I have to send an array, which are generated in C++ (or C#) to an SQL-INSERT. Something like this:
INSERT INTO Table1
(Col1,Col2)
VALUES(:a,:b)
// a and b are my arrays//:a=A,B,C,D.....//:b=1,2,3,...
Is there any way to do something like my prototype in MS SQL Server? If yes how should be my INSERT?Â
I would like to INSERT an array of integer into a table in MSSQL Server, then count the number of rows in the table with c++ using ODBC. Here you find my code to do this task:
#include <windows.h>
#include <stdlib.h>
#include <stdio.h>
#include<tchar.h>
#include <sql.h>
#include <sqlext.h>
#include<sqltypes.h>
[Code] ....
In my code, I would like to Insert the array and then count the number of rows:
SQLTCHAR Statement[] = _T("INSERT INTO information1(Wert1,Wert2) VALUES(?,?) select count(*) as a from information1 ") ;
Problem : My expectation is, that first 9 rows are inserted into table then comes 9 as result to user (if the table is empty) but this code returns me 1 if first the table is empty. If the table is not empty, it returns 1+number of  existing rows in the table. If I take a look inside the table, the 9 rows are successfully inserted in it. Only the number of rows in the table is wrong.
Hint : If I monitor the database using SQL Profiler. It looks like this:
Why this statement doesn't work correctly?
I want to pass and array of ids to a procedure for inserting i a relation table.
I found some examples in other posts, but had problems getting them to work.
I just want to pass a parameter with value like '1,45,89' to the procedure, then loop through it to insert the relations.
(I´m using sql server 2000), had some problem with examples with strpos then.
Any hints ?
peace.
How to do this ?
==============================
CREATE procedure dbo.AddTb2FromTb1
@Tb1No nvarchar(1000)
as
insert into Tb2 (*)
select * from Tb1
where Tb1 IN (@Tb1No) /* How to Passing an Array to a Stored Procedures ??? */
==============================
dbo.AddTb2FromTb1 'No001' is Work !
dbo.AddTb2FromTb1 'No001,No002,Bo003' is not Work !
Dear all,
I need to pass an Array of string from .NET in C# to a store procedure. I do not know in advance the size of the array.
When this array is pass to my store procedure, I need to copy the all content of the array into an SQL table.
Based on that I have different question :
1 - is it possible to pass an Array[] as a strore procedure parameter ?
2- If yes what is the syntax to declare an input parameter as an array ?
3- Does the array as parameter is the proper way to pass unknown amount of parameters ?
4 - If not what are the other solution ? I read some stuff on XML document but did not find any real example which explain clearly how it should be done
Thnaks for your help
regards
Serge
Hi,
I am trying to get the selected options from a listbox and either pass a SqlDataSource object the array or loop through it and pass each element of the array. I then need to modify the returned databtable to graphing function, but first drop the last column. I was wondering if anyone can help me with the following:
1. Pass an array into SqlDataSource Select OR 2. Pass a single argument into the Select statement and populate a datatable without it writing over the current row each time it iterates through the foreach statement. I am looking for the dataview to append to dt each time it loops. Is there a property for dataview that behaves like the "ClearBeforeFill" for table adapters?3. Update a parameter programmatically
Below code works, but I think it can be more efficient. Any suggestions would be greatly appreciated.
Thanks in advance!!
DataTable dt = new DataTable(); DataTable dt2 = new DataTable(); DataView dv = new DataView();
foreach(ListItem liOptions in ListBox1.Items) { if(liOptions.Selected) { SqlDataSource1.SelectParameters.Add("Parameter1", liOptions); dv = (DataView)SqlDataSource1.Select(DataSourceSelectArguments.Empty); dt2 = dv.Table; dt.Merge(dt2); dt2.Dispose(); SqlDataSource1.SelectParameters.Clear(); } }
if (dt.Rows.Count > 0) { Graph(dt); //Pass original datatable (dt) to Graph(); dt.Columns.RemoveAt(2); //Reformat datatable (dt) and remove last column before binding to Gridview1
GridView1.DataSource = dt; GridView1.DataBind(); } else {
errorMessage.Text = "No data was returned!"; }
I'm looking for a way to pass an array of values as a parameter to a query in a table adapter. For example I want to run a query something like:SELECT * FROM menu WHERE menu_role IN (@roles)And I could pass something like 'RegisteredUser, SuperUser, OtherUser' to the @roles parameter.For some reason I can't figure out a way to do this. Any help would be greatly appericated.Thanks,Ryan.
