Transact SQL :: How To Compare Rows With Spaces
Nov 17, 2015
I would like to compare rows from 2 tables.
For ex:
Table1
Col1Â Col2 Col3
1      a    aa
2     b    bb
Table2
Col1Â Col2 Col3
1       a   aa
2      b    bb
Notice Table2.Col2 first row has an extra space " a", where Table1.Col2 value is "a".I need to compare all the columns, not just 1 column (any of the column can be different). Do we use CHECKSUM for this, or is there a better way to compare the 2 tables (in this case resulted in Table2 row 1 col 2 being the difference ?
View 10 Replies
ADVERTISEMENT
Nov 9, 2015
We write to a log file each time a job runs. We give each job a unique batchid. I want to compare the run times of each step/record between two batch ids: '20150101888' and '20150101777'. Column Mins in the number of minutes each step ran. I am having trouble comparing the rows that have generic process and stepname – Trans Switch in this example. A new process within a batchid starts with a 'XX', 'Load'.
So I want to compare CA's Trans to CA's Tran Switch and ER's Trans Switch to ER's, etc. There can be multiple Trans Switch per process. There should be the same number between each batch, but no guarantees that something might change. Also, Trans Switch is not the record right after the new process (CA, ER) in production.
I have just made a very simplified example.
/**
Want to compare 20150101888 to 20150101777 and end up with this result set. Notice that the duplicate process/step within a process has the process (CA and ER in this example) and a sequential number added to it: 'CA Trans 1'. Need this to pull out the largest time differences.
Time difference, process, step, mins1, mins2, batchid1, batchid2
-6, CA, Load, 17, 23, 20150101888, 20150101777
0, CA Trans 1, Switch, 8, 8, 20150101888, 20150101777
-6, CA Trans 2, Switch, 9, 15, 20150101888, 20150101777
-4, ER, Load, 7, 11, 20150101888, 20150101777
-4, ER Trans 1, Switch, 7, 11, 20150101888, 20150101777
**/
[Code] ....
View 4 Replies
View Related
Jul 1, 2015
A vehicle loading confirm after that what time its gated out so i want to take the time duration between finish loading and gate out, find sample table records , i want to take more than 5 hrs difference between finish loading and gate out.
tld_tripno
tld_sno
tld_activitycode
tld_location
tld_actualdate
TLM3004242015
[Code] .....
I want to take the result like thisÂ
Tld_tripno
Finish Loading
Gate Out
Date and Time difference
TLM3004242015
2015-05-11 19:58:00
2015-05-12 08:42:00
12:44:00
View 10 Replies
View Related
May 8, 2008
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
View 1 Replies
View Related
Jul 10, 2006
I have some fields in my database that are char(50)
I use an insert to put some text into the fields (using perl)
when I look at the fields I find that spaces are used to "pad out" the text to the field size.
This didn't happen with MySQL and PHP, is there any way to disable this?
View 5 Replies
View Related
Aug 31, 2015
The table I have is:
CREATE TABLE [dbo].[FTE2015](
[Firm Number] [varchar](50) NULL,
[w9] [varchar](50) NULL
) ON [PRIMARY]
GO
select * from dbo.FTE2015
Firm Number w9
709485"" Â 0
040898A" 12.5
709502"" 2.4
041382"" 0.4
709503"" 0.3
709681"" Â 4.9
How do I remove the trailing blanks? I tried RTRIM but it does not work.
SELECT RTRIM([Firm Number])
FROM dbo.FTE2015;
(No column name)
709485""
040898A"
709502""
041382""
709503""
How can I resolve this? The [Firm Number]column is not of a fixed length.
View 11 Replies
View Related
Oct 25, 2012
I'm not sure about why I'm not able to remove spaces even after trimming them. Below is the result of query I'm usning.
select distinct LTRIM(RTRIM(Promotion_Code)) Promotion_Code
--, count(Promotion_code)
from dbo.Marketing_Promotion_Tb
where Promotion_code like '%1BTPIZZA%'
Result :
Promotion_Code  Length
1BTPIZZAÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10
1BTPIZZAÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 8
View 12 Replies
View Related
Feb 12, 2014
I got two columns DEATHDATE and STATUS
I have to update STATUS Column as INVALID when data in DEATHDATE column as follows
Example of INAVLID DEATH DATE : 1221, 12xt88,12#10, 1, ABC, #@ , etc
Do nothing when the DEATHDATE is VALID like
Examples of Valid/accepatable DEATHDATE: 09122012, 091212 ,******,********, 000000,00000000
How can i achieve this.
