I have the following stored procedure, to insert or update a record and return the id field, however the procedure returns two results sets, one empty if it's a new record - is there a way to supress the empty results set?
ALTER PROCEDURE [dbo].[AddNode]
@Name VARCHAR(15),
@Thumbprint VARCHAR(40),
@new_identity [uniqueidentifier] = NULL OUTPUT
AS
BEGIN
UPDATE dbo.NODES
[Code] ....
I have Table Staffsubjects with columns and Values
      Â
Guid  AcademyId  StaffId  ClassId  SegmentId  SubjectId  Status
 1    500    101     007   101    555      1
 2    500    101     007   101    201      0
 3    500    22     008   105    555      1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and  SegmentId<>@SegmentId and  SubjectId<>@SubjectId
I have wrote the stored procedure to do this, But the problem is If do the update, It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] .....
How can I return results from this SP?
Alter
Procedure sp_Blocking
as
      SET NOCOUNT
ON
truncate
table blocked
[Code] ....
If I create a stored procedure and do not specify a return value or type, why does SSMS show that the stored procedure returns an int in the object explorer? Â Is that simply the success flag?
View 5 Replies View RelatedI am looking out for sample  stored procedures returning multiple records
Example: GetOrderDetailsByOrderId
The above stored procedure should take orderId as parameter and should return the the order details along mutiple line item details.
I have a stored procedure that selects the unique Name of an item from one table.Â
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
I'm having a problem I do an insert into a table but I want to return the value of the identity field of that insert so I can email a confirmation. For some reason this code doesn't work.
Below is the stored procedure I'm calling and below that the code I'm using. What am I doing wrong. The value I have returned is null when it should be a number. Any suggestions. Why does finalMagicNum2 come back null when it should grab the identity field of the inserted record.
CREATE PROCEDURE addMagicRecTest
(
@theSequence int,
@theSubject int,
@theFirstName nvarchar(50)=null
@theLastName nvarchar(75)=null
)
AS
INSERT INTO employees([Sequence],subject,firstname,lastname)
VALUES(@theSequence,@theSubject,@theFirstName,@theLastName)
SELECT @@identity AS finalNum
magicDataConnect = ConfigurationSettings.AppSettings("myDataConnect")
Response.Write(magicDataConnect)
magicCommand = New SqlDataAdapter("addMagicRecTest", magicDataConnect)
magicCommand.ConnectionType = CommandType.StoredProcedure
magicCommand.SelectCommand.CommandType = CommandType.StoredProcedure
' Sequence ID for request
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSequence", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSequence").Value = "41833"
' Subject for new Wac Ticket
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theSubject", SqlDbType.NVarChar, 8))
magicCommand.SelectCommand.Parameters("@theSubject").Value = "1064"
' First Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theFirstName", SqlDbType.NVarChar, 50))
magicCommand.SelectCommand.Parameters("@theFirstName").Value = orderFirstName
' Last Name Field
magicCommand.SelectCommand.Parameters.Add(New SqlParameter("@theLastName", SqlDbType.NVarChar, 75))
magicCommand.SelectCommand.Parameters("@theLastName").Value = orderLastName
DSMagic = new DataSet()
magicCommand.Fill(DSMagic,"employees")
If DSMagic.Tables("_smdba_._telmaste_").Rows.Count > 0 Then
finalMagicNum2 = DSMagic.Tables("_smdba_._telmaste_").Rows(0)("finalMagic").toString
End If
I need finalMagicNum2
Dear all,
I am using C# , asp.net and sql server 2005.
Let me explain the situation.
I have written procedure to insert data into the table and return last inserted value by @@identity variable. Now my question is how do I execute this process so that I can
Get last inserted variable values
Please help
thanks
I have a stored procedure in which I'll select some rows based on a condition and I need to update the status of those rows within the same stored procedure.For e.g.
Create Procedure [dbo].[myProcedure] As  BEGIN  BEGIN TRAN T1  SET NOCOUNT ON  SELECT TOP 5 * INTO #TempTable FROM myTable WHERE ENABLED = 1 AND FetchDate<=GetDate();  UPDATE myTable SET [Status] = 'Locked' From myTable Inner Join on #TempTable myTable.id = #TempTable.id;  SELECT * FROM #TempTable;  DROP Table #TempTable;  COMMIT TRAN T1  END
The Stored Procedure works fine when I debug in SQL. I'm accessing the StoredProcedure through C# like this.
private ProcessData[] ReadFromDb(string StoredProcedure, SqlConnection Connection) {        List<ProcessData> Data = new List<ProcessData>(); SqlCommand Command = new SqlCommand(StoredProcedure, Connection); Command.CommandType = System.Data.CommandType.StoredProcedure;  try        {          Command.CommandTimeout = CONNECTION_TIMEOUT; Â
[code]....