View 6 Replies View RelatedWell, I managed to write a Stored procedure that updates some records in the Northwind Database based on the ProductIDs passed to the SP as a list of strings. This is the Alter version of the SP:USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[gv_sp_UpdatePOs] Script Date: 06/10/2007 12:07:54 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROC [dbo].[gv_sp_UpdatePOs]
(
@IDList varchar(500),
@ReorderLevel int,
@ProductName nvarchar(30)
)
AS
BEGIN
SET NOCOUNT ON
EXEC('Update dbo.Products
SET ReorderLevel = (' + @ReorderLevel + ') ,ProductName = (''' + @ProductName + ''')
WHERE ProductID IN (' + @IDList + ')')
END
----------------------
THis works fine inside Sql Server 2005 Query analyser.
But when I setup an aspx page with an objectDataSource inside the page attached to an xsd file where the Products table is located. When I try to add new query to the tableadapter inside the Products table and point to the stored procedure in the wizard I get this error: " the wizard detected the following problems when configuring TableAdapter query "Products" Details: Generated SELECT statement. Incorrect suntax near ')'.
Any help would be appreciated
And can someone convert it to support XML instead of list of strings. thanks.
I have 2 questions.I am trying to write a stored procedure to update a table. I am tryingto pass a variable that represents the name of the column/field andanother for the value that I am changing.For example:@FieldName VARCHAR(100)@FieldValue VARCHAR(100)ASUPDATE tblTHETABLESET @FieldName = @FieldValueFirst is it possible to use a variable as the column/field name? Ifso, how do I go about it?Also, it would be nice if I could have the @FieldName and @FieldValuevariables as arrays. Is that possible?Thank-you for any assistanceBill
View 2 Replies View RelatedI have a table that looks like this:
RecordId
PictureId
KeywordId
111
212
313
421
522
623
725
817
932
1044
I need to run a query where I pass in an unknown number of KeywordIds that returns the PictureId. The 'IN' clause will not work because if a KeyWordId gets passed into the Stored Procudure the PictureId must have a record with each KeyWordId being passed in. For example, lets say you need to see the result of all PictureIds that have both 1 and 2, the correct result set should only be PictureId 1 and PictureId 2.
Im going crazy trying to find a simple solution for this. Please advise.
Hi, I m using sql 2005 as a back end in my application...
I am useing Store procedure..for my data in grid..
ALTER PROCEDURE [dbo].[ProductZoneSearct]
(
@Productid char(8),@Proname char(8),@radius int,@mode varchar(5) = 'M',@Zone nvarchar(1000),)
ASSET NOCOUNT ON;Create Table #Product (ProductID int, TimeEntered datetime, DateAvailable datetime, Productname varchar(80), City varchar(50), State char(4),Miles decimal, Payment varchar(40),UserID int, Phone varchar(15))
Insert #Product Select ProductID , TimeEntered, DateAvailable, Productname ,City,State,miles,Payment ,Miles, UserID, Daily, PhoneFrom [tblproduct] Where city IN (@Zone)
Select ProductID TimeEntered, DateAvailable, Productname City,State,miles,Payment ,Miles, U.Phone As phoneNumber, Company, , L.Phone As cmpPhone From #Product As L Left Join (Select UserID, Company, Phone, From [User]) As U On U.UserID = L.UserID Order By DateAvailable
if i pass value in "where city in (@Zone)" and @Zone ='CA','AD','MH' then it can not get any result..but if write where city in ('CA','AD','MH') then it give me perfact result..
