Transact SQL :: How To Get Time Portion Only Of A Date For LINQ Query
Aug 4, 2015
I'm trying to translate this portion of VFP code into LINQ query:
select COUNT(ID) as conflicts
from dbo.max4sale where <<thisform.cWhere>>
AND Start_Time >= <<VFP2SQL(m.ltBegin + m.lnStartTime)>>
and Start_time <= <<VFP2SQL(m.ltEnd)>>
AND CONVERT(varchar(5),Start_Time,108) <= <<VFP2SQL(m.lcEndTime)>>
AND CONVERT(varchar(5),End_Time,108) >= <<VFP2SQL(m.lcStartTime)>>
<<m.lcDays>>
Here is my non-working attempt:
var startTime = new DateTime(1900, 1, 1, beginDateTime.Hour, beginDateTime.Minute, 0);
var endTime = new DateTime(1900, 1, 1, endDateTime.Hour, endDateTime.Minute, 0);
var daysOfWeek = dailyLimits.Where(dl => dl.Selected == true).Select(ds => ds.WeekDay).ToList();
if (daysOfWeek.Count() < 7) // not all days of the week selected
[Code] .......
First of all, I see a bug in my logic now as the first part of the query I need to do all the time and only the second part if the count < 7. But that's not my problem - I can not figure out how to make times comparison only using LINQ. Ideally I think I'd like to have cast(start_time as time) >= @p1 as a result to be executed by LINQ.
BTW, I am only getting the error in run-time that Parse can not be interpreted. So, I need to figure out another way of making LINQ recognize my intent of checking time portion of the date only.
I hope to update a DateTime column value with a Time input parameter. Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE] @QuePoolID int=null ,@ApptTime time(7) ,@SendOnDate datetime
the ssis expression language getdate() function returns the current date with the current time. i only need to get the current date, without the current time. for example: 9/1/2006
how would i construct the proper expression to return this value?
Is there a way to strip off the time portion of a datetime datatype without changing the datatype? I know I can convert it using CONVERT (NVARCHAR(10), dbo.tblPayments.PaymentDate, 101) but I need to keep it as a datetime datatype?
I have a PHP page where the user enters a date that represents the last day of a timesheet (ts_end) and the hours worked on that timesheet. That is then written into a table where the date is a datetime type. Because the user just enters a date, the time portion of the field is set to 00:00:00. In another place, I need to sum the columns for reports submitted between the beginning of a timesheet (ts_end -6 days) and the ts_end date.
The problem is that chartreviewed values entered on the ts_end date are getting lost because the time part of the ts_end field is 00:00:00 and the time part of the dateentered for the chartreviewed value is not. For instance using 2/4/2004 as the ts_end date looses the 192 charts.
I know I can revise the query to look for charts where the dateentered is less than dateadd(d,1,ts_end) and get the right values. It seems like there has to be a way though to tell sqlserver to ignore the time part of a datetime field when querying.
We are maintaining 3 Shifts in our database. Problem in maintaining date and time for 3rd Shift. For example, today date is 13th July and third shift timing is 11 PM - 7 AM. Then I have to display the beginning date as 13/07/2015 11 PM and end date as 14/07/2015 7 AM. Please find the data(in seconds) available in database which I need to use for my calculation.
Date(Fcreacion) Start time in Seconds(Hcreacion) End time in seconds(Hcerrar) turno(Shift)
I have startdate and enddate. I like startdate to be 4/28/08 12:00:00 and enddate to be 5/4/08 23:59:59. What update statement do i need to run to update table. Currently my table show startdate 2008-04-28 05:00:00.000 enddate 2008-05-04 04:59:59.000.
I like to add a day to this date and also make time to 23:59:59. So end result for this table and recrods will be 2008-11-09 23:59:59 and next row 2008-11-16 23:59:59 so on..... 2008-11-08 23:00:00.000 2008-11-15 23:00:00.000 2008-11-22 23:00:00.000 2008-11-29 23:00:00.000 2008-12-06 23:00:00.000 2008-12-13 23:00:00.000 2008-12-20 23:00:00.000 2008-12-27 23:00:00.000 2009-01-03 23:00:00.000 2009-01-10 23:00:00.000 2009-01-17 23:00:00.000 2009-01-24 23:00:00.000 2009-01-31 23:00:00.000 2009-02-07 23:00:00.000 2009-02-14 23:00:00.000 2009-02-21 23:00:00.000 2009-02-28 23:00:00.000 2009-03-07 23:00:00.000
I have a simple table as shown: I want to have values on the last column to represent the time interval between the 2 date columns (visits); i.e for event-ID 2 for example, I will have
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29 if we pass year =2015 and month=09 then we have to get 2015-09-29 if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
I have a SQL DB with a column called time_occurred that is formatted like ( 7/28/2004 7:10:30 AM ).
What I need to do is run a report based on just the month day and year portion. I am using the calendar control so mins, sec and milliseconds are not available nor do I really need them.
I am running the Query with this Stored Procedure
ALTER PROCEDURE dbo.Prodecure1 ( @WhereClause varchar(8000) )
AS
-- Create a variable @SQLStatement DECLARE @SQLStatement varchar(8000)
-- Enter the dynamic SQL statement into the variable @SQLStatement SELECT @SQLStatement = 'SELECT column1, column2, etc...' + @WhereClause
I am trying to pull the records which are being affected i.e, comparing the values and if not same then populating the record.
