Transact SQL :: Inserting Exclusion Table Into Existing Code?
Sep 11, 2015
below is some code I use to identify where a patient has attended the ED department whilst also admitted as an Inpatient. This report works fine. However while most of the results are recording issues to be corrected some of them are real and as so can be excluded from the report.
Is there a way I can build in an exclusion table which would include:
SELECT
IP_ADMISSION.HeyNo AS HEYNo
,IP_ADMISSION.NHSNo2 AS NHSNo
,IP_ADMISSION.Forename AS Forename
,IP_ADMISSION.Surname AS Surname
,IP_ADMISSION.SourceAdmNatCode AS SourceAdm
[code]....
View 4 Replies
ADVERTISEMENT
Mar 5, 2004
I have an existing table (see below).
-----------
[FormCode] [varchar] (4) NULL ,
[FiscalYear] [char] (4) NULL
-----------
I want to add the column below after the [FormCode] when my SPROC runs.
-----------
[FiscalMonth] [char] (2) NULL
-----------
Any ideas would be a big help?
TIF
View 7 Replies
View Related
May 21, 2008
Hi all,
I am trying to insert some new rows into an existing SQL table. The table name is Agt_table, and I want to add some data for some new agents into existing columns:
Agent name, agent code, phone number, fax number
Example -
I want to add the following record to my existing table Agt_table
Agent name: ABC Company
Agent code: 012345
Phone #: 555-555-5555
Fax#: 555-555-5555
How would I write the sql statement to do that?
Thanks so much!!!
View 12 Replies
View Related
Nov 20, 2013
I have created a table as below mentioned. Then I want to alter the ID column as identity(1,1) without dropping the table as well as losing the data.
create table dbo.IdentityTest
(
id int not null,
descript varchar(255) null,
T_date datetime not null
)
View 7 Replies
View Related
Jun 30, 2014
Below is sample SQL:
SQL_1: Creates a database
SQL_2: Creates 2 stored procedures
Now, I need to search database SP`s for Table2 t2 ON t2.CID = t1.CID and ALTER them with Table2 t2 ON t2.CID = t1.CID.
INNER JOIN Table3 t3 ON t3.CID = t1.CID
WHERE CustGroup = 'Employees'SQL_1:
USE [master]
GO
[code]...
View 6 Replies
View Related
Apr 23, 2015
I'm trying to rename a table with date suffix at the end of the table name, and drop the date suffix table which is greater than 7 days. for that I have the below sql, I have not included the drop syntax in this.
I'm not able to rename with the date suffix in the below sql, syntax error at '+'
DECLARE
@TPartitionDate date
IF EXISTS (SELECT * FROM sysobjects WHERE Name = 'IIS_4')
BEGIN
SELECT
@TPartitionDate = MAX(PartitionDate)
FROM PartitionLog (NOLOCK)
EXEC sp_rename 'IIS_4','IIS_4_'+ @TPartitionDate
END
View 2 Replies
View Related
Aug 14, 2015
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
View 5 Replies
View Related
Nov 2, 2015
INSERT
INTO [Table2Distinct]
([CLAIM_NUMBER]
,[ACCIDENT_DATE]
[code]....
I used the above query and it still inserts all the duplicate records. What is wrong with my statement?
View 5 Replies
View Related
Nov 8, 2015
I am new to use MERGE statement. The MERGE cannot find any match Cardnumber in the target table. It inserts row into an existing row on the target table causing SQL rejected with duplicate key not allowed. The CardNumber is defined as a primary key on the target table with no duplicate allowed. Below snippet stop when MERGE insert a row exists on the target. The source table contains multiple rows with the same Cardnumber because it is a transactional table with multiple redemptions.
If MERGE cannot handle many (source) to one (target) relationship, what other method that I can change to in order to update the target GiftCard table which keeps track of gift card balance?
Below is the error message:
Msg 2627, Level 14, State 1, Line 5
Violation of PRIMARY KEY constraint 'PK_GiftCard'. Cannot insert duplicate key in object 'dbo.GiftCard'. The duplicate key value is (63027768).