The problem is I'm getting the required rows in C# but the update query in stored procedure is not working.
I'm doing this more as a learning exercise than anything else. I want to write a stored procedure that I will pass a key to it and it will look in the database to see if a row exists for that key. If it does, then it needs to update the row on the DB, if not, then it needs to insert a new row using the key as an indexed key field on the database.for starters can this even be done with a stored procedure?if so, can someone provide some guidance as to how?thanks in advance,Burr
View 5 Replies View RelatedI am trying to take some SQL queries written by Visual Studio, one insert and one update and combine them into a single stored procedure. The insert procedure should be included in the update procedure and a check should be done for an existing record based upon the primary key. If it exist, an update command should be performed, else an insert. I also need to wrap the procedure in a transaction and rollback if any errors have occurred, else commit the transaction. If I have the following Insert and Update statements, can anyone help me write the stored procedure I need? Again, the current statements were automatically created and could be modified as needed.
INSERT INTO tblClub(ClubPKID, ClubName) VALUES (@ClubPKID, @ClubName); SELECT ClubPKID, ClubName FROM tblClub WHERE (ClubPKID = @@IDENTITY)
UPDATE tblClub SET ClubPKID = @ClubPKID, ClubName = @ClubName WHERE (ClubPKID = @Original_ClubPKID) AND (ClubName = @ClubName); SELECT ClubPKID, ClubName FROM tblClub WHERE (ClubPKID = @ClubPKID)
Thanks!
Hi:
I am trying to write a stored procedure that when passed a name, value it will
1. update the record if the name exists
2. create a new record if it doesnt
how would i do this?
HI,
I€™m trying to do a Stored Procedure (SP) that stores data from a form in ASP.NET.
If the record does not exist, it will create a new record first.
This is my first SP, so if best practise is done another way, I would like to hear about it.
Code:
Code Snippet
CREATE PROCEDURE dbo.StorUserRecord
/* some of these are for future use */
@UpdateMetode Int,
@UserIndex Int,
@UserFirstName NVarChar,
@UserLastName NVarChar,
@UserPassword NVarChar,
@UserPrivateMail NVarChar,
@UserCompanyMail NVarChar,
@UserTitle Int,
@UserSecLevel NVarChar,
@UserAddressLine1 NVarChar,
@UserAddressLine2 NVarChar,
@UserZipCode Int,
@UserPrivateMobilNumber NVarChar,
@UserCompanyMobilNumber NVarChar,
@UserHomeNumber NVarChar,
@UserCompanyDirectNumber NVarChar,
@UserCPR NVarChar,
@UserWorkerID NVarChar,
@UserDepartment Int,
@UserActive Bit,
@UserAccess Bit,
@UserDeleted Bit
AS
BEGIN
DECLARE @UseThisUserIndex Int;
IF NOT @UserIndex > 0
/* Create new record and return the "auto id" from UserIndex */
BEGIN
INSERT INTO [User] (UserFirstName) VALUES (@UserFirstName)
OUTPUT INSERTED.UserIndex
INTO @UseThisUserIndex
GO
END
ELSE
/* Use the "auto id" from the @UserIndex */
BEGIN
@UseThisUserIndex = @UserIndex
END
END
RETURN
I'm getting this error:
Msg 102, Level 15, State 1, Procedure StorUserRecord, Line 33
Incorrect syntax near 'OUTPUT'.
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'ELSE'.
Hello,
Basically i want to have a stored procedute which will do an insert statement if the record is not in the table and update if it exists.
The Id is not autonumber, so if the record doesn't exists the sp should return the last id+1 to use it for the new record.
Is there any example i can see, or somebody can help me with that?
Thanks a lot.
How could I possibly write a SP for Insert, Update and Delete for the below tables under this condition. On some conditions they need to be queried, initially for Insert, first the data should be inserted to PROFILES table and then to ROLES table. When inserting, if an entry is new then it should be added to both the tables. Sometimes when I make an entry which is already present in PROFILES table, then in this case the value should be added to the ROLES table. And a delete query to delete rows from both the table.
CREATE TABLE PROFILES(
USER_ID varchar(20) UNIQUE NOT NULL,
Name varchar(40) NULL,
Address varchar(25) NULL
[code]...