I tried to below syntax also but in no any user Where city IN ('+@Zone+')
In short if i pass value through varibale (@Zone) then i cant get result...but if i put direct value in query then only getting result..can anybody tell me what is problem ?
Please Hel[p me !!!
Thank you !!!
I am trying to create a "Loan Ledger Card" in SSRS which does the calculation up to report extracting time. I was able to create it on Excel (Click to download the Excel file) as we can calculate amounts for each installment based on Row and Column name. You can test it by putting any amount (Here it should be below 62000 as it is the total balance of loan) in "Amount Paid" yellow cell and see the effect.
I have made a selection in SQL (attached query and result in screenshot). It calculates the total paid amount by now on the first row, and all due amounts in other rows. Basically, It should first deduct the interest from first row, then principle, same process for second row and so on until it covers the whole paid amount.
SELECT
'0' As RN
,memrepay.lnr
,'Repayment' AS Type
,SYSDATETIME() AS NOW
,SUM(memrepay.mprinc) As PrincPaid
,SUM(memrepay.mint) As IntPaid
[Code] .....
How can I do the similar calculation of Excel file in "SQL query" or "SSRS custom code"?
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies View RelatedI have an SSIS package. In my control flow I have an Execute SQL Task and a data flow task. In my Execute SQL Task in the SQL Statement I have (select dbo.to_date(getdate()) as process_date) its a direct input with a result set. It gets Getdate as (processed_date) is declared. I have set no parameters, but I have set a Result Set. Also, I have set a global variable in the scope where I passes the date (processed_date)
In my Data Flow, I have an OLE DB data source with the following SQL statement in my SQL Command.
I am trying to pass down the variable as the ? .
It works when I pass it only to: lr.processed_date = ?
But I get an error when I pass it down to the : and ? between cav.begin_date and cav.end_date
SELECT distinct
acc.account_num,
FROM
cust_version_slow cvs
inner join cust_acco_version cav
on cus.cust_id = cav.cust_id
and ? between cav.begin_date and cav.end_date
inner join bia.dbo.acct acc
on cav.acco_id = acc.acco_id
inner join bia.dbo.account_version_slow avs
on acc.account_id = avs.account_id
and ? between avs.begin_date and avs.end_date
inner join bia_org ('02','2,3,4,5,6,7,9,10') boh
on cvs.branch_code = boh.branch_code
inner join accou_version_profit accM4
on acc.acco_id = accM4.acco_id
and ? between accM4.begin_date and accM4.end_date
where
lr.processed_date = ?
I need to pass down the same variable (processed_date) which is ? in all the ? in red
Thanks,
Delovan
Hi everyone I am trying to pass a parameter to a USE command within the body of a cursor. I keep getting an error. Here is my code.
Code Snippet
DECLARE @SQLText AS NVARCHAR(4000)
Declare @SQLText2 as NVARCHAR (2000)
DECLARE Cursor_Trial CURSOR FOR SELECT name FROM sys.sysdatabases order by name
Declare @name as varchar(255)
Open Cursor_Trial
FETCH NEXT FROM Cursor_Trial INTO @name
WHILE @@FETCH_STATUS = 0
BEGIN
Use @name --------This is where I'm getting the error
Set @SQLText2 = @name
select @SQLText2, * from sys.database_principals
where type_desc='DATABASE_ROLE'
and name = 'xxxxx'
FETCH NEXT FROM Cursor_Trial INTO @name
END
CLOSE Cursor_Trial
DEALLOCATE Cursor_Trial
As you can see I am trying to pass the next database name into the body of the cursor so that the query will pull the role information only for the current database in the loop. Any thoughts or tips? Is there a better way to accomplish what I'm trying to do here?
