Transact SQL :: Insert Constant Value Along With Results Of Select Into Temp Table?
Dec 4, 2015
I'm trying to fill a temp table whose columns are the same as another table plus it has one more column. The temp table's contents are those rows in the other table that meet a particular condition plus another column that is the name of the table that is the source for the rows being added.
Example: 'permTable' has col1 and col2. The data in these two rows plus the name of the table from which it came ('permTable' in this example) are to be added to #temp.
Data in permTable
col1 col2
11, 12
21, 22
Data in #temp after permTable's filtered contents have been added
TableName, col1 col2
permTable, 11, 12
permTable, 21, 22
What is the syntax for an insert like this?
View 2 Replies
ADVERTISEMENT
Jun 17, 2015
I pulled some examples of using a subquery pivot to build a temp table, but cannot get it to work.
IF OBJECT_ID('tempdb..#Pyr') IS NOT NULL
DROP TABLE #Pyr
GO
SELECT
vst_int_id,
[4981] AS Primary_Ins,
[4978] AS Secondary_Ins,
[code]....
The problems I am having are with the integer data being used to create temp table fields. The bracketed numbers on line 7-10 give me an invalid column name error each. In the 'FOR', I get another error "Incorrect syntax near 'FOR'. Expecting '(', or '.'.". The first integer in the "IN" gives me an "Incorrect syntax near '[4981]'. Expecting '(' or SELECT". I will post the definitions from another effort below.
CREATE TABLE #Pyr
(
vst_int_idINTEGERNOT NULL,
--ivo_int_idINTEGERNOT NULL,
--cur_pln_int_idINTEGERNULL,
--pyr_seq_noINTEGERNULL,
[code]....
SQL Server 2008 R2.
View 3 Replies
View Related
Jul 10, 2015
DECLARE @Query varchar(8000)
Create Table
#tempCountRichard (Status varchar(50), Number Varchar(1000)
Set @Query = 'Insert Into #tempCountRichard
Select Count(Status),
[code]...
With the following SQL. When I select from the temp table I return the right count but my second column doesn't return anything.
Count Status
1010 2000
1111 2222
When I run the query that is being inserted into the the temp table I return the correct results
Count Status
1010 Pass
2000 Pass with Obs
1111 Fail
2222 None
how to select the data from the temp table exactly the same way it was inserted. As I need to select the exact same data from the insert.
View 23 Replies
View Related
Oct 5, 2015
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
View 3 Replies
View Related
Sep 15, 2015
How do I do a bulk insert into a temp table from a text file. Text file looks like that:
ver_id TYPE
E57AB326-803C-436E-B491-398A255C919A 58
34D2A601-6BBA-46B1-84E1-3A805FDA3812 58
986E140C-62F1-48F1-B428-3571EBF00DA0 58
My statement looks like this:
CREATE TABLE [dbo].[tblTemp]([ver_id] [nvarchar](255), [TYPE] [smallint])
GO
BULK INSERT [dbo].[tblTemp]
FROM 'C:v2.txt'
I keep receiving errors.
The error I receive is: Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (TYPE).
View 2 Replies
View Related
Jul 21, 2015
I have the following UNION ALL query with SELECT INTO @tblData temp table. I would like to confirm if my query is correct.
In my first SELECT statement, I have INSERT INTO @tblData.
Do I need another INSERT INTO @tblData again in my second SELECT statement after UNION ALL?
DECLARE @BeginDate as Datetime
DECLARE @EndDate as Datetime
SET @BeginDate = '7/1/2015'
SET @EndDate = '7/13/2015'
DECLARE @tblData table
[Code] ....
View 3 Replies
View Related
May 12, 2015
I am using SQL SERVER 2008R2, not Denali, so I cannot use OFFSET FETCH Clause.
In my stored procedure, I am doing a SELECT INTO #tblTemp FROM... Working fine. This resultset is going to be used in an SSIS package which will generate a pipe-delimited .txt file... Working fine.
For recoverability sake, I am trying to throttle back on the commit chunks to 1000 rows per commit until there are no more rows. I am trying to avoid large rollbacks.
Q: Am I supposed to handle the transactions (begin/commit/rollback/end trans) when the records are being inserted into the temp table? Or when they are being selected form the temp table?