Hi all,can somebody help to write this stored procedure Table1 Table2LogID MigIDUserMove LogIDUserNew Domain User The two tables are inner join with LogID.If in Table2 LogID=NULL then create new dataset in Table1 (INSERT)and then Update LogID in Table2IF in Table2 LogID= 2 (or something else) then update the dataset in Table1 with the same LogID Thanks
View 1 Replies View Relatedany stored procedure guru's around ?
I'm going nuts around here.
ok basically I've create a multilangual website using global en local
resources for the static parts and a DB for the dynamic part.
I'm using the PROFILE option in asp.net 2.0 to store the language preference of visitors. It's working perfectly.
but Now I have some problems trying to get the right inserts.
basically I have designed my db based on this article:
http://www.codeproject.com/aspnet/LocalizedSamplePart2.asp?print=true
more specifically:
http://www.codeproject.com/aspnet/LocalizedSamplePart2/normalizedSchema.gif
ok now let's take the example of Categorie, Categorie_Local, and Culture
I basically want to create an insert that will let me insert categories into my database with the 2 language:
eg.
in categorie I have ID's 1 & 2
in culture I have:
ID: 1
culture: en-US
ID 2
culture: fr-Be
now the insert should create into Categorie_Local:
cat_id culture_id name
1 1 a category
1 2 une categorie
and so on...
I think this thing is only do-able with a stored procedure because:
1. when creating a new categorie, a new ID has to be entered into Categorie table
2. into the Categorie_local I need 2 rows inserted with the 2 values for 2 different cultures...
any idea on how to do this right ?
I'm a newbie with ms sql and stored procedures :s
help would be very very appreciated!
thanks a lot
All:
I have created a stored procedure on SQL server that does an Insert else Update to a table. The SP starts be doing "IF NOT EXISTS" check at the top to determine if it should be an insert or an update.
When i run the stored procedure directly on SQL server (Query Analyzer) it works fine. It updates when I pass in an existing ID#, and does an insert when I pass in a NULL to the ID#.
When i run the exact same logic from my aspx.vb code it keeps inserting the data everytime! I have debugged the code several times and all the parameters are getting passed in as they should be? Can anyone help, or have any ideas what could be happening?
Here is the basic shell of my SP:
CREATE PROCEDURE [dbo].[spHeader_InsertUpdate]
@FID int = null OUTPUT,@FLD1 varchar(50),@FLD2 smalldatetime,@FLD3 smalldatetime,@FLD4 smalldatetime
AS
Declare @rtncode int
IF NOT EXISTS(select * from HeaderTable where FormID=@FID)
Begin begin transaction
--Insert record Insert into HeaderTable (FLD1, FLD2, FLD3, FLD4) Values (@FLD1, @FLD2, @FLD3,@FLD4) SET @FID = SCOPE_IDENTITY(); --Check for error if @@error <> 0 begin rollback transaction select @rtncode = 0 return @rtncode end else begin commit transaction select @rtncode = 1 return @rtncode end endELSE
Begin begin transaction
--Update record Update HeaderTable SET FLD2=@FLD2, FLD3=@FLD3, FLD4=@FLD4 where FormID=@FID;
--Check for error if @@error <> 0 begin rollback transaction select @rtncode = 0 return @rtncode end else begin commit transaction select @rtncode = 2 return @rtncode end
End---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks,
Blue.
Hi All,
As known its recommended to use stored procedures when executing on database for perfermance issue. I am thinking to create 4 stored procedures on my database (spSelectQuery, spInsertQuery, spUpdateQuery, spDeleteQuery)
that accept any query and execute it and return the result, rather than having a number of stored procedures for all tables? create PROCEDURE spSelectQuery
(
@select_query nvarchar(500)
)
as
begin
exec sp_executesql @select_query, N'@col_val varchar(50) out', @col_val out
end
Is this a good approach design, or its bad???
Thanks all
I have Table Staffsubjects
with columns and Values
Guid AcademyId StaffId ClassId SegmentId SubjectId Status
1 500 101 007 101 555 1
2 500 101 007 101 201 0
3 500 22 008 105 555 1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] ....
I have to control my business rules in a Instead of Insert, Update Trigger.
Since the Control Flow is quite complicated I wanted to break it into stored procedures that get called from within the trigger.
I know that Insert Statements embedded in a Instead of Trigger do not execute the Insert of the trigger you are calling.
But... If I embed stored procedures that handle my inserts in the Instead of Insert trigger call the trigger and put in a endless loop or are the stored procedure inserts treated the same as trigger embedded inserts.
I have one stored procedure for insert, update and delete operations, I need automatically logged the insert,update and delete operations.
