if the variable contains any of the character  that is not present in the  following Below table then it should display "InValid Character" else "valid Character"
DECLARE @MyString VARCHAR(100)
SET @MyString = 'ABC$['
selectÂ
caseÂ
[code]....
I have an issue with validating an XML file I have from a 3rd party.
Willing to improve and standardise company's process, I have created an XML schema collection (SQL 2008R2), but when I validate the XML file against it I always keep getting the above error: Invalid simple type value dateTime.
Definition of dateTime from w3schools website says:
------ Start of quote ----
"DateTime Data Type
The dateTime data type is used to specify a date and a time.
The dateTime is specified in the following form "YYYY-MM-DDThh:mm:ss" where:
YYYY indicates the year
MM indicates the month
DD indicates the day
T indicates the start of the required time section
hh indicates the hour
mm indicates the minute
ss indicates the second
Note: All components are required!
The following is an example of a dateTime declaration in a schema:
<xs:element name="startdate" type="xs:dateTime"/>
An element in your document might look like this:
<startdate>2002-05-30T09:00:00</startdate>
------ End of quote ----
So I would assume that dates like 2012-10-24T14:23:00 or 2012-10-24T14:15:00 should be fine, but no -fails.
It works though only if I add "Z" at the end. Obviously 3rd party do not want to change anything, as it works for ages.
Hi!
Trying to generate a report (using WebForm ReportViewer, from dynamically created RDL report and SQL Server 2005 OLAP cube), if a database field contains control characters (code < 0x20), Reporting Services generate following message:
' ', hexadecimal value 0x02, is an invalid character. Line 1, position 2376.
Is it possible to ignore that? I don't care if browser shows an octopus, the report must work.
Thanks, Andrei.
I'm getteing an error saying "[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification" when i try to debug a store procedure.
The Store Procedure parameters are as below.
PROCEDURE clCreateUnpostedTrxEarnType
(
@SERIES int,
@PERIODID int,
@YEAR int,
@PTRATIO float,
@CPTYPE int,
@CPTRXTYPE int,
@Startdate datetime,
@Enddate datetime,
@O_iErrorState int = NULL output
)
I'm passing the values as below
3, 8, 2007, 3, 1, 3, '2007.08.01', '2007.08.31', Null
I tried passing '20070801', '20070831' & 2007.08.01, 2007.08.31 for date.
How should i fix this issue to debug the below issue?
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83297
Thanks & Regards
Pradeep M V
Dear All,
I am using the backend SQLServer with Powerbuilder, I write a stored procedure and tried to create a datawindow to use that procedure but failed, it returns error code 22005 -Invalid Character value for cast specification. I tried to change any setting in ODBC but still failed.
Is anyone can give help? Thanks in advance.
Terrence.
Hi All,
accessing through ODBC a frond end application which is running on MS SQL Server 2005, works just fine with a specific setup as concerned as the decimal/thousands separators ("," for thousands and "." for decimals). If i switch these settings alternatively ("." for thousands and "," for decimals), i get this error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification.
I tried to search forum and internet but no luck.
Thanks in advance
hello,
i have a problem with SQL Server Agent. Sometimes, when a scheduled job runs i get this error:
Error: 2008-03-13 06:04:50.50 Code: 0xC0202009 Source: Load Current OLE DB Destination [124] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". End Error Error: 2008-03-13 06:04:50.52 Code: 0xC020901C Source: Load Current OLE DB Destination [124] Description: There was an error with input column "collectDate" (217) on input "OLE DB Destination Input" (137). The column status returned was: "Conversion failed because the data value overflowed the specified type.". End Error Error: 2008-03-13 06:04:50.52 Code: 0xC0209029 Source: Load Current OLE DB Destination [124]
the code i use looks like this
DECLARE @Report_date datetime
SET @Report_date = dateadd(dd,-1,convert(varchar(10),getdate(),121))
select
CollectDate = @Report_date
the destination column is datetime.
Is this a known issue / bug? Because this doesn't happen everytime, and when it does happen all i have to do ia run the job again.
Thank you in advance
Hello!
I wrote a CLR function, which is receiving some XML parameters. In certein situations it gives me the following error message:
Msg 6522, Level 16, State 1, Line 58
A .NET Framework error occurred during execution of user-defined routine or aggregate "svmScale":
System.Xml.XmlException: Invalid character in the given encoding. Line 1, position 27.
