Transact SQL :: How To Use A Between In Case Statement For Joining 2 Tables
Jul 27, 2015
below is the sql query i am trying to write and i receive an error saying Incorrect syntax near the keyword 'Between'.
Update dbo.Claims_Primary_Adjuster_Test_Sujith
SET
Claims_Primary_Adjuster_Test_Sujith.Supervisor = Claims_Internal_Transfer.Supervisor,
Claims_Primary_Adjuster_Test_Sujith.Office = Claims_Internal_Transfer.Office,
Claims_Primary_Adjuster_Test_Sujith.Specialty = Claims_Internal_Transfer.Specialty
from dbo.Claims_Primary_Adjuster_Test_Sujith
Left Outer Join Stg.HS_DW_RV_ClaimsON Claims_Primary_Adjuster_Test_Sujith.Claim_Number = HS_DW_RV_Claims.ClaimNumber
[code]....
how to modify my code such that it works for my condition?
View 10 Replies
ADVERTISEMENT
Sep 28, 2015
What I am working with unfortunately is a very poorly designed and non-normalized database. Please don't criticize the design. I didn't design it, but I have to write queries against it.I have 2 tables. 1 is called EnterVolume. The other is ExitVolume. Similar columns exist in each.
CREATE TABLE [EventPortion].[EventEnterVolume](
[SequenceNumber] [int] NULL,
[TrialID] [nvarchar](255) NULL,
[TimeOfEvent] [int] NULL,
[UniversalTime] [nvarchar](255) NULL,
[SBOINumber] [int] NULL,
[SEntityPosUpdateIndex] [int] NULL,
[VolumeIndex] [int] NULL,
[code]....
The rules of the database state that for every EnterVolume row (for a given TrialID, SBOINumber, and OwnerBOI) there must be a corresponding ExitVolume row in the ExitVolume table.What I need to do is to capture the paired TimeOfEvent entries from each table for each paired row. Nothing says that an SBOI cannot enter and exit a OwnerBOI's volume several times during the same Trial.Every time a SBOI Enters an OwnerBOI's volume during a certain trial, a row is created in the EnterVolume table. And Likewise when Exiting a OwnerBOI's volume during a certain trial, a row is created in the ExitVolume table.
So here is a query that I attempted, but gave undesirable results:
SELECT EV.TimeOfEvent AS [Enter Time], XV.TimeOfEvent AS ExitTime
FROM IntegratedTest1.EventPortion.EventEnterVolume AS EV INNER JOIN
IntegratedTest1.EventPortion.EventExitVolume AS XV ON EV.TrialID = XV.TrialID AND EV.SBOINumber = XV.SBOINumber AND EV.OwnerBOI = XV.OwnerBOI
Here is some sample data:
EnterVolume
TrialID SBOI OwnerBOI TimeOfEvent
1 A D 5
1 A D 2000
[code]....
View 8 Replies
View Related
Jun 29, 2006
I have created a join statement with 3 tables in my database. The join wokers fine but the result is not on the format (Layout) I need it. Here is where I need help. Let me explain what I need to accomplish.
I have 3 tables in my database
1- Rates (Master Table)
Every Prepaid long distance card have a list of countries with individual rates
2- Countries_Template (Child table used to get the country name)
This table is to get copy of a list of countries every time a new card's rate is created
3- Card_Denominations (Child table where I create all the price denominations of each card)
Each cards have multiple cards denominations ($2, $5, $10, $20 and so on) so every time a card is inserted in the Cards table I insert the card denominations on the Card_Denominations table.
The format I need to return from my Query using above 3 tables have to look like this:
Flag Country Rate $2 $5 $10 $20
pic USA .20 500 750 1200 1700
Please help
Tia
Charles
---------Join Statement -----------------
Select Rates.Card_Id, Rates.Country_Id, Rates.Flag, Countries_Template.Country_Name, Card_Denominations.Card_DenominationFrom RatesRight Join Countries_TemplateOn Rates.Country_Id = Countries_Template.Country_IdRight Join Card_DenominationsOn Rates.Card_Id = Card_Denominations.Card_IdWhere Rates.Card_Id = 1
---------------------------------------------
View 1 Replies
View Related
Jan 15, 2015
I have 3 tables that I'm trying to joing together in an SQL statement. I've tried several different JOIN statements, but can't seem to get it to work correctly.
