So my data is delivered as numeric(9,2)...like 100.00. I have to extract that data and store it as a varchar 0 filled without the decimal place...like 0000010000///I tried the following and it did not work...
RIGHT('000000000'+CONVERT(VARCHAR,[EODPosting].[Amount]),10),
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
Below is garbage data and structure (I think enough to get point across). How can I perform calculations needed?
Create Table #1234
(
abcd decimal(16,4)
,defg decimal(16,4)
,hijk decimal(16,4)
,logon datetime
,logoff datetime
[code]....
In my inner query,
I have a column "Cost" (data type=varchar) and another column "Qty" (data type=int)
Now in outer query, I need to multiply this 2 columns Cost*Qty.But after trying some cast operation still getting "Error converting data type varchar to numeric."
I have just loaded my db table from an excel file using the import wizard. Prior to the import, I set my data types and in the field that I need a number with 1 decimal place I chose a decimal data type.
Made since to me
However, now my numbers do not have the decimals.
Please help.
I have one of the sample values in my table. I need to convert below value to Decimal(18,5)
DECLARE @i
VARCHAR
SET @i
= '0.9'
Output i m looking for is 0.90000
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
when i execute my store procedure it give this error.
USE [CWMNEW]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[BOQ]
SELECT'Return Value' = @return_value
GO
[code]....
I have a sql code that I am having some difficulty with. All I'm trying to do is get each department and sum the amount by month based on the date in the table. I am getting "error converting data type varchar to numeric".
Code:
select DEPARTMENT,
CASE
WHEN ((DATE >= '06/01/2014') AND (DATE <= '06/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JUNE',
CASE
WHEN ((DATE >= '07/01/2014') AND (DATE <= '07/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JULY'
from L27_PHAROS_DETAIL_DATA
WHERE Department = 'TECHNOLOGY SERVICES'
GROUP BY DEPARTMENT, DATE
ORDER BY DEPARTMENT
Hi Group:
I try to JOin to tables: Enterprise has a decimal(5,3) and COHIER has varchar 5. All I am getting is an error on converting data. How can I fix this problem.
SELECT a.Security_Value, b.Enterprise_Number, b.Enterprise_Description
FROM dbo.COHIER a INNER JOIN
dbo.Enterprise b ON a.Security_Value = b.Enterprise_Number
Thanks!!!!!!
Select SchoolNumber + ' ' + ShortSchoolName as SchoolList from tblSchoolsSubset
This is my simple sql statement which generates the error in the subject line.
SchoolNumber is type numeric and ShortSchoolName is nvarchar
There are only numbers in SchoolNumber.
Yes again a topic like this, I couldn't get an answer for my problem so I started a new topic.
Im getting this error for these lines:
$registreer = "INSERT INTO Gebruikerstelefoon (gebruikersnaam, telefoonnummer, volgnr) VALUES ('".$_SESSION['gebruikersnaam']."', '".$_POST["telefoonnummer"]."', '')";
mssql_query($registreer) or die("Fout bij toewijzen telefoonnummer.");
'telefoonnummer' (phonenumber) is nummeric, users can insert their phonenumber in a input field (text) and register along.. ( this is a second query for the column phonennumber) though this doesn't work..
Hi guys,
Been a while, also tried doing a search but no go.