System.Xml.XmlException:
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.InvalidCharRecovery(Int32& bytesCount, Int32& charsCount)
at System.Xml.XmlTextReaderImpl.GetChars(Int32 maxCharsCount)
at System.Xml.XmlTextReaderImpl.ReadData()
at System.Xml.XmlTextReaderImpl.ParseText(Int32& startPos, Int32& endPos, Int32& outOrChars)
at System.Xml.XmlTextReaderImpl.ParseText()
at System.Xml.XmlTextReaderImpl.ParseElementContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlTextReader.Read()
at System.Xml.XmlWriter.WriteNode(XmlReader reader, Boolean defattr)
at System.Data.SqlTypes.SqlXml.CreateMemoryStreamFromXmlReader(XmlReader reader)
at System.Data.SqlTypes.SqlXml..ctor(XmlReader value)
at UserDefinedFunctions.svmScale(SqlXml sql_problem, Boolean perChannel, Single x_factor, Single y_factor)
The call:
declare @data xml, @param xml
set @data = '<root>
<d>
<y>3.950000000000000e+002</y>
<v>3.896900000000000e+004</v>
<v>3.950000000000000e+002</v>
<v>0.000000000000000e+000</v>
<v>0.000000000000000e+000</v>
<v>0.000000000000000e+000</v>
<v>1.517142857142857e+001</v>
<v>1.027035714285714e+003</v>
<v>1.241071428571428e+000</v>
<v>5.185714285714286e+000</v>
</d></root>'
set @data = dbo.svmScale(@data, 1, 0.5, 0.5)
If I cahnage one of the zeros in the given tag, the error message disappears. If i cut the given tag, the error message disappears. If I cut the given tag, and then paste the previous one in place of it, the error message APPEARS. So my conclusion is, that any tag can be wrong on a specific position in the XML. This makes me wonder.
Another wonderfull thing is, that if I take this CLR function, and the same TSQL code, and I do run it on my notbook with my SQL Express, no error message. But if I try to use it on the server, with SQL 2005 it drops me this error message. The resulting XML is coming from an SELECT FOR XML AUTO, so i suspect it not having illegal characters inside. This is probably true, becouse the above replace procedure can make the message disapear.
The server:
Product: Microsoft SQL Server Enterprise Edition
Op System: Microsoft Windows NT 5.2 (3790)
Platform: NT INTEL X86
Version: 9.00.3027.00
Language: English (United States)
Memory: 4095 (MB)
Processors: 2
Collation: SQL_Latin1_General_CP1_CI_AS
Clustered: False
The notebook:
Product: Microsoft SQL Server Express Edition
Op System: Microsoft Windows NT 5.1 (2600)
Platform: NT INTEL X86
Version: 9.00.1399.06
Language: English (United States)
Memory: 1015 (MB)
Processors: 1
Collation: SQL_Latin1_General_CP1_CI_AS
Clustered: False
I would be very greatul for any suggestions.
Thanks
Arpad Varga
I have a Data Flow task that is simply copying data from table A to table B. (there is a derived column in between however)
All the columns in table A are varchar(255). The columns in table B vary: floats, decimals, etc
However, I am getting a bazillion errors when I run this, each of them to the effect that:
Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client"
I don't understand why this is happening... I've succesfully run similar scenarios with other packages, ie) moving data from one table to another table even though the tables have different data types.
Help
Thanks
I'm usung bcp to move data from one table to another. 202 million rows. The source/original table had 32 fields. The new table has 33 fields. I added a PK column to the destination/new table. The new PK column is the first field in the new table, it is set to autoincrement by 1 on each insert. The data file only has 32 fields of data per row.
The error is :SQLState = 22018, NativeError = 0 Error = [Microsoft][SQL Native Client]Invalid character value for cast specification
10 times, then bcp shuts off (default errors is 10).
