Transact SQL :: Instantaneously Move And Delete Data
May 6, 2015
I am using SQL Server 2012 Standard Edition. I have a requirement to instantaneously move data from 3 tables that are dependent on each other in a database to another database to same tables with same structure and dependencies.
I can set up replication to manage this. However the data once moved over has to be deleted from the source database immediately after the move. Hence replication is ruled out. Also data is continuously being insert into source database into those 3 tables.
I want to create a sql agent job that handles the data move and delete process and shcedule it to run once every minute. What is a best strategy to handle this without causing deadlocks in the source database?Below is the ddl and all objects in source database match the destination database the only difference is destination has 100 tables and source has only 3 tables which are shown below
CREATE TABLE [dbo].[StackPosition](
[StackPositionId] [uniqueidentifier] NOT NULL,
[AccountTriggerId] [uniqueidentifier] NOT NULL,
[StackPositionStatusId] [int] NOT NULL,
[QueuedAt] [datetime] NOT NULL,
[LastUpdatedAt] [datetime] NULL,
[Code] ....
View 3 Replies
ADVERTISEMENT
Jun 18, 2015
I have a database that is off site, it has a database one it that I have a Linked server connection to. We have no other means of connecting to that server database except via that linked server connection. Is there a way I can Copy eplicatemoves etc... that database to an internal server with out doing it table by table. It is apx 80gig db
Copying a backup file is not an option either, and Mailing it on media make it a significant delay.
View 2 Replies
View Related
Oct 14, 2015
I've a table named Master in which a column is referenced in other tables like Child1, Child2,.. ChildN. I've deleted a part of data( say Column Id values 1,2,3,4,5) from all the Child tables which pointed to Master table Id column.
Now, I want to delete the same Id values from Master table as there rows are not referred in any of the child tables. When I try to delete the Id values 1 thru 5 from Master table, it is scanning all child tables for the references and taking lot of time for the deletion.
Is there any way to specify to the system(in the query) to delete the Master table values without scanning the child tables..?
View 5 Replies
View Related
Apr 9, 1999
I need to remove log segment of one database from current position to another drive. The current log segment is used by two databases. This was created by mistake. Now we need to fix the problem and create another log segment for the other database. If we keep the log setment as is, we will have problems deleting one of the databases in the future.
Thanks for your help,
Ana.
View 1 Replies
View Related
Nov 10, 2005
I have a column that contains extra info that needs to be moved to another column or deleted alltogether. is there a way to select these items and move them to another column, leaving the rest of the data in the original column?
EXAMPLE
MYTABLE >COLUMN1
May have Data Like: ABCDE123 SER1 or XYZ12DEFSer1:1
WHAT I NEED TO DO IS
Move anything after the SER1 to a new column and retain the rest of the data in the original column. making it look something like this:
COL1 COL2
ABCDE123 SER1
XYZ12DEF Ser1:1
Another question is if there is a way to delete extra spaces? Like make all data that has two or more extra spaces, just single spaces and any additional spacing after a row of data, delete all additional spaces after the last letter/character/number.
One more question - What would be a great resource to learn MS SQL in more depth?
I am trying to learn ASP/VBScript/JavaScript/ and now MS SQL all at once b/c this is what my business depends on. Trying to be 5,000 hats at once can get confusing and overwhelming, so I am looking for any "Crash course" I can to learn as much, as fast as possible. Any direction or ideas?
Thank you.
View 4 Replies
View Related
Apr 16, 2015
I am using SQL Server 2012 SE.I am trying to delete rows from a couple of tables (GetPersonValue has 250 million rows and I am trying to delete 50Million rows and GetPerson has 35 Million rows and I am trying to delete 20 million rows). These tables are in TX replication.The plan is to delete data older than 400 days old.
I tried to move data to new tables from the last 400 days and it took me like 11 hours. If I delete data in chunks of 500000 then its taking a long time to rebuild indexes(delete plus rebuild indexes 13 hours). Since I am using standard edition partition wont work.
find ddl below:
GO
CREATE TABLE [dbo].[GetPerson](
[GetPersonId] [uniqueidentifier] NOT NULL,
[LinedActivityPersonId] [uniqueidentifier] NOT NULL,
[CTName] [nvarchar](100) NULL,
[SNum] [nvarchar](50) NULL,
[PHPrimary] [nvarchar](50) NULL,
[code]....
View 1 Replies
View Related
Jul 12, 2015
I have a job which copies .txt files 24 hours 7 days a week to c:TempSource
What I am planning to do is copy the files from one location to another say c:TempTarget
So I have written the Powell shell script and when i put that in the sql agent job i get below error ;
A job step received an error at line 5 in a PowerShell script. The corresponding line is '$filesToMove = $files | Where -Property "Name" -NotLike -Value $newestFile.Name'. Correct the script and reschedule the job. The error information returned by PowerShell is: 'A parameter cannot be found that matches parameter name 'Property'. '. Process Exit Code -1. The step failed.
