Transact SQL :: How To Use Multiple Values In Where Condition In Query
Jun 17, 2015
I have a query where i would calculate the counts of three Servers
declare @Managed float
declare @Active float
DECLARE @Values varchar(1000)
SET @Values = 'WE,EE,CO'
select @Managed = count(Name0) from v_R_System where Operating_System_Name_and0 like '%Workstation%'
[Code] ...
Here i need output like below
Workgroup Managed Active
'WE' 255 ,400
'EE' 300 ,450
'CO' 155, 600
So how to use these three values in the where condition when i use the where clause i have put in condition it will give me the subquery returns more than one value,so how should i use this scenario to accomplish this output?
View 3 Replies
ADVERTISEMENT
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
Oct 1, 2015
I have a query that returns the data about test cases. Each test case can have multiple bugs associated to it. I would like a query that only returns the test cases that have all their associated bugs status = closed.For instance here is a sample of my data
TestCaseID TestCaseDescription BugID BugStatus
1 TestCase1 1 Closed
2 TestCase1 2 Open
3 TestCase2 11 Closed
4 TestCase2 12 Closed
5 TestCase2 13 Closed
How can I limit this to only return TestCase2 data since all of that test case's bugs have a status of closed.
View 3 Replies
View Related
May 19, 2015
I'm trying to run something like this:
Select ID, FIRST(forename), FIRST(surname) from table1
GROUP BY ID;
I know First doesn't work in TSQL, I used to use it in Access and now need to run something like that in TSQL. Simply getting unique ID with first forename and surname, cause there are some dupes in a table.
There are records like:
ID forename surname
--------------------------------
1 John Kormack
1 James Dope
2 Erin Dupes
3 Will Hugh
3 Walter Heisenberg
So I want to pull out:
1 John Kormack
2 Erin Dupes
3 Will Hugh
How can I run it in TSQL?
View 6 Replies
View Related
Jul 13, 2015
I need one query:
create table #task(TaskId bigint unique, Name varchar(2000))
insert into #task values(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
insert into #task values(2, 'Text Text Text <<Name>> Text Text Text Text <<Company>> Text Text Text <<Salary>> Text Text Text')
[Code] ....
Now I need to create an inline function who resolve the task name with appropriate values and return me the resolved task name
select * from fn_TaskResolver(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
I try this function but its return multiple rows as i just want to return one row. as I have big data set so i don't want to use scaler or Multi Line function.
create function fn_TaskResolver(@TaskId bigint, @name varchar(2000)
Return table
as
return
[Code] ....
View 5 Replies
View Related
Nov 2, 2015
best way to go about this. My query works great and displays the information I require.
EG all demographic for ED, IP & OP. However if a patient has a record in each of the tables then I get the same info multiple times.
What I'm trying to do is a Select Distint against the entire query (below).
eg Select Distinct * from all below.
DECLARE @StartDate datetime = '01 oct 2015';
DECLARE @EndDate datetime = '30 OCT 2015';
--***OUTPATIENT DQ QUERY***--
SELECT distinct
HEYNo,
NHSNo2,
NHSNo1,
[code]....
View 3 Replies
View Related
Apr 26, 2015
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies
View Related
Apr 21, 2015
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
View 6 Replies
View Related
Sep 28, 2015
In a t-sql 2012, I want to declare variables with multiple values and I am having problems since sql server thinks I am working with numbers when I am really working with character and bit values. Here is a copy of the sql that I am trying to use:
DECLARE @Account varchar(100)
DECLARE @Processed bit
set @Account = '58100,98326,09897'
set @Processed ='0,1'
Thus would you show me what I can do so that the sql server knows that I want the values in the set states above to be varchar or character value for @Account and bit value for @Processed?