Im getting this error in sql analyser:
Server: Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric
Both queries work fine individually, im trying to append them together, with column columns as below:
SELECT PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
COMMISSION_TXN.PERIODSEQ,
COMMISSION_TXN.SUPER_DISTRIBUTOR_CODE,
COMMISSION_TXN.PREMISE_CODE,
COMMISSION_TXN.DISTRIBUTOR_CODE,
COMMISSION_TXN.INTERNAL_EXTERNAL,
COMMISSION_TXN.SERVICE_ID,
COMMISSION_TXN.ACCOUNT_NUMBER,
COMMISSION_TXN.PROMOTION_CODE,
COMMISSION_TXN.PRODUCTDESCRIPTION,
COMMISSION_TXN.PRODUCTID,
COMMISSION_TXN.PROMOTION_NAME,
COMMISSION_TXN.EVENTTYPEID,
COMMISSION_TXN.MEASUREMENT_NAME,
Mobile_revenue = ('No Mobile revenue for txn level'),
COMMISSION_TXN.COMMISSION_AMOUNT,
product_id = ('No product id for txn level')
FROM COMMISSION_TXN INNER JOIN
PERIOD ON COMMISSION_TXN.PERIODSEQ = PERIOD.PERIODSEQ
union all
SELECT DISTINCT
PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
TC_Mobile_Usage.PERIODSEQ,
Dealer_Hierarchy.SUPER_DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE1 AS Dealer_premise_code,
Dealer_Hierarchy.DISTRIBUTOR_CODE,
internal_external = ('External'),
TC_Mobile_Usage.GENERICATTRIBUTE2 AS Service_Id,
account_number = ('none for txn file'),
promotion_code = ('Usage'),
Product_description = ('Usage'),
Product_id = ('Usage'),
promotion_name = ('Usage'),
TC_Mobile_Usage.EVENTTYPEID,
measurement_name = ('Usage'),
sum(TC_Mobile_Usage.VT_VALUE) AS Mobile_revenue,
sum(TC_Mobile_Usage.CONTRIBUTIONVALUE) AS Commission_Amount,
TC_Mobile_Usage.PRODUCTID
FROM TC_Mobile_Usage INNER JOIN
PERIOD ON TC_Mobile_Usage.PERIODSEQ = PERIOD.PERIODSEQ INNER JOIN
Dealer_Hierarchy ON TC_Mobile_Usage.GENERICATTRIBUTE1 = Dealer_Hierarchy.PARTICIPANTID
WHERE (NOT (TC_Mobile_Usage.PRODUCTID = 'iddv')) AND (NOT (Dealer_Hierarchy.POSITIONTYPEID LIKE 'MI %')) AND
(TC_Mobile_Usage.PERIODSEQ IN (107))--, 108, 110, 111, 112, 114))
group by PERIOD.STARTDATE,
PERIOD.DESCRIPTION,
TC_Mobile_Usage.PERIODSEQ,
Dealer_Hierarchy.SUPER_DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE1,
Dealer_Hierarchy.DISTRIBUTOR_CODE,
TC_Mobile_Usage.GENERICATTRIBUTE2,
TC_Mobile_Usage.EVENTTYPEID,
TC_Mobile_Usage.PRODUCTID
Any suggestion on how to fix it?
Champinco
Hi
Please help me out
declare @CID numeric(3,0)
set @CID = 121
SELECT *
from Table_name
where ID Like ''''+@CID+'%'''
I am getting error like
Msg 8114, Level 16, State 5, Line 3
Error converting data type varchar to numeric.
T.I.A
I am having difficulty with my sql and I am not sure what do to. I am new to this. Any help you can give would be helpful.
Here is the statement that is giving me trouble. If I take this out of my Sql query everything runs fine.
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE ''
END as AccessFeeFinal,
Below is my full query.