Scenario:
I want all records from TABLE_1
I want to LEFT JOIN TABLE_1 to TABLE_2, but I only want records from TABLE_2 that are an 'Active' STATUS. My problem is, the STATUS field is in TABLE_3.
I have to link TABLE_1 to TABLE_2 by ITEMNUM.
I have to link TABLE_2 to TABLE_3 by ORDERNUM since TABLE_3 does not have ITEMNUM, and pull across the STATUS.
TABLE_1 is an ITEMID table. TABLE_2 is our ORDER_LINE table, and TABLE_3 is our ORDER_HEADER info. I want all items listed; then I'd like to see all items that are on an order (TABLE_2), but only if the ORDER_HEADER (TABLE_3) is an 'ACTIVE' STATUS.
View 10 Replies
View Related
Oct 5, 2015
I am joining on two tables, and returning the values that do not exist in #topoftheline -- well now I see that their are multiple calltimes so I want to return ONLY the most recent call time. What would I change in my syntax to only return that most recent datetime?
Create Table #topoftheline
(
callreceived datetime,
callerfirstname varchar(100),
callerlastname varchar(100),
callnotes varchar(4000)
)
[Code] ...
View 3 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Jan 11, 1999
Wuddup,
I am trying to create a view that encapsulates some specific info from many different tables. I have about 30 tables all with exactly the same field names and field types. I want to take 3 of the fields from every table and put them together into one 'VIEW' so I can run more efficient queries. SQL however, doesn't let you 'combine' 2 columns from different tables into one column in the view. (making sense?)
I tried running a 'UNION' but you are specifically NOT allowed to run a union in a create view statement. Anyone have any ideas?
View 1 Replies
View Related
Sep 25, 2015
I've been beating my head against this for a bit and haven't been able to figure this out I want to pull 1 set of values between a date time range if @Report = '1' but if @Report = 2 or 3 I want it to drop 3 of the parameters so it will pull all items. by dropping the where parameters for @BeginRangeDate and @LookOutDate and L.COLineStatus. My report works great if I go in and run Report 1 with the date parameters in the where statement and also works great for Reports 2, 3 if I REM out those 3 items in the Where statement. Here is what I currently have
CASE@Report
WHEN'1'THEN
WHEREL.RequestedShipDate>=@BeginRangeDate
ANDL.RequestedShipDate<=@LookoutDate
ANDDO.ForecastDate>=@ForecastDate
[Code] .....
View 7 Replies
View Related
Jul 20, 2005
I've always been mistified why you can't use a column alias in the group byclause (i.e. you have to re-iterate the entire expression in the group byclause after having already done it once in the select statement). I'mmostly a SQL hobbiest, so it's possible that I am not doing this in the mostefficient manner. Anyone care to comment on this with relation to thefollowing example (is there a way to acheive this without re-stating theentire CASE statement again in the Group By clause?):Select 'Age' =CaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))end,max(SubmittedOn), COUNT(SCRID) AS NbrSCRsFrom SCRViewWHERE(StatusSort < 90) ANDCustomerID = 8 andUserID = 133group byCaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))endOrder by max(submittedon) descThanks,Chad
View 4 Replies
View Related
Aug 9, 2015
In the below query, I can get the individual/single group by columns as well as multiple but I cannot control the order in which I would like to group by the data.
So lets say I want to group the data by OS->browser->browser_version(just one example) then I cannot achieve that as the order of OS column comes later in the query.
I know one option would be to write a dynamic SQL but i dont want to do that because of performance reasons. Any other way this can be achieved?
select
case when @include_browser =
1 then browser_name end as browser_name,
case when @include_browser_version
= 1 then browser_version end
as browser_version,
[Code] ....
View 4 Replies
View Related
Sep 24, 2015
I use Order By Used with Case Statement and may be this is the reason for which i am getting error
Windowed functions can only appear in the SELECT or ORDER BY clauses.