Q: Or can I handle this in my SSIS package for a flat file destination? I don't see option for a flat file destination like I do for an OLE DB Destination (like Rows per batch, Maximum insert commit size).
View 6 Replies
View Related
Feb 18, 2004
What's the best way to go about inserting data from several tables that all contain the same type of data I want to store (employeeID, employerID, date.. etc) into a temp table based on a select query that filters each table's data?
Any ideas?
Thanks in advance.
View 6 Replies
View Related
Jul 20, 2007
Here is the scenario that I cannot resolve
CREATE TABLE [dbo].[tEvents](
[EventID] [int] IDENTITY(1,1) NOT NULL,
[EventName] [varchar](1000) NOT NULL,
CONSTRAINT [PK_tEvent] PRIMARY KEY CLUSTERED
(
[EventID] ASC
)WITH FILLFACTOR = 90 ON [PRIMARY]
) ON [PRIMARY]
CREATE TABLE [dbo].[tEventSelections](
[EventSelectionID] [int] IDENTITY(1,1) NOT NULL,
[EventID] [int] NOT NULL,
[StatusPID] [int] NOT NULL,
CONSTRAINT [PK_tEventSelections] PRIMARY KEY CLUSTERED
(
[EventSelectionID] ASC
)WITH FILLFACTOR = 90 ON [PRIMARY]
) ON [PRIMARY]
then try this
SELECT e.eventName, es.statuspid
INTO #tmpTable
FROM tEventSelections ES
INNER JOIN tEvents E
ON E.EVentID = ES.EventID
INSERT INTO #tmpTable (eventName) values ('Another One')
DROP TABLE #tmpTable
this causes a null insert issue
(0 row(s) affected)
Msg 515, Level 16, State 2, Line 7
Cannot insert the value NULL into column 'statuspid', table 'tempdb.dbo.#tmpTable___________________________________________________________________________________________________________000000000130'; column does not allow nulls. INSERT fails.
The statement has been terminated.
So how do I allow the null, as the not null is coming from the ES table. But I want to allow the insert to happen without having to create the table first, this code works in SQL 2000 but fails in 2005, inserting all fileds into the insert also has it's own issues as some of the fields are delibertly left blank so in some circumstances the data returned to a grid displays correctly.
This method has been used in quite a lot of stored procedures and will be a nightmare to correct if each has to be edited.
One example of the use of is to return a dataset and then add a row at the bottom which is a sum of all the rows.
Regards
View 20 Replies
View Related
Nov 20, 2007
Hi,
I have follwing union query. I want to put this all in a temp table.
select Store_Id,batchnumber
From
Adjustments where updatedDt between '10/30/2007' and '11/20/2007' and Store_id in(8637 ,8641)
group by Store_Id, batchnumber
Union
select DestinationId,b.batchNumber
from
batch b
inner join Carton C on C.Carton_Id = b.General_ID
inner join Document d on d.Document_Id = c.Document_Id
where b.BatchType = 'Warehouse' and b.TranTable = 'Carton'
and (d.DestinationId in (8637 ,8641) ) and c.UpdatedDt Between '10/30/2007' and '11/20/2007'
Union
select d.DestinationId,b.Batchnumber
From
batch b
inner join Document d
on d.Document_Id = b.General_Id
where b.BatchType = 'TransferIn' and b.TranTable = 'Document'
and (d.DestinationId in (8637,8641) ) and d.UpdatedDt Between'10/30/2007' and '11/20/2007'
Union
select d.SourceId,b.batchNumber
From
batch b
inner join Document d
on d.Document_Id = b.General_Id
where b.BatchType = 'TransferOut' and b.TranTable = 'Document'
and (d.SourceId in (8637,8641) ) and d.UpdatedDt Between'10/30/2007' and '11/20/2007'
order by batchnumber
Kindly advice.
Thanks
Renu
View 2 Replies
View Related
May 12, 2015
I have two tables, D and C, whose INTERSECT / EXCEPT values I'd like to insert in the following table I've created
CREATE TABLE DinCMatch (
servername varchar(50),
account_name varchar (50),
date_checked datetime DEFAULT getdate()
)
The following stmt won't work...
