The Secure Sockets Layer (SSL) can be used to encrypt data transferred on our network between our SQL Server instance and a client application. My question is that can I configure Secure Sockets Layer (SSL) encryption on my SQL Server, While this requires a trusted certificate?
View 2 RepliesI inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I'm trying to create a job that will copy a backup file from a mapped network drive to a local folder however it keeps failing due to a privilege.
The command is:
copy 10.10.10.5f$ est.nightly H:MSSQLBackup est.nightly
I can run the command successfully from the command prompt, however using the same command in a SQL Server job it fails with "Access is denied".
How do I configure the mapped network drive to allow the Sql Server Agent to get access to it?
I've been reading about the protocols and i've been trying to connect to my SQL SERVER using each one of the protocols, but i think I'm missing something, i dont have any problems using Shared Memory and TCP protocols, but I'm not pretty sure how to connect to my remote SQL SERVER using NAMED PIPES protocols. The books On Line of Microsoft refer that you can connect using this protocol using the next syntax: Connecting to a default instance by specifying a named pipe name:
APPHOSTpipeunitapp
Connecting to a named instance by specifying a named pipe name:
APPHOSTpipeMSSQL$SQLEXPRESSSQLquery
Connecting to default instance by name, forcing a named pipes connection:
np:APPHOST
Connecting to named instance by name, forcing a named pipes connection:
np:APPHOSTSQLEXPRESS
But I can't connect to my remote SQL SERVER, if i try the same with my local SQL SERVER i don't have any problems. I've been reading the articles so many times searching something about Named Pipes is only for local connections, but Microsoft say that it's posible to connect to a remote SQL SERVER, but i don't know how to do that. The firewall is disabled, I changed the APPHOST in the above syntax for the IP address of my SQL SERVER but it didn't work..
I'm having an issue in encrypting large documents. I know that previous editions ENCRYPTBYKEY had a maximum size of 8,000 byte limitation. Does SQL Server 2014 have any new features that overcomes this limitation?
Using
SQL Server 2014 Std
Symmetric key with AES_256
I'm having problems with the following code:
--DROP MASTER KEY
--GO
USE master;
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = 'Pass@word1';
GO
USE master;
[code]....
What am I missing? What do I have to do if I get in a situation where I need to back out and start over?
[URL]
I want to setuo AlwaysON that requires Node and FileShare Majority Quorum settings..
I want to know how to configure File share for windows clustering ????
I need to encrypt some column level data in multiple tables in SQL server 2014. I've never tried encryption in SQL server 2014. How can I achieve it?
View 4 Replies View RelatedI am trying to implement the column encryption on one of the tables, have used the below link as the reference and got stuck at the last step.
[URL] ....
I have completed the following steps so far.
- CREATE MASTER KEY ENCRYPTION BY PASSWORD = ‘myStrongPassword’
- CREATE CERTIFICATE MyCertificateName
WITH SUBJECT = 'A label for this certificate'
- CREATE SYMMETRIC KEY MySymmetricKeyName WITH
IDENTITY_VALUE = 'a fairly secure name',
ALGORITHM = AES_256,
[Code] .....
Example by using the function
EXEC OpenKeys
-- Encrypting
SELECT Encrypt(myColumn) FROM myTable
-- Decrypting
SELECT Decrypt(myColumn) FROM myTable
When I ran the last command :
-- Decrypting
SELECT Decrypt(myColumn) FROM myTable
I get the following error :
Msg 257, Level 16, State 3, Line 2
Implicit conversion from data type nvarchar to varbinary is not allowed. Use the CONVERT function to run this query.
Where will I use the convert function, in decrypt function or in select statement?
I have to disable newly implemented database encryption. It's a necessity unfortunately. Can I do this during production hours without much of a hit? I know I have to restart the instance after it's done. Can I expect performance impacts or other issues?
View 1 Replies View RelatedIs it possible to configure transnational replication between two different domains also non trusted domains.