Here is my complete sql where i use Row_Number function for pagination with sorting.
DECLARE @StartIndex INT
DECLARE @EndIndex INT
DECLARE @SortColumn VARCHAR(MAX)
DECLARE @SortDirection VARCHAR(MAX)
SET @StartIndex = 1
[Code] ....
View 7 Replies
View Related
Oct 20, 2015
Is it possible to combine a CASE statement with two different columns to retrieve data into one result column? In one column it has multiple JobCode, but this needs to be divided. The only way I can see to do this is take the data from another column to get the results.Ex. JobCode - has one code for several job descriptions (there are about 30), but all within this code cannot have the same level of access. So I need to divide them out, and put them in one column for AccessLevel.
JobTitle - has one code for one job, (but there are over 100).I want to pull from both columns to get the results I need to assign appropriate access level in one column.
Case JobCode (they all have same job code, but everyone in this job code should not have same access)
When '45' Then '1' (Principal, Asst. Prin, or any Administrator, Counselors)
When '25' Then '2' (this could be teacher, etc. )
Case JobTitle (this is how access should be)
When '12345' Then '1' (this is Administration only)
[code]....
View 12 Replies
View Related
Nov 11, 2015
I am trying to run the below but I get an error of 'Incorrect syntax ')'' --- I have tried every angle I can think of around the parens to fix this but nothing I do is working.
UPDATE abcdefg
SET [Date] = GETDate(),
[readytogo] =
(
CASE WHEN [customername] NOT IN (Select [customername] from [server].[database].[dbo].[view])
THEN 'Yes'
ELSE
'Needs Verification'
[code]....
View 5 Replies
View Related
Jun 4, 2015
I have used the below update query. However, its updating only the first value. Like its updating AB with volume when c.Type = ABC, similarly for CD. Its not updating based on the 2nd or the next case condition.
Update XYZ Set AB = a.Amt * (CASE WHEN c.Type = 'ABC' THEN (c.volume)
WHEN c.TYPE = 'DEF' THEN (c.volume)
WHEN c.Type = 'GHI' THEN (c.volume)
Else 0
END),
CD = CASE WHEN c.Type = 'MARGIN' THEN '4105.31'
WHEN c.Type = 'ABC' THEN '123.1'
WHEN c.Type = 'DEF' THEN '234.2'
WHEN c.Type = 'GHI' THEN '567.1'
END
from table1 a join table2 b
on a.Cust = b.Customer
join table3 c
on b.account = c.account and b.channel =c.channel
Why its not working properly? But if i use Select statement instead of update query its working properly.
View 18 Replies
View Related
Jul 28, 2015
I am trying to add the letters 'MS' in front of value while using a case statement. If Dispo = 2 I want it to pull back 'Inactive', else I want it to pull back the Value with MS in front (eg. "MS14"). The data in the value column are numbers. Would I use a CONCAT? If so where does that need to go?
Case when dispo = 2 then 'Inactive' else cast(Value as varchar(11)) end ,
View 27 Replies
View Related
Nov 6, 2015
below is my original query
select Value = count(*) from dbo.test
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
View 5 Replies
View Related
May 18, 2015
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else
WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
View 2 Replies
View Related
Jun 22, 2015
I have a table A and lookup table B.
table A:
| ID | FRUIT | VEGETABLE | GOOD |
--------------------------------------------
| 1 | orange | cabbage | no |
| 1 | apple | lettuce | yes |
| 1 | kiwi | broccoli | no |
| 1 | pear | kale | yes |
table B:
| ID | FRUIT | VEGETABLE |
-------------------------------
| 1 | apple | lettuce |
| 2 | pear | kale |
If the fruit and vegetable in table A is found in table B, then set the GOOD column = yes, else no.