C:>bcp dbname.schema.TP_LOG_NEW in e:alltplog.dat -S
dbsvr -T -f tplognew.fmt
tplognew.fmt:
9.0
33
1 SQLCHAR 0 41 " " 1 TP_LOGID_PK ""
2 SQLCHAR 0 41 " " 2 TP_LOG_ID ""
3 SQLCHAR 0 20 " " 3 PROCESS_TYPE SQL_Latin1_General_CP1_CI_AS
4 SQLCHAR 0 20 " " 4 SEVERITY_CODE SQL_Latin1_General_CP1_CI_AS
5 SQLCHAR 0 41 " " 5 TP_ERROR_REF_ID ""
6 SQLCHAR 0 41 " " 6 TP_PARTNER_ID ""
7 SQLCHAR 0 41 " " 7 TP_CUSTOMER_ID ""
8 SQLCHAR 0 500 " " 8 DESCRIPTION SQL_Latin1_General_CP1_CI_AS
9 SQLCHAR 0 255 " " 9 PROCESS_REF_ID SQL_Latin1_General_CP1_CI_AS
10 SQLCHAR 0 255 " " 10 PROCESS_NAME SQL_Latin1_General_CP1_CI_AS
11 SQLCHAR 0 24 " " 11 PROCESS_ARGUMENT_1 ""
12 SQLCHAR 0 24 " " 12 PROCESS_ARGUMENT_2 ""
13 SQLCHAR 0 24 " " 13 PROCESS_ARGUMENT_3 ""
14 SQLCHAR 0 24 " " 14 PROCESS_ARGUMENT_4 ""
15 SQLCHAR 0 41 " " 15 PROCESS_ARGUMENT_5 ""
16 SQLCHAR 0 41 " " 16 PROCESS_ARGUMENT_6 ""
17 SQLCHAR 0 41 " " 17 PROCESS_ARGUMENT_7 ""
18 SQLCHAR 0 41 " " 18 PROCESS_ARGUMENT_8 ""
19 SQLCHAR 0 500 " " 19 PROCESS_ARGUMENT_9 SQL_Latin1_General_CP1_CI_AS
20 SQLCHAR 0 500 " " 20 PROCESS_ARGUMENT_10 SQL_Latin1_General_CP1_CI_AS
21 SQLCHAR 0 500 " " 21 PROCESS_ARGUMENT_11 SQL_Latin1_General_CP1_CI_AS
22 SQLCHAR 0 500 " " 22 PROCESS_ARGUMENT_12 SQL_Latin1_General_CP1_CI_AS
23 SQLCHAR 0 41 " " 23 USER1 ""
24 SQLCHAR 0 24 " " 24 USER2 ""
25 SQLCHAR 0 255 " " 25 USER3 SQL_Latin1_General_CP1_CI_AS
26 SQLCHAR 0 255 " " 26 USER4 SQL_Latin1_General_CP1_CI_AS
27 SQLCHAR 0 255 " " 27 USER5 SQL_Latin1_General_CP1_CI_AS
28 SQLCHAR 0 32 " " 28 CREATED_BY SQL_Latin1_General_CP1_CI_AS
29 SQLCHAR 0 24 " " 29 CREATED_DATE ""
30 SQLCHAR 0 32 " " 30 CREATED_PROCESS SQL_Latin1_General_CP1_CI_AS
31 SQLCHAR 0 32 " " 31 MODIFIED_BY SQL_Latin1_General_CP1_CI_AS
32 SQLCHAR 0 24 " " 32 MODIFIED_DATE ""
33 SQLCHAR 0 32 "
" 33 MODIFIED_PROCESS SQL_Latin1_General_CP1_CI_AS
New table definition:
CREATE TABLE [schema].[TP_LOG_NEW](
[TP_LOGID_PK] [numeric](18, 0) IDENTITY(1,1) NOT NULL,
[TP_LOG_ID] [numeric](18, 0) NOT NULL,
[PROCESS_TYPE] [varchar](20) NOT NULL DEFAULT (),
[SEVERITY_CODE] [varchar](20) NOT NULL DEFAULT ('0'),
[TP_ERROR_REF_ID] [numeric](18, 0) NOT NULL DEFAULT ((0)),
[TP_PARTNER_ID] [numeric](18, 0) NULL,
[TP_CUSTOMER_ID] [numeric](18, 0) NULL,
[DESCRIPTION] [varchar](500) NULL,
[PROCESS_REF_ID] [varchar](255) NULL,
[PROCESS_NAME] [varchar](255) NULL,
[PROCESS_ARGUMENT_1] [datetime] NULL,
[PROCESS_ARGUMENT_2] [datetime] NULL,
[PROCESS_ARGUMENT_3] [datetime] NULL,
[PROCESS_ARGUMENT_4] [datetime] NULL,
[PROCESS_ARGUMENT_5] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_6] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_7] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_8] [numeric](18, 0) NULL,
[PROCESS_ARGUMENT_9] [varchar](500) NULL,
[PROCESS_ARGUMENT_10] [varchar](500) NULL,
[PROCESS_ARGUMENT_11] [varchar](500) NULL,
[PROCESS_ARGUMENT_12] [varchar](500) NULL,
[USER1] [numeric](18, 0) NULL,
[USER2] [datetime] NULL,
[USER3] [varchar](255) NULL,
[USER4] [varchar](255) NULL,
[USER5] [varchar](255) NULL,
[CREATED_BY] [varchar](32) NULL,
[CREATED_DATE] [datetime] NULL,
[CREATED_PROCESS] [varchar](32) NULL,
[MODIFIED_BY] [varchar](32) NULL,
[MODIFIED_DATE] [datetime] NULL,
[MODIFIED_PROCESS] [varchar](32) NULL,
CONSTRAINT [PK_TP_LOG_NEW] PRIMARY KEY CLUSTERED
(
[TP_LOGID_PK] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Hi,
I'm working on a database conversion from Sybase to SQL Server 2005 and have hit a wall with a character conversion problem when reading non-ASCII characters (encrypted password string) via JDBC.
