Transact SQL :: Mail Alerts For Deadlocks Happening On System
Oct 22, 2015I have a SQL server 2014 environment. How to set up a mechanism which will throw a mail alert whenever we get a deadlock on the system.
View 2 Replies
ADVERTISEMENT
Sql Mail Alerts & Groupwise
Sep 28, 2001Can anyone point me in the direction of a good resource
that will help us set up our system so that
notifications from alerts/jobs send emails to our
Groupwise email system?
Database Mail And Alerts
Oct 7, 2007
Hello everyone,
This is my first participation in this forum
In fact I am trying to prepare myself to earn MCITP and I faced few problems during setting up the following points
- SQL Server Database mail
- Alerts
- Operators
I want to create an internal process to inform me (via email and Net Send) if some errors happened or if some procedures run.
At the beginning I configured the Database Mail then I created new Operator (same name of domain account) and I checked all alert options (email, pager and net send) for this operator.
After that I created a new Alert (Raised based on Error Number) and I selected the created operator to be notified and I checked (email, pager and net send).
Right now everything is good and no problem in all above steps for me
But when the error raised the notification message shown at the operator screen,
But unfortunately nothing was sent to email
Note: I have a website (www.international-systems.net) with SMTP (mail.international-systems.net)
And I have created an email for this operation called (SQL_Server@international-systems.net) but nothing sent to the email
The configuration of my Database Mail was
Email Address: SQL_Server@international-systems.net
Display Name: Essam Binzghayo
Replay Email: SQL_Server@international-systems.net
Server Name: mail.international-systems.net
Port No: 25
Can you help me and try to answer the question
What was wrong in my configuration that caused failure sending email?
Thanks
Transact SQL :: Notify Only If Blocking Is Happening For More Than A Minute Or 30 Seconds
Aug 14, 2015I have configured an alert like below to track all blocked events in SQL Server across all databases and then kick start a sql job when a blocking happens which inserts data to a table, when there is a blocking in SQL server , i get an email --which is working fine and i am able to track all queries.
but, HOW to get notifications ONLY if BLOCKING IS HAPPENING FOR MORE THAN 30 SECONDS OR 1 MINUTE with out using sp_configure?
---ALERT
USE [msdb]
GO
EXEC msdb.dbo.sp_update_alert @name=N'Blocking Process',
@message_id=0,
@severity=0,
@enabled=1,
[Code] .....
SQL Server System Alerts
Feb 27, 2002Maybe a dumb question, the standard alerts like Severity 24 and 25 that come when you install SQL Server, will these alerts be called by SQL Server itself if there is a problem. I was going to set up notifications for these but wasn't sure if it was worth the trouble.
View 1 Replies View RelatedTransact SQL :: Table Locking Happening When Removing Huge Data
May 14, 2015declare @error int, @rowcount int
select @rowcount = COUNT(1) FROM STG_BCDR;
while @rowcount > 0
begin
BEGIN TRAN Deletion
[code]....
Above code i try to delete records batch by batch to avoid table locking at BCDR table.total records in this BCDR table is 40,000 records. However I run the code at execution plan, the BCDR table still clustered index scan which means that the locking still happend.
If i change the delete top (5000)...... to delete top (5).... then thre is clustered index seek, which is good..The problem here is each time only delete top 5 records which is means it will realy take very long time to remove those data.
how to cater the situation inorder for me to delete those huge data without table locking happend. If table locking happend , then other user will not be able to access this table at the same time.
SQL Server 2008 :: Monitor Database Growth And If Any DB Grown By 20% Send Mail Alerts
Apr 30, 2015Is there any automated script available to - "Monitor Database Growth and if any DB is grown by 20%, sending mail alerts"? If not, what is the approach to write the T SQL script ?