This is what I have so far.
update tableA
set GOOD =
(case when tableA.id = C.id then 'yes'
else 'no'
end
)
from
(select tableA.id as id
from tableA A
left join tableB B on B.fruit = A.fruit
and B.vegetable = A.vegetable) C
View 6 Replies
View Related
May 17, 2015
Table Structure
EID COLA COLB
1 name A
1 age 23
1 city hyd
1 email abc@live.in
1 mobile 45126
2 name B
2 age 43
[code]....
how to display the result where any of the mandatory fields (name,age,city,email,mobile)are missing then it should display as that field as Null
View 9 Replies
View Related
Nov 16, 2015
I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.
Store Type Sales
11 A 1000
23 A 1980
23 B 50
5 B 560
I want to filter the store in "where clause" where
1)- if the store has type A and B, then assign only A
2)- if the store has type A associated with it then assign A
3)- if the store has type B associated with it, then assign B.
Select Store, sum(sales), Type
from table1
where (TYPE]= (case when [TYPE] in ('A','B') then 'A'
when [TYPE]='A' then 'A' else 'B'end))
GROUP BY [store], [TYPE]
The above statement is not working for when store has only Type B associated with it.
View 7 Replies
View Related
Aug 6, 2015
I am required to find or check that a specific word exists in string or not.
Suppose I have to find the word 'st' than I need the result true if and only if the following occurrences are there.
1. 'St is valid;' -> true
2. 'DOB is valid;ST is invalid;' -> true
3. 'DOB is valid; ST is invalid;' -> true
4. 'DOB is valid;invalid ST;' -> true
5. 'DOB is valid; invalid ST;' -> true
6. 'DOB is valid; invalid STate;' -> false
Means the exact ST should be search. It is not free text search.
T-SQL is needed to be used in select statement with case using PATINDEX, RegEx or any suitable t-sql command.
View 10 Replies
View Related
Sep 2, 2015
Below is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
View 13 Replies
View Related
Aug 28, 2015
I have a a Group By query which is working fine aggregating records by city. Now I have a requirement to focus on one city and then group the other cities to 'Other'. Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'
From [Output-MarketAnalysis]
Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active'
Group by [City]
Here is the result:
St. Louis 1000
Kansas City 800
Columbia 700
Jefferson City 650
Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'
From [Output-MarketAnalysis]
Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active'
Group by [City]
Here is the result:
St. Louis 1000
Other Missouri City 800
Other Missouri City 700
Other Missouri City 650
Other Missouri City 300
What I would like to see is a result like:
St. Louis 1000
Other Missouri City 2450
View 5 Replies
View Related
May 4, 2015
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies
View Related
Apr 14, 2004
I REALLY need to perform a JOIN and a GROUP BY on a CASE function column alias, but I'm receiving an "Invalid column name" error when attempting to run the query. Here's a snippet:
SELECT NewColumn=
CASE
WHEN Table1.Name LIKE '%FOO%' THEN 'FOO TOO'
END,
Table2.SelectCol2
FROM Table1
JOIN Table2 ON NewColumn = Table2.ColumnName
GROUP BY NewColumn, Table2.SelectCol2
ORDER BY Table2.SelectCol2
I really appreciate any help anyone can provide.
Thanks,
DC Ross
View 5 Replies
View Related
Jan 6, 2005
Hello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
View 4 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Oct 19, 2015
I have a lookup table with 4 levels of codes like follows:
create table #RiskElementCategory(
[RiskElementCategoryCode] [nchar](5),
[RiskElementCategoryCodeDsc [nvarchar](50),
[RiskElementCategoryCode_2] [nchar](5),
[RiskElementCategoryLevel2Dsc] [nvarchar](50),
[Code] ...
Along with some other rows with the same format. I need to join to this table using a RiskElementCode that I get from the Source system. The trick is that it can be at any level, but I don't know which level it is at. So what I have to do is somehow get the correct row from the lookup table based on the code from the source to get the correct level.
So for Example, If i receive the RiskElementCode of 'SSR', that is in column RiskElementCategoryCode_3 so I need the row that has 'NA' for anything after RiskElementCategoryCode_3 where RiskElementCategoryCode_3 = 'SSR'. If i get 'DFR' I need to get the row where RiskElementCategoryCode_4 = 'DFR' since there are no levels deeper than 4 i don't need to check anything else. If I get 'PRR', then I need the row where RiskElementCategoryCode = 'PRR' and code_2, code_3 and code_4 = 'NA'.