I am using the below condition in where clause however i am getting runt time error as "Conversion failure when converting date and/or time from character string"
Condition in Where clause:
cast(isNull(tab1.Col1,'') as datetime) <> cast(isNull(tab2.col1,'') as datetime)
I have a requirement to be able to select and group records by the date portion of a datetime field. ie ignore the time when grouping so that all records lodged on a particular day are seen together.
I have been able to do this by
- converting the datetime data to the number of days since a given date - inserting this into a temporary table - retrieving the the data from the temporary table - convert the data back to a date using DATEPART to display dd/mm/yy
This then gives me the data grouped as required but seems to be a very difficult solution - Is there an easier way??
I need to identify time spans where members identified as having a condition have NOT had any of 5 specified services in the past 12 months. I have a table (DiabStrata) that identifies time frames for which my data shows a member as having the condition, and I have 5 separate tables with the dates of the relevant services.
I can easily identify when a member hasn't had the service at all, or is lacking it at the start or end of the time frame for which they have the condition, but I'm hitting a wall on how to deal with gaps between the minimum and maximum identification dates.
insert DiabStrata( select '1',1,'20060101','20070302' union select '1',1,'20070803','20080804' union select '2',1,'20020101','20080503')
insert hba1c(
select '1','20060301'
union
select '1','20070301'
union
select '2','20050101')
--Missed Service Begin select * into #eval from DiabStrata where strat=1
delete #eval from #eval left join hba1c on #eval.memberid=hba1c.memberid where hba1c.memberid is null --repeat for other indicators
update e set stratstart=min(dos) from #eval e join hba1c on e.memberid=hba1c.memberid having min(dos)>stratstart
update e set stratend=max(dos)+365 from #eval e join hba1c on e.memberid=hba1c.memberid having max(dos)+365<stratend
delete from #eval where stratstart>stratend --repeat for other indicators Desired output is into DiabStrata with a strat of 2 for the time frame for which they have strat 1 but do not have all 5 services within the prior 365 days. MID Strat StartStrat EndStrat 1 2 1/1/06 - 2/28/06 1 2 3/2/08 - 8/4/08 2 2 1/1/02 - 12/31/04 2 2 1/2/06 - 5/3/08
My goal is to take the btb-date and store it in the same table I loaded the seperate nodes to. Currently I am loading the req-header, req-property-address, and req-borrowers.
This date will be static in that it will remain the same for every record. My goal is to read it in and store it along with each record. Hope someone can give me some help.
I've imported a CSV file into a table in SQL Server 2012. It's a large file, 140,000+ rows, so I couldn't covert it to Excel first to preserve the date format due to Excel's row limit. In the CSV file, there were 3 column with date data in "31-Aug-09" format, and the import automatically transformed these in "31AUG09" format (varchar(50)) in SQL Server. Now I need to convert these 3 columns from varchar to datetime so I could work with them in date format.
I have a table which has a field called time and it has data like '23/04/2004 9:43:40 AM' How would i write a query that would retrieve the last hour of data from now().
i've tried this but does not work,
SELECT [time] FROM table WHERE ([time] = { fn NOW() } - 60)
those query would get me a return of value inside of datetime coloumn, which is, date of (assume i run the query today) 2014-05-12 07:00:00 until 2014-05-30 16:00:00, my question is where is the date of 2014-05-01 07:00:00 until 2014-05-11 16:00:00 goes ??
DECLARE @StartDate DateTime DECLARE @EndDate DateTime SET @StartDate = DATEADD(d, DATEDIFF(d, 0, DATEADD(m, -1, DATEADD(d, 1 - day(getdate()), getdate()))), 0) SET @EndDate = DATEADD(ms, -2,DATEADD(d, DATEDIFF(d, 0, DATEADD(d, 1 - day(getdate()), getdate())), 0)) select Datetime from InterfaceTraffic where (DateTime between @StartDate and @EndDate)
[code]...
it would get me a return of all dates of last month with all hours and what i want is to have a return of all dates of last month but with specific hour only (the hour between 7 am until 5 pm)
I'm trying to extract some data from a table in oracle. The oracle table stores date and time seperately in 2 different columns. I need to merge these two columns and import to sql server database.
I'm struggling with this for a quite a while and I'm not able to get it working.
I tried the oracle query something like this,
SELECT (TO_CHAR(ASOFDATE,'YYYYMMDD')||' '||TO_CHAR(ASOFTIME,'HH24:MM : SS')||':000') AS ASOFDATE
FROM TBLA
this gives me an output of 20070511 23:06:30:000
the space in MM : SS is intentional here, since without that space it appread as smiley
I'm trying to map this to datetime field in sql server 2005. It keeps failing with this error
The value could not be converted because of a potential loss of data
I'm struck with error for hours now. Any pointers would be helpful.
HELP... I’m new to ASP.NET so please excuse my inexperienced question. I’m using VWD 2005 and a remote SQL 2000.In the (Configure Data Source) under the (Select) tab I have this simple query:
Select * from calendarWhere event_date = now
Right off the that bat you can probably see the problem. I just want to retrieve all event at is equal to today (current date). In classic ASP is can use <%now%> and in ColdFusion I can use #now()#. What is the proper syntax the get the server current date and time, like (getDate()) in SQL?