View 5 Replies View RelatedTransact SQL :: WMI Alerts Errors
Jul 25, 2008I am having a problem registering any WMI Event in the ootMicrosoftSqlServerServerEvents namespace on all of my SQL Servers. It doesn't matter what instance I append behind this either. MSSQLSERVER fails as will any other named instance. I get the same exact errors on every server which isn't surprising since they currently all have identical configurations, excluding hardware:
"The @wmi_query could not be executed in the @wmi_namespace provided. Verify that an event class selected in the query exists in the namespace and that the query has the correct syntax."and it doesn't apply because my servernames are all 8 characters long, and I already applied CU6 to the servers months ago. The current @@Version on all Servers is:
Microsoft SQL Server 2005 - 9.00.3233.00 (X64) Mar 6 2008 21:58:47 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
the only differece is that some of them are x86 instead of X64, but the problem occurs on the x86 servers as well.What is interesting is I can register other WMI namespaces just fine, like the following from Jason Massies Blog:
EXEC msdb.dbo.sp_add_alert
@name =N'Test',
@enabled =1,
@delay_between_responses =0,
@include_event_description_in =0,
@wmi_namespace =N'.ROOTCIMV2',
@wmi_query =N'SELECT * FROM __InstanceModificationEvent WITHIN 600 WHERE TargetInstance ISA "Win32_LogicalDisk" AND TargetInstance.FreeSpace < 100000'
GO
I can create the WMI Alert on my laptop which is build 3054.
Transact SQL :: Sessions Need To Have UPDLOCK To Avoid Deadlocks
Nov 21, 2015The benifit of UPDLOCK is that it avoids deadlock in case both sessions run the below query at the same time.The table has clustered index on ID column
----session 1 --------
begin transaction
select * from a1
update a1
set id = 22
where id = 2
----session 2 --------
begin transaction
select * from a1
update a1
set id = 22
where id = 2
Now to avoid deadlock in the above scenario we should use (UPDLOCK) hint in the select statement.Now my question is that deadlock will be avoided in this case when both the sessions use UPDLOCK hint. If only one session uses UPDLOCk and other does not then there will be deadlock .For example session 1 uses UPDLOCK hint this will hold the U lock on the row, but the session 2 does not use this hint and apply shared lock on the same row. Now there will be deadlock when session 1 tries to update the record and is blocked by shared locks of session 2. same will be the case with session 2 and both will wait for each other and hence dead lock.so what steps can be taken to avoid deadlocks in this case. I do not want to use Snapshot isolation.
Transact SQL :: Deadlocks On Server From Select Statements?
Feb 13, 2014I am not sure if i am looking correctly at the deadlocks but i see deadlocks between two select statements.These statements are being run through an application. Below is the table schema from where the select is being performed
CREATE TABLE [dbo].[CMS_LOCKS7](
[PARENTID] [int] NOT NU, --we have a non clustered index on this column
[CHILDID] [int] NOT NULL, --we have a non clustered index on this column
[ISMEMBER] [int] NOT NULL, -- we have a non clustered index on this column
[ORDINAL] [int] NULL,-- we have a non clustered index on this column
[Code] ....
Transact SQL :: Reducing Deadlocks From Conflicting Delete Statements
Jun 15, 2015I am working on an app that getting quite a few deadlocks due to delete statements. I have turned on the sql trace flags and pulled the offending delete statements out of the ERRORLOG and trying to mesh those up with the indexes defined on the table, etc. looking to see if there is anything that can be done strictly from the db side (no app code change) to reduce/eliminate these deadlocks. I have ran some tests/played around with RCSI and even disabling lock escalation but neither have improved my results.
What I have done is to search the errorlog file for DELETE FROM Tablename, output those matching lines, then sort of normalize the literal values to # or XYZ, open in Notepad++, removed trailing whitespace + dups and sort to come up with these results for the unique list of offending T-SQL statements (a LOT easier to read in text editor so sending screen cap.
Open this url in new tab [URL] ....
Transact SQL :: Query To Give Results Of All Configured Alerts Occurring History
May 14, 2015We created sql alerts on all our sql servers environments. Now, i want to see each sql server which sql alerts so far got fired and which one never occurs. is there any way, we can get this information from any system database?