INSERT INTO DinCMatch
select servername, account_name from D
intersect
select servername, account_name from C
... as the number of supplied values does not match table definition.
View 2 Replies
View Related
Jul 7, 2005
I'm writing a search engine and I want to make a search and then, after
I've recieved the results, put them into some sort of temporary(in
mememory) table so that I can do another query on that temporary table.
I saw something about temp tables (in T-SQL) in the
help guide, but I still want to know how to do a query on a regular
table and then store those results in a temporary table to perform a
query on that. Could anyone show me some example or something?
View 3 Replies
View Related
Apr 3, 2008
Does anyone know if the results from a query run in QA automatically go into a tempoary table? For instance if ive just run a query that took 5 minutes but it was a normal select query and after it ran i realised i wanted to query the results could i run a simple command to mke a copy of the result set rather than run the original query into a temp table that would then take a few minutes again?
View 1 Replies
View Related
Apr 3, 2008
This may be a dumb question, but I can't seem to get the syntax right. I have two temp tables that have the same columns, I want to do a union on them and store the results in a temp table. Any ideas?
Ie.
select * from #tmpTable1
union
select * from #tmpTable2
into #tmpTable3
Thanks!!!
View 4 Replies
View Related
Nov 21, 2006
The dynamic sql is used for link server. What I need is that the result of the dynamic sql put on a temp table. Can someone help. Im getting an error
CREATE PROCEDURE GSCLink
( @LinkCompany nvarchar(50), @Page int, @RecsPerPage int )
AS
SET NOCOUNT ON
--Create temp table
CREATETABLE #TempTable
( ID int IDENTITY, Name nvarchar(50), AccountID int, Active bit )
INSERT INTO #TempTable (Name, AccountID, Active)
--dynamic sql
DECLARE @sql nvarchar(4000)
SET @sql = 'SELECT a.Name, a.AccountID, a.Active
FROM CRMSBALINK.' + @LinkCompany + '.dbo.AccountTable a
LEFT OUTER JOIN CRM2OA.dbo.GSCCustomer b
ON a.AccountID = b.oaAccountID
WHERE oaAccountID IS NULL
ORDER BY Name ASC'
EXEC sp_executesql @sql
--Find out the first and last record
DECLARE @FirstRec int
DECLARE @LastRec int
SELECT @FirstRec = (@Page - 1) * @RecsPerPage
SELECT @LastRec = (@Page * @RecsPerPage + 1)
--Return the set of paged records, plus an indication of more records or not
SELECT *, (SELECT COUNT(*) FROM #TempTable TI WHERE TI.ID >= @LastRec) AS MoreRecords
FROM #TempTable
WHERE ID > @FirstRec AND ID < @LastRec
Error:
Msg 156, Level 15, State 1, Procedure GSCLink, Line 22
Incorrect syntax near the keyword 'DECLARE'.
View 5 Replies
View Related
Sep 17, 2013
I am try to insert the results from the query into new temp table but keep geeting an error for Incorrect syntax near ')'.
select * into tempCosting
from
(
select top 10* from itemCode itm
where itm.type= 1
)
View 3 Replies
View Related
Oct 13, 2015
I've got a select as follows:
select computer, count(*) as MissedCount from WInUpdates_Neededreq
WHERE LoggedDate BETWEEN DATEADD (DAY, - 5, GETDATE()) AND GETDATE() and LastReportTime !< DATEADD (DAY, -5, GETDATE())
group by computer
I need to make a join onto another table but don't want to lose the coutn(*) as MissedCount.
How can I join to another table and still keep the count form the original table. I want ot join to tblogons.workstationname and return computer from the original query...
View 16 Replies
View Related
Mar 28, 2008
All,
I'm trying to store the results of my store procedure in a temp table. when I try it, I got the error saying...
"Insert exec cannot be nested"
I suspsect this is because I have a Insert Exec statement inside my stored procedure...
Is there any way to come over this issue ?
syntax of my code...
create table #Temp1 (ID int)
insert into #Temp1
EXEC SP1
when I try to run the above code I get the error "Insert exec cannot be nested"
SP syntax :
Create Procedure SP1
as
Begin
create table #Temp2
statements.....
Insert into #temp2
exec SP<Name>
staments.. cont...