So besides getting the correct row based on the code, i need to get the correct row based on the level where the next levels are 'NA'. I should only get 1 row each time.
View 2 Replies
View Related
Apr 29, 2015
I have these two CTE queries, the first one is the existing one which runs fine and returns what we need, the second is a new CTE query which result I need to join in to the existing CTE, now that would be two CTE's can that be done at all?The second query is working on the same table as the first one so there are overlaps in names, and they are the same, only columns I need to "join" is the "seconds" and "AlarmSessions".
;with AlarmTree as (
select NodeID, ParentID, NodeLevel, NodeName,
cast('' as varchar(max)) as N0,
cast('' as varchar(max)) as N1,
cast('' as varchar(max)) as N2,
cast('' as varchar(max)) as N3,
[code]....
View 4 Replies
View Related
Jun 2, 2015
I have a table (can't change the schema of it since it is part of an off the shelf app ) that has columns for individuals which I need to extract several pieces of information, essentially Phone, Email Address, etc. See U1 - U6
What is a better way to return this information rather than multiple joins?
Select
[AccountNumber]
,a.[AccountId]
,[Name]
,[new_LocationID]
,[ws_name]
,[new_BillingManageruserName]
,[new_AreaServiceManName]
[Code] ....
View 3 Replies
View Related
Apr 29, 2015
I have these two queries I would like to join, however the later is a grouped query how can I join it with the first query? Has to be joined on EventId. The second query is a total table scan.
SELECT AH.EventID,
AH.TechnicalAddress, AH.AlarmAlias, AH.AlarmPath as [OrgAlarmPath], AH.AlarmCounter as AlarmCount, AH.EventDateTime as EventTime,
AH.[Priority], AH.AlarmMessage, AH.EventText, AH.CallListName, AH.AlarmReadDate as EndTime,
AH.alh_EventEndedUserRemark as [EndRemark] --, SUM(seconds) here, and AlarmSessions here
FROM AlarmHistory AH
[Code] ...
2)
WHERE ia.EventTypeId = 0
group by ia.EventId
order by EventId desc
View 4 Replies
View Related
Sep 22, 2015
I know people use ROW_NUMBER() function to do the pagination but my below two query is bit complex. Sohow to use pagination there ? I used ROW_NUMBER() OVER(ORDER BY IsNull(A.OEReference, B.OEReference) ASC) as Line in one but not sure am i right or wrong.
IF IsNull(@GroupID,'') = ''
SELECT IsNull(PartGroupName, 'UnMapped') AS PartGroupName,
CASE IsNull(PartGroupName, '')
WHEN '' THEN ''
ELSE IsNull(IsNull(K.GroupID, IsNull(C.PartGroupID,'')),'')
END AS PartGroupID,
[Code] .....
View 6 Replies
View Related
Aug 18, 2007
I have created 3 views, which I then want to join to produce an overall result. The first view returns customer details, along with payment information. The next two views return values only when the customer has purchased extras outside our standard product i.e. if there is no purchase of an extra, then nothing is written to the extra's table. When I join the views together they only return values where data has been matched in all 3 views i.e. extra's have been purchased. Any data that did not match in all 3 view (i.e. no extra's purchased) is either ignored or dropped from the results. So I need my script to return all values even if no data exists in the two extra views.