How can I set auto logged mechanism and how can I access the logs in c#?
Thanks
Hi,
I'm reasonably new to ASP.NET 2.0
I'm in my wizard_FinishButtonClick event, and from here, I want to take data from the form and some session variables and put it into my database via a stored procedure. I also want the stored procedure to return an output value. I do not need to perform a select or a delete.
For the life of me, I can't find a single example online or in my reference books that tells me how to accomplish this task using a SqlDataSource control. I can find lots of examples on sqldatasources that have a select statements (I don't need one) and use insert and update sql statements instead of stored procedures (I use stored procedures).
I desperately need the syntax to:
a) create the SqlDataSource with the appropriate syntax for calling a stored procedure to update and/or insert (again, this design side of VS2005 won't let me configure this datasource without including a select statement...which I don't need).
b) syntax on how to create the parameters that will be sent to the stored procedure for this sqldatasource (including output parameters).
c) syntax on how to set the values for these parameters (again...coming from form controls and session variables)
d) syntax on how to execute, in the code-behind, the stored procedure via the sqldatasource.
If anybody has sample code or a link or two, I would be most appreciative.
Thank you in advance for any help!
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
I have a stored proc which evaluates a table of 'tasks' to return the task with the highest priority for a given user - at the same time, once that task has been found - I want to allocate that user to the task.Â
I have created a stored proc that works...however I'm sure this requirement /pattern is common & I would like some best practice for this pattern of update and select within a transaction.
Here is some sample data:
use tempdb;
go
if OBJECT_ID('Tasks', 'U') is not null
drop table tasks;
go
create table tasks (
TaskId int identity primary key,
[Code] ....
And here's what my current stored proc looks like;
if OBJECT_ID('pGetNextTask', 'P') is not null
drop proc pGetNextTask;
go
create proc pGetNextTask (
@UserID char(10),
@TaskID int output
)
[Code] ....
I use new query to execute my store procedure but didnt return any value is that any error for my sql statement??
USE [Pharmacy_posicnet]
GO
/****** Object: StoredProcedure [dbo].[usp_sysconf] Script Date: 22/07/2015 4:01:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[usp_sysconf]
[Code] ....
I would like to INSERT an array of integer into a table in MSSQL Server, then count the number of rows in the table with c++ using ODBC. Here you find my code to do this task:
#include <windows.h>
#include <stdlib.h>
#include <stdio.h>
#include<tchar.h>
#include <sql.h>
#include <sqlext.h>
#include<sqltypes.h>
[Code] ....
In my code, I would like to Insert the array and then count the number of rows:
SQLTCHAR Statement[] = _T("INSERT INTO information1(Wert1,Wert2) VALUES(?,?) select count(*) as a from information1 ") ;
Problem : My expectation is, that first 9 rows are inserted into table then comes 9 as result to user (if the table is empty) but this code returns me 1 if first the table is empty. If the table is not empty, it returns 1+number of  existing rows in the table. If I take a look inside the table, the 9 rows are successfully inserted in it. Only the number of rows in the table is wrong.
Hint : If I monitor the database using SQL Profiler. It looks like this:
Why this statement doesn't work correctly?
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View Relatedhi all, lets say i have this insert command being executed from C# to a SQL Db. //store transaction log
SqlCommand cmdStoreTrans = new SqlCommand("INSERT into Transactions(ImportID,ProfileID,RowID) values (@ImportID,@ProfileID,@RowID);",conn);
cmdStoreTrans.Parameters.Add("@ImportID",importId);
cmdStoreTrans.Parameters.Add("@ProfileID",profileId);
cmdStoreTrans.Parameters.Add("@RowID",i);
try
{
conn.Open();
cmdStoreTrans.ExecuteNonQuery();
conn.Close();
}
catch(SqlException ex)
{
throw(ex);
}I need the new Identity number of that record added. how can i get that within THIS Sqlcommand. Currently im closing the connection, creating a new command with 'SELECT MAX(id) from transactions" and getting the value that way, im sure there is a easier way keeping it all within one command object? someone mentioned using something liek @@Identity any help appreciatedTIA, mcm
I want to update a field and in this field insert a increment count, for example:
When I make, "Select * from Users order by User" displays:
User1 Â | Â NULL
User1 Â | Â NULL
User1 Â | Â NULL
User2 Â | Â NULL
User2 Â | Â NULL
and I want to do this:
User1 Â | Â 1
User1 Â | Â 2
User1 Â | Â 3
User2 Â | Â 1
User2 Â | Â 2
how to do this?
Hi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
View 3 Replies View Related