SELECT
--clms_sku,
--clms_line,
--clm_prod,
clio_type,
clm.clm_id1,
clm.clm_rcvd,
CLM_DOUT,
clm_wkpct,
clm.clm_1a,
clm.clm_12a,
clm.clm_12b,
clm.clm_55d,
clm.clm_clir,
clm.clm_65a,
clm.clm_medb2,
clm.clm_tchg,
clm.clm_base,
clm.clm_stades,
clm.clm_meda4,
CLM_H30 =
Case
When CLM_H30 = 0.00 Then clm_sppo
else clm_H30
End,
clm_prod =
CASE
WHEN CLMS_sku = 'NEGO' THEN 'NEG'
WHEN CLMS_sku = '% OF CHGS' THEN 'NEG'
ELSE clm_prod
End,
"clm_nego" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE clm_nego
END,
"clm_sppo" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE clm_sppo
END,
clm_1e,
clm.CLM_ATT1 as Note,
CASE clm_att1
WHEN 'NG' THEN (clm_sppo)*(clio_fee04/100)
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN (clm_sppo)*(clio_fee04/100)*.65
ELSE ''
END as AccessFeeFinal,
CLM_ATT2,
CLM_ATT3,
clio_fee04 as "ACCESSFEEIMPACT",
"(clm_sppo/CLM_TCHG) * 100" =
CASE
WHEN CLM_ATT1 = 'NA' THEN 0.00
WHEN CLM_ATT2 = 'NA' THEN 0.00
WHEN CLM_ATT3 = 'NA' THEN 0.00
WHEN CLM_ATT4 = 'NA' THEN 0.00
ELSE (clm_sppo/CLM_TCHG) * 100
END,
clio_wrk1 as MAS90#
FROM dbo.clm clm Join
dbo.cli cli ON clm.clm_clir = cli.cli_id1 JOIN
dbo.clip clip ON cli.cli_id1 = clip.clip_id1 JOIN
dbo.clio clio ON cli.cli_id1 = clio.clio_id1
INNER JOIN dbo.clms clms ON clms.clms_id = clm.clm_id1
WHERE
(clip.clip_prd IN ('NEG', 'ADV')) AND
(clm_prod = 'ADV' OR clms_sku = 'NEGO' OR clms_sku = '% OF CHGS')AND
(CLM_STADES IN ('DONE','DUPO','DUPL'))and
clm_adjto = '' AND CLM_TCHG > 0. and
(clio.clio_type = 'AC')
I am having problems with a statment that I am writing.
The prop_uac is a alpha field and prop_disc is a numeric field. What I was trying to do is when the alpha field is not populated automatically pull from the numeric field. Then I wanted to put all of the results into one column. Can this be done? below is my statement. I hope you can help me.
Prop_uac =
CASE
WHEN prop_uac = '' THEN prop_disc
else prop_uac
End
hello everyone... i have some problem to with my trigger.. after execute the trigger.. i got this errro "Msg 8114, Level 16, State 5, Procedure trg_InsertPVReadingMeter, Line 14
Error converting data type varchar to numeric."
below is my command sql table PVReadingMeter
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[PVReadingMeter] Script Date: 03/25/2008 01:18:06 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[PVReadingMeter](
[PV_reading_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_reading_id] DEFAULT (newid()),
[PV_reading_date_time] [datetime] NOT NULL,
[PV_reading_meter] [decimal](8, 2) NOT NULL,
[PV_normalized_monthly_yield] [float] NOT NULL,
[PV_normalized_monthly_energy_yield] [float] NOT NULL,
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_PVReadingMeter_PV_application_id] DEFAULT (newid()),
CONSTRAINT [PK_PVReadingMeter] PRIMARY KEY CLUSTERED
(
[PV_reading_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[PVReadingMeter] WITH CHECK ADD CONSTRAINT [FK_PVReadingMeter_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
below is my trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE Trigger [trg_InsertPVReadingMeter]
on [dbo].[PVReadingMeter]
for insert
as
begin
DECLARE @PVReadingMeter VARCHAR(100)
DECLARE @PVNormalizedMonthlyYield VARCHAR(100)
SELECT @PVReadingMeter = (SELECT PV_reading_meter + '' FROM Inserted)
SELECT @PVNormalizedMonthlyYield = (SELECT PV_normalized_monthly_yield + '' FROM Inserted)
-- Print the name of the new author
PRINT 'The new photovoltaic reading meter"' + @PVReadingMeter +'" is added.'