View 1 Replies
View Related
Nov 16, 2011
I need to compare two tables in each row. the tables are as follows:-
Table a:
Code:
IDFirst_Name Last_name Birthdate
1Shradha Deshkmukh 1981-12-25 00:00:00
2Shradha Verma 1981-05-11 00:00:00
3Divya Dutta 1982-07-21 00:00:00
4Matthew Palmer 1983-12-28 00:00:00
table d:-
Code:
idfnlndob
1ShradhaTiwari1981-12-25 00:00:00
2DivyaDutta1983-07-21 00:00:00
3SulabhManesar1975-09-11 00:00:00
4MatthewPalmer1983-12-28 00:00:00
5SamuelMaxwell1984-05-22 00:00:00
I want to compare the tables using first name, and I have a log variable which I want to have the value as per the differences in the table that is if the first name matches and second name and dob dont match it shows log value for that FN as 'LN and DOB dont match'.
similarly if First name matches and dob matches then @log is 'LN not match'.
And in case all three match it should show 'match'as log value.The query I use is a s follows:-
Code:
USE testing
GO
DECLARE @NR int
DECLARE @log varchar(200)
SELECT @NR = COUNT(*) FROM a
WHILE @NR>0
[code]...
the result I am getting is :-
Code:
fnlndob (No column name)
ShradhaTiwari1981-12-25 00:00:00match
ShradhaTiwari1981-12-25 00:00:00match
DivyaDutta1983-07-21 00:00:00match
MatthewPalmer1983-12-28 00:00:00match
I have tried using CASE but that doesnt work either.
View 3 Replies
View Related
May 22, 2008
i have two tables. 1st table gets the information from as400, then moves the data to table 2 at sql 2000 server. I need to see when as400 updateschanges or inserts new information to table 1 how to updatechange or insert into table 2?
View 4 Replies
View Related
Nov 17, 2005
Hi
i have this variable called order1 in the table called datetable and i want to display out the duplicate orders in sql. how do i do that? do i need to use group by ?
thanks in advance.! any help?
well i actually get the answers by doin this...
select order1 from datetable group by order1 having count(*) > 1
however now i want to compare the values date1 in the first duplicate orders to the second duplicate order...like compare aaaa of the first row and aaaa of the second row ...how to do that? i need to compare the date1 in minutes..i only wan duplicate orders with minutes difference less than 30mins
eg
id Order1 date1
1 aaaaa 20051001 12:45
2 aaaaa 20051001 12:10
3 bbbbb 20031002 15:05
4 bbbbb 20031002 15:50
View 9 Replies
View Related
Jul 30, 2007
Hi
I€™ve a table like this (in SQL Server 2000).
v1 v2
2 8
7 10
11 15
13 17
v1 value of a row must be grater than v2 value of previous row, other wise I need to display that row, in above example, I need to display 2nd & 4th rows.
please advise
Thanks
View 9 Replies
View Related
Feb 12, 2008
I running a query that returns a information from many tables. I need a way to compare the row returned to the previous row. This query currently returns the requested information for everytime an item placed. I need the query to return only the most recent order information. I can do this by doing a basic loop comparing the jobmatl.item and po.order_date. If the jobmatl.item match between the current row and last row compare the dates and keep the oldest.