The statement has been terminated.
DDL of the target table:
CREATE
TABLE [dbo].[GiftCard](
[CardNumber] [varchar](50) NOT NULL,
[Year] [int] NULL,
[Month] [int] NULL,
[Period] [int] NULL,
[TransAmount] [decimal](10, 2) NULL,
[Code] ....
View 8 Replies
View Related
Jun 15, 2015
I'm trying to add random dates to date column in existing table, but these need to be week days (Mon-Fri).I'm a beginner in TSQL, worked with MS Access many years - in Access I used to do something a bit different:
DateAdd("d",(Int((5*Rnd([ID]))+1)),#31/08/2015#)
Table had ID, I gave a date it would start from (31/08/2015) and then range of ID to apply new date:
UPDATE table1 SET table1 .date = DateAdd("d",(Int((5*Rnd([ID]))+1)),#31/08/2015#)
WHERE (((table1 .ID) Between 1 And 5456));
This was applying random dates in range of 31/08/2015 + 5 days, so I could give a starting date of Sunday to get random dates populated over given IDs from Monday to Friday.Now, how can I do it in TSQL?I have a table with ID and dates column. I would like to apply new random dates from some range, but making sure they will be week days.
View 3 Replies
View Related
Nov 4, 2015
Existing table structure is below:
Table name: Student
Columns in Student are below:
Student_Id
Subject_Id
Quarter
Col1
Col2
Combination of Student_Id, Subject_Id and Quarter columns is the primary key. One student can take one subject in a quarter. Now the new requirement is a student can take multiple subjects in a quarter. So need to add another table like below:
NEW table name: Student_Subject and
column are below:
Student_id
Subject_Id
Quarter1
All the above three columns combination is primary key.
After the new table Student_Subject created,
remove Subject_Id column
from Student table.
When the user clicks on a button after selecting multiple subjects and provide col1 and col2 data then one row gets inserted into Student table and multiple rows gets inserted into Student_Subject table.
Is there any other table design that satisfies one student can take multiple subjects in a quarter?
View 15 Replies
View Related
Aug 12, 2015
I am working on moving information from one of our databases into a newer one the company has recently setup. I am working in MS SQL Server 2012 and am trying to Inset/Update (depending on the information) a part table. I will list the two tables I am working on as Old (where I am getting the information) and New (where it is to be inserted into).
The old table has about 250 columns of information, most of which is not needed. The needed information is as follows: Name, ID, Component1, Component1_PIN,Component1_SN, Component1_Description, Component2, Component2_PIN, Component2_SN. The component section repeats up to Component12.
The new table has columns setup as such: Name, ID, Case, CasePIN, CaseSN, Case_Desc, Processor, ProcessorPIN, ProcessorSN, Processor_Description, Memory, MemoryPIN, MemorySN, Memory_Description, etc.
The issue I am having is that in the old table each component can have Case, Processor, Memory, etc in that one column. I need to insert Case, Memory, etc into the correct column in the new table while keeping intact the rest of the information.
Example:
Old Table
Name | ID | Component1 | Component1_PIN | Component1_SN | Component1_Description | Component2 | Component2_PIN | Component2_SN | Component2_Description
Nest8 | 5682 | Case | 901834 | 237848117 | Black, rectangular | Memory | 9081234 | 5398798134 | NULL
Nest8 | 5978 | Case | 901463 | 237848138 | Black, rectangular | Processor | 2394875 | 2903857809 | Bad
Reds3 | 5683 | Memory | 2405 | 89752342 | Crucial | HardDrive | 92387595 | 457982234 | NULL
Bass | 5644 | HardDrive | 79872346 | 5321675789 | NULL | Case | 10984528 | 3498769872 | NULL
I am not sure how to loop through and grab each part and place it in the column it needs to be while keeping it with the ID.
View 7 Replies
View Related
Jun 8, 2006
Hi There
I have checked CHECKDB syntax in BOL, i just want to be sure.