View 9 Replies View RelatedSystem.net.mail
May 26, 2008Hi all,
I am using system.net.mail namespace to send the mails.My problem is can i send the mail to more than one people using a single MailAddress object.Below is the code i am working with..MailAddress addressFrom = new MailAddress("admin@ecanarys.com", "admin");
string[] strTemplateNames = Regex.Split(strTemplateAdded.Trim(','), ",");SqlConnection conn = new SqlConnection(System.Configuration.ConfigurationSettings.AppSettings["ConnString"].ToString());
conn.Open();for (int i = 0; i < strTemplateNames.Length; i++)
{SqlCommand cmd = new SqlCommand();
cmd = conn.CreateCommand();cmd.CommandText = "select emailID from Users where UserName in(select distinct Approvers from ApproversList where template='" + strTemplateNames[i].ToString() + "')";
SqlDataReader dr;string strTo = "";
dr = cmd.ExecuteReader();while (dr.Read())
{strTo = dr[0].ToString() + ";";
}
dr.Close();MailMessage mail = new MailMessage();
mail.To.Add(new MailAddress(strTo));-------//Exception: The string is not in the specified formatmail.Subject = "This is a testmail.";
mail.Body = "This is a mail which is send to the approvers for the following templates.";SmtpClient client = new SmtpClient();client.Host = "100.100.110.198";
client.Send(mail);
mail.Dispose();
}
conn.Close();
Transact SQL :: How To Find Space Available Or Send Space Alerts In Percentage
Nov 26, 2015I am using the below script to get space alerts and now i am interested in sending alerts if for any drive space available is Less than 10% or 15%.. how to convert beelow code to find in %
Declare @Drives Varchar(20)
DECLARE @Spaces Varchar(50)
DECLARE @availableSpace FLOAT
DECLARE @alertMessage Varchar(4000)
DECLARE @RecipientsList VARCHAR(4000);
CREATE TABLE #tbldiskSpace
[Code] ....
Sending Emails With System.Net.Mail To Addresses From A SQL Query
Sep 13, 2007I have the following code on a form:
<asp:SqlDataSource ID="building_a" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_a_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="a" Name="BUILDING" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="building_b" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_b_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="b" Name="BUILDING" Type="String" />
</SelectParameters></asp:SqlDataSource>
<asp:TextBox ID="subj" runat="server" Width="500px">Subject</asp:TextBox><br /><br />
<asp:TextBox ID="messg" runat="server" Rows="20" TextMode="MultiLine" Width="500px">Message</asp:TextBox><br /><br />
<asp:Button ID="bldga" runat="server" Text="Building A" OnClick="Button1_Click" /><br /><br /><asp:Button ID="bldgb" runat="server" Text="Building B" OnClick="Button2_Click" /><br /><br />
<asp:Label ID="resultLabel1" runat="server" ForeColor="red"></asp:Label>
And I have the following code behind:protected void Button1_Click(object sender, EventArgs e)
{SmtpClient smtpClient = new SmtpClient();
MailMessage message = new MailMessage();
try
{MailAddress fromAddress = new MailAddress("me@mydomain.com", "My Name");MailAddress toAddress = new MailAddress("them@theirdomain.com");
message.From = fromAddress;
message.To.Add(toAddress);
message.Subject = subj.Text;message.IsBodyHtml = false;
message.Body = messg.Text;smtpClient.Host = "myhost";
smtpClient.Send(message);resultLabel1.Text = "Email sent!";
}catch
{resultLabel1.Text = "Send failure";
}
}
The queries get e-mail addresses from a SQL database for all people who work in a particular building.
The buttons will send an email if I give a To address.
How do I write the code so that clicking on the "Building A" button will send the e-mail to the addresses from the query results individually?
Any ideas?
Database Mail Attachments Filling Up The System Drive!
Apr 30, 2007Hi all,
Has anyone run into this issue before?