END
View 5 Replies
View Related
Aug 20, 2013
Is it possible to return the results of a stored procedure into either a CTE or temp table?
In other words, is it possible to do this:
with someCTE as (
exec someStoredProc
)
or this:
exec someStoredProc into #tempTable
???
View 9 Replies
View Related
Oct 25, 2015
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
View 4 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Jul 24, 2015
Update statement based on the results from this SELECT:
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
RELSP_STATUS_CD
FROM RELEASE_QUEUE WITH (NOLOCK)
[Code] ....
I need to update all records where the
RELEASE_STEPS.RELSP_STATUS_CD = 'SKPD'TORELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
I imagine that the UPDATE statement will be something like:
UPDATE RELEASE_STEPS SET dbo.RELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
WHERE (
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
[Code] .....
View 4 Replies
View Related
Jul 24, 2015
I'm trying to delete the selected data from a table colum from a select statement.
This is the select statement
SELECT RFC822 FROM SQLGOLDMINE.DBO.MAILBOX MB WHERE ((MB.CREATEON >= '2014-07-24' AND MB.CREATEON <= '2015-07-24') OR (MB.MAILDATE >= '2014-07-24' AND MB.MAILDATE <= '2015-07-24')) AND (MB.MAILREF LIKE '%auction notification
& invitation%')
What the delete statement would look like. I've tried replacing Select with delete from but get a sytax error.
View 9 Replies
View Related
Jul 11, 2015
SQL Version: SQL2014
PROBLEM: The SQL insert trigger code below is returning incorrect results. In some cases the results returned are from entirely different fields than those specified as the source field in the SET statement. For instance the value returne for the Price_BeforeAdj field does not = 20000000? It returns a NULL. See code below.
OFFENDING CODE:
ALTER TRIGGER [dbo].[xcti_WIPAdjustments_I]
ON [dbo].[budxcWIPAdjustments]
AFTER INSERT AS
BEGIN
SET NOCOUNT ON;
UPDATE budxcWIPAdjustments
[Code] ....
View 11 Replies
View Related
Oct 12, 2015
In my sp I'm have an Insert statement. In the event that after the insert @@rowcount = 0 I'm throwing an error with RAISEERROR.
This is fine, however, in my CATCH block I'm referencing a local temp table but getting an error that it no longer exists.
My question is, does throwing an error drop any #temp tables? I thought they were in scope for the session?
View 4 Replies
View Related
Jan 21, 2010
What is the best way to drop a temp table if it exists? I am looking something similar to this: if exists (select top 1 * from #TableName) then drop #TableName else end
View 5 Replies
View Related
Jul 20, 2005
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies
View Related
May 20, 2006
Hi all,
I am having a weird problem occur when trying to insert missing records based on an INSERT INTO...SELECT statement.
Basically, I am populating a temporary table with data, then inserting into a main table those records from the temporary table that aren't in the main table. In addition, I am updating those records that are in the main table.
When I call the following SQL, all of the records from the temporary table are inserted even though those records already exist. Bizzarrely the update statement works perfectly.
INSERT INTO
AffiliateCategories (Identifier, AffiliateID, NetworkID, AffiliateCategoryName, NetworkCategoryName)
SELECT
Identifier,
AffiliateID,
1,
AffiliateCategoryName,
NetworkCategoryName
FROM
#TempTradeDoublerCategories
WHERE
#TempTradeDoublerCategories.AffiliateCategoryName NOT IN
(
SELECT
AffiliateCategoryName
FROM
AffiliateCategories
)
I am not sure why it is doing this and it's driving me crazy. If anyone has any ideas why this is happening, or knows of a better way to accomplish this then please let me know.
Are there some issues with string comparisons going on here?