In there no way to run CHECKDB on a user database and exclude certain tables, in SS2000.
I have 2 really huge tables , over a billion rows. Nightly i want to run CHECKDB on the database but i do NOT want CHECKTABLE run on these 2 tables as it takes hours.
Or is my only option to instead of running CHECKDB, writing a script that loops through user tables excluding these and running CHECKTABLE. If this is my only option can it be done with a cursor looping through user tables and running CHECKTABLE on each one?
Thanx
View 1 Replies
View Related
Jul 23, 2015
In y sql server table has millions of records available. I don't want to drop the tables.
My requirement is I want to change the column order of an existing table. some tables I am able to saving on design window Like Below image.
Even I had generate a script and using that script trying to execute on Management Studio but unable to saving the new column orders. I am getting the Timeout expired error after couple of minutes. How can we save the orders without dropping the table !
View 13 Replies
View Related
Jun 9, 2015
I have a non-partitioned table (TableToPartition) and I want to apply an existing partition scheme (PartSch) to it using a query. I didn't find any option so I used the StorageCreate Partition wizard to generate the script.why this clustering magic needed if it is dropped at the end? Isn't there another way without indexing to partition a table, say something with ALTER TABLE? (SQL Server 2012)
BEGIN TRANSACTION
CREATE CLUSTERED INDEX [ClusteredIndex_on_PartSch_635694324610495157] ON [dbo].[TableToPartition]
(
[ID]
)WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF) ON [PartSch]([ID])
DROP INDEX [ClusteredIndex_on_PartSch_635694324610495157] ON [dbo].[TableToPartition]
COMMIT TRANSACTION
View 2 Replies
View Related
Aug 19, 2015
I have 2 tables: Source Table - IncidentDimNew and Destination Table - IncidentDimNew with identical columns: Id and CreatedDate but the data is different.
I would like to insert distinct data from those 2 columns of 1st table into the same 2 columns into the 2nd table but I onlt want to replace the values in the 2nd table where the Created Date is > 2015-04
I compiled the code in order to get the information I want from 2 tables:
Source Table
SELECT
COUNT(Id),
LEFT(CONVERT(VARCHAR(10)), CreatedDate, 126), 7)
FROM
IncidentDimNew
[Code] ...
This is the code I wrote in order to do it
INSERT INTO IncidentDim
[Id]
,[CreatedDate]
SELECT
[Id]
,[CreatedDate]
FROM
IncidentDimNew
where left(CONVERT(VARCHAR(10), CreatedDate, 126),7) > '2015-04'
GO
But what it does it's gives the SUM of the values in the corresponding rows where the values are not null which I don't want.
So how do I leave the values as is from table IncidentDim and insert new values as it is from IncidentDimNew where the Created Date is > 2015-04?
View 2 Replies
View Related
Jun 4, 2015
I am looking for an alternate logic for below-mentioned code where I am inserting into a table and having left join with the same table
insert TABLE1([ID],[Key],[Return])
select distinct a.[ID],cat1,cat2 from
(select ID,[Key] Cat1 ,[Return] cat2 from @temp as temp) a left join TABLE1 oon a.ID= o.ID
and a.Cat1 = o.[Key]
and a.cat2 = o.[return]
where [key] is null order by ID
View 2 Replies
View Related
Apr 26, 2015
Simple table created but unable to insert values into it due to the above error
CREATE TABLE Ingredient(
ingredientCode CHAR(10)
PRIMARY KEY NOT NULL,
name VARCHAR(20),
ingreType VARCHAR(20),
[Code] .....
--always received this error: Conversion failed when converting date and/or time from character string
View 6 Replies
View Related
Jun 24, 2015
Suppose you have a simple DML "execute as..." trigger that looks like this:
CREATE TRIGGER dbo.myTrigger
ON dbo.myTable
WITH Execute As Owner
AFTER INSERT
AS
[code]...
which runs as "owner" so that the user inserting into "myTable" won't have the privs to edit the audit table.How does one capture the identity of the user whose insert statement caused the trigger to fire? I've tried "current_user" and "system_user" without success when "execute as ..." is used: they each return a value not related to the identity of the user running the original insert.without an "execute as" clause, what prevents a user from adding to or editing the audit table directly?
