Transact SQL :: How To Reuse Subquery
Jul 29, 2015
with c1 As (
select 1 As '1' , 2 As '2' , 3 As '3'
)
, c2 As (
select 4 As '4', 5 As '5', 6 As '6'
union all
select 1 , 2 ,3 from c1 -- >>>>> select from c1 here
) select * from c2
union all
select * from c1 -- >>>>>> and select from c1 here
According to the query above , I try to reuse the subquery by put the subquery into 'with cte' name (c1) then i select this 2 times .
if I do this way , how many time this subquery (c1) execute ?
if 1 time then this is the right way to reuse this subquery .
if 2 times , it is not then what should i do to reuse this subquery ?
View 3 Replies
ADVERTISEMENT
Nov 23, 2015
I have the below data and want to only show records where Response Column has Max date for the commencement date and expiry date under questions column.. For example for tenantcode 52090 the highest Tab value is 2 but this is not correct as there is no associated value in response.
We need to compare all the commencement and lease expiry dates and show only the commencement and lease expiry with the recent dates. Null should be ignored Instead of using Max Tab or Max Modified date would the below logic work? Not sure how to script this.
1. Filter to find Questions containing "Expiry Date"
2. summarise to find the max expiry date per Tenant Code
3. find which records have that maximum expiry
4. join again to find the commencement date
5. union the records from (3) and (4)
6. cross tab
Declare @rent Table
(
TenantCode CHAR(6)
,HHMID CHAR(5)
,Tab CHAR(4)
,FieldNo CHAR(4)
,FieldRowCHAR(10)
[code]....
View 29 Replies
View Related
Aug 18, 2015
I have the following stored proc that I need to pull InsuranceID specific rows when @InsuranceID > 0 is sent. Below is the code and I think the issue is in the 2nd WHERE condition.
ALTER PROCEDURE [dbo].[ms_selJobSetupSelections]
(@ActiveOnlybit = 1,
@InsuranceIDint = 0)
AS
BEGIN
SELECT J.JobSetupID
,J.JobSetupText
[code]....
View 21 Replies
View Related
Oct 22, 2015
(select SUM(sales.Total) from sales where StudentHist.Curdate = max(sales.curdate)) AS 'Balance'Iam trying to write a subquery to calculate the total amount of sales until the Curdate in studenthist equals the Curdate in sales table..how to write this query??
View 11 Replies
View Related
Apr 27, 2015
I have a table which is called PneumoniaCareBundleDiagnosisCodes with the fields DiagnosisCode, DiagnosisDesc
I have a another table called dbo_OP_APPOINTMENT_PROCEDURE_PIVOT
With fields Procedure01, Procedure02, Procedure03, Procedure04, Procedure05, Procedure06, Procedure07, Procedure08, Procedure09, Procedure10, Procedure11, Procedure12.
(for info purposes the relationship here is DiagnosisCode = Procedure01, 02, 03 etc)
Is it possible to right a query that shows all records in dbo_OP_APPOINTMENT_PROCEDURE_PIVOT where the DiagnosisCode in table PneumoniaCareBundleDiagnosisCodes appear in any of the Procedure01, 02, 03 fields etc.
If I was using an IF statement the logic i would right it as follows:
IF dbo_OP_APPOINTMENT_PROCEDURE_PIVOT.Procedure01
IS IN PneumoniaCareBundleDiagnosisCodes.DiagnosisCode OR
IF dbo_OP_APPOINTMENT_PROCEDURE_PIVOT.Procedure02
[Code] ......
View 5 Replies
View Related
Jun 10, 2015
I am writing below query to pull from customer table.
select * from Customer where SrNo in (Select distinct SrNo from Orders)
This is doing an exact match of SrNo in Orders table SrNo is part of string and can occur at any place in that string. I want to use the like command.
Please see below example.
select
*
from Customer
where SrNo
like('%89898989%','%928hhst%')
View 2 Replies
View Related
Aug 24, 2015
SELECT A.EmpId,A.IncidentDate
FROM EmployeePoints1 as A
WHERE IncidentDate=
(SELECT MAX(IncidentDate)
FROM EmployeePoints1
WHERE EmpId = A.EmpId) AND (DATEADD(day,28,DATEADD(WEEK, DATEDIFF(WEEK, 0,A.IncidentDate), 0)) < DATEADD(WEEK, DATEDIFF(WEEK, 0,GetDate()), 0)) AND (A.IncidentCode = 'I' OR A.IncidentCode = 'A')
LEFT JOIN EmployeeTotalPoints1 ON EmployeeTotalPoints1.EmpId = A.EmpId
I am trying to left join another table but I got
Incorrect syntax near the keyword 'LEFT'.