Declare
@assembly ItemType
SET @assembly = '1110-2014'
SET @assembly = ISNULL(@assembly, '%')
SELECT
DISTINCT
jobmatl.item
, item.description
, item.drawing_nbr
, jobmatl.matl_qty
, itemloc.qty_on_hand
, vendaddr.name
, po.order_date
FROM
jobmatl with (nolock)
inner join item with (nolock) on item.item = jobmatl.item
inner join job with (nolock) on jobmatl.job = job.job
inner join poitem with (nolock) on item.item = poitem.item
inner join po with (nolock) on poitem.po_num = po.po_num
inner join vendaddr with (nolock) on vendaddr.vend_num = po.vend_num
inner join itemloc with (nolock) on itemloc.item = item.item
WHERE
jobmatl.job < ' 990000'
AND
job.item LIKE @assembly
ORDER BY
jobmatl.item
, po.order_date
View 4 Replies
View Related
Jul 20, 2005
I need the maxvalue of 2 colums for each rowSelect date1, date2, maximum(date1,dat2) as datemax.Is this simple to realize ?date1 and date2 can be NULL.something like this:select date1,date2, maxdate =CASEwhen date1 is null then date2when date2 is null then date1elseif date1 > date2 then date1else date2from xythanks for your helppaul
View 4 Replies
View Related
Oct 10, 2015
I have three date columns startdate,enddate,rmd
I need to write a query like get all the rows by comparing rmd with system todaydate and these must be with in startdate and enddate
id startdate enddate rmd
1 Â 10-oct-15 Â 16-oct-15 Â Â 11-oct-15
2 Â 11-oct-15 Â Â 14-oct-15 Â Â 11-oct-15
3 Â 09-oct-15 Â Â 11-oct-15 Â Â Â 10-oct-15
4 Â 07-oct-15 Â Â Â 08-ot-15 Â Â Â Â 07-oct-15
5
if sysdate(today) is 11-oct-15 then i need to get all the rows of 1, 2,3
View 5 Replies
View Related
Sep 23, 2015
I have 2 database, databaseA and DatabaseB with same table structure.
I change lot of table structure in databaseB.
So i want compare what field that i add or delete in databaseB.
it's like what field there are in databaseB and not found in databaseA or nothing in databaseB but exist in databaseA.
How can i do that?
View 7 Replies
View Related
Sep 11, 2015
i designed a database for eshop.
i have two table one of them is products and it has id,code,name columns and the other one is option with id,proid,option,optiondes column. and there is a relationship with id from products to proid in option table.
i want to make query that results is compare two or more products with the same option column.
View 2 Replies
View Related
Jun 27, 2014
I have the following recordset:
cmdBatchNbPdsLbsZONE
817159644 1.55320031
817159652 9.09590031
817159679 2.5891806
817159687 5.7123006
817159709 2.3903006
817159733 2.2792006
817159741 2.0647007
817159768 1.2430007
817159784 4.1547006
817159792 3.56576013
I need to extract the corresponding price from the following table:
Zone MaxWeight Price
---------------------- ---------------------------------------
31 1.70 7.14
31 2.20 8.76
31 3.30 9.47
31 4.40 9.69
31 5.50 10.61
31 6.60 11.05
31 7.70 11.49
31 8.80 11.93
31 9.90 12.37
31 11.00 12.81
31 12.10 13.23
In this case, the 2 first rows should give a price of
1) 7.14 (weight between 0 - 1.70)
2) 11.93 (weight between 8.80 - 9.90)
How can I do that with a query?
View 4 Replies
View Related
Aug 7, 2014
We have a table setup to track changes that are made to another table, for auditing purposes. How do we compare the most recent record in the change table with the previous record in the change table? Particularly, we have a column named DUE_DATE in the change table and want to identify when the most recent change has a different DUE_DATE than the previous change made.
View 8 Replies
View Related
Oct 22, 2014
I am fairly new to SQL and writing queries so bear with my faults. I am learning on the job, which is good and bad. Below is a query that I have written to obtain some information. The problem arises when we have a patient who goes from Patient Type '1' to Patient Type '2'. This needs to be considered a singular visit and the only way I can think that this may work is if: for any specific medical record a dsch_ts is equal to the Admit TS on the next row.
How to complete something like this and my google searches have been fruitless. I attached a spreadsheet with an example of what I am getting.
SELECT DISTINCT
TPM300_PAT_VISIT.med_rec_no,
TSM040_PERSON_HDR.lst_nm AS 'Last Name',
TSM040_PERSON_HDR.fst_nm AS 'First Name',
[Code] ....