Hello all,I'm writing a site with one page that uses the session variable (User ID) to pick one user ID out of a comma separated list in the field Faculty. The default parameterized query designed in the SqlDataSource wizard only returns lines that contain an exact match:SELECT * FROM tStudents WHERE ([faculty] = @faculty) The query: SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') works as I need when I hard code the query with a specific user ID into the SqlDataSource in the aspx page. It will not work if I leave the @faculty parameter in it:SELECT * FROM tStudents WHERE ([faculty] LIKE '%@faculty%') e.Command.Parameters works to replace the @Faculty with a user ID, but again, adding the single quote and percentage sign either causes errors or returns no results. I've tried several variations of: string strEraiderID = "'%" + Session["eRaiderID"].ToString() + "%'"; e.Command.Parameters["@faculty"].Value = strEraiderID;no results are returned, not even the lines returned with the default select query.How do generate the equivalent of SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') into the SqlDataSource? Thanks much!
View 3 Replies View RelatedHi, I was wondering if there is a method (other than BULK INSERT) to insert a (C++) application level array into the database, I have a variant type array populated with values that I want to insert, perhaps using ADO objects in quick time!
Hi all,Is it possible to pass command line arguments to a package when running it from within VS? I want to set the value of a variable via the commandline, and found that you can to this in DtExec with the "/set Package.Variables[...].Value;..." syntax. According to the docs, you should be able to pass the same argument via the 'CmdLineArguments' property in the 'Properties' dialog of an SSIS project in VS (CmdLineArguments. Run the package with the specified command-line arguments. For information about command-line arguments, see dtexec Utility), but unfortunately, this doesn't seem to work (even though the exact same argument does work when entered in DtExec)
Any help would be greatly appreciated :-)
Steven
Hi,
I'm looking into the idea of building an enhanced version of dtexec.exe that builds in some extra logging features. My utility will execute packages using the Package.Execute() method.
Thing is, I'd still want to support all of the command-line options that dtexec supports. For example, my utility should accept "/set package.variables[myvariable].Value;myvalue" and pass it through to the executing package but I can't find a way of doing it using Package.Execute().
Am I missing something or is this just not possible?
Thanks
Jamie
[Microsoft follow-up]
Hi,
I have created a job in SQL Server 2005 in which one of the step executes a .NET console application which is created in .NET to update some status to database before the next step. i need some help in sending some status back to sql job when i come accross any problem in the console application for ex when there is a exception i need to send some status to the job, so the job gets failed permanently. i tried few other methods of updating some temporary status database with this error information and have another intermediate step in the job to check for the status... it worked but i dont like doing it. please let me know if there is any other method to do this.
Thanks in advance
Hariharan
Hi,
I'm very new to SSIS and I€™m trying to do the following in a SQL task
RESTORE DATABASE @DatabaseName FROM DISK = @Backup WITH FILE = 1, MOVE @OldMDFName TO @NewMDFPath, MOVE @OldLDFName TO @NewLDFPath, NOUNLOAD, REPLACE, STATS = 10
I'm using an OLE DB connection and I have mapped user variables to the various parameter names. Unfortunately when i test the above command it fails on must declare the scalar variable "@DatabaseName". How can i get my values to be substituted into the command?
Many thanks
Martin
I have a process that is running on the os. This process is picking up FTP files every 5 min, it renames them so not to confuse them with the new files, copies all renamed files into one file to be used by bulk insert, runs the bulk insert to populate a table, and then runs the stored procedure that scrubbing the data and insert it into another table. For every transaction that I do in my stored procedure, I do the error checking as follows:
IF @@error <> 0
BEGIN
ROLLBACK TRANSACTION
RETURN
If my stored procedure encounters an error, return statement will stop it from running. If this happens, I need to stop the process that is running on the os as well.
Questions:
How can that be accomplished?
How to restart the stored procedure ones the error has been corrected?
Thank you for your help.
Dear All -
iam facing a problem for passing a parameter to update paradox table statment in the OLE DB Command
Briefly an OLE DB Command exist between OLE DB Source and OLE DB destination , all i want it to send the data that flow from the OLE DB Source to the update paradox table statment in OLE DB Command ,
i use the parameter annotation which is "?" to refer to the parameter in the update where clause and it sucess when i use the OLE DB Command to connect to SQL Server DB but when i use it with the Paradox Table an error appear saying that there is more than one data source column with the name "?" The data source column names must be unique.
i dont know what that means is it means that "?" it consider "?" as a column or what or is there another way to send parameter to Update statment for the paradox table differ from the SQL Server Update statment which is the "? "
i hope someone help me as soon as possible because i need it in work sOOon
Thanks,
Maylo
On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer form that logged in users have access to.
it has 2 questions including a text box for Q1 and dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
Be very helpful if somebody could check the code and advise where the problem is??