My company uses database mail extensively for alerting and the like, and most emails sent have attachments. We've put in place procedures for removing emails older than a month from the MSDB database, however we've now had a client server completely run out of the disk space due to attachments being stored in the C:Documents and SettingsUserLocal SettingsTemp folder!?!
When I check the sysmail_delete_mailitems_sp sproc, it only removes entries in the MSDB tables, and doesn't remove these temporary files in the temp directory.
Does anyone know why SQL Server stores them in the temp directory of the service account user, as well as how we can remove them (apart from manually deleting the files), as we need to have an automated process for cleaning up emails, and at the moment SQL Server 2005 doesn't handle this very well.
I've checked this on our test server as well, and we're getting the same there, and this server is running the latest SP2 + hot fixes.
Thanks,
Reece.
Request For The Permission Of Type System.Net.Mail.SmtpPermission
Dec 5, 2006Hi all
I have some problems with sending Mail over System.Net.Mail ...
I have made a C# Class which sends mail, and it works fine.
Now I have added this assembly to SQL Server 2005,
I made the SQL function and so on.
When I try to run it I get the following message:
Msg 50000, Level 16, State 1, Procedure SendMail, Line 114
Request for the permission of type 'System.Net.Mail.SmtpPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Would be very very happy for any comments !!
Thanks and best regards
Frank Uray
Putting System Variables In A Send Mail Task
Jul 13, 2006KB Article 906547 suggest that it's possible to have system variables in the Subject & Body of a Send Email Task. Such as this:
"Package>>> " + @[System::PackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System::StartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName]
Or this in an OnError event handler:
"Error in the task: " + @[System::SourceName] + "with the ID: " + @[System::SourceID] + " has failed at: " + (DT_WSTR, 20) @[System::ContainerStartTime] + "."
But when I do this I just get this exact text, no variables.
I'm obviously missing something basic but I can't find it. Can anyone offer a suggestion please?
Failure Sending Mail: The System Cannot Find The Path Specified.
Aug 30, 2006I have had a development XP workstation with RS2000 and IIS sending reports via email for 6 months straight with no problems.
Today my subscriptions are failing with
Failure sending mail: The system cannot find the path specified.
Been searching and digging for hours, and if anyone has any ideas they are greatly appreciated.
Transact SQL :: How To Find Mail Is Queued
Jul 19, 2015I want to send an email twice a day, from database. So I have planned to make a storedproce which will be called by a job (which will select some record from one table and put it in other table based on a flag) but I want to run it in a transaction so that if email is send successfully then only it should commit else it should rollback.
How can i find that "Mail queued" now i should commit.
Transact SQL :: Send Mail If Any Records Returned
Nov 4, 2015I would like to use sp_send_dbmail, but I only want to send mail if there are any records returned.
I have found some solutions, but you must always first check if there is any record and later you can call "sp_send_dbmail" and within you must again query database for results.
What I want to do is to query database just once, because I dont want to use server performance two times. Query is bit complicated.
Transact SQL :: Dashes Appearing In EMAILS Sent By Database Mail
Sep 14, 2015I have created a job which executes a procedure which executes and creates logs of StartTime and EndTime and records affected. The last step of the job sends mails to recipients from the logs table. Though I get the info correctly I get all annoying dashes for 4-5 lines between each line of message. How to remove the dashes.
Below is the code i use to send mails.
EXEC msdb.dbo.sp_send_dbmail
@profile_name='SQL Mail Service',
@recipients='biscribbler@gmail.com',
@copy_recipients='biscribbler@gmail.com',
@subject='SOFT SCRUB Completed for LiveDB',
[Code] ....
Transact SQL :: Create Job Which Automatically Convert Output Into Excel And Send Mail
Oct 31, 2015I have an existing MS SQL database (2008 R2). I have a very simple SQL script. I need to automate this script means wants to create a job which runs on a Friday basis and save the output results of the query as a excel file and then automatically sends the mail to everyone.
View 9 Replies View RelatedWhat's Happening To This?