$sourceFiles = "c:TempSource*.txt"
$targetFolder = "c:TempTarget"
$files = Get-ChildItem $sourceFiles
$newestFile = ($files | sort LastWriteTime -Descending)[0]
$filesToMove = $files | Where -Property "Name" -NotLike -Value $newestFile.Name
$filesToMove | ForEach { Move-Item $_ $targetFolder }
View 12 Replies
View Related
Oct 15, 2015
I have to move all the tables in a database from one file group to another file group.All my tables have millions of records and the indexes are in correct file group but not the tables. How much time will it take to complete the whole process ?
View 13 Replies
View Related
May 19, 2012
I am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies
View Related
Aug 6, 2015
create table target
(Taid int, studenid int, std int,div int,year int ,ActivityId int)
insert into target values(1,1,1,2015,1),
(1,1,1,2015,2),(1,1,1,2015,3),(1,1,2,2015,1)
,(1,1,2,2015,4) ,(1,1,2,2015,3);
create table activity(ActivityId int,Activity nvarchar)
insert into activity values (1,'sport')
,(2,'swim')
,(3,'read')
,(4,'dace');
I want to edit(update,delete,insert) target table activity from front end for that I took grid view and that grid all activity come of single student studenid(unique key for each student) that you see design below like this
that activity present in target table that come as check in check and that activity not select student from activity activity table that come unchecked
I want to update above information means unchecked alredy check data should delete and new check data add , already check data update
I have use merge statement but problem is that at single time only one row execute that is check because data come from data gridview.
View 5 Replies
View Related
Apr 30, 2015
What is wrong in this query am getting incorrect syntax near ','.error. I am using sql server 2014
DELETE ab, b
FROM Authors AS a INNER JOIN AuthorArticle AS ab ON a.AuthID=ab.AuthID
INNER JOIN Articles AS b ON ab.ArticleID=b.ArticleID
WHERE AuthorLastName='Tom';
View 4 Replies
View Related
May 15, 2015
I am using SQL Server report 2008/2012 (SSRS) and my report viewer contains body content with 3 Row groups.
While printing the report, data print with blank space and move to continue data to next page.
Departure flight : 70 rows
First Page : 42 rows printed
Second Page : 23 rows printed [ Supposed to be print 28 , if the total count of records more than 23 and less than 42 then the page print only 23 records ]
Third Page : 5 rows printed
Departure flight : 42 rows
First Page : 42 rows printed [Report max. record allowed to print 42 rows so if total record is 42 then print perfectly ]
Departure flight : 26 rows
First Page : 23 rows printed [Supposed to be print 26, if the total count of records more than 23 and less than 42 then the page print only 23 records ]
Second Page : 3 rows printed
View 3 Replies
View Related
Mar 11, 2008
The ERP manufacturer used an image data type to store large text data fields. I am trying to move these data types from one database to another database using either Sql Queries or MS Access. I can cast them as an 8000 char varchar to read them directly but have no luck importing into these image data fields.
Access and Crystal are not able to read these fields directly.
Any suggestions? Most information about these fields has to do with loading files but I am just moving data.
Thanks,
Ray
View 1 Replies
View Related
May 5, 2015
I have a table named [New Item] and created a default constraint on a column, and i wanted to change the data type of the column using the query
alter table [new item]
alter column pcs_qty decimal(15,2) not null
but the name of the default constraint is 'DF__New Item__Pcs_Qt__2D12A970' and i am not able to delete the constraint because it contains a space in between.Is there any work around for this.
I tried to delete the constraint by using the query
alter table [new item]
drop constraint 'DF__New Item__Pcs_Qt__2D12A970'
but I am getting the exception,
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near 'DF__New Item__Pcs_Qt__2D12A970'.
View 2 Replies
View Related
Jul 21, 2015
I have a table with more than 1000 records. The columns look like this
Import id | Reference | Date | Username | Filename
Some of the rows are duplicates except for the fact that they have different values for the first column alone (import id)
11111 test 21-07-2015 xxxxxx yyyyyy
22222 test 21-07-2015 xxxxxx yyyyyy
Is it possible to delete these kind of duplicate rows by ignoring the import id ?
View 9 Replies
View Related
Jul 24, 2015
I'm trying to delete the selected data from a table colum from a select statement.
This is the select statement
SELECT RFC822 FROM SQLGOLDMINE.DBO.MAILBOX MB WHERE ((MB.CREATEON >= '2014-07-24' AND MB.CREATEON <= '2015-07-24') OR (MB.MAILDATE >= '2014-07-24' AND MB.MAILDATE <= '2015-07-24')) AND (MB.MAILREF LIKE '%auction notification
& invitation%')
What the delete statement would look like. I've tried replacing Select with delete from but get a sytax error.