View 6 Replies
View Related
Jul 24, 2015
I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB]
GO
/****** Object: Trigger Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
View 3 Replies
View Related
Aug 12, 2014
I have the following objective:
1. I want to check a column to see if there are values (to Eliminate dups)
2. Once checked the values in a column, if not found insert the new value
Here is my code for this:
ALTER TRIGGER DUPLICATES ON AMGR_User_Fields_Tbl
-- When inserting or updating
AFTER INSERT, UPDATE AS
-- Declare the variables
DECLARE @AN varchar(200)
[Code] ....
View 1 Replies
View Related
Oct 10, 2007
I am trying to insert data into two different tables. I will insert into Table 2 based on an id I get from the Select Statement from Table1.
Insert Table1(Title,Description,Link,Whatever)Values(@title,@description,@link,@Whatever)Select WhateverID from Table1 Where Description = @DescriptionInsert into Table2(CategoryID,WhateverID)Values(@CategoryID,@WhateverID)
This statement is not working. What should I do? Should I use a stored procedure?? I am writing in C#. Can someone please help!!
View 3 Replies
View Related
Jun 23, 2015
I have a table like this:
ID Order Date .....
1 Bla 2015-01-13 12:00:45.2713558 .
2 Mio 2015-01-13 12:05:45.2713558 .
3 Tala 2015-01-13 14:00:45.2713558 .
4 Bla 2015-01-13 15:00:45.2713558 .
5 Mio 2015-01-13 20:00:45.2713558 .
6 Bla 2015-01-15 17:00:45.2713558 .
7 Bla 2015-01-15 19:00:45.2713558 .
[code]...
I tryed several things with CASE, IF, EXISTS,... but I had no success.
View 13 Replies
View Related
Apr 28, 2015
I have been researching BOL and other online resources but cannot seem to get a definitive answer.
Current Output:
[MemberID][Category][Type]
12345ABCtest
12345XYZtest
12777ABCtest
12888FGDtest
Desired Output:
[MemberID][Category][Type]
12345ABCtest
12777ABCtest
12888FGDtest
Query:
SELECT m.MemberID,
vw.Category,
vw.Type,
FROM dbo.TestVW vw JOIN
dbo.TestMember m ON vw.MemberKey = m.MemberKey
WHERE vw.Type = 'test'
GROUP BY m.MemberID,
[Code] ...
but cannot seem to be able to return one record with its corresponding value criteria.
View 21 Replies
View Related
May 6, 2015
I have been asked to create PK on many tables using a query on all tables where we do not have clustered indexes. Some of the tables contains PK but non-clustered. If in a table there are no PK, then how to decide on which column PK can be created? can we do it with the query without data loss and without human intervention?
View 5 Replies
View Related
Nov 18, 2015
I need to make a selection on join datasets with 2 conditions and populate the results in another dataset(Report).It is working with the fist condition "AccountingTypeCharacteristicCodeId = 3"...
INSERT INTO SurveyInterface.tblLoadISFNotification (OperatingEntityNumber, SDDS, SurveyCodeId, QuestionnaireTypeCodeId, ReferencePeriod, DataReplacementIndicator, PrecontactFlag, SampledUnitPriority)
SELECT ISF.OperatingEntityNumber
,[SDDS]
,[SurveyCodeId]
,[QuestionnaireTypeCodeId]
,[ReferencePeriod]
,[DataReplacementIndicator]
[code]....