View 9 Replies
View Related
Aug 6, 2015
SSMS does not like mine! THis is the error that I receive:
Cannot perform an aggregate function on an expression containing an aggregate or a subquery.
And this is my syntax:
Select
employeeID
,COUNT(case when rehirestatus IN (select rehirestatus from regionalemptable where rtrim(storename) = 'Location1') THEN userID ELSE 0 END) +
COUNT(case when rehirestatus IN (select rehirestatus from globalemptable where rtrim(storename) = 'Location1') Then userID ELSE 0 End)
FROM production
GROUP BY employeeID
ORDER BY employeeID
View 6 Replies
View Related
May 19, 2015
I have a subquery i wanted to add a as a fourth column to my Original Query(is the one below the subquery). How to combine the two queries to one statement?? I tried but was getting an error "Subquery returned more than 1 value "
select
COUNT(*)FreeReduced
from students s join Buildings b on
s.Building_ID = b.Building_ID
where s.Activeness =1 and (Eligibility = 3 or Eligibility =2)
group by building_number,Building_Name
[Code] ....
View 3 Replies
View Related
Jun 30, 2015
I have the following query.
SELECT a.Line_Number as Line_Number,
Cast(a.election_effective_date as DATE) as election_effective_date,
Cast(a.Plan_Year_Effective as DATE) as Plan_year_Effective
FROM (SELECT aa.* FROM TEMP_Validation aa WHERE IsDate(aa.Plan_Year_Effective) = 1 AND IsDate(aa.election_effective_Date) = 1) a
Where Cast(a.election_effective_date as Date) Not Between Cast(a.plan_year_effective as Date)
and DATEADD(DD,-1,DATEADD(YY,1,Cast(a.plan_year_effective as Date)))
There is a malformed date in the Temp data, at line 4932. This is why I created a subquery that checks if the plan year and election effective dates are dates using the "IsDate" function. However, when I execute this I get the error "Conversion failed when converting date and/or time from character string". If I eliminate line 4932 the error no longer occurs. Somehow line 4932 is not being eliminated in the subquery, except if I run JUST the subquery it will not include line 4932. What am I doing wrong on these queries and how can I correctly get the subquery to eliminate the malformed date?
View 5 Replies
View Related
Jul 23, 2015
When I execute the below queries it works perfectly where as my expectation is, it should break.
Select * from ChildDepartment C where C.ParentId IN (Select Id from TestDepartment where DeptId = 1)
In TestDepartment table, I do not have ID column. However the select in sub query works as ID column exists in ChildDepartment. If I do change the query to something below then definately it will break -
Select * from ChildDepartment C where C.ParentId IN (Select D.Id from TestDepartment D where D.DeptId = 1)
Shouldn't the default behavior be otherwise? It should throw error if column doesnt exists in sub query table and force me to define the correct source table or alias name.
create table TestDepartment
(
DeptId int identity(1,1) primary key,
name varchar(50)
)
create table ChildDepartment
(
Id int identity(1,1) primary key,
[Code] ....
View 3 Replies
View Related
Sep 2, 2015
updating the # of Payer from below query to match with the # of rows for each payer record. See the Current and desired results below. The query is currently counting the # of rows for all payers together and updating 3 as # of payers. I need it to count # of rows for each payer like shown inDesired result below. It should be showing 1 for first payer and 2 for 2nd & 3rd based on # of times each payer is repeated..
SELECT b.FILING_IND, b.PYR_CD, b. PAYER_ID, b. PAYER_NAME,a.CLAIM_ICN,
(Select Count(*) From MMITCGTD.MMIT_CLAIM a, MMITCGTD.MMIT_TPL b , MMITCGTD.MMIT_ATTACHMENT_LINK c where a.CLAIM_ICN_NU =
c.CLAIM_ICN and b.TPL_TS = c.TPL_TS and a.CLAIM_TYPE_CD = 'X'
[Code] ....
Current Result
FILING_IND
PYR_CD
PAYER_ID
PAYER_NAME
CLAIM_ICN
#_OF_PAYER
[code]....
View 4 Replies
View Related
Sep 14, 2015
I have 3 tables.