View 7 Replies
View Related
Jun 1, 2015
Below is the query for my procedure
ALTER PROC [dbo].[sp_GetInvitationStatusTest]
(
@invited_by NVARCHAR (50)
)
AS
BEGIN
-- SELECT * FROM dbo.Merck_Acronym_Invitations WHERE invited_by=@invited_by
select distinct t1.invited_isid as 'ISID', t1.invited_name as 'NAME',t1.invitation_status as 'STATUS',
[Code] ....
If you look at the where clause i have invited by , i get the desired output if i just provide 1 name in the execution such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj' But my requirement is to make the procedure work with more than one input variable such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj','sujith' now i should get the output for 2 people but if i run this i receive the following error Procedure or function sp_GetInvitationStatusTest has too many arguments specified.
how to make my procedure work with more than 1 input variable?
View 4 Replies
View Related
May 10, 2015
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
View 4 Replies
View Related
Oct 17, 2015
I write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
View 3 Replies
View Related
Sep 22, 2015
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
View 2 Replies
View Related
Jun 7, 2015
Below is the stored procedure i have it works fine if i have 1 value passed to @invited_by but i want to modify but i want this code to be working for multiple inputs .Lets say if i do
exec [dbo].[sp_GetInvitationStatusTest] 'Test1 . I get the desired output but i want this procedure to work for
exec [dbo].[sp_GetInvitationStatusTest] 'Test1,Test2'.
USE [merck_acronyms]
GO
[code]....
View 2 Replies
View Related
Dec 1, 2015
I have this query:
SELECT
ID1,
ID2,
type,
(case when type = '1' then sum(value) else '0' end) as Value1,
(case when type = '3' then sum(value) else '0' end) as Value2,
(case when type <> '1' and type <> '3' then sum(value) else '0' end) as Value3
FROM table1 WHERE ID1 = 'x' and ID2= 'y'
GROUP BY ID1, ID2, Type
Which returns:
ID1 ID2 Type Value1 Value2 Value3
005 11547 0 0.00 0.00 279.23
005 11547 1 15.23 0.00 0.00
005 11547 3 0.00 245.50 0.00
And I want to obtain this result:
ID1 ID2 Value1 Value2 Value3
005 11547 15.23 245.50 279.23
View 5 Replies
View Related
Nov 26, 2015
I am writing a query and have the bulk of it already written.
I am looking at a table that contains customer orders. There is a column named Customer_Order.Status Available values for this column is R, F, H, and C.
I'd like for my query to return all lines that have the value R, F, H.
My where clause is written like this
WHERE CUSTOMER_ORDER.SITE_ID = 'XXX' AND CUSTOMER_ORDER.STATUS = ('R','H','F')
I know I'm missing something....
View 3 Replies
View Related
Jul 21, 2015
CREATE TABLE Test
(
EDate Datetime,
Code varchar(255),
Cdate int,
Price int
);
[Code] ....
Now I have to pass multiple param values to it. I was trying this but didnt get any success
exec
[SP_test]'LOC','LOP'
View 10 Replies
View Related
Jun 23, 2015
I have a table like this:
ID Order Date .....
1 Bla 2015-01-13 12:00:45.2713558 .
2 Mio 2015-01-13 12:05:45.2713558 .
3 Tala 2015-01-13 14:00:45.2713558 .
4 Bla 2015-01-13 15:00:45.2713558 .
5 Mio 2015-01-13 20:00:45.2713558 .
6 Bla 2015-01-15 17:00:45.2713558 .
7 Bla 2015-01-15 19:00:45.2713558 .
[code]...
I tryed several things with CASE, IF, EXISTS,... but I had no success.
View 13 Replies
View Related
Aug 31, 2015
I have a table called USERS, some of its records are marked as hiddenRcord, I want to load those records in a custom page in my asp.net webpage with paging enabled, each page contains 10 records.
I use the statement "SELECT Top 10 tableID,userName FROM USERS WHERE (hiddenRecord=0 AND tableID>@tableID)"
The pagination has 5 links (First,2,3,4,Last), I can of course put the last tableID in link number 2, but I don't know how to do it for the links (3,4,Last).