The table that populates the temp table is defined as:
CREATE TABLE [dbo].[Staging_TradeDoubler_Categories](
[id] [int] NULL,
[name] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[merchantName] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[TDCategories_Id] [int] NULL,
[AffiliateID] [int] NULL
) ON [PRIMARY]
Full code listing:
IF OBJECT_ID('tempdb..#TempTradeDoublerCategories') IS NOT NULL
DROP TABLE #TempTradeDoublerCategories
CREATE TABLE #TempTradeDoublerCategories
(
Identifier INT,
AffiliateID INT,
AffiliateCategoryName VARCHAR(255),
NetworkCategoryName VARCHAR(255)
)
INSERT INTO
#TempTradeDoublerCategories (AffiliateCategoryName)
SELECT DISTINCT
CAST(merchantName AS VARCHAR(255)) AS MerchantName
FROM
Staging_TradeDoubler_Categories
ORDER BY
MerchantName
UPDATE
#TempTradeDoublerCategories
SET
#TempTradeDoublerCategories.Identifier = Staging_TradeDoubler_Categories.id,
#TempTradeDoublerCategories.AffiliateID = Staging_TradeDoubler_Categories.AffiliateID,
#TempTradeDoublerCategories.NetworkCategoryName = Staging_TradeDoubler_Categories.[name]
FROM
Staging_TradeDoubler_Categories
WHERE
Staging_TradeDoubler_Categories.merchantName = #TempTradeDoublerCategories.AffiliateCategoryName
UPDATE
#TempTradeDoublerCategories
SET
#TempTradeDoublerCategories.AffiliateID = Staging_TradeDoubler_Affiliates.AffiliateID
FROM
Staging_TradeDoubler_Affiliates
WHERE
#TempTradeDoublerCategories.AffiliateID = Staging_TradeDoubler_Affiliates.TradeDoublerAffiliateID
Print 'Inserting records'
INSERT INTO
AffiliateCategories (Identifier, AffiliateID, NetworkID, AffiliateCategoryName, NetworkCategoryName)
SELECT
Identifier,
AffiliateID,
1,
AffiliateCategoryName,
NetworkCategoryName
FROM
#TempTradeDoublerCategories
WHERE
#TempTradeDoublerCategories.AffiliateCategoryName NOT IN
(
SELECT
AffiliateCategoryName
FROM
AffiliateCategories
)
Print 'Updating records'
UPDATE
AffiliateCategories
SET
AffiliateCategories.AffiliateCategoryName = #TempTradeDoublerCategories.AffiliateCategoryName,
AffiliateCategories.NetworkCategoryName = #TempTradeDoublerCategories.NetworkCategoryName,
DateModified = GETDATE()
FROM
#TempTradeDoublerCategories
WHERE
#TempTradeDoublerCategories.AffiliateCategoryName IN
(
SELECT
AffiliateCategories.AffiliateCategoryName
FROM
AffiliateCategories
)
PRINT 'Dropping table'
IF OBJECT_ID('tempdb..#TempTradeDoublerCategories') IS NOT NULL
DROP TABLE #TempTradeDoublerCategories
View 1 Replies
View Related
Feb 22, 2004
Hi,
I am trying to insert into temp table multiple times and then pull everything out. How would I do that? I get records back, but everything is 0. Why? Here is my stored procedure.
CREATE PROCEDURE sp_SummaryReport
(
@startdate datetime,
@enddate datetime
)
AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #CalcTemp (DataID bigint IDENTITY(1,1) NOT FOR REPLICATION, ReportType varchar(2), Volume int, NetEffect decimal(10,1), GrossEffect decimal(10,1), WeekEndDate datetime)
DECLARE @OnTime decimal(10,1)
DECLARE @UnControlled decimal(10,1)
DECLARE @Volume int
DECLARE @GrossEffect decimal(10,1)
DECLARE @NetEffect decimal(10,1)
DECLARE @WeekEndDate datetime
--ARS AA
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AA')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AA')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AA')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AA',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--ARS AN
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AN')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AN')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AN')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AN',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--ARS AC
SET @OnTime = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ARSScanType = 'D' AND ARSType='AC')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ARSScanType = 'D' AND ARSType='AC')
SET @Volume = (SELECT COUNT(DataID) FROM tblARSData WHERE (tblARSData.WeekEndDate BETWEEN @startdate AND @enddate) AND ARSScanType = 'D' AND ARSType='AC')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblARSData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('AC',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--General
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'GN' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'GN' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'GN' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('GN',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--Odessey