Table 1:
ID Name Description
1 ABc xyz
2 ABC XYZ
Table 2:
RoleID Role
1 Admin
2 QA
Table 3:
ID RoleID Time
1 1 09:14
2 1 09:15
1 2 09:16
Now I want all the records which belongs to RoleID 1 but if same ID is belongs to RoleID 2 than i don't want that ID.From above tables ID 1 belongs to RoleID 1 and 2 so i don't want ID 1.
View 4 Replies
View Related
May 25, 2015
Below is the query in which i want to retrieve another column (exchange rate) from a particular date for the sub query.
Actually PurchaseOrderDet table get records related to purchaseorder but for each row in purchaseorderdet need info from the same table for all rows on a particular date.
how i can achieve this query without using RANK() and other functions.
"SELECT Supplier.Uniid AS SupplierID, Supplier.Name, PurchaseOrder.Uniid AS PurchaseID, PurchaseOrder.OrderNo, PurchaseOrder.FormDate, StockItem.Uniid AS StockID, StockItem.StockCode + N' - ' + StockItem.Description1 AS StockItem,
PurchaseOrderDet.ExchangeRate, PurchaseOrderDet.UnitPrice, PurchaseOrderDet.Discount, SUM(PurchaseOrderDet.OrderQty) AS SumOfOrderQty,
[Code] ....
View 7 Replies
View Related
Apr 26, 2008
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
View 1 Replies
View Related
Jul 20, 2005
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
View 3 Replies
View Related
Mar 6, 2008
I am getting an error as
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
WHERE EmployeeDetails.Empid=1
PLEASE HELP.................
View 1 Replies
View Related
May 14, 2008
Hi,
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar,
RDR1.U_Variety,
(SELECT OITM.U_Variety
FROM OWOR INNER JOIN
WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN
OITM INNER JOIN
OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode
WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity,
OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet,
OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode
FROM OWOR AS t0 INNER JOIN
ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN
RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN
OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode
WHERE (t0.Status <> 'L')
Thanks
Jacquues
View 4 Replies
View Related
Jul 19, 2007
Hi guys,
A have a problem that I need understand.... I have 2 server with the same configuration...
SERVER01:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
********************************
SERVER02:
-----------------------------------------------------
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
Any idea WHY?
SELECT dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao ds_tipo_transacao_movimento ,
dbo.opf_header_operacao.ds_tipo_transacao ds_tipo_transacao_header,
'SD' ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente,
0 vl_entrada_compra_ctro ,0 vl_entrada_compra_premio,
0 vl_entrada_venda_ctro , 0 vl_entrada_venda_premio,
0 vl_saida_compra_ctro, 0 vl_saida_compra_premio,
0 vl_saida_venda_ctro, 0 vl_saida_venda_premio,
0 vl_lucro , 0 vl_prejuizo, 0 vl_naoexec_contrato,
0 vl_naoexec_premio,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_ganho) vl_aprop_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_aprop_perda) vl_aprop_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_ganho) vl_rever_ganho,
sum(dbo.opf_saldo_ctb_opc_flx.vl_rever_perda) vl_rever_perda,
sum(dbo.opf_saldo_ctb_opc_flx.vl_irrf) vl_irrf
FROM dbo.opf_saldo_ctb_opc_flx,
dbo.opf_header_operacao ,
dbo.opf_movimento_operacao
WHERE dbo.opf_saldo_ctb_opc_flx.dt_saldo = '6-29-2007 0:0:0.000'
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_saldo_ctb_opc_flx.no_contrato )
and ( dbo.opf_header_operacao.no_contrato = dbo.opf_movimento_operacao.no_contrato )
and ( dbo.opf_movimento_operacao.dt_pregao = (select (o.dt_pregao) from dbo.opf_movimento_operacao o
where o.no_contrato = dbo.opf_movimento_operacao.no_contrato and o.dt_pregao <='6-28-2007 0:0:0.000' ) )
and (dbo.opf_saldo_ctb_opc_flx.ic_tipo_saldo = 'S')
group by dbo.opf_saldo_ctb_opc_flx.dt_saldo,
dbo.opf_saldo_ctb_opc_flx.cd_indice_opf,
dbo.opf_saldo_ctb_opc_flx.cd_classificacao,
dbo.opf_movimento_operacao.ds_tipo_transacao,
dbo.opf_header_operacao.ds_tipo_transacao ,
ds_status_operacao,
dbo.opf_header_operacao.ds_tipo_opcao ,
dbo.opf_header_operacao.id_empresa,
dbo.opf_saldo_ctb_opc_flx.ic_empresa_cliente
Thanks
Nilton Pinheiro
View 9 Replies
View Related
Apr 30, 2007
Dear Folks,
I'm getting the error with application like this..............