My application runs on Solaris and accesses a SQL Server 2005 database via the Microsoft JDBC driver. The server was unfortunately specified as having a SQL_Latin1_General_CP1_CI_AS collation at installation time, and the database being accessed has taken this default. After creation the data was migrated across via DTS.
The invalid character is a dagger '†'. When read over JDBC it is converted to a question mark '?'.
In my original environment a Sybase database was accessed via JDBC driver from Solaris and the correct value was returned. The Sybase database used Latin1_General_BIN as it's collation. By way of experimentation I have modified the default collation sequence within the SQL Server 2005 database, and created a new table to hold the password. I am then able to correctly return strings containing this character from within SQL Server Management Studio, but the same problem still exists when accessing it via JDBC.
I am not sure where to focus my investigation and would be grateful for any useful pointers/advice. To me it looks like it's a JDBC driver issue as with the change in collation it works from a non-JDBC client.
Many thanks
Alistair
Hi Everybody,
I have a question regarding the running of a procedure from VC++ in SQL server.
well this is the scenario.
i have a procedure in SQL server and i am running that thru my VC++ code.
:eek:
i have a recordset class and i create an object of it and then do a obj.Open(). the procedure is fetching 24 records correctly in the query analyser and in my while(!(obj.IsEOF())) loop it gets the first record correctly but the moment it encounters obj.MoveNext(); it bombs and gives me the following error..
"Invalid Character value for cast specification ".
i don't know why this is happening
Thanks for you help.
Hi,I used SQL Server 2000 Personal Edition. I created a stored procedurehaving input parameters as smallint,tinyint,char,varchar andsmalldatetime. When I executed it by Query Analyzer, it's ok. But whenI executed it by ASP code that used ADODB.command, it showed error:Invalid character value for cast specification .Though SQL Server debugger, it showed:[Microsoft][ODBC SQL Server Driver]Invalid character value for castspecificationWhat did I do wrong? How do I fix this problem?TIAKrungPS: One of input parameters was smalldatetime, but I casting it in ASPas date as:Const adDate=7datetxt='2004/6/28'cmd.Parameters.Append cmd.CreateParameter("CoopId",adChar,adParamInput, 8, coopid)cmd.Parameters.Append cmd.CreateParameter("Addr",adVarChar,adParamInput, 100, addr)...cmd.Parameters.Append cmd.CreateParameter("Cdate",adDate,adParamInput, , datetxt)....cmd.execute
View 3 Replies View RelatedHi, I'm a new DBA and am a rookie when it comes to working with SQL Server 2005. I have been tasked with transfering an Access database to SQL Server 2005. Now I understand to use the import/export wizard, but am having problems fixing an error I am receiving. Here is the error...
Problem I
- Copying to [IS_Shared_ServicesTest].[dbo].[tblResource] (Error)
Messages
* Error 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
(SQL Server Import and Export Wizard)
* Error 0xc020901c: Data Flow Task: There was an error with input column "Contract Start Date" (115) on input "Destination Input" (80). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
(SQL Server Import and Export Wizard)
Here is the short version of the error. I realize that there is an error with the conversion and the error is in tblResource in column Contract Start Date. It is still transfering the column over, and on spot check they seem fine. Should I be really worried about an error? Or is there something that I can do with the Access or SQL server database to fix this?