View 6 Replies
View Related
May 8, 2008
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
View 2 Replies
View Related
Jan 9, 2008
Rows in table A that have a business status of 'open' are written to table B (on a different db) on a daily basis.
I have managed to extract the relevant rows in table A and table B.
What I now need to do is compare table A, row N with table B row N and return them both if the values differ.
What is the best way of doing this
e.g.
Table A
customerId amount
1 200
2 106 *return this row*
3 412
Table B (filtered by MAX(audit date))
customerID amount
1 200
2 100 *return this row*
3 412
?
View 6 Replies
View Related
Jul 16, 2015
I downloaded a day's worth of data into a single table first and named it as Full_Day_Data_Table.(10,000 records)
Later for some other purpose, downloaded the same day's data into five small tables.
Now when I compare the total row count of  Full_Day_Data_Table vs Sum of row counts of five small tables, the row count does not match.Â
So, I would like to know the records that exists in Full_Day_Data_Table and not in small tables.
View 5 Replies
View Related
Aug 12, 2015
I need to compare columns in tables on 1 database on one server versus the same on a 2nd server.
I'm looking for added columns in dbase 1.
Is there a system T-SQL script that can be used for this?
View 4 Replies
View Related
Jun 10, 2015
I need to pull dates from a DB2 database via TSQL (Linked server - IBM DB2 for i IBMDASQL OLE DB Provider) and compare it to today for a less than or greater than type comparison.
Database: DB2, Customer information housed here
Columns:
UTOFMM - Month (2 character, numeric)
UTOFDD - Day (2 character, numeric)
UTOFYY - Year (2 character, numeric. Problem: years from 2000 to 2009 are stored as 0, 1, 2, ... etc)
UTOFCV - Century Value (2 char, numeric. Â 0 = before 2000, 1 = in or after 2000)
I need to concatenate the date to be "sql" friendly, and then compare to today's date. Â It's to find any customer with date values in the fields above, and then differentiate between dates before today and after today.Here is the snippet of what I'm trying to fix. Â This portion of a nightly job is just checking for <u>any</u> value in the UTOFMM column of the current record.
Add Customer ID
Update [responder].[Temp_RX_CUSTOMERS]
set CustomerID = lf.UTCSID
from [responder].[Temp_RX_CUSTOMERS] LEFT Outer Join
[HTEDTA].[THOR].[HTEDTA].UT210AP lf ON [responder].[Temp_RX_CUSTOMERS].LocationID = lf.UTLCID
where lf.UTOFMM = 0
GO
View 4 Replies
View Related
Jul 24, 2015
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB]
GO
/****** Object: Trigger   Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
View 3 Replies
View Related
Apr 12, 2006
Hi folks, I've got a fairly easy one here me thinx. I'm looking for the best way to compare two entire rows from two seperate tables which have the same primary key.
Here's the basic lowdown:
I get some data every night from an external system (cache') via DTS. This is more or less my "master" data which drives my application. I have just been informed of an interesting constraint. If any of the data changes in the external system, those changes do not become effective until the first day of the ensuing fiscal quarter.
I'm solving this by running the DTS as normal, but populating a "duplicate" table which I will evaluate once per quarter for any changes. This is also the preferred solution because they would like to see a snapshot between current cache' data and the data my application is currently working with.
So, I end up with two identically structured tables. both tables have the same primary key and can be linked by an id field with relative ease. What I would like to do is a full row comparision once this join is established.
Right now I explicitly check the value of each column. ie:
WHERE t1.field1 <> t2.field1 OR t1.field2 <> t2.field2 OR t1.field3 <> t2.field3 ... etc
I'm hoping there is something buried in TSQL that I just don't know about that can handle comparing entire rows and tell me if they're different. Or perhaps there's another approach all-together.
Any thoughts?
View 5 Replies
View Related
Mar 2, 2011
I need to determine if a value for a group of rows is the same or different and I am not sure where to begin. I am fairly new to writing T-Sql code. I am working with SQL Server 2005. This is a work assignment; I am not a student.