"the transaction log for database "mydatabase" is full.....to find out why space in the log can not be reused, see the log_reuse_wait_desc column in sys databases. "
I've checked with the column, there are totally 3 options.(I've checked with all other databases)
1)checkpoint,
2)log_backup,
3)nothing
what can i choose for this error to be suppressed?
actually there was log_backup option.
please guide me in this regard.........
thanks in advace.
Vinod
View 1 Replies
View Related
Jul 6, 2014
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone)
FROM tablename) + (SELECT COUNT (TimeZone)
FROM tablename
WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
View 6 Replies
View Related
Apr 25, 2007
It's a pretty basic question but I haven't been able to find any examples out there. I dimmed a dataadapter and would like to reuse later in my code (line 3 in the code below). What is the correct syntax to do this? Dim da As New SqlDataAdapter("SELECT * FROM myTable", conn)da.Fill(myDataTable)da.______ ("SELECT * FROM myTable2", conn)da.Fill(myDataTable2)
View 2 Replies
View Related
Jul 10, 2004
Hi,
I am getting the following error:
The SqlParameter with ParameterName '@pk' is already contained by another SqlParameterCollection
If I could work out what code to post I would, but I can say that I am managing my Sql data in my code by caching small arrays of SqlParameter objects as pulled from the database. If I need to update the DB I change the cached SqlParameter and re-insert it. If I perform a SELECT I check the cache first to see if I already have the SqlParameter.
However, currently, I am experiencing the above error when performing a select, then later an update, followed by another update.
Would I be correct in saying that a SqlParameter object can only be used once for a database operation and should be discarded? Would I be correct if I said that the SqlCommand object should be discarded? I am barking up the wrong tree entirely?
Distressed in DBLand,
Matt.
View 2 Replies
View Related
May 1, 2006
I can create a SqlCacheDependency, and link it to a cached item in httpcontext cache. When something change, it will remove the cached item from the cache. I think I have to redo the process when that happens - prepare sql command, create SqlCacheDependency and insert the item into cache. Now I only need a notification from my SQL when something changes in one of my table, I don;t need read anything from db, and I think I should find a way to not recreate the SqlCacheDependency object everytime?
any suggestion?
View 2 Replies
View Related
Dec 15, 2007
Hello, Can I reuse the deleted primary key id? I'm using SQLServer2005. cheers,imperialx
View 6 Replies
View Related
Nov 14, 2006
What is the best code pratice to use do the following code,
SELECT
fo.no as LNum,
fo.name as LName,
sum(CASE fo.docnome WHEN "In" THEN fo.etotal ELSE 0 END) as In1,
sum(CASE fo.docnome WHEN "In2" THEN fo.etotal ELSE 0 END) as In2,
sum(In1+In2)/10 as inDec,
from fo group by fo.no,fo.name order by fo.name
instead of
SELECT
fo.no as LNum,
fo.name as LName,
sum(CASE fo.docnome WHEN "In" THEN fo.etotal ELSE 0 END) as In1,
sum(CASE fo.docnome WHEN "In2" THEN fo.etotal ELSE 0 END) as In2,
((sum(CASE fo.docnome WHEN "In" THEN fo.etotal ELSE 0 END))+sum(CASE fo.docnome WHEN "In2" THEN fo.etotal ELSE 0 END)))/10 as inDec,
from fo group by fo.no,fo.name order by fo.name
I cant use functions and procedures. Is there any better and cleaner way to code this, reusing the calculated values?
View 1 Replies
View Related
Jul 23, 2005
I wonder if there is a solution for this in SQL 2000 (or do I have towait for SQL 2005)?I am currently in the middle of developing a 'Yahoo' style portal whichwill be rolled out in about 20 or so countries. I have set up in SQLServer one database per country. All the portals have the samefunctionality - but show different data.Is it possible to have a single database which holds storedproceedures, functions and views and have the individual countrydatabases use these?Note: I want to avoid using EXEC sp_executesql.I look forward to some good news on this! Thank you in advance.Dadou.