It's possible means what i need to take care before configure replication and how to configure transnational replication between two different domains.
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
How to encrypt the java application code using the 'with encryption' clause from sql server stored procedure or function.
View 3 Replies View RelatedBasically, I am asking if it is possible to use SSMS (Query Analyzer window) with Informix. I am thinking linked server. If I have the ODBC driver installed on my workstation (win 7 pro VM workstation -- SSMS on same VM machine) is this doable? Do I just do the standard linked server routine or is there a special way (if it is even doable).
View 4 Replies View RelatedI had to re-image my computer and reinstall SQL 2014. Â Now, when I open a table (edit top 200 rows) a tab opens (of course). Â But if I do not hit something like Show Criteria Pane and try to open another tab the first tab is replaced by the second table's tab. Â
How do I keep both open before hitting Show Criteria Pane?
I have created two user defined functions for encryption and decryption using passphrase mechanism. When I call encryption function, each time I am getting the different values for the same input. While I searching a particular value, it takes long time to retrieve due to calling decryption function for each row.
best way to encrypt and decrypt using user defined functions.Below is the query which is taking long time.
SELECT ID FROM table WITH (NOLOCK)
                    WHERE dbo.DecodeFunction(column) = 'value'
When I try to use symetric or asymetric encryption, I am not able to put "OPEN SYMETRIC KEY" code in a function. So, I am using PassPhrase mechanism.
How can we get the list of clustered columnstore index in a database in sql server 2014
View 3 Replies View RelatedHello All,
We've A2k db which we plan to migrate to SQL 7.0 very soon. Though am familiar with upsizing wizard BUT don't know how to configure Access forms, reports etc. to talk to SQL back end tables. So that information entered via Access forms can be stored in sql and reports can be generated using sql tables..
Thanks in advance..
What are the steps in configuring sql server 6.5 to have excellent performance?
what are the items that I should think of and based on what condition I can set up the configuration?
Ahmed
Hi All,Here is my questionWhat might you configure on a SQL Server so that a Web server runningon the same machine, with limited memory, will continue to performoptimally?Thank youRaju
View 1 Replies View RelatedI have searched and could not find an answer for this one I read log and it said
Starting Service ...
SQL_Latin1_General_CP1_CI_AS
-m -Q -T4022 -T3659
Connecting to Server ...
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
driver={sql server};server=KENSHIN;UID=sa;PWD=;database=master
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
SQL Server configuration failed.
how do I fix this?
Hi all,
I'm having a problem configuring one of my SQL servers
as a distributor. I've done it successfully on another
server, so I know that it's nothing procedural and there
must be an issue with the way the server is set up.
When I click 'finish' on the Configure Publication and
Distribution Wizard, I get the following error message:
Enterprise Manager could not configure 'ABEL' as the
distributor for 'ABEL'.
Error 20017: Cannot add the remote distributor at this time.
Make sure that the local server is configured as a Distribution
Publisher at the Distributor.
Can anyone point me in the right direction? I'm fairly new
to SQL Server, so feel free to explain things in a
condescending manner. ;-)
I have a SQL Server version 7.0 and want to configure IBM DB2 on OS 390 as a linked server on it . I installed DB2 clients on the SQL Server and thru DB2 Connect ,I am able to access the mainframe data using the clients . However I am having problems configuting the Mainframe server using IBM DB2 OLE DB Driver .I am not sure if we need to use Microsoft OLE DB Driver .
View 3 Replies View RelatedOur company is going to use SAN (HP or EMC or Fuji) for SQL Server failover rather than MSCS. So far, DBA has no knowledge of SAN.
Would you please to tell me, how does SAN depend on SQL Server? I assume SAN software can make disk failover if there is a network, disk or OS failure in primary node. If SQL Server or SQL Agent is failure, can SAN software detect it? (or can SAN disk failover depend on SQL Server or SQL Agent services?)