Feb 25, 2006I have 2 aspx pages. one is "login.aspx" and the second is "test_connection.aspx". the "login.aspx" is using the membership class for my website's security. if u have have restarted your computer and you first load this "login.aspx", this will work fine and you will see that you can create a user. when you load (or view) next "test_connection.aspx" you will get this error message:
System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'sqluser1'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
If I will restart my computer and I will load first the "test_connection.aspx", this page will work just fine and if you will load next "login.aspx", i will get this error message:
Cannot open user default database. Login failed.
Login failed for user 'YECIAASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'YECIAASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
the page "test_connection.aspx" is using an sql username i have created. I am only using one database in this project and thats it ASPNET.mdf
what's happening? i cant understand. I dont know what im doing wrong. i am very new to this dotNET and MS-SQL. im not sure if this has relation to the other problem i have on the other thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=254568&SiteID=1).
PLS HELP.
Transact SQL :: Adhoc Updates To System Catalogs Are Not Allowed
Oct 27, 2015When i am trying to update the data inside the ' sys.sql_modules' view, i am facing the following error:- 'Ad hoc updates to system catalogs are not allowed.' Is there any alternate way to update the data inside the ' sys.sql_modules' view?
View 2 Replies View RelatedNo Transactions Are Happening
Dec 24, 2007i was working on a production server, and have stopped the sqlserver service along with the sql server agent. since i had to copy a MDF file . now i started the service again . but i find that there are no transactions happening ....what could be the reason.
View 8 Replies View RelatedInsert Is Not Happening
Jan 12, 2008Hi,
Im facing one problem When more than one user tries to insert record through the application only one users data is getting inserted. Wat might be the problem?
This is the stored proc im using..
create
proc [dbo].[GSK_insertregion] (@Country varchar(50),@Userid int,@RegionId varchar(50))
as
begin
insert
into UserHierarchy(Country,Userid,RegionId) values(@Country,@Userid,@RegionId)
end
Please help..
Sundaresan.R
Logging Not Happening
May 23, 2008Hi,
I set up my package for logging to SQL Server. I set up a connection manager for the logging, but did not specify a database. Doesn't that mean that the logging should default to msdb.sysdtslog90?
But when I check the table, there's nothing in it, after I run the package.
What gives?
Database Connection Not Happening. Please Help!
Jan 13, 2004Hi
I have deployed a website on a server having Windows2000, IIS5.0 . It uses SQL Server 2000 which is on another remote server. While developing I used the visual tools in VS.net to make a connection and have used DYnamic properties of the connection object to map the connection string to the entry in to the config file.
This works fine on my developement machine which has IIS and SQL Server 2000 on the same machine.
The entry in the web.config for my connection string is:
value= " server=xxx.yyy.com; Trusted_Connection=yes;provider=SQLOLEDB.1;Initial Catalog=events; User id=myuser; Password=password;"
where xxx.yyy.com is the server running SQL Server2000.
I do not get any error but the conncetion doesnot happen and my datagrid doesnot get filled.
The code for creating the connection is designer generated code.
Any clues?
-svp
Mysterious Backups Happening
Jul 11, 2000I'm no guru but this one has me stumped!!
Each day there is a backup occurring of a database but nothing is scheduled either as a Job or under the database backup scheduling option.
Any suggestions greatly appreciated.
Thanks.
Can't Find Out Where This Insert Is Happening.....
Sep 6, 2007Hello people, I don't expect anyone to know the answer to this but I guess we'll see huh?
I'm using Microsoft SQL Server Management Studio to do all my SQL stuff, and one of the tools that comes with this is a program called Microsoft SQL Profiler 2005. Anyways, so I'm using this profiler to capture SQL processes in the background while I work with the front end.
Here is a problem I'm facing... I am looking at this table right... and I see that when I do this certain process on the front end, it inserts 3 rows into the table. So I'm thinking "I know that on the tracer, I should be looking for an insert or a Stored Procedure with and insert in it."
So I use the tracer on the front end process and it shows me all the stored procedures that happen during the process of inserting these 3 rows into this table (btw this process is doing other things besides inserting stuff into this table, but it's what i'm currently working with at the moment.)