View 9 Replies
View Related
Jun 25, 2015
We are not allowed to write delete statement in a function. It will give the below error.
"Invalid use of a side-effecting operator 'DELETE' within a function."
We will get the same error for truncate/drop statements.
What is the reason behind this error?
View 8 Replies
View Related
Jun 15, 2015
I am working on an app that getting quite a few deadlocks due to delete statements. I have turned on the sql trace flags and pulled the offending delete statements out of the ERRORLOG and trying to mesh those up with the indexes defined on the table, etc. looking to see if there is anything that can be done strictly from the db side (no app code change) to reduce/eliminate these deadlocks. I have ran some tests/played around with RCSI and even disabling lock escalation but neither have improved my results.
What I have done is to search the errorlog file for DELETE FROM Tablename, output those matching lines, then sort of normalize the literal values to # or XYZ, open in Notepad++, removed trailing whitespace + dups and sort to come up with these results for the unique list of offending T-SQL statements (a LOT easier to read in text editor so sending screen cap.
Open this url in new tab [URL] ....
View 7 Replies
View Related
Aug 4, 2015
I have a table which has a recursive relationship to its self neither of the columns involved are FK columns
CREATE TABLE [dbo].[ix_Trace](
[Trace_Id] [uniqueidentifier] NOT NULL,
[Trace_BubbledTraceEnter_Id] [uniqueidentifier] NULL,
[Trace_EnterId] [uniqueidentifier] NULL,
[Trace_Application_Id] [uniqueidentifier] NULL,
[Trace_Session_Id] [uniqueidentifier] NULL,
....
Where Trace_EnterId is the parent ID and BubbledTraceEnter_Id is the child ID. My test case has nested trace lines that go down 5 levels, but when I delete the top trace line, only the child directly under it is deleted leaving the other 3 as orphans. Here's the trigger:
ALTER TRIGGER [dbo].[DTrig_xTrace]
ON [dbo].[ix_Trace]
FOR Delete
AS
BEGIN
SET NOCOUNT ON;
DELETE FROM ix_Trace
FROM ix_Trace INNER JOIN
deleted as dt ON ix_Trace.Trace_BubbledTraceEnter_Id = dt.Trace_EnterId
How can I make this cascade all the way down?
View 7 Replies
View Related
Sep 28, 2015
I just wanted to delete a record from a filetable by "delete from dbo.DocumentStore where stream_id = 'A322276D-AE65-E511-8266-005056C00008'".
Then i received error 1934:
Meldung 1934, Ebene 16, Status 1, Zeile 578
Fehler bei DELETE, da die folgenden SET-Optionen falsche Einstellungen aufweisen: 'ANSI_PADDING'. Überprüfen Sie, ob die SET-Optionen für die Verwendung mit indizierte Sichten und/oder Indizes für berechnete Spalten und/oder gefilterte Indizes und/oder Abfragebenachrichtigungen
und/oder XML-Datentypmethoden und/oder Vorgänge für räumliche Indizes richtig sind.
Something that i made a mistake with the SET-option for 'ANSI_PADDING' with indexted views and/or calculated rows and/or filtered indeces ...
View 3 Replies
View Related
Oct 12, 2015
I've been able to get this select query to work, but I'm not sure how to modify it to turn it into a DELETE query:
USE QSCTestENG
select p.[testid], COUNT(c.[testid])
FROM [dbo].[tblTestHeader] p
left outer join [dbo].[tblTestMeasurements] c ON p.[testid]=c.[testid]
where p.[model] = 'XPPowerCLC125US12'
group by p.[testid]
having COUNT(c.[testid]) <>48;
View 2 Replies
View Related
Jun 23, 2015
I have a large table with 100 Million records that has around 1 million duplicate records that need to be deleted.
I am running a script that creates a staging table called,DuplicateTable that collects all the duplicates and then I want to write a an effecient delete statement.
Is it possible to write something like:
delete from OrigTable O join DuplicateTable D
on O.Key = D.key
Or do I have to run a loop on the DuplicateTable and run a delete statement record by record ?
View 4 Replies
View Related
Sep 29, 2015
I would like to perform autodeletion operation from my table using stored procedure....
Here is my table structure:
Emp.id | emp_name | dept | desig | time_out | date | emp_sign |
if the user inserts new employee record that record should delete automatically from original after
30 minutes..I don't want to keep that newly inserted record after
30 minutes...I don't know how to achieve this...
View 12 Replies
View Related
Jun 14, 2006
Next month client is moving servers to new location. The servers will get new ip and subnet Our user db's which are on a SAN will be moving to new SAN. My plan is the following, please correct any mistakes.
