client saying that file is not valid.
Let me know how i will do it.I need to also calculate the size of flat file.
I receive Error: 3967, Severity: 17, State: 1. Insufficient space in tempdb to hold row versions. We have 8 data files for temp db of 10210 GB size and given 10240 GB as max size.
As MS suggest to calculate the temp db file size and growth rate we need to monitor the perform counters Free Space in Tempdb (KB) and Version Store Size (KB) in the Transactions object.
basic formula: [Size of Version Store] = 2 * [Version store data generated per minute] * [Longest running time (minutes) of your transaction
My report disk utilizations says tempdb is full ? I thonk I need a shrink for the file .
Still I am confused in calculating the size , My perform counter gives me data as such
Free Space in tempdb (KB) 279938496 Version Generation rate (KB/s) 53681040 Version Cleanup rate (KB/s) 53422320 Version Store Size (KB) 258720 Version Store unit count 22 Version Store unit creation 774 Version Store unit truncation 752
Need calculating the count of events on each day. I have an event log table as shown below.
DECLARE @EventLog TABLE ( event_id int, status_id varchar(20) , dttm datetime ) INSERT INTO @EventLog SELECT '100','Inplace','01/05/2015 05:00' UNION ALL SELECT '100','Removed','03/05/2015 10:00' UNION ALL SELECT '100','Inplace','05/05/2015 10:41' UNION ALL
[Code] ....
I need an output to look like on each day how many events were in place.
E.g.: for the month on May , Event_id 100 was inplace on 1st and removed on 3rd , so on 1st may 2 event_ids (100, 103) hence 2 .
event_ids - 103 / 104 and inplace the whole month and not removed. so its calculated the count as 2 til towards teh end of the month.
So I need to count of all each event_id in place for each day in may.
How do I author a SQL Query which meets the following requirement: Display a ratio of (instances where status is a success)/(instances where status is a success or instance is a failure). The below syntax is incorrect. However, I hope to beter explain what I am trying to accomplish using the incorrect SQL query below.
SELECT SUM(Case When Status = "SUCCESS")/SUM( Case When Status = "FALLBACK") FROM ruleResults;
I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table
GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end and in the second Temp Table, I have select ,GrpSize=sum(grpsize) ,NoofGrp=count(distinct grpsize) From Temp1
The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.
For the second record, ItemsStatus=1 which means the item return to stock, at the time the running stock value calculation should be the previous row Running Stok value (=9 ) +(ItemQuantity*ItemUnitWeight)When the ItemStatus=2, that means the item is definitely out and will be never back to current stock. Is there a way to get that calculation field ?
I am trying to create a "Loan Ledger Card" in SSRS which does the calculation up to report extracting time. I was able to create it on Excel (Click to download the Excel file) as we can calculate amounts for each installment based on Row and Column name. You can test it by putting any amount (Here it should be below 62000 as it is the total balance of loan) in "Amount Paid" yellow cell and see the effect.
I have made a selection in SQL (attached query and result in screenshot). It calculates the total paid amount by now on the first row, and all due amounts in other rows. Basically, It should first deduct the interest from first row, then principle, same process for second row and so on until it covers the whole paid amount.
SELECT '0' As RN ,memrepay.lnr ,'Repayment' AS Type ,SYSDATETIME() AS NOW ,SUM(memrepay.mprinc) As PrincPaid ,SUM(memrepay.mint) As IntPaid
[Code] .....
How can I do the similar calculation of Excel file in "SQL query" or "SSRS custom code"?
table A-NewParts PartNumber Description LaunchDate a123 product a 4/1/2009
[code].....
I want to get end result as sales for each new product for a rolling period from Launch date as year1 sales,year2 sales...and so on which I got through case statements.I am stuck on how to get the total Sales for all products (including new products) in the same rolling period based on the different launch dates for each new product.
PartNumber Description LaunchDate Yr1 Sales Total Yr1 Sales Yr2 Sales Total Yr2 Sales a123
I have a table which has name,Speciality,start date and end date. So each person may have 1/more rows .They will have more if they change their specialities. For example if you look at the data below.
AdjusterNameSpecialtyDatestartDateEnd Test Inside Property2009-08-29 2010-07-31 Test Management2010-08-012012-07-31
If we see at the data above Test has 2 rows because he changed his specialty in the middle.My requirement is to calculate the total number of employees in each month for last 2 years in each speciality. For example if we look at the example above, Test was in Inside property from 2009 Aug to 2010 Aug but if i use just the date start and take the month for each adjuster it gives me the number of adjusters started in that year and month but what i want is Test should be counted in all the months for Inside property until 2010 07 month. Which means i want to have the total number of adjusters present by each speciality for each month of last 2 years .
How to calculate estimated completion time of a job and what is the variance/difference in time based on previous job history. Looking for tsql query which can accomplish this.For example)...Daily a job is taking 10 mins to complete. However, today due to some reason, the job is running over an hour and still running. It could be a blocking issue or some performance issue on the server due to which the job is still running.
In such cases, using a tsql query or a stored proc which monitor these jobs every 3 mins (Configurable value), so every 3 mins , query has to check, if they are any jobs which are taking more time than its usual completion time/avg completion time in that case shoot an email using dbmail functionality i.e. sp_Senddbmail .. From there, DBA can dig further using waits or sql trace etc...
I needed to create a stored procedure to lock a user who makes 3 incorect entries of his password. I did it successfully. Now the problem what i have is that i want to lock the user only if he makes the 3 incorrect entries within 30 minutes.
I created a field named "FirstEntryTime" of type datetime that saves the date of the first incorrect entry. I tried to make an if statement:
if (@timesOfEntry <=2 AND DATEDIFF(MINUTE, firstEntryTime,GETDATE()) <= 30) Begin Update myTable set ... End
Iam trying to calculate the number of working days between two dates. Iam getting the uouput as only 1 02 r working days??
select building_number as SchoolID,building_name as Campus, count( distinct( CASE WHEN(( DATEPART(dw, CurDate) + @@DATEFIRST)%7 NOT IN (0,1)) tHEN 1 ELSE 0 END)) as NumberofDaysServed from Sales sl join Buildings b on sl.Building_Num =b.Building_number join students2 s on s.Student_Number= sl.Student_Num join Sale_Items SI on si.UID = sl.UID where CONVERT(CHAR(10),CurDate,120) between '2015-05-01' and '2015-05-07' and VoidReview <> 'v' and SI.INum = '1' group by building_number,building_name order by building_number,Building_Name;
I have a table Product2 as the attachment at the bottom. Now i want to create a Column "Purchasing rate" over Product and Region like this. I tried some Code but it gave me still Error.