In my SSIS Package I am loading data from Oracle source to SQL Destination. But while loading I am getting below error.
[OLE_DST_FORECASTSTANDARD [72]] Error: SSIS Error Code DTS_E_OLEDBERROR. Â An OLE DB error has occurred.
Error code: 0x80004005.
An OLE DB record is available. Â Source: "Microsoft SQL Server Native Client 11.0" Â Hresult: 0x80004005 Â
Description: "Invalid character value for cast specification".
[OLE_DST_FORECASTSTANDARD [72]] Error: There was an error with OLE_DST_FORECASTSTANDARD.Inputs[OLE DB Destination Input].Columns[UNITS_NEW] on OLE_DST_FORECASTSTANDARD.Inputs[OLE DB Destination Input].
The column status returned was: "Conversion failed because the data value overflowed the specified type.".
I have attached the table definition of both source as well as destination.
My source is a csv flat file. Currently I use that same flat file on SQL 2000 and SQL 2005.
On SQL 2000 it runs fine and it inserts that character as part of the string (varchar), however, it gives me truncate error on sql 2005. I already use the "Suggest Types...." and my Output columns have the correct lenght (specially that lehght of that column is only 30 char which is less than the default anyways). If I remove that character it runs fine for that column.....
This is the values that I get in my flat file for the trouble coulmn is "ATTN: JON OLSEN €€œ CTRL8 "
And the error that I get when running the SSIS is
[Flat File Source OrderDetail [1]] Error: Data conversion failed. The data conversion for column "Column 15" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[Flat File Source OrderDetail [1]] Error: The "output column "ShipToAddr1" (63)" failed because truncation occurred, and the truncation row disposition on "output column "ShipToAddr1" (63)" specifies failure on truncation.
A truncation error occurred on the specified object of the specified component.
[Flat File Source OrderDetail [1]] Error: An error occurred while processing file "C:Inetpubftprootorderdetail.csv" on data row 6.
Any help greatly approciated.....
Thank you,
Maria
Hi,
I'm working on a database conversion from Sybase to SQL Server 2005 and have hit a wall with a character conversion problem when reading non-ASCII characters (encrypted password) via JDBC.
My application runs on Solaris and accesses a SQL Server 2005 database via the Microsoft JDBC driver. The server was unfortunately specified as having a SQL_Latin1_General_CP1_CI_AS collation at installation time, and the database being accessed has taken this default. After creation the data was migrated across via DTS.
The invalid character is a dagger '€ '. When read over JDBC it is converted to a question mark '?'.
In my original environment a Sybase database was accessed via JDBC driver from Solaris and the correct value was returned. The Sybase database used Latin1_General_BIN as it's collation. By way of experimentation I have modified the default collation sequence within the SQL Server 2005 database, and created a new table to hold the password. I am then able to correctly return strings containing this character from within SQL Server Management Studio, but the same problem still exists when accessing it via JDBC.
I am not sure where to focus my investigation and would be grateful for any useful pointers/advice. To me it looks like it's a JDBC driver issue as with the change in collation it works from a non-JDBC client.
Many thanks
Alistair
In DTS/SSIS packages, How do to data validation or check for special characters and remove them at Copy column level.
thanks,
Hello, I am running out of ideas on how to get SSRS to work. I am trying get this setup with the intention to replace our Crystal Reports server. Currently I have set up the RS Virtual Directory on a Win XP box. The ReportServer database sits on another SQL2000 box.
I can connect to the http://localhost/ReportServer/ on the XP box to display the page the depicts "Microsoft SQL Server Reporting Services Version 9.00.2047.00"
When I connect to the http://localhost/Reports/, I get this error "A name was started with an invalid character. Error processing resource 'http://leej/Reports/'. Line 1, Position 2" I checked my IIS Virtual Directory properties for Reports and ASP.NET is set to v2.0.50727. I also executed "aspnet_regiis.exe -i" in the "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727" directory.
Any thought on how to fix this? I hate to let this blocker deters us from deploying SSRS.