View 3 Replies
View Related
Jul 30, 2015
I'm trying to find it difficult to use recursice CTEs or better solution for a special request below. There are two tables 1) @sizes serves as a lookup or reference for right drive and 2) @test is sample data with different sizes. Assume that I want to evenly distribute the drive letters from table1 to table2 by checking the size available.
E.g.: for the first record in @test; id = 1 where the size is 50 and it fits in Y: drive -- left over space in Y: = 50
id=2, size 2.5, space available from left over = 50 - 2.5 = 47.5 which again fits into Y:
id = 3, size 51, cannot in fit in Y: drive as there is enough space in Y: to allocate (51 > 47.5)
so pick the next drive check on availability again
DECLARE @sizes TABLE (id TINYINT, size DECIMAL(5,2), drive VARCHAR(3))
INSERT INTO @Sizes
SELECT 1,100.00,'Y:'
UNION ALL
SELECT 2,80.85,'Z:'
[Code] ....
-- My output should look like
col1 , val , path
A 50 Y:
B 2.5 Y:
C 51 Z:
D 2.6 Y:
E 52 Z:
F 2.7 Y:
View 5 Replies
View Related
Feb 25, 2015
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
View 7 Replies
View Related
Aug 18, 2015
I am using stored procedure to load gridview,i want to show row specific values in coloumns , as i an working on daily timetable of college and There are three tables Week_Day,Daily_Timetable & Subject.Daily_Timetable has data which has week_day,class_id,Subject_id,Period_No.
Each day has 6 periods and each period is mapped with subject in daily timetable.From below sql i am getting 6 rows of monday.
But i want to show in a row weekname,period1_subject_id(Period_No=1),period2_subject_id(Period_No=2),period3_subject_id.......upto
period6_subject_id.
Please see my query below:-
SELECT Week_Day.Week_Day_name, Subject.Subject_Code, Daily_Timetable.Period_No
FROM Week_Day LEFT JOIN
Daily_Timetable ON Week_Day.Week_Day_Id = Daily_Timetable.Week_Day_Id and Daily_Timetable.Class_Id=6 LEFT JOIN
Subject ON Daily_Timetable.Subject_Id = Subject.Subject_Id order by Week_Day.Week_Day_Id ,Daily_Timetable.Period_No
View 4 Replies
View Related
Sep 1, 2015
I have the following report I need to create with 2 parameters. An equal OR not equal. I need the report to have a drop down that has equal to '1024' or a drop down option that IS NOT equal to '1024'. I also need the WHERE clause to return the equal or not equal based on the user selection inside of SSRS.
SELECT user1 AS [Company], reference AS [PAI_REF], statenumber,
LEFT(user4, 7) AS [Supplier Code],
user4 AS [Company Information],
user8 AS [Transaction Type], user2 AS[Invoice Number],
--CONVERT(VARCHAR,CONVERT(Date, user3, 103),101) AS [Invoice Date],
[routeName] AS [Route], username AS [User Name]
[Code] ....
View 2 Replies
View Related
Sep 17, 2015
I am using a table to store different size numbers for example:
Look at the picture below:
But I want this type of output look at the picture below:
How to sort the query to return greater than zero values to sort up and zeros go down.
I am using sql server 2008.
View 14 Replies
View Related
Oct 26, 2004
I want to know if MS SQL has ability to INSERT multiple values with one statement. For example MySQL is able to do it like so
INSERT INTO myTable (col1,col2,col3)
VALUES
('1','1','1'),
('2','2','2'),
('3','3','3'),
('4','4','4');
and this will insert four rows.
Does MS SQL Have anything similar or do I have to repeat the INSERT statement if I need to generate a dynamic insert?