Please let me know where can I find any configuration document regarding SAN for SQL Server failure. I had spent 2 days in HP and EMC wrbsite and found nothing.
Happy Thanksgiving.
Mary
hi there!
i have been trin to configure my network for the sql server 6.5 but in vain.Actually
i have two pc in the network , one is server and the other is workstation.i install
SQL server on the NT server and then install the sql client oon the workstation but i
donno how to configure that client for the server.
so i just want u leet me that what particular steps should i follow to make that
network work properly for the sql server 6.5. i just wanna use sql server 6.5 in a
simple situation. i am not an advance user of the sql server 6.5.
i will be greatful to GOD if uu help in this problem.
sincerely,
romanafroz@hotmail.com
Hello, everyone:
I want to create a stored procedure to execute validation and send results to clients. When I did testing to send email by:
EXEC master..xp_sendmail
@recipients='you@you.com',
@message = 'Validation Finished',
@subject = 'foo was fired.'
I got error loke:
Server: Msg 18030, Level 16, State 1, Line 0
xp_sendmail: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.
How to configure Outlook and SQL Server Email next?
Thanks
ZYT
Hi all,
Please, tell me how to configure database SQL server 2000 for a large system, and make it uninterrupted run.
Thanks
Hi,
I have installed MS SQL Server on a win XP and a MS SQL Server client on a win2000. I don’t know how to configure this client to access the server remotely.
Any pointer?
Thanks.
I am very new to SQL Server.
Hi All,
I am new to SQL server 2005. I have installed SQL server 2005 which came along with the visual studio 2005 package. Now i could see the visual studio 2005 in the installed programs list.
I really dont know how to configure the the installed SQL server. how to create tables and veiw. frankly speaking i could not see where is the head and tail.
To be straight forward, i havent used any database to a great extent. earlier during the starting of my career, i developed a small application using VC++, which used to interact with the DB server on a very minor scale; whenever i wanted to create a table for used to do it with sql client which was also installed in my machine.
currently i am againg devoloping a small apliccation using VC++, this time for devlopment and testing purposes, I have SQL server 2005 installed in the same machine which i am using for development.
Now as i said eralier i am not even aware how to configure, how to start creating table...... :-(
all i have done is i have installed SQL server 2005 and all i could see is SQL Server 2005 listed in the installed programs list :-(
some one please help me.... :-(
I couldnt even create a DSN
Thanks and Regards
RK
When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace
What is the problem and how to solve it.
Hi everybody,I'm installing a network monitoring tool (OpManager). Duringinstallation I reached the following step: Configure the SQL Serverdetails.Host Name: ???Port: 1433Database Name: xxxUser Name: ???Password: ???I don't know which host name I need to put in and also I don't knowwhich user name and password is required.Please can anyone help me with this.Thank you!
View 1 Replies View Related
I'm having problem with initialization tab on Configure Report Server
All tabs are checked and green , but when I click initialize I got this error:
ReportServicesConfigUI.WMIProvider.WMIProviderException: The report server installation is not initialized. (rsReportServerNotActivated)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.InitializeReportServer(String installationId)
I don't know how to fix it...any ideas??
thanks
Nelson
Hi Guys,
I am trying to get started with Reporting Services, and I am trying to configure the report server on my local computer running vista and sql server 2005.
I am trying to configure according to the following instructions:
http://msdn2.microsoft.com/en-us/library/aa545752.aspx
http://msdn2.microsoft.com/en-us/library/aa545752.aspx
But I got stuck on the step 11 to 13, I get the following error when I click on Apply (STEP 13)
ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
do I need to create a user for the reporting services or can I use my own user, which has admin rights on my laptop? Do I need to to do anything before I follow the instruction from http://msdn2.microsoft.com/en-us/library/aa545752.aspx ?
I also need to know how to delete the dabatases I ended up creating using Reporting Services Configuration Manager.
Thanks