So what I do here at my job is I take this code, tweak it to work for our front end, and wah lah.... we're good to go. So in saying that, I make my own stored procedure and I all these stored procedures that are happening.
My result......
I get only 2 row inserts into the table.... the 1st row and the last row..... the middle row isn't inserted for some mysterious reason. I tried checking all the stored procedures for unique information pertaining to that specific row insert but to no avail I couldn't.
So my question to you guys is.... is there anything I'm overlooking that could possibly be inserting that row in the table? Thanks guys!
Tables Seem Too Big - Timeouts Happening
Jul 23, 2005I have two problems I need some help with.First, I've just inherited a system and am delving into a few timeoutproblems that are causing problems for the users.Now, if I do a simple select * from the table (which looks to be thecause of the problem at this stage) in QA, I get the results back inless than a second. If I open the table in EM it takes about 10. Isthere a difference in viewing the data this way ? I'm used to EM beingvirtually the same speed. There is only one row. Minor questionreally, just something I'd like to understand if there is adifference.CREATE TABLE [QUERY] ([QUERY_ID] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[CAT_ID] [numeric](18, 0) NOT NULL ,[QUERY_DESCR] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[USER_NAME] [varchar] (40) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[USER_ID] [int] NOT NULL ,[IND_EURO] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULLCONSTRAINT [DF_QUERY_IND_EURO] DEFAULT ('N'),[IND_DGCOLUMNS] [char] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL CONSTRAINT [DF_QUERY_IND_DGCOLUMNS] DEFAULT ('N'),[NO_GROUPS] [int] NOT NULL CONSTRAINT [DF_QUERY_NO_GROUPS] DEFAULT(0),[NO_FIELDS] [int] NOT NULL CONSTRAINT [DF_QUERY_NO_FIELDS] DEFAULT(0),[NO_LINES] [int] NOT NULL CONSTRAINT [DF_QUERY_NO_LINES] DEFAULT (0),CONSTRAINT [PK_QUERY] PRIMARY KEY CLUSTERED([QUERY_ID]) WITH FILLFACTOR = 90 ON [PRIMARY] ,CONSTRAINT [FK_QUERY_QUERY_CATEGORY] FOREIGN KEY([CAT_ID]) REFERENCES [QUERY_CATEGORY] ([CAT_ID]) ON DELETE CASCADE ON UPDATE CASCADE) ON [PRIMARY]GOI don't think any re-indexing has been done on this (or the othertables in the db). I was wondering if constant adding/deleting rowscould cause the index to be massive and in need of a good clear out.Any pointers would be appreciated. From what I can tell, there wassome problems trying to get replication to work. I need to dig deeperto see if this is now correct.-------------------------Secondly, there is a another table in the same database.CREATE TABLE [FIELD_DATA] ([ID] [numeric](18, 0) IDENTITY (1, 1) NOT NULL ,[DATA_ID] [numeric](18, 0) NOT NULL ,[FIELD_ID] [numeric](18, 0) NULL ,[FIELD_CODE] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL ,[FIELD_VALUE] [numeric](15, 5) NULL ,CONSTRAINT [PK_FIELDDATA] PRIMARY KEY CLUSTERED([ID]) WITH FILLFACTOR = 90 ON [PRIMARY]) ON [PRIMARY]GOIt holds approx 4 million rows. The rest of the tables have minimaldata and about the same amount (consider them the same if you will).Now, another 'copy' of this database is held elsewhere (differentclient data) and this holds 40 million rows. The difference is thatthe first DB is 4.5GB and the second 6.5GB (approx). Does this provemy theory that re-indexing would be a good idea ?ThanksRyan
View 3 Replies View RelatedWhat Will Be Happening To The SSRS While DB Mirroring?
Nov 2, 2006hi there,
can the SSRS works with DB mirroring?
If yes, how to do it?
I just tried to enble mirroring for reportserver and reportservertempDB, but it doesnt work after failover.
Any idea ?