Thanks,
John
Hi all--Given a table called "buyers" with the following column definitions in a SQL Server 2005 database:
[BUYER] [nvarchar](40) NULL,
[DIVISION] [nvarchar](3) NULL,
[MOD_DATE] [datetime] NULL
This table is laden with Unicode data and the MOD_DATE contains no data--not even NULL values, and is giving me a headache as a result. I can export this data fine to a text file, but when I create an SSIS package to attempt import to another table defined exactly the same as above in another place, I get the following messages:
SSIS package "buyers_import.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Information: 0x402090DE at Data Flow Task, Source - buyers_txt [1]: The total number of data rows processed for file "D: emp3uyers.txt" is 232.
Error: 0xC0202009 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
Error: 0xC020901C at Data Flow Task, Destination - buyers_tst [22]: There was an error with input column "MOD_DATE" (45) on input "Destination Input" (35). The column status returned was: "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 at Data Flow Task, Destination - buyers_tst [22]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (35)" failed because error code 0xC0209077 occurred, and the error row disposition on "input "Destination Input" (35)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - buyers_tst" (22) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Source - buyers_txt [1]: The processing of file "D: emp3uyers.txt" has ended.
Information: 0x402090DF at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, Destination - buyers_tst [22]: The final commit for the data insertion has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Destination - buyers_tst" (22)" wrote 0 rows.
Task failed: Data Flow Task
SSIS package "buyers_import.dtsx" finished: Failure.
Among the customizations in this package is the flag "ValidateExternalMetadata" set to False. The data itself is surrounded by " and delimited by semicolons for each field, with the header row set as the name of each column. It looks like this:
"BUYER";"DIVISION";"MOD_DATE"
"108 Joon-Hyn Kim";"TAD";""
"109 Kang-Soo Do";"TAD";""
"FS07 John Smith";"TAD";""
...
Can anyone suggest a course of action on how to handle the error when the MOD_DATE field is completely empty?
Thanks in advance,
Jonathan
I have OLE DB source which executes SP with 2 parameters and output is flat file. Every time I run I immediately get output below. How do I troubleshoot further what might be causing this?
Information: 0x402090DC at Data Flow Task, Flat File Destination [2]: The processing of file "C:UsersadminDesktopout.csv" has started.
Error: 0xC0202009 at Data Flow Task, OLE DB Source [41]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E21 Description: "Invalid character value for cast specification".
Error: 0xC004701A at Data Flow Task, SSIS.Pipeline: OLE DB Source failed the pre-execute phase and returned error code 0x80040E21.
Hi,
I am using ASPOSE License(3rd party licensing tool).
Getting Error when using encrypted License file (*.lic) in my Application .
Error is .
"Invalid character in a Base-64 string "
What does it means ?????
But Demo License file *.lic is working fine.
Please provide solutions.
Reply is highly appreciated.
Rishi
Error is
Invalid character in a Base-64 string.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.FormatException: Invalid character in a Base-64 string.
Source Error:
Line 59:
Line 60: //license = new Licensing("Ghezt4vbwif7r9cf7ra2ttbKzv76+v7GAA==", licenceFile);
Line 61: license = new Licensing("Ghezt4vbwif7r9cf7ra2ttbKzv76+v==", licenceFile);
Line 62:
Line 63:
Source File: c:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005WebSitesTestLicenseApp_CodeDemo.cs Line: 61
Stack Trace:
[FormatException: Invalid character in a Base-64 string.]
System.Convert.FromBase64String(String s) +0
Aspose.License.Licensing.M0(String key, String encryptedString) +627
Aspose.License.Licensing.A0() +753
Aspose.License.Licensing..ctor(String key, String licenseFile) +72
Demo.Initialize() in c:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005WebSitesTestLicenseApp_CodeDemo.cs:61
Demo..ctor(String licenseFolder, Page page) in c:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005WebSitesTestLicenseApp_CodeDemo.cs:37
_Default.Page_Load(Object sender, EventArgs e) in c:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005WebSitesTestLicenseDefault.aspx.cs:18
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +31
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +68
System.Web.UI.Control.OnLoad(EventArgs e) +88
System.Web.UI.Control.LoadRecursive() +74
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3035
Why would I get these errors:
" SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Invalid character value for cast specification".
There was an error with input column "UniqueID" (3486) on input "OLE DB Command Input" (3438). The column status returned was: "The value could not be converted because of a potential loss of data.".
Error: 0xC0209029 : SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Command Input" (3438)" failed because error code 0xC0209069 occurred, and the error row disposition on "input "OLE DB Command Input" (3438)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure."