PRINT 'The photovoltaic normalized monthly yield is "' + @PVNormalizedMonthlyYield +'"'
end;
now, this is command to insert the values into PVReadingMeter table using trigger that has been created....
quote:insert into PVReadingMeter (PV_reading_date_time, PV_reading_meter, PV_normalized_monthly_yield,
PV_normalized_monthly_energy_yield, PV_application_id)
values (getDate(), 1.1, 4234.33, 43.44, '3D23C4FE-F6FC-475E-8CEC-23FE4E738EB9')
so, i got this error... Msg 8114, Level 16, State 5, Procedure trg_InsertPVReadingMeter, Line 14
Error converting data type varchar to numeric.
what should i do???
im trying to convert this Code from Varchar to Numeric(CAST(ISNULL(del.[Day 60 AMT],0) AS NUMERIC(6,3))+ CAST(ISNULL(del.[Day 90 AMT],0) AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 120 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 150 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 180 AMT],0)AS NUMERIC(6,3)) + CAST(ISNULL(del.[Day 210+ AMT],0)AS NUMERIC(6,3))) > 0
i got an error please help.
DECLARE @ENTITY nvarchar (100)
set @ENTITY = 'AccidentDimension'
DECLARE @FIELD nvarchar (100)
set @FIELD = 'JurisdictionState'
DECLARE @KEYID nvarchar (100)
SET @KEYID = '1234567890'
DECLARE @VALUE nvarchar (100)
SET @VALUE = 'WI'
DECLARE @WC_TABLE NVARCHAR(100)
SET @WC_TABLE = 'WorkingCopyAdd' + @ENTITY
DECLARE @SQL1 NVARCHAR (1000)
SET @SQL1 = 'INSERT INTO ' + @WC_TABLE+ ' (Claim, '+ @Field +') VALUES ('''+ @KEYID +''', '''+@VALUE+''')'
EXECUTE sp_executesql @SQL1
Can somebody help me. I get this error:
Error converting data type varchar to numeric.
while executing this Dynamic TSQl Command
Hi,
Thank you in advance for your comments/suggestions. I am trying to create a View of a Table. The table is created by another application so I am unable to recreate it they way I want, also the data that is in the columns that I want to CAST are "numbers" not letters and will only be numbers. In the view I need certain columns to be CAST as numeric from varchar.
Here is the syntax that I am currently using:
Code Snippet
SELECT CAST(szF1 AS datetime) AS [Login Date/Time], szF2 AS [User Name], CAST(szF3 AS numeric) AS [Documents Indexed], CAST(szF4 AS datetime) AS [Logout Date/Time], CAST(szF5 AS numeric) AS [Documents Sent to QC], CAST(szF6 AS numeric) AS [Documents Reconciled], szF7 AS [Reject Reason], CAST(szF8 AS datetime) AS [Report Date]
FROM dbo.F_Report_Data AS a
WHERE (szF3 <> 'Blank')
When I open the view I get the error message about converting varchar to numeric.
Thanks,
Erik
I have always programmed my ASP pages with MS Access DB's and we recently got a SQL Server 2000. So, I'm totally new to SQL Server 2000.
I trying to retrieve data from a table in SQL, based on values from two input fields (text fields) on a form in the web page.
To process the form, I am using the following syntax:
Set oRs = oConn.Execute("SELECT BBILNAM, BTWP, BTXP, BPARCEL, BBILADD, BBILCTYST, BBILZIP5 FROM TESTdb WHERE BTWP = 'TWP' AND BPARCEL = 'PARCEL'")
SQL Fields in Table TESTdb are (BTWP = numeric field) and (BPARCEL = text field)
I realize that the problem is that I'm comparing a numeric field in my table, to a text field from my form, but don't know how to convert the text field to a numeric field, prior to the execution of the select statement. I'm hoping someone can point me in the right direction. Thanks!
Here's the SP
Code:
USE [byrndb]
GO
/****** Object: StoredProcedure [dbo].[sp_GetLikeJobsByJobNumber] Script Date: 08/28/2012 15:17:28 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
Why when I run
Code:
USE [byrndb]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[sp_GetLikeJobsByJobNumber]
@number = N'23913'
SELECT'Return Value' = @return_value
GO
Am I getting an "Msg 8114, Level 16, State 5, Procedure sp_GetLikeJobsByJobNumber, Line 16
Error converting data type varchar to numeric." error? Line 16 is "@number varchar = null"
As per my requirment using below script to convert from varchar to numeric.