1. Do full backups of everything
2. Detach user db's
3. Copy these files to usb box (100 gig worth)
4. After server is in new world bring it up
5. Copy db files from usb
6. Attach db files
View 6 Replies
View Related
Jun 7, 2007
Hi,
I'm a C# developer, not a DBA, but fairly familiar with sql server 2000 and learning 2005. I have a need to update a table on one sql server from another remote sql 2005 server. Both will be SQL 2005, but will not be on the same network, so there will be firewall issues to contend with. Security is not a huge concern as the data is public info and not personal secure information or anything like that. What I'll have is a table of data in one sql database. I will have a copy of that data on another sql server that is used at an ISP and drives a web site. I need the table at the ISP sql server to get updated from the SQL server that is onsite in our office on our private network. I would like to not have to get network admins to open sql server ports if possible, so I guess I'm wondering if there is an easy way with SQL 2005 to update data from one sql server to another in the environment that I have described that maybe could expose the data over a common port (ie port 80). I don't want to have to use integrated security as I'm not sure this would work between remote databases in this scenario. I don't know if the web service end point support in sql 2005 would allow this. The examples I have seen online show a sql endpoint created and then accessed from a .NET application. I can do that if I have to, but I would rather do all of this inside the database in some fashion. I am open to any idea that would work and if I need to, I can ditch the idea of using something over port 80 and can get the necessary ports open between the sql servers. This is a pretty simple scenario that we have with one table of data needing to be updated weekly on a web based sql server from a remote sql server.
Any ideas on how you would approach this would be greatly appreciated. Security for the data I'm accessing is not a huge concern as the data is public domain as I've said, but I need to make sure the rest of the server and database on both ends are secured.
Thanks for any help!
View 6 Replies
View Related
Jul 20, 2005
Am MS Access 2000 DB To an SQL SERVER 2000?(without Enterprise manager)
View 3 Replies
View Related
Oct 29, 2015
How to delete records from multiple tables if main table’s entity is deleted as constraints is applied on all..There is this main table called Organization or TblOrganization.and this organization have branches which are in Brach table called tblBranch and this branch have multiple applications let say tblApplication and these application are used by multiple users called tblUsers.What I want is: when I delete the Organization All branches, application and users related to it must be deleted also.How I can apply that on a button click in asp.net web forms..Right now this is my delete function which is very simple
Public void Delete(int? id){
var str=”DELETE FROM tblOrganization WHERE organizationId=”+ id ;
}
And My tables LOOK LIKE this
CREATE TABLE tblOrganization
(
OrganizationId int,
OrganizationName varchar(255)
[code]...
View 3 Replies
View Related
May 18, 2008
hi, I currently uses SQL Server 2005.I need to move the data to my website, how do I do that? I have the SQL Server Management Studio Express but I couldn't not get it to export the data in .sql file (which is needed to import to my website's SQL database).Please let me know of any tools I need to perform the task. thanks.
View 3 Replies
View Related
May 15, 2006
Currently we update database A everyday with tables from database B.
Database is India and has poor connection speed. What would be the best method of moving this data.
Currently it's about 100 tables and on average its about 900 mb.
Any input is greatly appreciated.
thanks,
View 3 Replies
View Related
Jan 23, 2004
Hello everybody
We need to move table T1 from database A to T1 database B on same server
size of table T1 15 GB and 40000000 rows
database B just created and will act as warehouse
could it be done simply by
1.creating table T1 on db B and then
2.set db to simple recovery
3.
insert into B.dbo.T1
select * from A.dbo.T1
4. create all the indexes on table T1 in db B
free disk space is 35GB
Any idea how to optimze import
Thank you
View 5 Replies
View Related
Feb 23, 2007
Guys,
We are currently moving our environment. I was told that we need to copy all the stuff over. More specifically, we want to move everything except the data, as our data is dynamic and will fill up in a few days by itself.
What is the best way to move everything over from one server instance to another?
My current approach is the following:
1. Create the file groups we have on our current server on the new server
2. Script out all databases with stored procedures, functions, views, priviliges, indexes ...
3. Script out all the jobs
4. Script out all the dts packages (or rather save each in a file)
5. Load all scripts into the new sql server
6. Re-create user accounts (can these be scripted out also and then loaded?)
Am I missing something or is there a wiser alternative?
Thanks a lot
View 3 Replies
View Related
Mar 12, 2004
We have a problem with our SQL 2000 server which we know is a product bug.
Is there anyway of importing, Copying the sql 2000 table back down to SQL 7 until the issue is resolved,
many thanks
View 1 Replies
View Related
Jul 20, 2005
hello,my problem is how to move data files drom drive c: to drive d: ??--MarcinS
View 1 Replies
View Related