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'OD' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'OD' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'OD' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('OD',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
--General
SET @OnTime = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND OnTimeFlag = 1 AND ReportType = 'HU' AND ScanType='D')
SET @UnControlled = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ControlFlag = 'U' AND ReportType = 'HU' AND ScanType='D')
SET @Volume = (SELECT COUNT(DataID) FROM tblShipData WHERE (tblShipData.WeekEndDate BETWEEN @startdate AND @enddate) AND ReportType = 'HU' AND ScanType='D')
SET @GrossEffect = ((@OnTime/@Volume) * 100)
SET @NetEffect = (((@OnTime + @UnControlled)/@Volume) * 100)
SET @WeekEndDate = (SELECT DISTINCT WeekEndDate FROM tblShipData)
INSERT INTO #CalcTemp(ReportType, Volume, NetEffect, GrossEffect, WeekEndDate)
VALUES ('HU',
@Volume,
@NetEffect,
@GrossEffect,
@WeekEndDate)
SELECTtblListReportType.ReportType AS 'Report Type',
tblListReportType.ReportID AS ReportID,
SUM(#CalcTemp.Volume) AS Volume,
CAST(SUM(#CalcTemp.NetEffect)/COUNT(#CalcTemp.DataID) as decimal(10,1)) AS 'Net % Effective',
CAST(SUM(#CalcTemp.GrossEffect)/COUNT(#CalcTemp.DataID) as decimal(10,1)) AS 'Gross % Effective'
FROM#CalcTemp
INNER JOIN tblListReportType ON LTRIM(RTRIM(LOWER(#CalcTemp.ReportType))) = LTRIM(RTRIM(LOWER(tblListReportType.ReportAbv)))
GROUP BYtblListReportType.ReportType,
tblListReportType.ReportID
END
GO
View 1 Replies
View Related
Nov 3, 2006
i have temp table name "#TempResult" with column names Memberid,Month,Year. Consider this temp table alredy has some rows from previuos query. I have one more table name "Rebate" which also has columns MemberID,Month, Year and some more columns. Now i wanted to insert rows from "Rebate" Table into Temp Table where MemberID.Month and Year DOES NOT exist in Temp table.
MemberID + Month + Year should ne unique in Temp table
View 8 Replies
View Related
Jun 30, 2015
I have a temp table with the following columns and data
drop table #temp
create table #temp (id int,DLR_ID int,KPI_ID int,Brnd_ID int)
insert into #temp values (1,2343,34,2)
insert into #temp values (2,2343,34,2)
insert into #temp values (3,2343,34,2)
[Code]....
I use the rank function on that table and get the following results
select rank() over (order by DLR_ID,KPI_ID,BRND_ID ) Rown,* from #temp
I am interested only in Rown and Id columns. For each Rown number, I need to get the min(ID) in the second column and the duplicate ID should be in 3rd column as shown below.If i have 3 duplicate IDs , I should have 3 rows with 2nd column being the min(id) and 3rd column having one of the duplicate ids in ascending order(as shown in Rown=6)
View 7 Replies
View Related
Apr 7, 2013
I wanted to insert the result-set of a Exec(@sqlcommand) into a temp table. I can do that by using:
Insert into #temp
Exec(@sqlcommand)
For this to accomplish we need to define the table structure in advance. But am preparing a dynamic-sql command and storing that in variable @sqlcommand and the output changes for each query execution. So my question is how to insert/capture the result-set of Exec(@sqlcommand) into a temp table when we don't know the table structure.
View 17 Replies
View Related
Sep 30, 2015
I have an Access app. that I am migrating the DB portion (queries, tables) to SQL server. I need to create a temp table that lasts as long as the user has the Access FE app. open. Idea is that the temp table stores the user's parameters (used for filtering data entry forms and report). The parameters allow the app. to only show the user his data (cannot view other users data). The SP shown below works OK, it creates a ##Temp table and updates it with the parameters sent by Access FE app. The issue I am having is that as soon as the SP finishes the ##Temp table is removed. I thought of using a regular table, but, I am currently testing this migration in my local SQL server instance, as soon as I move the database to production environment, then users will not be able to create tables as permissions are only read/write.
USE [Work_Allocation]
GO
/****** Object: StoredProcedure [dbo].[spUser_Parameters_update] Script Date: 9/30/2015 12:27:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[spUser_Parameters_update]
[code]...
View 10 Replies
View Related
