In the above example, I want to swap Value 202 and 203 but its not straight forward. I want to swap in a way that, I need to group by Name column and check if 203 comes first in the group then swap else don't.
In the above example, I need to swap the values for name2 but not for name1. Below query is performing a straight forward swap.
UPDATE TblTest SET Value = CASE WHEN Value =202 THEN203 ELSE202 END
I need to swap two rows in a table so that i can give the user a choice to move the row data up and down. The top and bottom row values may not be in the serial order. I am using MS Sql 2000. Is there any way to do that or its really difficult big process. I really stuck with this problem can you help me out, please friends.. Your help will greatly appreciated.. Thank you very much
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2 select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB] GO /****** Object: Trigger Script Date: 24/07/2015 3:41:38 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV) 1X 1Y
Results Table(SQL) CreatedDate Message 2015-08-04 08:45:29.203 successfully inserted value 1X 2015-08-04 08:44:29.103 TEst pass 2015-08-04 08:43:29.103 successfully inserted value 1X 2015-08-04 08:42:29.203 test point 2015-08-04 08:35:29.203 successfully inserted value 1Y 2015-08-04 08:30:29.203 Test Pass 2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output: All values from values table are inserted successfully Total count of values inserted: 2 If only few values are inserted, example only 1X from Values table is inserted in Message
Example: Results Table CreatedDate Message 2015-08-04 08:45:29.203 successfully inserted value 1X 2015-08-04 08:44:29.103 TEst pass 2015-08-04 08:43:29.103 successfully inserted value 1X 2015-08-04 08:42:29.203 test point
Output: All values from values are not inserted successfully in result table. Total count of values inserted: 1 Missing Values not inserted in results table are: 1Y
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:- GO ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details] @Class_Id int AS BEGIN
ID Flag TestDate Value Comment 111 2 12/15/2014 7.5 null 222 2 Null 10 received
Matrix_Current table could have 1 or multiple rows as below.
ID Flag TestDate Value Comment 111 2 01/26/2015 7.9 111 2 02/23/2015 7.9 111 2 04/07/2015 6.8 222 1 null 8 test comment 1 222 3 null 9 test comment 2
When I run below update
UPDATE AM SET M.Flag = MC.Flag, M.TestDate = MC.TestDate, M.Value = MC.Value, M.comment = MC.Comment FROM dbo.Matrix M inner join dbo.Matrix_Current MC on M.ID = MC.ID
Matrix table has value below:
ID Flag TestDate Value Comment 111 2 01/26/2015 7.9 222 1 Null 8 test comment 1
I want to update Matrix table from all row from Matrix_Current, final table would like below:
ID Flag TestDate Value Comment 111 2 04/07/2015 6.8 222 3 Null 9 test comment 2
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale. In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD. That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I have a table (can't change the schema of it since it is part of an off the shelf app ) that has columns for individuals which I need to extract several pieces of information, essentially Phone, Email Address, etc. See U1 - U6
What is a better way to return this information rather than multiple joins?
I have a table called USERS, some of its records are marked as hiddenRcord, I want to load those records in a custom page in my asp.net webpage with paging enabled, each page contains 10 records.
I use the statement "SELECT Top 10 tableID,userName FROM USERS WHERE (hiddenRecord=0 AND tableID>@tableID)"
The pagination has 5 links (First,2,3,4,Last), I can of course put the last tableID in link number 2, but I don't know how to do it for the links (3,4,Last).
I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
I am using Sql Server 2008 R2.I have a existing query that basically says
Select Top 50 Subscriber_ID, Member_Name, Group_ID from my_table order by rand(checksum(newid()))
However the client now wants to have at least two from each group_id. There are 17 different groups. When I run this as is I get about six of the 17 groups in the results. How can I change this to get at least two results from each group_id?
Copy out all data from a DB table into/across delimited text file(s) ensuring that each text file size is no more than 3MB.Have created a SSIS solution where it achieves this requirement ..well sort of achieves the requirement ... Here it what the current solution (sparing the minute details) does in a nutshell & Problems with it:
1) Created a function (Script below) which finds the maximum row size in bytes in a given DB table & uses it to calculate how many rows can be copied out into a text file without exceeding 3MB size limit.
For instance: A DB table selected had 788 rows in total and this function for this particular table returned a value of 181 rows { select [dbo].[udf_GetRowPartitionNumber](‘<TableName>’)as #ofRowstoPartitionTableby --181} meaning in order to not exceed the requirement of 3MB per text file, we had to copy all the data from DB table across (create) 5 text files {Select CEILING(788
I have a table (temp_Order) wherein I use to insert a temporary order... after inserting the temporary order, when the buyer submits the order,I want to loop through the table and fetch the orders made by the buyer and insert those products on another table (Order)...how can I achieve this? im currently using sqlDataSource...
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10)) insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1') insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2') insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1') insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
I have 3 variables that gets comma separated values. My requirement is to get them into a temporary table with 3 columns and each column should have single value. E.g. if
Declare @SID varchar(max),@CID VARCHAR(MAX),@KID VARCHAR(MAX) Set @SID='1,2,3,4' Set @CID='6,7,8,9' Set @KID='A,BB,CCC,DDDD'
--Now my requirement is to get them in a temp table with 3 column and different rows as per comma separated values in variables.
Now my requirement is to get them in a temp table with 3 columns and different rows (as per number of comma separated values in variables) E.g.
I need write a query for removing duplicates, for Example in my table I have columns
A_ID name id 1 sam 10 2 sam 10 3 sam 10 4 sam 10 5 ccc 15 6 ccc 15 7 ccc 15 8 fff 20 9 fff 20 10 fff 20
So now I have duplicates values in id column so now I need to take only one value of each and delete the remaining. I need to take first id value 10,15,20 so only 3 rows should be there in my table.
ID (int, identity) Name (nvarchar(255)) Block (nvarchar(50)) Street (nvarchar(255)) Floor (nvarchar(50)) Unit (nvarchar(50)) Address1 (nvarchar(255)) Address2 (nvarchar(255))
I want to iterate through the table and populate Address1 as [Block] [Street] #[Floor]-[Unit].If the 'Floor' field contain a number < 10 (e.g., '8'), I want to add a '0' before it (e.g., '08'). Same for Unit.How would I do this using cursors (or other recommended method)?