I read related posts but could not figure out the error?
I Have a table with #Sample like below
=================================
#Sample
id int,
SSN varchar(20),
State varchar(2)
Â
Sample Data:
ID SSN STATE
1 999-000-000 AB
2 979-000-000Â BC
3 995-000-000Â CD
=================================
We used filter logic based on the SSN & State.
We are passing these values through variables like
Declare @State varchar(2)
Declare @SSN varchar(20)
While run time these values are lets suppose @SSN = '999-000-000' & @State='ABC'
Now the Result is displayed with the state data Like 'AB' only.
Output: 1 999-000-000 AB
instead it should give system generated error.
Here I have 2 Questions:
1. Why it is taking 1st 2 Charecters?
2. Why it does not have any system generated for length?
I can do validation with Length function for these 2 variables however if have 100 variables then it should not feasible case. So, what is the reason behind?Â
There are certain errors that does not come during compilation and it shows during execution because of late-binding concept implemented in SQL Server from 7.0 version.
The problem is when Tables are not there, SPs are created. And there is no option where we can set like 'Validate object resolution during compilation"
There are lot of SPs that are in invalid status because the tables are really not there and SP needs to be modified to reflect the correct table name. In Oracle, if I have to find the list of objects that are in invalid state (because of object resolution problems), it was possible. How do I do it in SQL?
I need a listing of all objects in my database that is in invalid state. Searched in NET but there seems to be no supporting tool also that lists invalid objects.
Pl let me know whether there exists a way by which I can get to know the invalid object lists in my SQL 2005 database
In C# .NET I have the possible to create some validations of my data, with regulary expressions. Do SQL have the same feature? I will like to do an data validation of all my insert statement inside the sql-server. Is that possible?
View 5 Replies View RelatedI have a database column that stored the weblinks like the one below :
[URL] .....
I want to extract string  "airfare" which comes  after string "cname= " and before the  string "&ccontent" .This is actually the value for cname. The entire string size can be of variable length.Â
I would like to know how can i only get the characters before the special character?
For example if the mail id is The.Champ123@gmail.com i need to extract The.Champ123 and if the mail id is TheChamp@gmail.com I need to get TheChamp.So basically i would like to get the characters from the string before '@' character.
I'm trying to Pivot and I keep getting an "Invalid Column Name" error, which I can't figure out since, if I run the query and exclude the Pivot statement, the query runs fine.
Columns
ItemNmbr Char(31) not null
SetupTime_I Numeric(19,5) not null
WCID_IÂ Char(11) not null
select ItemNmbr,SetupTime_I, WCID_I from RT010130
Results
Now run
select ItemNmbr,SetupTime_I, WCID_I
from RT010130
pivot (sum(SetupTime_I) for WCID_I in ([BLA01],[URE02])) PVT
And I get an Invalid Column Name error for both SetupTime_I and WCID_I - which, as far as I can tell, is demonstrably incorrect.
I am reading text file using OPENROWSET command. The read is successful. But the UNICODE characters in the file is not showing properly in the output.I am using a sql like below:
select
*
FROM
OPENROWSET('MICROSOFT.ACE.OLEDB.12.0','Text;Database=ppa20-igloo-fsMODELSTORECR106_GIM_UKGISourceFilesProcess;HDR=Yes;Format=Delimited(|)',
'SELECT * FROM [RUW_P_Reinsurers_Aviva_and_Others_Map.txt]')
how should I read the unicode characters correctly.
How to modify values in a SQL Database. In the table PRDDEmpmaster there is a field called email_address, and for those fields that have a value I need to change that value to add { } opening/closing "curly braces" to that field.Â
For example,
RPARSONS@YAHOO.COM becomes
{RPARSONS@YAHOO.COM} . Nulls/empty fields remain as is.   Â
I would like to write a SQL to extract a text after certain _ special character.Example :Â Relationship_Person_Type_Aunt
View 9 Replies View RelatedWhen we are getting data in a table and we want to replace characters with other characters. For example, We have a table with a street address, and there are numerous ascii character values we want to review and replace if they exist. We were looking at using a table with 2 columns, 1 containing each ascii character value the other it's preferred replacement value. Then updating the street address searching through each ascii character and replacing it if needed. Currently, we are running it through a looping process searching each individual address for each ascii character, and updating it.
View 4 Replies View Related