Thanks,
Lito
View 9 Replies
View Related
Jun 1, 2015
I have following query. Now I want to change this in such a way that if Condition 1 satisfies then it should not go to next condition ,if not then should go to next. Similarly the same format till condition 4.
select * from table where
IND = 'Y'
and
(
(STATE = @STATE and LOB =@LOB and COMPANY=@COMPANY)--Condition 1
OR
(STATE = @STATE and LOB =@LOB)--Condition 2
OR
(STATE = @STATE and COMPANY=@COMPANY)--Condition 3
OR
(STATE = @STATE)--Condition 4
)
View 4 Replies
View Related
Jun 12, 2015
I want the below query to run 24 hours ..once the insert is complete, run again , so on for 24 hours .
there is a way to run every second in as job but i want to run only after run complete ..is there a way to run the query after every complete run ? and keep in job
INSERT INTO [dbo].[Audit_Active]
([SPID],[LoginName],[HostName],[ProgramName],[Command],[LastQuery],[DBName],[ServerName])
SELECT
--DISTINCT
p.SPID,
p.LogiName,
p.HostName,
[Code] ....
View 8 Replies
View Related
Jan 16, 2013
I've got this sql statement that keeps returning the wrong data. (it's related to a previous post, but is different)
Code:
SELECT C.NAME, OL.PART_ID, SL.SHIPPED_QTY
FROM CUSTOMER C
INNER JOIN USERS U ON C.ID = U.ID
INNER JOIN ORDERS O ON C.ID = O.ID
INNER JOIN ORDER_LINE OL ON O.ID = OL.ORDER_ID
[Code] .....
The qry pulls like this: (wrong way)
HTML Code:
company partID Qty
Acme Inc ABC123 3
Acme Inc ABC123 4
Acme Inc ABC123 100
Acme Inc KLM444 3
Acme Inc KLM444 4
Acme Inc KLM444 100
Acme Inc QRP456 3
Acme Inc QRP456 4
Acme Inc QRP456 100
It should be:
HTML Code:
Co. part Qty
Acme Inc ABC123 3
Acme Inc KLM444 4
Acme Inc QRP456 100
The Qty field has duplicates. I've tried various ways, but I cannot make this work.
View 14 Replies
View Related
Apr 27, 2015
Is there any way to update multiple tables in a single query. I know we can write triggers. Apart from triggers, is there any other way available in SQL Server. I am using 2008R2.
View 8 Replies
View Related
Nov 6, 2014
in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
its taking so much of time how t o solve ?
View 1 Replies
View Related
Aug 10, 2014
Is it possible to assign multiple columns from a SQL query to one variable. In the below query I have different variable (email, fname, month_last_taken) from same query being assigned to different columns, can i pass all columns to one variable only and then extract that column out of that variable later? This way I just need to write the query once in the complete block.
DECLARE @email varchar(500)
,@intFlag INT
,@INTFLAGMAX int
,@TABLE_NAME VARCHAR(100)
[code].....
View 1 Replies
View Related
Aug 6, 2015
create table target
(Taid int, studenid int, std int,div int,year int ,ActivityId int)
insert into target values(1,1,1,2015,1),
(1,1,1,2015,2),(1,1,1,2015,3),(1,1,2,2015,1)
,(1,1,2,2015,4) ,(1,1,2,2015,3);
create table activity(ActivityId int,Activity nvarchar)
insert into activity values (1,'sport')
,(2,'swim')
,(3,'read')
,(4,'dace');
I want to edit(update,delete,insert) target table activity from front end for that I took grid view and that grid all activity come of single student studenid(unique key for each student) that you see design below like this
that activity present in target table that come as check in check and that activity not select student from activity activity table that come unchecked
I want to update above information means unchecked alredy check data should delete and new check data add , already check data update
I have use merge statement but problem is that at single time only one row execute that is check because data come from data gridview.
View 5 Replies
View Related
Jul 10, 2015
I am in assumption that we cannot do NULL value comparison in where clause directly (results will not be proper) we have to use ISNULL. Is my understanding correct? Is using ISNULL efficient when we have to this operation for large volume?
View 5 Replies
View Related