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
</table>
Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</asp:WizardStep>
Event Handler
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
}
All,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
I would like to know on how to pass a column name into a particular variable.
Example
Table_name    Column_name
Tablenm       Name
Tablenm       Age
Tablenm       Phone
The output will be:
ColName     Value
Name       Alexander Grahambell
Age         32
Phone       123456
Name       Sanosuke Sagara
Age         35
Phone       246790
I have an SP that is working, it creates a Union between 3 tables then creates a single table - I am using Visual studio Grid Control to view this by a browser, its working. Â at the bottom of the SP is a line of code that calls a function, the function queries a View. Â When I run the SP, SQL returns the data from the Union plus the data from the select statement on the Function. Â This all works but I can't get the data returned by the function query onto a browser.
I am doing it this was as the parameters in my SP are also used when calling the function, works really well. Â Is GTotal a return value?
Here is my function:
USE [LOGONs]
GO
/****** Object: Â UserDefinedFunction [dbo].[FX_AnnaulBudget1] Â Â Script Date: 23/09/2015 12:27:50 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
...and here is my SP:
USE [LOGONs]
GO
/****** Object: Â StoredProcedure [dbo].[USP_AnnualBudget] Â Â Script Date: 23/09/2015 12:57:46 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[USP_AnnualBudget]
[Code] .....
In t-sql 2012, I want to run a query where the value is normally an int value. I want to supply a large volume of custID values that are normally int values. I have tried to use a cast and convert values and that does not work. The query that I am trying to use is the following:
DECLAREÂ @custID varchar(200)
set @custID = '72793,60546,91069'
select * from table
where in (@custID)
Thus can you show me the t-sql 2012 that I can use to accomplish my goal?
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
In temp table there rae data which start with 1 and 2.I want to select only those record which start with 1 Zone is a parameter to the Execute sql task in ssis package..I have created sample code to test when I am running my query I am not getting anything
create table #temp
( zoneid bigint
)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(200000000000000000)
insert into #temp values(200000000000000000)
[code]...
I want to calculate year to month data for month wise . Ihave start range and end range table like below
Start range and end range table
Start dateEnd date
01-04-201401-11-2014
01-04-201401-12-2014
01-04-201401-01-2015
01-04-201401-02-2015
[Code] ....
Then I want to pass this value one by one in below table for get value month wise
Main table
Branchamountperiod
Branch110201103
Branch22201104
Branch33201401
Branch44201402
Branch58201403
Branch610201404
[Code] ....
The below query is for november month: (Apr to Nov)
select * from maintable
where period between '01-04-2014' and '01-11-2014'
then for December month : (Apr to Dec)
So I want to pass second row
select * from maintable
where period between '01-04-2014' and '01-12-2014'
.....
....
select * from maintable
where period between '01-04-2015' and '01-12-2015'
Like wise I want to get month wise data of YTM data.
My expected output is
201411
201412
201501
201502
201503
201504
201505
[Code] ....
Everything about this query works except I'm trying to capture the @companyid (which is a variable) into a column in my table via my select statement.
My error is Invalid column name 'A113', etc. However it is the A113 I'm trying to insert into the first column of the table SAP_GLsummary
-- retrieves a list of gl balances from all companies
truncate table sap_glsummary
declare @companyID char(6)
declare c_company cursor for
select INTERID from dbo.GP_Interid
open c_company fetch next from c_company into @companyID
[Code] .....
I have a function which accepts table parmeter. i have created a view and i need to use this function.
How can i do it. how can i pass dim table into the @table variable
select * from dim cross apply fnc_user(@table variable)