View 2 Replies
View Related
Apr 19, 2008
Hi. I'm starting to try out LINQ to SQL, and so I'm using SQL Express (on Vista) to experiment. My problem is that once I create and delete a database, I can never use the name again. If, after deleting the old database, I try to create another one with the same name (say Acct1), I get "Create failed for Database 'Acct1'. An exception occurred while executing a Transact-SQL statement or batch. The logical file name "Acct1" is already in use. Choose a different name. Error: 1828"
I am trying to create the database in SQL Server Management Studio Express. That database name does not appear in the list of databases: there is only AdventureWorks and the system databases. The .MDF and .LDF files have been deleted. Not just sent to the recycle bin, but permanently deleted.
I have already used up Acct1, Acct2, and Acct3, just to try out different scenarios. Each time, I delete the old database before trying to create a new one with the same name, but I am forced to always supply a new, different name. I have checked the directory with hidden files and system files showing to be sure there is no old file lurking there somewhere.
Is there a way to delete these old "logical file names"? I can't even find any reference to their existence except for the message that says they are already in use.
View 11 Replies
View Related
Nov 26, 2007
I have read the articles posted online concerning different dialog reuse strategies. Most of them create a new table in the sender to hold dialog ids. I was wondering what is wrong, if anything, with the following approach:
Code Block
declare @dlg uniqueidentifier
select top 1 @dlg = conversation_handle from sys.conversation_endpoints where state IN ('CO')
if @dlg is null
begin
begin dialog conversation @dlg
from service [tcp://SFT3DEVSQL01:4022/TyMetrix360Audit/DataSender]
to service '//TyMetrix360Audit/DataWriter','386DDD04-7E55-466A-BE83-37EFC20910B9'
on contract [//TyMetrix360Audit/Contract] with encryption = off;
end
;send on conversation @dlg
message type [//TyMetrix360Audit/Message] (@msg)
Here I simply select a conversation handle directly from the sys.conversation_endpoints table. Can anyone see any issues with this approach?
Thanks in advance....
View 6 Replies
View Related
Jan 3, 2007
I have been working with SQL for quiet a while but think this perhaps is a very basic question that has always escaped me:
At my work I was exposed to both, MS SQL Server 2000 and Sybase Adaptive Server Anywhere/Sybase SQL Anywhere.
Under Sybase I was able to use aliases in other calculations and filters but i have never been able to do the same with SQL.
Example:
In Sybase I can write this:
Select Price * Units as Cost Cost * SalesTax as TotalTaxFrom Invoice Where TotalTax > 3.5
However if i want to do this in MS SQL 2000 i have to go trough
Select
Price * Units as Cost
Price * Units * SalesTax as TotalTax
From Invoice
Where (Price * Units * SalesTax) > 3.5
In the long run this is costing me a lot of code redundancy, not to mention a debugging nightmare. Is there a way to replicate this alias usage in MS SQL Server?
View 3 Replies
View Related
Jun 5, 2007
I am working on a project developing a fairly large number of reports with a team of developers. Many of these reports have common elements and code, such as common headers with user-selectable colors. Additionally, many of the common parts of the reports are at mockup stage currently, and many features will have to be added to the reports as time goes on.
We're attempting to create a generalized framework that will minimize the duplication of effort as we develop these reports, and as we go back and modify or fix them later.
What is the best way to approach this?
My first attempt was to create a report template and base all the reports off of the same template. That was fine for the first pass, but as we need to make changes later, they will not be propagated to the already existing reports.
My second attempt was to have each componant of that template reference a subreport, so that changes to the actual report template will be minimized as we go forward. This works great for minimizeing work, but it appears that you lose many features with the use of subreports, and there seems to be a pretty serious performance impact as well. I have posted about one such issue here: Pagination
If anyone has pointers about how to go about this, and where I should start, they would be greatly apreciated!
View 2 Replies
View Related
Jun 19, 2014
I have a table in which there is a column of type identity(1,1),in the same table i have bulk data, and i have deleted a row from my table, so now i want to reuse that same Id again, how to do that.
View 3 Replies
View Related
Mar 4, 2008
Hello,
I have an ID column which is an Identity column, and it counts from 1 upwards.
If I have 10 records, I have ID's number 1 to 10.
If I then add another record, it will give the ID number 11.
Imagine I then delete ID number 9
Is it possible to get the next record I create to take number 9 instead of 12 ?
View 5 Replies
View Related