I have two tables: One for Course and another for CourseDays. As the Course table implies, it lists courses for a school. The CourseDays tables has a row for each day a course is held. For instance, one course maybe held on Monday, Wednesday, and Friday, so there would be three rows, one row for each day. A given course could be held in a different room for each day. I am trying to write a query that returns one row for each course, and if the room number is the same for each day the class is held, return that room number in the row, else return 'Various'.
Course table:
CourseID, Desc
1 English
2 History
3 Science
CourseDays table:
CourseID, Day, RoomID
1 M 320
1 W 445
1 F 680
2 T 123
2 Th 123
3 M 514
3 T 514
3 W 521
3 Th 901
3 F 521
Expected results:
CourseID, Desc, RoomID
1 English Various
2 History 123
3 Science Various
I simplified the example, as there are about 30 columns in the table and about half a million rows.
View 14 Replies
View Related
Aug 14, 2014
How would I compare 2 rows to find the difference in the columns?
Example:
ID Column1 Column2 Column3
1 Text1 Text4
2 Text1 Text2 Text3
Result:
Column1: Text2 New
Column3: Text4 Old Text3 New
View 6 Replies
View Related
May 18, 2015
I need to fill the cell background color in the Matrix Table SSRSÂ report based on below requirement -
When
For A resource 'Capacity' equals to 'WorkExcludingCapacityAndAvailbility' and Project Status equals to OPEN then GREEN
When
For A resource 'Capacity' equals to 'WorkExcludingCapacityAndAvailbility' and Project Status equals to PENDING then RED
Here is the below mock-up data -
Looking for solution based on above mockup data how I can compare different rows value by resource considering Project Status Column value in Matrix Table report to set the background color.
View 3 Replies
View Related
Oct 20, 2015
I need to take all records from table @A where ID = 1. Also i need to process the records with datewise from table @A. Here is the table structure
DECLARE @A TABLE (ID INT, ACCOUNT VARCHAR(10), EFFDT DATE)
INSERT INTO @A VALUES (1,'AAA','2015-10-01')
INSERT INTO @A VALUES (1,'BBB','2015-10-01')
INSERT INTO @A VALUES (1,'CCC','2015-10-01')
INSERT INTO @A VALUES (1,'AAA','2015-10-05')
INSERT INTO @A VALUES (1,'DDD','2015-10-01')
INSERT INTO @A VALUES (2,'AAA','2015-10-02')
INSERT INTO @A VALUES (2,'BBB','2015-10-02')
INSERT INTO @A VALUES (2,'CCC','2015-10-02')
INSERT INTO @A VALUES (2,'DDD','2015-10-02')
[code]...
how to achieve this in SQL query, i cannot use CTE or temp table as i need to use this code in another tool, it has to be single query, can use subquery or join would be better.
View 4 Replies
View Related
Jan 29, 2014
Is there a efficient way to compare two different columns of 2 different rows in a data set as shown below.
For eg: I would like to DateDiff between Date2 of RowID 1 and Date1 of RowID 2 of IDNo 123. After this comparision , if datediff between two dates are <=14 then i want to update 1 else 0 in IsDateDiffLess14 of RowID1 . In below example its 0 because datediff of two dates >=14. So, want to compare the Date2 and Date1 in this sequence for the same IDNo. For RowID 6 there is only 1 row and no other row to compare, in this case IsDateDiffLess14 should be updated with 0.
RowID IDNo Date1 Date2 IsDateDiffLess14
1 123 04/10/2013 04/12/2013 0
2 123 05/10/2013 05/11/2013 1
3 123 05/21/2013 05/25/2013 0
4 112 01/10/2013 01/14/2013 1
5 112 01/27/2013 01/28/2013 0
6 120 03/10/2013 03/12/2013 0
View 4 Replies
View Related
Dec 18, 2014
I run the script below once a day to keep track of row count over time. I would like to compare the results from today and yesterday to see if anyone deleted more than 20% of data from any given table. How would I do this? I really don't need the data anymore than a day just to compare the results.
Mon - Run script to collect row count
Tues - Run script to collect current row into temp table
,compare all row count in both tables
,purge records from Monday and insert current
Wed - Run script to collect current row into temp table
,compare all row count in both tables
[code]....
View 4 Replies
View Related