My scripts are as follows:
Main View
SELECT
CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID,
CUSTOMER_POLICY_DETAILS.HISTORY_ID,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE,
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID,
CUSTOMER_INSURED_PARTY.SURNAME,
SYSTEM_INSURER.INSURER_DEBUG,
SYSTEM_SCHEME_NAME.SCHEMENAME,
CUSTOMER_POLICY_DETAILS.POLICYNUMBER,
--TotalPayable
IsNull(SUM(CASE LIST_TRAN_BREAKDOWN_TYPE.IncludeInTotal
WHEN 1 THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS TotalPayable,
--NetPremium
IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID
WHEN 'NET' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS NetPremium,
--IPT
IsNull(SUM(CASE
WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Premium_Section_ID, 1, 3) = 'TAX' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS IPT,
--Fee
IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID
WHEN 'FEE' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS Fee,
--TotalCommission
IsNull(SUM(CASE
WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID, 4, 4) = 'COMM' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS TotalCommission
FROM
ACCOUNTS_CLIENT_TRAN_LINK
INNER JOIN ACCOUNTS_TRANSACTION
ON ACCOUNTS_CLIENT_TRAN_LINK.TRANSACTION_ID = ACCOUNTS_TRANSACTION.TRANSACTION_ID
INNER JOIN ACCOUNTS_TRAN_BREAKDOWN
ON ACCOUNTS_TRANSACTION.TRANSACTION_ID = ACCOUNTS_TRAN_BREAKDOWN.TRANSACTION_ID
INNER JOIN LIST_TRAN_BREAKDOWN_TYPE
ON ACCOUNTS_TRAN_BREAKDOWN.TRAN_BREAKDOWN_TYPE_ID = LIST_TRAN_BREAKDOWN_TYPE.TRAN_BREAKDOWN_TYPE_ID
INNER JOIN CUSTOMER_POLICY_DETAILS
ON CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_ID AND
CUSTOMER_POLICY_DETAILS.HISTORY_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_HISTORY_ID
INNER JOIN SYSTEM_INSURER
ON CUSTOMER_POLICY_DETAILS.INSURER_ID = SYSTEM_INSURER.INSURER_ID
INNER JOIN SYSTEM_SCHEME_NAME
ON CUSTOMER_POLICY_DETAILS.SCHEMETABLE_ID = SYSTEM_SCHEME_NAME.SCHEMETABLE_ID
INNER JOIN CUSTOMER_INSURED_PARTY
ON ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_HISTORY_ID = CUSTOMER_INSURED_PARTY.HISTORY_ID AND
ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_ID = CUSTOMER_INSURED_PARTY.INSURED_PARTY_ID
WHERE
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE = '2007-08-17' AND
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID <> 'PAY'
GROUP BY
CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID,
CUSTOMER_POLICY_DETAILS.HISTORY_ID,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE,
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID,
CUSTOMER_INSURED_PARTY.SURNAME,
SYSTEM_INSURER.INSURER_DEBUG,
SYSTEM_SCHEME_NAME.SCHEMENAME,
ACCOUNTS_TRANSACTION.Transaction_ID,
CUSTOMER_POLICY_DETAILS.POLICYNUMBER
Add on View 1
CREATE VIEW TOPCARDPA AS
select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'TRPCAE01'
Add on View 2
CREATE VIEW TOPCARDRESC AS
select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'HICRESC01'
Join Result Script
SELECT
TOPCARD.AUTHORISATIONUSER,
TOPCARD.AUTHORISATIONDATE,
TOPCARD.TRANSACTION_CODE_ID,
TOPCARD.SURNAME,
TOPCARD.INSURER_DEBUG,
TOPCARD.SCHEMENAME,
TOPCARD.POLICYNUMBER,
TOPCARD.TotalPayable,
TOPCARD.NetPremium,
TOPCARD.IPT,
TOPCARD.Fee,
TOPCARD.TotalCommission,
TOPCARDPA.SELECTED,
TOPCARDRESC.SELECTED
FROM
dbo.TOPCARD TOPCARD
INNER JOIN dbo.TOPCARDPA TOPCARDPA
ON TOPCARD.POLICY_DETAILS_ID = TOPCARDPA.POLICY_DETAILS_ID AND
TOPCARD.HISTORY_ID = TOPCARDPA.HISTORY_ID
INNER JOIN dbo.TOPCARDRESC TOPCARDRESC
ON TOPCARD.POLICY_DETAILS_ID = TOPCARDRESC.POLICY_DETAILS_ID
AND
TOPCARD.HISTORY_ID = TOPCARDRESC.HISTORY_ID
I have included all the scripts I have used, as others may find them useful, in addition to anyone that is able to provide me with some assistance. Thanks in advance for for the help.
View 2 Replies
View Related