Know I also want to add in that new dataset(report) all the duplicates of concatenated variables
ISF.OperatingEntityNumber/ISF.QuestionnaireTypeCodeId
GROUP BY ISF.OperatingEntityNumber, ISF.QuestionnaireTypeCodeId
View 4 Replies
View Related
Sep 1, 2015
I have the following table (Table does not have unique key id )
Last Name First Name DATE Total-Chrg
Jaime KRiSH 5/1/2015 -4150.66
Jaime KRiSH 5/1/2015 1043.66
Jaime KRiSH 5/1/2015 1043.66
Jaime KRiSH 5/1/2015 4150.66
Jaime KRiSH 5/3/2015 4150.66
Peter Jason 5/1/2015 321.02
Peter Jason 5/1/2015 321.02
Peter Jason 5/23/2015 123.02
I want the results to be in following way
Uniq ID Last Name First Name DATE Total-Chrg
1 Jaime KRiSH 5/1/2015 -4150.66
2 Jaime KRiSH 5/1/2015 1043.66
2 Jaime KRiSH 5/1/2015 1043.66
3 Jaime KRiSH 5/1/2015 4150.66
4 Jaime KRiSH 5/3/2015 4150.66
5 Peter Jason 5/1/2015 321.02
6 Peter Jason 5/1/2015 321.02
7 Peter Jason 5/23/2015 123.02
May be we may do by dense_rank or Row_Number, but I couldn't get the exact query to produce based on the above table values. There are some duplicates in the table(which are not duplicates as per the Business). For those duplicated Unique ID should be same(Marked in Orange Color which are duplicates).
View 4 Replies
View Related
Jun 22, 2015
Currently I have a column with multiple postcodes in one value which are split with the “/” character along with the corresponding location data. What I need to do is split these postcode values into separate rows while keeping their corresponding location data.
For example
PostCode Latitude Longitude
66000/66100 42.696595 2.899370
20251/20270 42.196471 9.404951
Would become
PostCode Latitude Longitude
66000 42.696595 2.899370
66100 42.696595 2.899370
20251 42.196471 9.404951
20270 42.196471 9.404951
View 6 Replies
View Related
Mar 28, 2007
Dear Friends,
I am having 2 Tables.
Table 1: AddressBook
Fields --> User Name, Address, CountryCode
Table 2: Country
Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Thanks in advance.
Regards
Ramakrishnan
Singapore
28 March 2007
View 4 Replies
View Related
Nov 3, 2015
I have a webpage where users can connect with other users by sending them a request. Sending the request just puts a row in a connect table that contains the users id, the targetusers id, a requesteddate, an accepted date and a disconnectdate (for the original requester to end the connection and a reject bit the the target can reject the request. Hoever I need to check to assure that the connect does nt already exist either as pending (requestdate is not null and accept date is null) or both dates are not null (connection already complete.).
ALTER PROCEDURE [dbo].[requestConnect]
-- Add the parameters for the stored procedure here
@requestor int,
@requested int
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from interfering with SELECT statements.
[Code] ....
View 4 Replies
View Related
May 22, 2006
I want to select all usernames from a table EXCEPT the "Admin" username...is this possible with an SQL statement and if so: how?
View 3 Replies
View Related
Dec 17, 2007
Hello,
I am trying to write a query that solves the following problem:
I want all records from [Table1] that are not referenced in [Table2].
Table2 has a foreign key that points back to the unique identifier of a record in Table1.
I'm not sure how to solve this type of query. I was looking into a left joins, but this is sort of the inverse of what I want to do.
Thank you for your help!
View 7 Replies
View Related
May 27, 2015
We are planning to convert or change all existing Traces to Extended Events in SQL server 2012. What is the procedure to convert custom traces. We have already created some below custom traces: like this we are planning to convert for all servers.
exec sp_trace_setevent @TraceID, 20, 23, @on
exec sp_trace_setevent @TraceID, 20, 8, @on
exec sp_trace_setevent @TraceID, 20, 12, @on
exec sp_trace_setevent @TraceID, 20, 64, @on
exec sp_trace_setevent @TraceID, 20, 1, @on
exec sp_trace_setevent @TraceID, 20, 21, @on
[code]...
View 6 Replies
View Related