declare @stg varchar(50)
set @stg='12,000,00'
select CONVERT(NUMERIC(17,2),@stg)
Getting error : Error converting data type varchar to numeric
I am trying to add a field (bank_chk_amt] from a table in to my query to bring in a dollar amount....I originally had this below
SELECT dbo.CBPAYMENT.REFERENCE_NO, 'CCMCCHBREF' AS Literal, RTrim([description]) + ', ' + [bank_chk_amt] + ', ' + convert(char(10),[check_date],101) + ', ' + 'Refund check sent to ' + [payee_name] AS [Free Text]
FROM dbo.CBPAYMENT;
but I would get "Error converting data type varchar to numeric".So my co-worker modified it and added (str([bank_chk_amt]) to my query which worked, but I noticed it dropped of the cents. So instead of 80.35 it would show 80 And I noticed it rounded 100.50 to 101...How can I bring in the full dollar amount and without adding?
I have the following code and i want to passed more than one value:
DECLARE @myvendedor AS varchar(255)
SET @myvendedor = '87,30'
print @myvendedor
SELECT top 10 ECOM.COM1,* from ecom (nolock) WHERE ecom.PORVEND=1 AND ECOM.VENDEDOR IN (@myvendedor)
Table Field ECOM.VENDEDOR is Numeric(4,0)
This error occur:
87,30 --Result of PRINT
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
I change :
DECLARE @myvendedor AS numeric(4,0)
and this error appear:
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
OK, so I have this query where I'm trying to subtract values like this, when I do this I am getting (Arithmetic overflow error converting varchar to data type numeric.) I have tried many different things, and now of these work, it'll either return 0 because it loses the .XXXXX.
Convert(DECIMAL(10,7),CAST([TIME_OF_COMPLETION] as DECIMAL(10,7)) - Convert(DECIMAL(10,7),CAST([OPR_DELIVERED_TIME] as DECIMAL(10,7)) round(cast(cast(hist.[TIME_OF_COMPLETION] AS float) as DECIMAL(15, 5)) - CAST(hist.[OPR_DELIVERED_TIME] AS FLOAT),1 SELECT convert(FLOAT,CAST('735509.00053' AS DECIMAL(10,5))) - convert(FLOAT,CAST('735509.00047' AS DECIMAL(10,5)))
I have value with data type nvarchar:
total
000000854.00
000000042.00
000000065.17
000000000024
000000000.24
How can i convert to decimal and remove 0 infront? but those with 0.xx would not remove the 0 after the dote.
total
854.00
42.00
65.17
24
0.24
Hi,
Can we insert varchar values to Decimal(9,2)/numeric(9,2) fields?
I've a temp table with varchar values. I checked using isnumeric and all the values are numeric. But when I do the insert, it fails.
I was able to insert the following values:
000290165
000501075
000290165
000326314
But NOT the following:
010773474
All the values are 9 digits only.......
How can I convert this kind of numbers?
I need to convert all the 9 digit numbers to XXXXXXX.xx format.
(7digits.2 digits)
Thanks,
Siva.
I'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
I have a column which is
Data type : varchar(10)
Date format : 8/5/2013
I want to convert that column to the following
Data type varchar: (8)
Date format : 20130805
I have a column in table which stores the actual signature from the singature pad. In the table it is stored as varchar(max) datatype and sample data looks like below. Below data is the actual signature of the person.
CREATE
TABLE #test
([Signature]
VARCHAR(MAX))
[code]...
How do i decrypt this data so i can print actual signature on my report.
I have imported data from excel file. When data came to SQL table, the typeof AMOUNT column was varchar. I tried to convert and cast amount type ofamount column to number type but it does not allow me to convert.What is the best way of importing data into SQL and type stays the same asit was in excel file ?Or anyone has any better solution, please let me.Thanks.
View 4 Replies View RelatedHello Guys,Have been getting this error(
Implicit conversion from data type ntext to varchar is not allowed. Use the CONVERT function to run this query.
) when running on the live environment but it was fine when run locally. If anyone has similar problem please let me know the fix you have done.
Thank you.